Power Entry Modules (PEM)

<p>The Schurter 4302.5002 is a power entry module combining an IEC 320-C14 appliance inlet, a 1-pole non-illuminated rocker switch, and an EMI/RFI line filter in a single panel-mount package. It is designed for commercial equipment requiring protection class I grounding and electromagnetic interference suppression.</p><p>&nbsp;</p><p>Electrical ratings include a nominal current of 2A at 250VAC, with the series supporting 1-10A depending on configuration. The integrated filter provides standard leakage current below 0.5mA at 250V/60Hz and dielectric strength exceeding 1.7kVDC between line-neutral and 2.7kVDC between line/neutral and protective earth. Operating temperature range is -25°C to 85°C.</p><p>&nbsp;</p><p>The module mounts to a panel via screw-on flanges, requiring a rectangular cutout of 29.00mm x 33.00mm and accepting panel thickness up to 8mm. Termination is via quick connect tabs (0.250" / 6.3mm). The housing is black thermoplastic rated UL94 V-0, and the front side offers IP40 ingress protection. The component is shielded for additional EMI containment.</p>

<p>The Schurter 4302.2004 is an IEC 320-C14 appliance inlet power entry module from the KEB2 series. It integrates a 2-pole non-illuminated rocker switch and a Class I protected inlet into a single panel-mount unit. The module is rated for 10A at 250VAC under IEC standards and 15A at 250VAC under UL/CSA standards, making it suitable for a variety of commercial and industrial power applications.</p><p>&nbsp;</p><p>The housing is constructed from black thermoplastic with a UL94 V-0 flammability rating, ensuring durability and safety. The front side offers IP40 ingress protection. Quick connect terminals (4.8 x 0.8 mm) provide easy and reliable wiring. The module mounts via snap-in to panel thicknesses of 1.5, 2.0, or 2.5 mm, or via screw-on mounting. The component is rated for operation over a temperature range of -25°C to 70°C.</p><p>&nbsp;</p><p>Design considerations: This module is unfiltered and does not accommodate a fuse. It is designed for use with Protection Class I equipment. Certifications include CCC, CSA, UL, and VDE. For new designs, Schurter recommends the DC11 series as an alternative.</p>

<p>The Schurter 4302.0004 is a power entry module featuring an IEC 320-C14 appliance inlet with a built-in 1-pole on-off rocker switch. It is rated for 10A at 250VAC and designed for panel mount snap-in installation with a panel thickness of 2.5mm.</p><p>&nbsp;</p><p>The module offers quick connect terminals (4.8x0.8mm) for easy wiring. It provides IP40 protection on the front side and is constructed with a UL94 V-0 rated thermoplastic housing. The part is suitable for equipment requiring protection class I according to IEC 61140.</p><p>&nbsp;</p><p>Electrical characteristics include dielectric strength of 3kV between L-N and 4kV between L/N-PE. The operating ambient temperature range is -25°C to +70°C. This unfiltered version is approved by CCC, CSA, ENEC, and UL.</p>

<p>The Qualtek 701W-X2/02 is an IEC 60320 C14 universal snap-in AC power inlet designed for panel mounting. It features a nylon body, brass tin-plated contacts, and solder eyelet termination. The device is rated for 15A at 250VAC under UL/CSA standards and 10A at 250VAC under VDE/CCC standards.</p><p>&nbsp;</p><p>Key electrical specifications include an insulation resistance of over 100 MΩ at 500 VDC and a dielectric strength of 2000 VAC for one minute. The connector style is IEC 320-C14 with a receptacle, male blades configuration. It accepts panel thicknesses from 0.81 mm to 1.50 mm, with a rectangular panel cutout of 27.00 x 20.00 mm.</p><p>&nbsp;</p><p>This power inlet does not accommodate a fuse and is classified as an unfiltered commercial grade component. It has approvals from CCC, CSA, UL, and VDE. The body material is nylon, and the contact material is brass with tin plating. The part is RoHS3 compliant and REACH unaffected, with no SVHC above 0.1%.</p>

<p>The Schurter 4301.3212 is a KEA-Print series IEC 320-C14 power entry module designed for power supply input applications. It is a 3-position receptacle with male blades, rated 10A at 250VAC under both IEC and UL/CSA standards. The module includes a 1- or 2-pole fuse holder for 5x20mm fuse-links (fuses not included) and meets the requirements of IEC 60335-1 for unattended appliances, including glow wire tests per IEC 60695-2-11.</p><p>&nbsp;</p><p>Electrical characteristics include a dielectric strength of&gt;3 kVAC between L-N and&gt;4 kVAC between L/N-PE, with an operating temperature range of -25°C to 70°C. The front side is rated IP40 per IEC 60529, and the module is suitable for protection class I equipment per IEC 61140. The housing is made of thermoplastic, UL94 V-0 rated, with approvals from CCC, CSA, ENEC, and UL.</p><p>&nbsp;</p><p>Mechanically, the module supports panel mount snap-in or through-hole right-angle mounting with solder terminals. The panel cutout is rectangular 27.60mm x 31.60mm, and the panel thickness for snap-in is 1.5mm, 2mm, or 2.5mm. The V-Lock notch is standard for cord retention, and the design is suitable for medical applications and equipment per IEC/UL 62368-1.</p>

<p>The Schurter 6220.2100 is an IEC 320-C14 appliance inlet with an integrated 2-pole fuse holder for 5x20mm fuses. It is rated for 10A at 250VAC and is unfiltered, making it suitable for commercial applications where line filtering is not required.</p><p>&nbsp;</p><p>This power entry module features a panel mount design with screw-on mounting from the front or rear side. Termination is via solder eyelet terminals. The front side offers IP40 protection, and the housing is made of thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical characteristics include a dielectric strength greater than 2kVAC between L-N and L/N-PE. The operating temperature range is -25°C to 70°C. It meets the requirements of IEC 60335-1 for appliances in unattended use and is suitable for protection class I equipment. Approvals include CCC, CSA, ENEC, and UL.</p>

<p>The Qualtek 761-18/003 is a power entry module (PEM) designed for AC power input applications. It features an IEC 320-C14 receptacle with male blades, providing a standardized interface for detachable power cords. This module is panel mount with snap-in installation, making it easy to integrate into enclosures.</p><p>&nbsp;</p><p>Electrically, the module is rated for 6 A at 115/250 VAC over a frequency range of 48-440 Hz. It has a hipot rating of 2000 VDC line-to-ground and line-to-line, and a minimum insulation resistance of 10 MOhm at 500 VDC. The module is unfiltered, suitable for applications where external filtering is employed.</p><p>&nbsp;</p><p>Mechanically, it requires a rectangular panel cutout of 66.04 mm x 27.00 mm and accepts panel thicknesses from 1.02 mm to 1.78 mm. Terminals are quick connect 0.157" for easy wiring. The module includes an SPST on-off switch and a single 5x20mm fuse holder (fuse not included).</p><p>&nbsp;</p><p>This PEM is commonly used in power supplies, instrumentation, and industrial equipment where a switched and fused IEC inlet is needed. It is RoHS compliant and carries approvals from CSA, SEMKO, and UL.</p>

<p>The Qualtek 762-18/002 is a multi-function power entry module designed for commercial equipment requiring a compact, integrated power inlet solution. It features an IEC 320-C14 connector style with a receptacle and male blades, combining power input, an on-off switch, and a single 5x20mm fuse holder in one panel-mount unit.</p><p>&nbsp;</p><p>Electrical ratings include 6A RMS maximum at 115/250VAC over a 48-440Hz operating frequency range. The module meets minimum hipot ratings of 2000VDC line-to-ground and line-to-line, and minimum insulation resistance of 10MΩ at 500VDC. Safety approvals include CSA, SEMKO, and UL.</p><p>&nbsp;</p><p>Mechanically, the module mounts via snap-in into a rectangular panel cutout of 66.04mm x 27.00mm, accommodating panel thicknesses from 1.02mm to 1.78mm. Termination is via 0.250" (6.3mm) quick connect tabs for easy wiring. The fuse holder accepts standard 5x20mm fuses (fuse not included). The module is RoHS compliant.</p>

<p>The Power Dynamics 42R02-3212-150 is an unfiltered IEC 60320 C14 power entry module designed for commercial equipment requiring a reliable AC mains connection. The connector style is IEC 320-C14, configured as a receptacle with male blade contacts and 3 positions. It features a panel mount snap-in installation requiring a rectangular cutout of 20.00mm x 27.50mm, and accommodates a panel thickness of 1.5mm.</p><p>&nbsp;</p><p>Termination is via quick connect tabs of 0.250" (6.3mm), making it suitable for fast assembly. The insulator is made of polycarbonate rated UL94 V-0 for flammability, and the contacts are brass with tin plating over nickel. Electrical ratings include a general current rating of 10A and a higher rating of 15A at 70°C for the 2+Ground circuit configuration, with a voltage rating of 250VAC.</p><p>&nbsp;</p><p>This component carries approvals from CSA, UL, and VDE, and is RoHS3 compliant. As an unfiltered commercial type, it is intended for applications where EMI filtering is handled separately or not required. The compact snap-in design simplifies mounting in panels and enclosures.</p>

<p>The Schurter 5110.0143.3 is an IEC 320-C14 appliance inlet with integrated EMI/RFI filter. It features a panel mount snap-in design and quick connect terminals (0.250" / 6.3mm). This power entry module is rated for 1A at 250VAC and offers both standard and medical filter versions, with leakage current less than 0.5mA (standard) or less than 5µA (medical). The filter includes a 100nF CX capacitor.</p><p>&nbsp;</p><p>Electrical characteristics include dielectric strength of &gt;1.7kVDC between L-N and &gt;2.7kVDC between L/N-PE. The operating temperature range is -25°C to 85°C, with climatic category 25/085/21 per IEC 60068-1. The component is IP40 rated on the front side and is suitable for protection class I applications.</p><p>&nbsp;</p><p>Approvals include CCC, cULus, and ENEC, with a flammability rating of UL94 V-0. The part is RoHS3 compliant and REACH unaffected (unverified). It is designed for use in commercial and medical equipment, meeting IEC/UL 60601-1 for medical devices.</p>

<p>The Schurter 4784.0000 is an IEC 320-C15 power entry plug designed for rewireable connections. It features female sockets in a 3-position configuration, with a right angle cable entry (90°) for space-saving installations. The plug is rated for 10A under VDE and 15A under UL/CSA standards at 250VAC, making it suitable for a variety of commercial and industrial applications.</p><p>&nbsp;</p><p>Constructed with a PA6 body (UL94 V-0 rated) and brass contacts, the 4784.0000 offers robust durability. It accepts a maximum wire size of 1.0 mm² and uses screw termination for secure wiring. The free hanging (in-line) mounting style, combined with the right angle cable entry, allows for flexible routing in tight spaces.</p><p>&nbsp;</p><p>This plug is unfiltered (commercial grade) and is approved by cULus and VDE. It operates in temperatures up to 120°C and is classified as Protection Class I. The 4784 series from Schurter is part of the PLUG MATES rewireable family, with enhanced captive internal contacts for easier assembly.</p>

<p>The Schurter 4301.5013 is a filtered IEC 320-C14 power entry module from the KFA series. It integrates a panel-mount receptacle, EMI/RFI filter, and a fuseholder for 5x20mm fuses (1- or 2-pole, drawer sold separately). The connector is rated for 10A maximum at 250VAC (IEC and UL/CSA). It features a panel mount with flange mounting and quick connect 0.250" (6.3mm) terminals. The ingress protection rating is IP40 on the front side. The module operates over a temperature range of -25°C to 85°C.</p><p>&nbsp;</p><p>An EMI/RFI commercial line filter with standard leakage current &lt;0.5mA (medical version &lt;5µA) is incorporated. Dielectric strength is &gt;1.7kVDC between L-N and &gt;2.7kVDC between L/N-PE. Capacitance CX is 100nF. The module is suitable for protection class I applications per IEC 61140.</p><p>&nbsp;</p><p>Approvals include CCC, cULus, and ENEC. The part is RoHS3 and REACH unaffected compliant (unverified). MSL is 1. The fuse holder drawer is sold separately. The manufacturer also offers a medical-grade variant with low leakage current suitable for IEC/UL 60601-1 applications.</p>

<p>The TE Connectivity 20SRB1 is a filtered power entry module featuring an IEC 320-C20 receptacle with male blades. It is rated for 20A at 120/250VAC and includes commercial-grade EMI/RFI filtering to reduce conducted interference. The module is designed for panel mounting with a flange and offers front or rear side mounting flexibility. Termination is via quick connect tabs (0.250" / 6.3mm). The 3-position connector accommodates line, neutral, and ground. Compliance with CSA, UL, and VDE standards ensures suitability for global applications. This module does not include a fuse holder. It is RoHS3 compliant and has an MSL of 1 (unlimited). Typical applications include power supplies, industrial equipment, and medical devices requiring filtered AC input.</p>

<p>The Qualtek 710W-00/01 is an IEC 60320 C13 (IEC 320-2-2/F) AC power outlet designed for panel mount applications with a flange screw mount. It features a black PBT housing and brass, tin-plated solder eyelet terminals.</p><p>&nbsp;</p><p>This unfiltered commercial-grade receptacle is rated 15A at 250VAC under UL and CSA approvals, and 10A at 250VAC under TUV and CCC approvals. It accepts a rectangular panel cutout of 32.50mm x 25.00mm and is suitable for use in power entry systems requiring a reliable screw-mount connection.</p><p>&nbsp;</p><p>The part is RoHS3 compliant, REACH unaffected, and contains PFAS (CAS# 24920-49-3, 0.1% to 1%). It does not accommodate a fuse.</p>

<p>The Schurter 5200.0843.1 is a compact power entry module that integrates an IEC 320-C14 appliance inlet, an EMI/RFI line filter, and a 1-pole fuse holder into a single unit. It is rated for 8A continuous current at 250VAC (50/60 Hz) and is designed for panel mount snap-in installation on panels with thickness from 0.79mm to 3.00mm. The module features quick connect terminals (6.3x0.8mm) for easy wiring.</p><p>&nbsp;</p><p>The integrated filter provides effective attenuation of electromagnetic interference, with a maximum leakage current of less than 0.5 mA at 250V/60Hz. Dielectric strength exceeds 1.7 kVDC between line and neutral, and 2.7 kVDC between line/neutral and protective earth. The operating temperature range is -25°C to 85°C, and the front side is rated IP40 for protection against solid objects.</p><p>&nbsp;</p><p>This module is suitable for use in Class I equipment according to IEC 61140. The fuse holder accepts standard 5x20mm fuses (fuse not included). The housing material has a UL94 V-0 flammability rating. Approvals include cULus and ENEC. The module is RoHS compliant (unverified) and has an MSL of 1 (unlimited).</p>

<p>The BZM27/Z0000/57C is a power entry module from Bulgin Components, featuring an IEC 320-C14 connector style. It is a receptacle with male blades, designed for panel mount snap-in installation. The module includes an On-Off switch for convenient power control.</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC, making it suitable for standard AC mains applications. The termination style is quick connect with 0.250" (6.3mm) tabs. The panel cutout dimensions are 54.90mm x 21.30mm, and the module accommodates a panel thickness of 2.00mm.</p><p>&nbsp;</p><p>The housing material has a UL94 V-0 flammability rating. The module is unfiltered and does not accommodate a fuse. It carries approvals from CSA, ENEC, UL, and VDE.</p>

<p>The Schurter 6200.2300 is a panel-mount IEC 320-C14 power entry module designed for protection class I equipment. It features a 1-pole fuseholder accommodating 5x20mm fuses (fuse not included) and is rated for 10A at 250VAC (IEC) and 10A at 250VAC (UL/CSA). The module is unfiltered, making it suitable for applications where line filtering is handled separately.</p><p>&nbsp;</p><p>Electrical characteristics include a dielectric strength greater than 2 kVAC between L-N and between L/N-PE. The operating temperature range is -25°C to 70°C. The housing is made of thermoplastic with UL94 V-0 flammability rating, and the front side offers IP40 ingress protection.</p><p>&nbsp;</p><p>Mechanical mounting is via screw-on (panel thickness up to 6mm, screw torque max 0.5 Nm) or snap-in (panel thickness 1/1.5/2/2.5/3mm). Termination is quick connect 0.250" (6.3mm). The module includes a V-Lock notch standard and meets IEC 60335-1 requirements for unattended use.</p>

<p>The Delta Electronics 10GEEG3E is a panel mount power entry module featuring an IEC 320-C14 receptacle with male blades. It includes a commercial-grade EMI/RFI filter to reduce conducted interference on AC power lines.</p><p>&nbsp;</p><p>Rated for 10A at 115/250 VAC, this module is suitable for a wide range of AC-powered equipment. The panel mount flange design allows secure installation with a rectangular cutout of 28.45 mm x 21.60 mm. Quick connect terminals simplify wiring and reduce assembly time.</p><p>&nbsp;</p><p>Approved by CSA, UL, and VDE, the 10GEEG3E meets international safety standards for power entry components. It does not accommodate a fuse, making it a straightforward filtered inlet solution.</p>

<p>The Schurter 4797.0015 is an IEC 320-2-2/J appliance outlet receptacle designed for panel mount snap-in installation. It features 3 female socket positions and quick connect 0.250" (6.3mm) terminals. The housing is made of black thermoplastic rated UL94 V-0. This unfiltered commercial-grade outlet is rated for 16A at 250VAC per IEC and 20A at 250VAC per UL/CSA. Dielectric strength is 2.5 kVAC between line and neutral and 3 kVAC between line/neutral and protective earth. The operating temperature range is -25°C to 70°C. It is suitable for protection class I equipment and is compatible with V-Lock, P-Lock, and Twylock locking systems. Approvals include CCC, cURus, and ENEC.</p>

<p>The Schurter 4301.2022 is an IEC 320-C14 appliance inlet from the KEA series, designed as a compact, unfiltered power entry module.</p><p>&nbsp;</p><p>This component integrates three functions: a Class I appliance inlet per IEC 60320-1, a fuseholder for 5x20mm fuses (1- or 2-pole, fuses not included), and optional voltage selector capability. It uses quick connect terminals (4.8 x 0.8 mm) and mounts via snap-in to a rectangular panel cutout of 27.50mm x 31.50mm (1.50mm panel thickness). The housing is black thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Rated at 10A / 250VAC (both IEC and UL/CSA), the module maintains IP40 front-side protection and is suitable for use in equipment per IEC/UL 62368-1 and IEC 60335-1 for unattended appliances. It accepts V-Lock cord retention and operates from -25°C to 70°C.</p>

<p>The Schurter 4301.5204 is a compact power entry module (PEM) integrating an IEC 320-C14 inlet, an EMI filter, and a fuseholder for 5x20mm fuses (1- or 2-pole) in a panel-mount package. It supports two mounting styles: screw-on (front or rear side) and snap-in (front side). An optional voltage selector (step switch, 3 positions) is available for multi-voltage applications.</p><p>&nbsp;</p><p>Electrical ratings are 2A at 250VAC (IEC/UL). The integrated EMI filter includes a 100 nF across-line capacitor (CX) and provides leakage current as low as &lt;0.5 mA (standard) or &lt;5 µA (medical version). Dielectric strength exceeds 1.7 kVDC (L-N) and 2.7 kVDC (L/N-PE). Operating temperature range is -25°C to 85°C, with a climatic category of 25/085/21 per IEC 60068-1. Front side ingress protection is IP40.</p><p>&nbsp;</p><p>Termination is via quick connect 0.250" (6.3mm) tabs; flexible wire AWG18 options are available. The module features a V-Lock notch for cord retention and complies with protection class I (IEC 61140). The medical version is suitable for use in medical equipment per IEC/UL 60601-1 (1 MOOP, 1 MOPP). For applications per IEC/UL 62368-1, variants with a bleed resistor are recommended. The fuseholder drawer is sold separately.</p>

<p>The Schurter 4301.0521 is a KEA series IEC 320-C14 appliance inlet module designed for panel mount applications. It combines three functions: an IEC C14 inlet, a fuseholder for 5x20mm fuses (1- or 2-pole), and an optional voltage selector. The module is rated for 10A at 250VAC (IEC and UL/CSA) and features quick connect terminals (4.8 x 0.8mm).</p><p>&nbsp;</p><p>The housing is made of black thermoplastic with a UL94 V-0 flammability rating and offers IP40 front-side protection. The module supports screw-on mounting (front or rear) or snap-in mounting, with panel thickness up to 8mm for screw mount or 1.5/2/2.5mm for snap-in. It is suitable for protection class I equipment and meets IEC/UL 62368-1 requirements.</p><p>&nbsp;</p><p>This unfiltered version is ideal for applications where line filtering is not required, and the integrated fuseholder provides overcurrent protection. The V-Lock notch ensures secure cord retention.</p>