Power Entry Modules (PEM)

<p>The Schurter 5120.1003.0 is a power entry module with integrated EMI/RFI line filter. It features an IEC 320-C14 receptacle with male blades, panel mount with flange, and quick connect 0.250" (6.3mm) terminals. The shielded design provides effective noise suppression for commercial applications.</p><p>&nbsp;</p><p>The module is rated for 4A at 250VAC (IEC 1-10A, UL 1-15A) and offers low leakage current: less than 0.5mA in standard versions and less than 5µA in medical versions. Dielectric strength is greater than 1.7kVDC between L-N and greater than 2.7kVDC between L/N-PE. Operating temperature range is -25°C to 85°C with IP40 protection on the front side.</p><p>&nbsp;</p><p>Mounting options include snap-in for panel thickness 0.8-2mm or screw mounting with plastic flange up to 8mm panel thickness. The module is suitable for protection class I or II installations. Material flammability rating is UL94 V-0. Approvals include CCC, cULus, and ENEC. The design meets medical equipment standards IEC/UL 60601-1 (1 MOOP, 1 MOPP) and is compatible with IEC/UL 62368-1 applications when using bleed resistor variants.</p>

<p>The Schurter 6100.3100 is an IEC 320-C14 appliance inlet receptacle from the 6100-3 series. It accepts a male plug and provides a panel-mount solution with screw-on mounting from the front or rear side, accepting panel thickness up to 8 mm (or 3 mm with the optional sealing kit). Termination is via solder eyelet or quick-connect terminals. The housing is black thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The inlet is rated 10 A / 250 VAC under IEC and 15 A / 250 VAC under UL/CSA. Dielectric strength exceeds 2 kVAC between L-N and between L/N-PE. Operating temperature range is -25 °C to 70 °C. Front side protection is IP40 (IP54 with optional sealing kit). Protection class I per IEC 61140. No fuse accommodation. Applicable standards include IEC 60320-1, UL 60320-1, and CSA C22.2 no. 60320-1. The part has approvals from CCC, cULus, and ENEC. It meets increased glow wire test requirements per IEC 60695-2-12 and -13.</p>

<p>The Schurter 4304.6028 is a panel-mount power entry module designed for IEC 60320-1 C14 appliance inlets. It provides a rated current of 10 A and a voltage rating of 250 VAC at 50/60 Hz. This unfiltered commercial-grade module is intended for applications where electromagnetic interference filtering is not required.</p><p>&nbsp;</p><p>The module features a snap-in panel mount for secure front-side installation, with a rectangular panel cutout of 26.90 mm x 31.50 mm and accommodates panel thicknesses from 1.00 mm to 2.50 mm. The housing is made of PA6 material with UL 94 V-0 flammability rating. Solder eyelet terminals provide the electrical connection.</p><p>&nbsp;</p><p>An integrated fuseholder drawer (Fingergrip design) accepts two 5 x 20 mm fuse-links (fuses not included). The module is suitable for appliances with protection class I or II according to IEC 61140 and meets glow wire test requirements of IEC 60695-2-11/12/13 per IEC 60335-1 for unattended use.</p>

<p>The Schurter 6110.3300 is an IEC 320-C16 appliance inlet receptacle designed for panel mount applications. It features a screw-on flange mounting with a maximum panel thickness of 8 mm and a mounting screw torque of 0.5 Nm. The connector accepts quick connect 0.250" (6.3 mm) terminals and is rated for 10 A at 250 VAC per IEC standards and 15 A at 250 VAC per UL/CSA standards. It is suitable for protection class I equipment and offers IP40 front-side protection. The housing is made of black thermoplastic with UL94 V-0 flammability rating. Operating temperature range is -25°C to 120°C. This unfiltered receptacle does not accommodate a fuse. It is approved by CCC, cULus, and ENEC. The 6110.3300 is a substitute for Schurter types 0161, 0163, and 0164.</p>

<p>The Qualtek 857-01/005 is a filtered IEC 320-C14 power entry module designed for panel mount applications. It features a male blade receptacle with three positions and quick connect termination for easy installation.</p><p>&nbsp;</p><p>This module includes integrated EMI/RFI filtering for commercial applications, helping to reduce conducted interference. It is rated for 1A at 115/250 VAC, making it suitable for a variety of low-power equipment.</p><p>&nbsp;</p><p>Mechanically, the part uses a panel mount with flange and requires a rectangular cutout of 28.45 mm x 21.59 mm. It is approved by CSA, UL, and VDE agencies.</p><p>&nbsp;</p><p>The module does not accommodate a fuse. Termination style is quick connect.</p>

<p>The Schurter 6162.0159 is an IEC 320-C14 power entry receptacle designed for panel mount installation with a flange. It accepts male blade connectors and provides 3 positions for line, neutral, and ground connections.</p><p>&nbsp;</p><p>The unfiltered commercial-grade device is rated for 10A at 250VAC and terminates via 0.250 inch (6.3mm) quick connect tabs. The rectangular panel cutout measures 27.60mm x 19.90mm. A V-Lock notch feature helps secure the mating plug.</p><p>&nbsp;</p><p>The housing is molded from material rated UL94 V-0 for flammability, and the unit carries an IP20 ingress protection rating. Approvals include cCSAus, ENEC, and UL.</p>

<p>The Schurter 6610.4014 is an IEC 320-2-2/F appliance outlet power entry module designed for panel mount snap-in installation. It features IDC terminals for efficient wiring of solid wires (14-12 AWG or 1-2.5 mm²), reducing labor costs. The connector is rated 10A/250VAC per IEC and 15A/250VAC per UL/CSA, with a pin temperature of 70°C. It offers IP40 ingress protection on the front side and is suitable for protection class I equipment. The housing is made of black thermoplastic with UL94 V-0 flammability rating. Additional features include a light pipe and terminating cover. This module is ideal for power distribution units (PDUs) and other industrial applications requiring reliable IEC connections.</p>

<p>The Schurter 6100.3200 is an IEC 60320-1 C14 appliance inlet designed for panel mount applications. It accepts a maximum panel thickness of 8 mm (3 mm with sealing kit) and is secured with screw-on mounting from the front or rear side. The connector offers two termination options: solder terminals and quick-connect tabs (0.189" / 4.8 mm).</p><p>&nbsp;</p><p>Electrically, the inlet is rated 10 A at 250 VAC (IEC, 50 Hz) and 15 A at 250 VAC (UL/CSA, 60 Hz). Dielectric strength exceeds 2 kVAC between line-neutral and between line/neutral and protective earth. The pin temperature is rated at 70 °C, with an allowable operating temperature range of -25 °C to 70 °C.</p><p>&nbsp;</p><p>The housing is made of black thermoplastic with a UL94 V-0 flammability rating. The front side achieves IP40 ingress protection, which can be upgraded to IP54 with an optional sealing kit. This part is suitable for protection class I equipment and carries approvals from CCC, cULus, and ENEC.</p>

<p>The Schurter DF11.2078.0010.01 is a power entry module from the DF11 series, combining an IEC 320-C14 appliance inlet with a 2-pole circuit breaker and a rocker switch in a single assembly. It is designed for panel mount installation with screw or snap-in fixing options. The module accepts quick connect terminals (6.3x0.8mm) and provides a 3-position (line, neutral, ground) connection.</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC per IEC and 15A at 250VAC per UL/CSA, with dielectric strength exceeding 2.5kVAC between L-N and 3kVAC between L/N-PE. The operating temperature range is -10°C to 55°C, and the front side offers IP40 protection. The housing is made of black thermoplastic rated UL94 V-0, and the pin temperature is rated for 70°C.</p><p>&nbsp;</p><p>This module is suitable for appliances with protection class I or II according to IEC 61140 and carries cULus and ENEC approvals. The panel cutout is rectangular 29.00mm x 73.50mm, with panel thickness up to 8mm for screw mounting or 1-3mm for snap-in mounting. The module is unfiltered, making it ideal for applications where external filtering is required or noise is not a concern.</p>

<p>The Bulgin BZV49/Z0000/01 is a power entry module designed for AC power connections. It provides an IEC 320-C20 male blade receptacle in a panel mount, snap-in package. This module is rated for 16A continuous current at 250VAC. It is an unfiltered commercial-grade module, suitable for applications where EMI filtering is not required. The module includes a single-pole on-off switch for convenient power control. Termination is via quick connect tabs of 0.250" (6.3mm) size. The panel cutout is rectangular, 34.40mm x 56.00mm, and accepts panel thicknesses from 1.00mm to 3.00mm. The housing is made of material with UL94 V-0 flammability rating. This module does not accommodate a fuse. It is approved by CSA, ENEC, UL, and VDE agencies. The module is designed for easy snap-in installation, reducing assembly time.</p>

<p>The Delta Electronics 06AN2 is a power entry module designed for AC power input applications. It features an IEC 320-C14 connector style with a receptacle accepting male blades. The module includes an integrated on-off switch and a fuse holder (fuse not included) for circuit protection.</p><p>&nbsp;</p><p>This module mounts to a panel using a snap-in mechanism and requires a rectangular cutout of 66.00mm x 27.00mm. It accommodates panel thicknesses from 1.02mm to 1.78mm. Termination is via quick connect tabs for easy wiring.</p><p>&nbsp;</p><p>The housing is made of material rated UL94 V-0 for flammability. The module carries approvals from CE, CSA, SEMKO, and UL, indicating compliance with international safety standards. It is classified as an unfiltered commercial-grade component.</p>

<p>The Schurter Inc. 4303.1212 is a KEC series IEC 320-C14 appliance inlet power entry module. It is a 3-position receptacle with male blades, rated for 10A at 250VAC under both IEC and UL standards (50/60 Hz). This module integrates a 1- or 2-pole fuse holder for 5x20mm or 6.3x32mm fuses (drawer sold separately) and a voltage selector step switch (2-4 digits).</p><p>&nbsp;</p><p>Designed for panel mount snap-in installation, it features quick connect terminals (0.189" / 4.8mm). The thermoplastic housing is rated UL94 V-0 and offers IP40 protection from the front side. Operating temperature range is -25°C to 70°C. It meets glow wire requirements per IEC 60695-2-12/13 and is suitable for use in equipment per IEC/UL 62368-1.</p><p>&nbsp;</p><p>This unfiltered module is ideal for industrial power supplies, medical equipment, and appliances requiring fuse protection and voltage selection. It carries approvals from CCC, CSA, ENEC, and UL. Fuse fuse drawer is not included and must be ordered separately.</p>

<p>The EAC305 is a power entry module from Conxall/Switchcraft designed to accept an IEC 320-2-2/F inlet. It features 3 female sockets (line, neutral, earth) in a panel mount flange configuration. The connector is rated for 15A at 250VAC under UL and CSA, and meets IEC 60320 specification. Termination is via solder eyelet connections, suitable for chassis wiring. The housing is made of black thermoplastic, and terminals are tin plated copper alloy. The panel cutout is rectangular, 32.39mm x 24.76mm. This is an unfiltered commercial grade module, meaning it does not include EMI filtering or a fuse holder. It is suitable for use in power supplies, medical equipment, and industrial controls where a standard IEC inlet is required. The approvals include UL and CSA, though the database also lists SEMKO and SEV, which should be verified. The part is RoHS3 compliant and has MSL 1 (unlimited).</p>

<p>The Schurter 4300.5051 is a KFS series IEC 320-C14 appliance inlet with an integrated EMI/RFI line filter. It is a panel mount, flange-mount power entry module designed for applications requiring filtered AC power input. The connector accepts male blades and provides 3 positions (L, N, PE).</p><p>&nbsp;</p><p>Electrically, it is rated for 1A at 250VAC (with series rating up to 10A at 40°C). Leakage current is less than 0.5mA at 250V/60Hz. Dielectric strength exceeds 1.7kVDC between L-N and 2.7kVDC between L/N-PE. Impulse withstand voltage is &gt;2.5kV L-N and &gt;5kV L/N-PE. Operating temperature range is -25°C to 85°C. The module is IP40 rated on the front side and has a climatic category of 25/085/21.</p><p>&nbsp;</p><p>Mounting is via screw-on flange with a maximum panel thickness of 8mm and mounting torque of 0.5Nm. Terminals are quick connect type with 6.3mm width and 0.8mm thickness. The housing is made of thermoplastic with UL94 V-0 flammability rating. Protection class is I (grounded). The part is shielded and does not accommodate a fuse.</p><p>&nbsp;</p><p>This module is suitable for applications requiring compliance with IEC/UL 62368-1 (with recommended variants with bleed resistor). It holds approvals from cULus and ENEC, and is designed for use in standard equipment requiring EMI filtering. The connector features a notch for V-Lock latching cordset to prevent accidental disconnection.</p>

<p>The TE Connectivity 6EBF1 is a filtered power entry module featuring an IEC 320-C14 receptacle with male blades. It is designed for panel mount installation with a flange and provides quick connect termination of 0.250" (6.3mm).</p><p>&nbsp;</p><p>Rated for 6A continuous current at 120/250VAC, this module includes commercial-grade EMI/RFI filtering to reduce conducted interference. It accommodates 3 positions and does not include a fuse holder.</p><p>&nbsp;</p><p>The panel cutout is rectangular, measuring 35.56mm x 25.65mm. The module is approved by CSA, UL, and VDE. RoHS3 compliance is claimed but unverified; MSL level 1 and REACH unaffected are also noted.</p>

<p>The Schurter 4302.2003 is a power entry module (PEM) combining an IEC 320-C14 appliance inlet with a 2-pole rocker switch, designed for panel mount applications. It is part of the KEB2 series, suitable for protection class I equipment.</p><p>&nbsp;</p><p>Electrical ratings: 10A at 250VAC (IEC 50 Hz) and 15A at 250VAC (UL/CSA 60 Hz). Dielectric strength exceeds 2.5 kVAC between L-N and 3 kVAC between L/N-PE. Operating temperature range -25°C to 70°C.</p><p>&nbsp;</p><p>The module features quick connect terminals (0.189" / 4.8mm) and snap-in panel mounting. Panel cutout is rectangular 27.50mm x 42.00mm, with panel thickness up to 2.00mm. Housing is black thermoplastic rated UL94 V-0. IP40 protection on front side.</p><p>&nbsp;</p><p>This unfiltered version is ideal for applications requiring a switched IEC inlet without line filtering. It has approvals from CCC, CSA, UL, VDE. Note: The manufacturer recommends the DC11 series for new designs.</p>

<p>This power entry module from TE Connectivity features an IEC 320-C14 connector style. It is a receptacle with male blades, designed for panel mounting via snap-in. The module includes a filtered (EMI/RFI) commercial-grade filter, a switch for on-off control, and a twin fuse holder accommodating fuses (not included). Electrical ratings are 3A current and 120VAC voltage. Termination is via quick connect tabs of 0.187 inches. The panel cutout is variable size, accommodating panel thicknesses from 0.031 to 0.114 inches. The module is shielded and has approvals from CSA, UL, and VDE. It is suitable for use in power supplies, industrial equipment, and other applications requiring a filtered and switched AC inlet.</p>

<p>The BZV03/Z0000/06 is a power entry module from Bulgin Components featuring an IEC 320-C14 connector style. It is a receptacle with male blades designed for panel mount snap-in installation. The module includes an on-off switch and a twin fuse holder accommodating two fuses (fuses not included).</p><p>&nbsp;</p><p>Electrical ratings are 10A nominal current and 250VAC nominal voltage. The termination style is quick connect using 0.250" (6.3mm) tabs. The panel cutout is rectangular measuring 34.40mm x 76.50mm and accepts panel thickness from 1.00mm to 3.00mm.</p><p>&nbsp;</p><p>The housing material has a UL94 V-0 flammability rating. The module is unfiltered and intended for commercial applications. It holds approvals from CSA, ENEC, UL, and VDE.</p>

<p>The Schurter DD22.4321.1111 is a power entry module designed for commercial and medical equipment requiring EMI/RFI filtering. It integrates an IEC 320-C14 receptacle, a single-pole on-off switch, and a filtered line input in one compact module.</p><p>&nbsp;</p><p>Rated for 4A at 250VAC, this module provides basic electromagnetic interference suppression suitable for many low-power applications. The connector style is IEC 320-C14 with male blade contacts. Mounting options include panel mount with flange or through-hole right-angle solder terminals, plus quick-connect tabs (0.250").</p><p>&nbsp;</p><p>The module accommodates a fuse (not included) with a separate fuse drawer sold separately. It carries an IP40 ingress protection rating and uses UL94 V-0 rated materials. Approvals include cULus and ENEC.</p>

<p>The Bulgin BVB01/Z0000/11 is a power entry module featuring an IEC 320-C14 receptacle with male blades. It is designed for panel mount installation with a flange and uses quick connect terminals (0.250" / 6.3mm). This module includes a switch (On-Off) and a fuse holder (fuse not included). It is categorized as an unfiltered commercial type.</p><p>&nbsp;</p><p>Electrically, the module is rated for 10A at 250VAC. It accommodates 3 positions (Line, Neutral, Ground). The panel cutout dimensions are rectangular 33.00mm x 66.30mm. The material flammability rating is UL94 V-0.</p><p>&nbsp;</p><p>Approvals include CSA, ENEC, UL, and VDE. The module is RoHS3 compliant (unverified) and REACH unaffected (unverified). The moisture sensitivity level is MSL 1 (unlimited).</p><p>&nbsp;</p><p>This power entry module is suitable for applications requiring a switched IEC inlet with fuse protection in a compact panel-mount package.</p>