Power Entry Modules (PEM)

<p>The BZV01/A0620/01 is a panel-mount power entry module from Bulgin Components, featuring an IEC 320-C14 receptacle with male blades. It is a filtered (EMI/RFI) commercial-grade module, designed to suppress electrical noise in power lines.</p><p>&nbsp;</p><p>The module includes a single-pole On-Off switch and accommodates a fuse (fuse not included) for overcurrent protection. It is rated for 6A at 250VAC and terminates via quick connect tabs (0.250" / 6.3mm).</p><p>&nbsp;</p><p>Mounting is by snap-in panel installation into a rectangular cutout of 34.40mm x 56.60mm, accommodating panels 1.00mm to 3.00mm thick. The housing material is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>Approved by CSA, ENEC, UL, and VDE, this module is suited for industrial and commercial equipment requiring a compact, integrated mains input with filtering and switching.</p>

<p>This is a Bulgin BZH01/Z0000/02 power entry module (PEM) featuring an IEC 320-C14 receptacle with male blades. It is designed for panel mount snap-in installation and includes an on-off switch and a fuse holder (fuse not included). The module is unfiltered and intended for commercial applications.</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC. Termination is via quick connect tabs of 0.250" (6.3mm). The panel cutout is rectangular 60.30mm x 34.40mm, accommodating panel thickness from 1.00mm to 3.00mm. The housing material has a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This PEM is suitable for power entry in various equipment requiring a switched and fused IEC inlet. The snap-in mounting simplifies assembly. Approvals include CSA, ENEC, UL, and VDE.</p>

<p>The Schurter DD12.6111.111 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-pole line switch, a fuseholder for 5x20 mm fuses (fuse and drawer sold separately), and an EMI/RFI line filter in a single assembly. This module is rated for 6A current and 250VAC voltage, with a maximum leakage current of 0.5 mA (standard version).</p><p>&nbsp;</p><p>Designed for panel mount installation with screw-on mounting from the front side, the unit uses quick connect terminals of 0.250" (6.3mm). It features a V-Lock notch for cord retention and an aluminum case providing good shielding. The DD12 series is known for its ultra-compact design suitable for low profile applications.</p><p>&nbsp;</p><p>The module operates over a temperature range of -25°C to 85°C and carries an IP40 protection rating. It is approved by cURus and ENEC agencies. The material flammability rating is UL94 V-0. Electrical characteristics include a dielectric strength of 1.7 kVDC between L-N and 2.7 kVDC between L/N-PE. The climatic category per IEC 60068-1 is 25/085/21.</p>

<p>The Schurter DD12.8121.111 is a compact power entry module combining an IEC 320-C14 inlet, 2-pole line switch, 1- or 2-pole fuseholder for 5x20mm fuses, and an EMI/RFI filter in a single panel-mount package. It is rated for 8A at 250VAC (IEC/UL) and features quick connect terminals (0.250" / 6.3mm). The module includes a V-Lock notch for cord retention, an earth line choke, and a shielded aluminum case for enhanced EMI suppression.</p><p>&nbsp;</p><p>Electrical specifications include a leakage current of &lt;0.5 mA (standard) or &lt;5 µA (medical version), dielectric strength of 1.7 kVDC (L-N) and 2.7 kVDC (L/N-PE), and an operating temperature range of -25°C to 85°C. The module is rated IP40 and has a flammability rating of UL94 V-0. It is approved by cURus and ENEC, and complies with RoHS and REACH.</p><p>&nbsp;</p><p>The DD12 series is designed for screw-on front panel mounting with a rectangular cutout of 29.80mm x 49.30mm and accepts panel thickness up to 8.00mm. The fuseholder is sold separately. This module is suitable for use in medical equipment (medical version available) and applications requiring high transient loads.</p>

<p>The Schurter 4787.1000 is a panel mount IEC appliance outlet conforming to the IEC 320-2-2/F standard. It accepts a 3-position female socket configuration and is designed for screw-on mounting from the front side of a panel with thickness up to 3 mm.</p><p>&nbsp;</p><p>Electrical ratings are 15 A at 250 VAC under UL/CSA and 10 A at 250 VAC under IEC with a dielectric strength greater than 2 kVAC between L-N and between L/N-PE. The operating temperature range is -25°C to 70°C.</p><p>&nbsp;</p><p>The connector offers solder terminals and a mounting screw torque of max 0.5 Nm. It is rated IP30 for front side protection and is suitable for Protection Class I applications. Housing material is black thermoplastic with a UL94 V-0 flammability rating. This part is unfiltered (commercial grade) and does not accommodate a fuse.</p>

<p>The Schurter DD12.2111.111 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-pole line switch, a fuseholder for 5x20mm fuses, and an EMI/RFI line filter in a single panel-mount package. It is rated for 2A at 250VAC and features a leakage current of less than 0.5 mA at 250V/60Hz. The module includes a V-Lock notch for cord retention and an earth line choke for enhanced filtering.</p><p>&nbsp;</p><p>The module is designed for screw-on panel mounting from the front side, with a rectangular cutout of 29.80mm x 49.30mm and a maximum panel thickness of 0.315 inches (8.00mm). Termination is via quick connect tabs (0.250" / 6.3mm). The housing is shielded and carries a UL94 V-0 flammability rating. The operating temperature range is -25°C to 85°C, with an IP40 protection rating.</p><p>&nbsp;</p><p>This component is suitable for applications requiring a filtered power entry solution with integrated switching and fuse protection. It is approved to cURus and ENEC standards and is RoHS3 and REACH compliant. The fuseholder drawer is sold separately.</p>

<p>The Schurter 5200.0243.1 is a compact power entry module from the 5200 series, combining an IEC 320-C14 appliance inlet, a 1-pole fuseholder for 5x20mm fuses, and an EMI/RFI line filter in a single unit. It is rated for 2A at 250VAC (40°C) and features a commercial-grade filter with leakage current below 0.5mA at 250VAC/60Hz.</p><p>&nbsp;</p><p>This module is designed for panel mount snap-in installation and accepts panel thicknesses from 0.79mm to 3.00mm. Termination is via quick connect terminals sized 6.3mm x 0.8mm. The front side is rated IP40 for protection against solid objects larger than 1mm. The housing is made of black thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The module includes a V-Lock notch for secure cord retention and is suitable for Class I equipment per IEC 61140. It operates over a temperature range of -25°C to 85°C and has a high MTBF of over 2,300,000 hours. The filter is potted for high resistance and uses a stainless steel case.</p>

<p>The Schurter DD12.8111.111 is a power entry module combining an IEC 320-C14 inlet, EMI/RFI filter, 2-pole line switch, and fuse holder for 5x20mm fuses (fuse drawer sold separately). It is designed for panel mount with screw-on mounting from the front side.</p><p>&nbsp;</p><p>Rated at 8A and 250VAC, it features a standard leakage current of less than 0.5mA at 250V/60Hz. Dielectric strength is 1.7kVDC between L-N and 2.7kVDC between L/N-PE. Operating temperature range is -25°C to 85°C with a climatic category of 25/085/21.</p><p>&nbsp;</p><p>The module uses quick connect terminals (0.250"/6.3mm) and has a rectangular panel cutout of 29.80mm x 49.30mm with a maximum panel thickness of 8.00mm. It is IP40 rated, has a UL94 V-0 flammability rating, and is approved by cURus and ENEC. Protection class I.</p><p>&nbsp;</p><p>Features include an earth line choke, shielded case, and V-Lock notch for cord retention. The switch is a 2-pole on-off type. With an MTBF of 2,000,000 hours, it is suitable for applications requiring reliable power entry with filtering and switching in a compact, low-profile design.</p>

<p>The Schurter 5200.0443.1 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 1-pole fuseholder for 5x20mm fuses, and a commercial-grade EMI/RFI line filter in a single unit. It is rated for 4A at 250VAC and designed for panel mount snap-in installation from the front side. The module uses quick connect terminals (0.250" / 6.3mm) and accommodates panel thicknesses from 0.79mm to 3.00mm with a rectangular cutout of 32.00mm x 29.00mm.</p><p>&nbsp;</p><p>The integrated filter provides standard leakage current below 0.5mA at 250V/60Hz and dielectric strength greater than 1.7kVDC between line and neutral, and greater than 2.7kVDC between line/neutral and ground. The module is rated IP40 on the front side and operates over -25°C to 85°C. It carries cULus and ENEC approvals, with a flammability rating of UL94 V-0. The V-Lock notch is standard for secure cord retention.</p>

<p>The DD12.6321.111 is a power entry module from Schurter Inc. that combines an IEC 320-C14 appliance inlet, a 2-pole line switch, a fuseholder for 1 or 2 fuses (5x20mm), and an EMI/RFI line filter in a compact, shielded aluminum case. It is designed for panel mounting with screw-on from the front side and features quick connect terminals (6.3x0.8mm).</p><p>&nbsp;</p><p>Key electrical ratings: 6A current at 250VAC (IEC/UL), with leakage current of &lt;0.5 mA (standard) or &lt;5 µA (medical version). Dielectric strength is 1.7 kVDC between L-N and 2.7 kVDC between L/N-PE. The operating temperature range is -25°C to 85°C.</p><p>&nbsp;</p><p>The module includes an earth line choke and V-Lock notch for cord retention. It accommodates a fuseholder drawer (sold separately) and has an IP40 ingress protection rating. The housing material is UL94 V-0 rated.</p><p>&nbsp;</p><p>This component is suitable for use in medical equipment per IEC/UL 60601-1 (1 MOOP, 1 MOPP) and for applications requiring high inrush current switching. It is ideal for low-profile designs due to its ultra-compact form factor.</p>

<p>The Schurter 4301.5001 is a KFA series power entry module combining an IEC 320-C14 inlet, EMI/RFI line filter, and fuseholder accommodation in a single panel-mount package. Rated for 1A at 250VAC, it provides filtered power entry for commercial equipment requiring conducted emission suppression.</p><p>&nbsp;</p><p>The module includes a commercial-grade filter with 100 nF capacitance, leakage current below 0.5 mA (standard version), and dielectric strength exceeding 1.7 kVDC between line-neutral and 2.7 kVDC between line/neutral and ground. It is designed for panel mounting with a flange and uses quick connect terminals (0.250" / 6.3mm). The housing is black thermoplastic with UL94 V-0 flammability rating and IP40 ingress protection.</p><p>&nbsp;</p><p>This component supports a fuse drawer (sold separately) for 5x20mm fuses, 1- or 2-pole. It is approved by CCC, cULus, and ENEC, and operates over -25°C to 85°C. The V-Lock notch ensures secure cord retention.</p>

<p>The Bulgin BVA01/Z0000/11 is a power entry module featuring an IEC 320-C14 receptacle with male blades. It is designed for panel mount installation with flange fixing and requires a rectangular cutout of 33.00mm x 66.30mm. The module includes an On-Off switch and a fuse holder that accommodates a fuse (not included). Terminals are quick connect type, 0.250" (6.3mm).</p><p>&nbsp;</p><p>Rated at 10A and 250VAC, this unfiltered commercial-grade module is approved by CSA, ENEC, UL, and VDE. The housing material has a UL94 V-0 flammability rating, making it suitable for a variety of power entry applications.</p><p>&nbsp;</p><p>The module is part of Bulgin's extensive range of power entry modules, offering a compact solution for integrating AC input, switching, and fuse protection into a single panel-mounted unit.</p>

<p>The Schurter Inc. DD12.4111.111 is a compact power entry module integrating an IEC 320-C14 appliance inlet, a 2-pole rocker switch, a fuseholder for 5x20mm fuses, and an EMI/RFI line filter in a single unit. It is rated for 4A at 250VAC and designed for panel mount screw-on installation from the front side. The module features quick connect terminals (6.3x0.8mm), V-Lock notch for cord retention, and a thermoplastic black housing with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical characteristics include dielectric strength greater than 1.7kVDC between L-N and 2.7kVDC between L/N-PE, leakage current less than 0.5mA (standard) or less than 5µA (medical), and protection class I. The operating temperature range is -25°C to 85°C with a climatic category of 25/085/21. The filter is available in standard and medical versions, with the medical version meeting IEC/UL 60601-1 requirements.</p><p>&nbsp;</p><p>The module accommodates 1- or 2-pole fuseholders (Shocksafe PC2) and supports fuse power acceptance of 2W per pole (1-pole) or 1.6W per pole (2-pole). The switch is a non-illuminated rocker type, suitable for highest inrush current applications. The DD12 series is ideal for low-profile designs and applications requiring high transient loads, such as power supplies, medical equipment, and industrial controls.</p>

<p>The DD11.0114.1111 is a power entry module (PEM) from Schurter Inc., designed as an IEC 320-C14 appliance inlet. It integrates a 2-pole illuminated on-off switch and a fuseholder for 5x20mm fuses (fuse drawer sold separately). This module is unfiltered and intended for commercial applications.</p><p>&nbsp;</p><p>Rated for 10A at 250VAC (IEC/UL), it features quick connect terminals (0.189" / 4.8mm) and panel mount with screw-on mounting up to 8mm panel thickness. The housing is black thermoplastic with UL94 V-0 flammability rating. Protection class I according to IEC 61140. IP40 front side protection.</p><p>&nbsp;</p><p>The module includes a V-Lock notch for secure cord retention. It meets glow wire test requirements per IEC 60695-2-11/12/13 and is suitable for use in equipment per IEC/UL 62368-1. Operating temperature range is -25°C to 85°C. Dielectric strength is 2.5kVAC between L-N and 3kVAC between L/N-PE.</p><p>&nbsp;</p><p>Mounting is via front-side screw-on, with a maximum torque of 0.5 Nm. The fuseholder category is PC2 per IEC 60127-6. This product is RoHS3 and REACH unaffected compliant. Approval agencies include cULus and ENEC.</p>

<p>The Curtis Industries F1500CA03 is a single-phase RFI filter in a compact IEC 320-C14 connector form factor. It combines a male receptacle with built-in common and differential mode filtering, making it suitable for reducing electromagnetic interference in power supply inputs.</p><p>&nbsp;</p><p>Rated for 3A continuous current at 250VAC (50/60 Hz), this module features quick connect terminals on the load side (0.250" / 6.3mm tabs). It is designed for panel mounting with screw holes and fits a standard rectangular cutout of 30.50mm x 22.90mm.</p><p>&nbsp;</p><p>Key filtering performance includes minimum common mode insertion loss of 32 dB at 0.15 MHz up to 50 dB from 1 to 30 MHz, and differential mode loss of 35 dB at 0.15 MHz reaching 65 dB at 1 MHz. Leakage current is limited to 0.25 mA at 115VAC and 0.40 mA at 250VAC.</p><p>&nbsp;</p><p>The F1500CA03 carries approvals from CE, CSA, TUV, and UL, and is RoHS and REACH compliant. It does not accommodate a fuse. The unit operates in ambient temperatures up to 40°C and humidity from 0% to 95% RH.</p>

<p>The Schurter DD14-62121-12111-1100 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-stage EMI/RFI filter, a 2-pole on-off switch, and a fuse holder for 5x20mm fuses (fuse drawer sold separately). It is rated for 10A at 250VAC (IEC/UL) and features a shielded aluminum case for effective interference suppression.</p><p>&nbsp;</p><p>Key electrical specifications include a maximum leakage current of 0.5mA (standard) or 5µA (medical version), dielectric strength of 1.7kVDC between L-N and 2.7kVDC between L/N-PE, and an operating temperature range of -25°C to 85°C. The module is approved to cURus and ENEC standards and meets UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Mechanically, the module offers panel mount with flange (screw-on, max panel thickness 8mm) or snap-in mounting (1-3mm panel). Termination is via quick connect 0.250" (6.3mm) tabs. The V-Lock notch ensures secure cord retention. The design is ultra-compact, ideal for low-profile equipment requiring multiple functions in a single package.</p>

<p>The Schurter 4719.4300 is a panel mount IEC 320-2-2/F power entry module (PEM) with female sockets. It is rated for 10A at 250VAC and is unfiltered, suitable for commercial applications. The module features a neon indicator for power-on status and a shuttered contact protection mechanism. It includes an integrated fuse holder (fuse not included). The connector is mounted via snap-in into a rectangular panel cutout of 33.00mm x 37.00mm, with a maximum panel thickness of 1.50mm. Termination is through wire leads. The module has an IP40 protection rating and is constructed from materials with UL94 V-0 flammability rating. It carries cULus and VDE approvals. The component is RoHS3 compliant, REACH unaffected, and has a moisture sensitivity level of 1 (unlimited).</p>

<p>The 6163.0019 from Schurter Inc. is an unfiltered IEC 320-C20 power entry module designed for panel mount installation with flange fixing. It features solder eyelet terminals for secure connections. The module is rated at 16 A (IEC 50 Hz) and 20 A (UL/CSA 60 Hz) at 250 VAC, making it suitable for high-current applications.</p><p>&nbsp;</p><p>The connector has 3 positions and a rectangular panel cutout of 34.70 mm x 26.50 mm. It offers a dielectric strength greater than 3 kVAC between line and neutral, and greater than 1.5 kVAC between line/neutral and protective earth, ensuring reliable insulation. The operating temperature range is -25 °C to 70 °C, and the housing is made of thermoplastic with UL 94V-0 flame rating.</p><p>&nbsp;</p><p>The module is classified as protection class I and has an IP20 ingress protection rating for the front side. It is approved by CCC, cCSAus, ENEC, and UL. This power entry module does not accommodate a fuse.</p>