TE Connectivity

<p>The 5-825440-0 is a 100-position unshrouded male pin header from TE Connectivity. It features a 2.54mm pitch and 2 rows, designed for through-hole mounting with solder termination. The header is suitable for board-to-board or cable-to-board applications. The insulation is green PBT with UL94 V-0 flammability rating, and the contacts are tin-plated brass with a square shape. Contact finish thickness is 3.90µin. Operating temperature range is -65°C to 105°C. The push-pull fastening type enables easy mating and unmating.</p>

<p>This TE Connectivity SOLISTRAND ring tongue terminal (part number 2-33459-6) is designed for 10-12 AWG copper wire with a wire size range of 5180–13100 CMA. It features a stud size of 5/16 inch or M8, a tongue thickness of 0.79 mm, and an overall length of 25.5 mm. The terminal is non-insulated with a closed barrel, offset orientation, and a 180° terminal angle. It has a brazed seam and serrated termination for secure crimp connections. The contact is made of tin-plated copper. Packaging is tape mounted with 2500 pieces per package. Operating temperature range is 170 °C.</p>

<p>The TE Connectivity 794280-1 is a wire seal accessory for Universal MATE-N-LOK rectangular connectors. It features 12 positions with a 6.35 mm pitch and is made of silicone rubber in blue color. The seal accommodates wire sizes from 0.5 to 2 mm² and insulation diameters from 1.52 to 3.3 mm. It is designed for splash-proof applications and operates over a temperature range of -55 to 105 °C. The material is low halogen and compliant with EU RoHS, ELV, China RoHS, and REACH regulations. Packaging is in bags or boxes of 400 pieces.</p>

<p>The 1217094-1 is a quick disconnect terminal manufactured by TE Connectivity. It is a female, non-insulated terminal designed for 0.250" (6.35mm) tab width and accepts 14-18 AWG wire. The terminal is brass and uses a crimp termination method for secure wire attachment.</p><p>&nbsp;</p><p>This terminal is intended for free hanging (in-line) mounting applications. Its tab thickness is 0.032" (0.81mm) and tab length is 0.293" (7.44mm), with an overall length of 19.58mm (0.771"). The non-insulated design is suitable for applications where insulation is not required or where a secondary insulation method is used.</p><p>&nbsp;</p><p>Typical use cases include power distribution, control circuits, and general wiring applications where a reliable, quick-disconnect connection is needed.</p>

<p>The TE Connectivity 188753-4 is a DIN 41612 Type F backplane connector featuring a header with male pins. It offers a total of 96 positions arranged in 3 rows, with 31 positions loaded. The connector is designed for right angle through hole mounting and terminated via solder.</p><p>&nbsp;</p><p>This connector is part of the industry-standard DIN 41612 family, commonly used in backplane and rack-and-panel interconnection systems. The Type F designation specifies the contact arrangement and mating interface. The right angle orientation allows efficient board-to-board connections in space-constrained designs.</p><p>&nbsp;</p><p>The connector is Class 2 per DIN 41612, indicating controlled insertion/withdrawal forces suitable for reliable repeated mating cycles.</p>

<p>TE Connectivity 1410968-3 is a VITA 46 center plug connector designed for backplane and daughtercard applications. It features 112 positions with 105 positions loaded, arranged in 7 rows and 16 columns with a 1.80mm pitch. The connector uses press-fit termination for reliable solderless connections and has a gold contact finish with 50µin thickness for corrosion resistance and high mating cycles.</p><p>&nbsp;</p><p>The connector supports board edge, through hole, right angle mounting and includes a board guide feature for alignment during mating. The contact layout typical includes 20 signal pairs, 20 signal, 12 power, 38 ground, and 2 mechanical contacts, making it suitable for high-density signal and power distribution in rugged embedded computing environments.</p><p>&nbsp;</p><p>This connector is part of TE Connectivity's VITA 46 product line, compliant with the VITA 46 standard for high-performance backplane interconnects. It is black in color and designed for use in daughtercard configurations.</p>

<p>The TE Connectivity 320561 is a circular ring terminal designed for 14-16 AWG wire and a #6 stud size. It features a crimp termination with a serrated barrel for maximum electrical contact and tensile strength. The terminal is insulated with nylon (UL94V-2) and color-coded blue for easy identification of wire size. The contact is made of high conductivity copper with a tin plating per ASTM B-545 for corrosion protection.</p><p>&nbsp;</p><p>As part of the PIDG (Pre-Insulated Diamond Grip) terminal family, this component includes a copper sleeve that crimps to the wire insulation for added vibration resistance and wire support. The operating temperature range is 105°C and the maximum voltage rating is 300V. These terminals are commonly used in instruments, control panels, lighting, power supplies, transportation, and aerospace applications.</p><p>&nbsp;</p><p>The 320561 is a free-hanging, in-line mount terminal suitable for reliable connections in high-vibration environments. Most PIDG terminals are UL/CSA listed and Mil-Spec approved, meeting SAE AS7928 Type II Class 1 requirements.</p>

<p>The 640581-1 is a 6-position plug housing from TE Connectivity's Universal MATE-N-LOK series. This rectangular connector housing accepts male or female crimp contacts and features a latch lock fastening mechanism for secure mating. The housing is designed for free hanging (in-line) mounting and comes in a white color.</p><p>&nbsp;</p><p>With a single row configuration and 6 positions, this housing is suitable for wire-to-wire applications requiring reliable connections. The operating temperature range spans -55°C to 105°C, making it appropriate for a variety of environments.</p><p>&nbsp;</p><p>This part is RoHS3 compliant and REACH unaffected, with an MSL of Level 1 (unlimited). A material upgrade was implemented per PCN E-17-013712 for improved supply chain reliability.</p>

<p>The TE Connectivity 3-6318490-6 is a high-density receptacle connector designed for parallel board-to-board mezzanine configurations. It offers 220 positions arranged in 2 rows with a 0.5mm pitch, enabling compact and space-efficient designs. The connector features a surface mount termination method and gold-plated contacts with 8 microinches of plating thickness for reliable signal integrity.</p><p>&nbsp;</p><p>This connector supports mated stacking heights of 5mm and 8mm, making it suitable for various mezzanine spacing requirements. It is rated for 0.5A per contact and 50VAC, with a dielectric withstanding voltage of 200VAC. The housing is made of high temperature thermoplastic with UL 94V-0 flammability rating, ensuring robust performance in demanding environments.</p><p>&nbsp;</p><p>The 3-6318490-6 includes a board guide and ground plate for improved alignment and grounding. It is packaged in hard trays with a standard quantity of 210 pieces. The operating temperature range is -40°C to 80°C.</p>

<p>The TE Connectivity 1-215079-6 is a 16-position, 2-row female receptacle from the Micro-MaTch series. It features a 2.54mm pitch and 2.54mm row spacing, with a through-hole termination using kinked pins for secure solder connection. The contact length is 3.10mm and insulation height is 4.00mm. The housing is red PBT polyester with UL94 V-0 flammability rating. Contacts are phosphor bronze with tin finish. Operating temperature range is -40°C to 105°C. The connector is designed for board-to-board or cable applications. It is available in tape and reel packaging (2500 per reel) or box packaging (250 per box). Voltage rating is 100VDC. No current rating is specified in the available data.</p>

<p>The TE Connectivity 9-1393644-1 is a DIN 41612 Type C plug connector with 96 male pins arranged in 3 rows. All positions are loaded, providing a full 96-pin configuration. The connector features a 2.54mm (0.100") pitch and is designed for through-hole mounting with a right-angle orientation, making it suitable for perpendicular connection to a PCB. Solder termination ensures reliable electrical connections. The contact finish is gold or gold-palladium, offering good corrosion resistance and durability. This connector is wave solder capable to 240°C. It is compliant with RoHS, REACH, ELV, and China RoHS directives, but is not low halogen. DIN 41612 connectors are widely used in backplane and rack-and-panel applications, providing a standardized interface for high-density signal connections. The Type C style defines a 3-row, 96-position configuration. The right-angle mounting allows for compact PCB layouts where space is limited.</p>

<p>The TE Connectivity 3-822516-3 is a 20-position PLCC socket designed for surface mount applications. It features a 1.27mm (0.050") pitch and a closed frame thermoplastic housing that provides mechanical protection and reliable alignment for PLCC IC packages.</p><p>&nbsp;</p><p>The contacts are made of phosphor bronze with a tin finish of 100µin (2.54µm), ensuring good conductivity and solderability. The socket uses surface mount solder termination, making it suitable for automated assembly processes. The housing material is thermoplastic, offering durability and thermal stability.</p><p>&nbsp;</p><p>This socket is intended for use with 20-pin PLCC devices in a 4x5 grid arrangement. It is commonly used in programming, testing, and production environments where a reliable, removable connection is required. The closed frame design helps prevent damage to the IC during insertion and extraction.</p>

<p>The TE Connectivity 34892 is a non-insulated circular ring terminal designed for reliable wire termination in electrical and electronic applications. It accommodates 10-12 AWG wire and fits a #6 stud size, making it suitable for a variety of power and signal connections.</p><p>&nbsp;</p><p>The terminal features a tin-plated copper contact material for good conductivity and corrosion resistance. It uses a crimp termination style for secure, permanent connections and is designed for free hanging (in-line) mounting. The serrated termination feature enhances grip on the wire for improved mechanical and electrical integrity.</p><p>&nbsp;</p><p>With a thickness of 0.99 mm, width of 7.14 mm, and length of 16.00 mm, this compact ring terminal is suitable for use in confined spaces. Its non-insulated design is ideal for applications where insulation is not required or where additional heat shrink tubing is applied.</p>

<p>The TE Connectivity 5145300-2 is a smart card connector designed for push-in/pull-out card insertion. It has 10 positions arranged as 8 signal plus 2 additional, and is mounted via surface mount technology with a right angle orientation.</p><p>&nbsp;</p><p>Gold contact finish with 0.76 µm thickness ensures reliable connectivity. The connector includes a board guide for alignment and an integrated switch. The mounting feature is standard top. Height above board is 3.66 mm.</p><p>&nbsp;</p><p>The component is supplied in tray packaging with dimensions 333.5 mm x 288.8 mm. It is claimed RoHS3 and REACH compliant, and MSL Level 1 (unlimited). Note: compliance data is unverified. The datasheet is preliminary and not released for production.</p><p>&nbsp;</p><p>This connector is suitable for use in smart card readers and similar applications requiring a compact, surface mount interface. The push-pull mechanism allows easy card insertion and removal.</p>

<p>The TE Connectivity 2061973-4 is a FullAXS Mini coupler designed for use with panel mount frames. This accessory is part of the FullAXS Mini series, which offers a compact 29.2 mm bulkhead footprint and a 29.9 mm plug diameter. The coupler provides a sealed IP67 rated connection, making it suitable for outdoor and harsh environment applications.</p><p>&nbsp;</p><p>Mechanically, the coupler features a 30° bayonet twist angle for secure mating and has a length to panel of 80 mm without boot. It is available in both shielded and unshielded variants and supports single-mode and multi-mode fiber types. The optical interface options include simplex and duplex LC, simplex SC, and MPO connectors.</p><p>&nbsp;</p><p>The coupler is black in color and includes a cable gland and seal as part of its specifications. It is designed for field installation, as indicated by the introtext "FULLPROOF140 MINI FIELD INSTALL". This component is commonly used in 5G antenna and edge computing applications where ruggedized fiber connectivity is required.</p>

<p>This TE Connectivity Z-PACK HS3 series backplane receptacle offers 30 positions arranged in 6 rows and 5 columns. The connector features a dual beam center contact design for reliable connections in high-density backplane applications. It uses press-fit termination for through-hole mounting at a right angle, eliminating the need for soldering. The housing is made of liquid crystal polymer (LCP) with UL94V-0 flammability rating. Contacts are copper alloy with gold finish (30.0µin) for low resistance and corrosion resistance. The shield is phosphor bronze. With a 2.50mm pitch, this connector supports compact PCB layouts.</p><p>&nbsp;</p><p>Designed for backplane interconnections, this receptacle is suitable for telecommunications, data networking, and industrial control systems. The dual beam contacts provide multiple points of contact for enhanced signal integrity. The press-fit termination ensures a reliable mechanical and electrical connection without thermal stress.</p><p>&nbsp;</p><p>For design considerations, refer to TE Connectivity application specification 114-13020 for recommended plated through hole diameter and plating thickness. The contact mating area meets performance requirements of TE product specification 108-1957 based on Telcordia GR-1217-CORE.</p>

<p>This 8-position rectangular connector housing from TE Connectivity is designed for use with Junior Timer contacts. It is a plug housing with 2 rows and a pitch of 5.08 mm, accommodating crimp termination.</p><p>&nbsp;</p><p>The housing is made of polyamide 66 (PA66) in red color and is intended for free hanging (in-line) mounting. Typical applications include automotive and industrial wiring systems where reliable connections are required.</p>

<p>The TE Connectivity 5406299-1 (internal number 1-5406299-1) is a single-port RJ45 modular jack with 8 positions (8P8C) in a 1x1 configuration. It is mounted via through hole technology with a right angle (side entry) orientation, making it suitable for edge-mounted PCB applications where space is limited.</p><p>&nbsp;</p><p>The connector is fully shielded with a copper alloy shield plated with tin, and includes an EMI finger for enhanced electromagnetic interference protection. Grounding options include both panel ground and PCB ground via two PCB ground tabs. The housing is made of high temperature nylon with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical performance meets Cat5e standards. The contact mating area is gold plated (50µin) over phosphor bronze, while solder tails are tin over nickel. This jack does not include an LED. The recommended PCB thickness is 1.57 mm.</p>

<p>The TE Connectivity 926477-1 is a retention clip designed for use with AMPMODU Mod II and IV series rectangular connectors. This accessory provides secure retention of connector components in demanding applications. The clip is RoHS3 compliant and has an MSL of 1 (unlimited). It is a mechanical accessory that ensures reliable mating and prevents accidental disconnection.</p>

<p>The TE Connectivity 1410190-3 is a specialized backplane connector designed for VITA 46 (VPX) systems. It is a plug connector with male blade contacts arranged in a 7-row by 16-column grid, providing 112 total positions. The contact layout is configured as 80 single signal contacts and 32 ground contacts, supporting high-speed differential signaling and robust grounding.</p><p>&nbsp;</p><p>This connector uses a 1.80mm pitch and features a right-angle orientation for board edge mounting. Termination is through-hole solder, ensuring reliable mechanical and electrical connections. The contacts are finished with 50 microinches of gold over the mating area, providing excellent corrosion resistance and durability.</p><p>&nbsp;</p><p>The housing is black and designed for daughtercard applications. The connector is rated with an MSL of 1 (unlimited floor life) and is claimed RoHS3 and REACH compliant. It is suitable for use in rugged embedded computing, defense, aerospace, and industrial applications requiring high-density, high-reliability interconnects.</p>

<p>The TE Connectivity 2301826-2 is a D-Sub, D-shaped connector assembly designed for reliable signal connectivity. This plug connector features 9 male pin contacts arranged in 2 rows, suitable for standard DE-9 (E) shell size applications.</p><p>&nbsp;</p><p>The connector uses through hole mounting with solder termination for robust mechanical attachment to printed circuit boards. Contacts are finished with 15.0 µin (0.38 µm) gold plating for corrosion resistance and reliable signal transmission. The shell is constructed from steel with a tin-nickel plated finish.</p><p>&nbsp;</p><p>Key design features include a mating side female screwlock (4-40) flange for secure mating, integrated board locks for additional PCB retention, and grounding indents for improved electromagnetic compatibility. The insulator material has a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This connector is rated for a maximum current of 1.5 A per contact for signal applications. It is RoHS3 compliant and REACH unaffected per low-confidence data.</p>

<p>The TE Connectivity 130102 is a circular ring terminal designed for wire sizes 14 to 16 AWG. It features an insulated barrel with blue color coding and a crimp termination for reliable wire connections. The contact is made of copper with a tin plating, ensuring good conductivity and corrosion resistance. The terminal includes a serrated inner barrel that enhances wire grip and pull-out strength. The free hanging (in-line) mounting style allows for easy installation in various applications. Dimensions are 22.30 mm in length, 8.71 mm in width, and 0.81 mm in thickness. This part is RoHS3 compliant, REACH unaffected, and has an MSL rating of 1 (unlimited). Suitable for use in electrical panels, automotive wiring, and industrial equipment where secure ring terminal connections are required.</p>

<p>The DR-25-1/2-0-SP is a flexible heat shrink tubing manufactured by TE Connectivity. It features an inner diameter of 0.250" (6.35mm) and a recovered wall thickness of 0.048" (1.22mm). The tubing is made from an irradiated elastomer material, providing a 2:1 shrink ratio when heated to a shrink temperature of 150°C. It is rated for continuous operation from -75°C to 150°C.</p><p>&nbsp;</p><p>This tubing offers a combination of resistance properties: abrasion, chemical, heat, fluid, flame, fuel, and oil resistant. Its black color is standard for many protective applications. The flexible nature allows it to conform to irregular shapes during installation.</p><p>&nbsp;</p><p>The tubing is supplied in continuous lengths by the foot, allowing buyers to order the exact length needed. It is designed for use in environments where wires and cables require mechanical protection, insulation, strain relief, and environmental sealing. Typical applications include harnessing, bundling, and protection in automotive, industrial, and aerospace systems.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and REACH unaffected, with an MSL of Level 1 unlimited. No datasheet or detailed electrical specifications were available; physical and mechanical properties are confirmed from the product attributes.</p>

<p>The TE Connectivity 53405-1 is a circular ring terminal designed for wire termination applications. It accepts 16-22 AWG wire and features a #4 stud size. The terminal uses a crimp termination method and is insulated to prevent short circuits. The contact is made of copper with a tin-lead finish, providing reliable conductivity and corrosion resistance. The terminal has a thickness of 0.79mm, width of 5.54mm, and length of 17.07mm. It is radiation resistant, making it suitable for harsh environments. The insulation is natural with a red stripe for easy identification. This terminal is free hanging (in-line) and requires a compatible crimp tool for installation.</p>

<p>The TE Connectivity 1-353081-2 is a rectangular connector header designed for board-to-cable/wire applications. It features 3 positions in a single row with a 10.16mm pitch, making it suitable for high-power connections. The header is shrouded with a 4-wall design and includes a detent lock for secure mating. Contacts are made of copper alloy with a tin finish (15.0µin) and are rectangular tabs. The insulation is black thermoplastic, polyester, glass filled with a UL94 V-0 flammability rating. Mounting is through hole, right angle, with solder termination and a board lock feature for additional retention. The operating temperature range is -55°C to 105°C, and the ingress protection rating is IP20.</p>

<p>The TE Connectivity 1888250-1 is a modular connector jack designed for Ethernet and networking applications. It features an 8p8c (RJ45) configuration with 1 port and 1 row of contacts. The connector is shielded with an EMI finger to reduce electromagnetic interference, ensuring signal integrity in high-speed data environments. The right angle (90°) orientation allows for space-saving board edge or panel mount installations. Termination is via press-fit, providing a reliable solderless connection. Contact material is phosphor bronze with gold plating for corrosion resistance and reliable electrical performance. The jack includes green and yellow LED indicators for link/activity status. It is rated for Cat5e performance, supporting frequencies up to 100 MHz. The tab direction is up. The component is RoHS3 compliant, MSL 1 (unlimited), and REACH unaffected, though these compliance values are unverified. A cross-reference part number is DigiKey A98526-ND.</p>

<p>The TE Connectivity 1-770872-1 is a rectangular connector header designed for board-to-cable/wire applications. It has 2 male pin contacts arranged in a single row with a 4.14mm pitch. The connector is through-hole mounted and terminated via solder.</p><p>&nbsp;</p><p>Mechanically, the header is fully shrouded with four walls and includes a locking ramp for secure mating. A board lock feature provides additional mechanical retention to the PCB. The insulation housing is white polyamide (nylon) with a UL94 V-0 flammability rating, and the insulation height is 13.50mm.</p><p>&nbsp;</p><p>Electrically, it is rated for 600VAC, with the current rating dependent on the connected wire gauge. The operating temperature range is -20°C to 105°C. Contacts are made of brass with a tin plating of 30.0µin (0.76µm), ensuring reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This header is suitable for a variety of industrial and commercial applications requiring a reliable, durable connection between a PCB and wire harness. The shrouded design protects contacts and aids in alignment during mating.</p>

<p>The TE Connectivity 1-87631-2 is a rectangular connector housing designed for use with female socket contacts. It features 16 positions arranged in 2 rows with a 2.54mm pitch and row spacing. The housing uses a detent lock fastening system and is intended for free hanging (in-line) mounting. Contacts are terminated via crimp. The housing is black and operates over a temperature range of -65°C to 105°C.</p>

<p>The TE Connectivity 826632-3 is an AMPMODU II breakaway pin header designed for board-to-board or cable-to-board interconnections. It features 6 male pin contacts arranged in 2 rows with a standard 2.54mm pitch and row spacing. The unshrouded, push-pull fastening design allows easy mating and unmating.</p><p>&nbsp;</p><p>This header is rated for 5A current and operates over a temperature range of -65°C to 105°C. The insulator is molded from green polybutylene terephthalate (PBT) with a UL94 V-0 flammability rating. Contacts are made of brass with a tin finish (0.099µm thickness) and have a square pin shape.</p><p>&nbsp;</p><p>The through-hole mounting with solder termination provides a reliable mechanical and electrical connection to the PCB. The overall contact length is 12.70mm, with a mating pin length of 6.70mm and an insulation height of 2.79mm.</p>

<p>The TE Connectivity 1-826629-0 is a 10-position, single-row, unshrouded header connector with a 2.54mm pitch. It features male square pins made of brass with a tin finish, providing reliable conductivity and solderability. The insulation is made of green Polybutylene Terephthalate (PBT) with a UL94 V-0 flammability rating, ensuring safety in various applications.</p><p>&nbsp;</p><p>The header has a mating contact length of 6.70mm and an overall contact length of 12.70mm, with an insulation height of 2.79mm. It is designed for through-hole mounting with solder termination, making it suitable for permanent PCB attachment. The push-pull fastening type allows easy mating and unmating.</p><p>&nbsp;</p><p>This connector is rated for 5A current and operates over a temperature range of -65°C to 105°C. It is suitable for board-to-board or cable connections, commonly used in industrial control, consumer electronics, and prototyping applications.</p>