Schurter Inc.

<p>The Schurter 3410.0029.01 is a board mount fuse rated for 750mA continuous current at 125VAC and 125VDC. It features a fast blow (super-quick-acting FF) response characteristic, providing rapid protection against overcurrent conditions. The breaking capacity is 50A AC and 300A DC, suitable for demanding applications.</p><p>&nbsp;</p><p>The fuse is housed in a ceramic 2-SMD, square end block package with tin-plated nickel terminals, designed for surface mounting. The operating temperature range spans -55°C to 150°C, supporting high-reliability environments. It carries cURus approval per UL 248-14 and is classified as MSL 1 (unlimited).</p><p>&nbsp;</p><p>This fuse is intended for use in medical equipment, offshore installations, defense systems, and intrinsically safe applications where hermetic sealing and robustness are required. The compact size (3.2mm x 1.55mm x 1.55mm) enables space-constrained PCB designs.</p>

<p>The Schurter 0031.1095 is a shock-safe fuseholder from the FEF series, designed to accept 5x20mm cartridge fuses. It is rated for 10A at 250VAC and features a panel mount with snap-in attachment for panel thicknesses from 0.75mm to 3.0mm. The solder lug termination ensures reliable connections in fixed installations.</p><p>&nbsp;</p><p>This fuseholder offers an IP40 degree of protection and operates over a temperature range of -40°C to 85°C. The thermoplastic body and cap are rated UL 94V-0 for flammability, and the copper alloy terminals are tin-plated for corrosion resistance. Electrical characteristics include a dielectric strength greater than 3 kV, insulation resistance of at least 10 MΩ, and contact resistance of 10 mΩ or less.</p><p>&nbsp;</p><p>The FEF series is designed for shock-safe operation (PC2 category) and is suitable for overvoltage category III environments with pollution degree 2. The snap-in mounting allows quick installation into panels from 0.75mm to 3.0mm thickness.</p>

<p>The Schurter 5220.0623.3 is a power entry module that combines an IEC 320-C14 appliance inlet with an EMI/RFI line filter and a 2-pole fuseholder for 5x20mm fuses. It features a compact design with a stainless steel filter case and potted filter for high reliability. The module is rated for 6A at 250VAC and offers both standard (&lt;0.5 mA) and medical (&lt;5 µA) leakage current options. Electrical isolation meets 1.7 kVDC between line and neutral and 2.7 kVDC between line/neutral and ground.</p><p>&nbsp;</p><p>The module supports panel mounting with either screw-on (max panel thickness 8 mm) or snap-in (0.8 to 3 mm) methods. Terminations are quick connect 0.250 inch (6.3 mm) tabs. The front side is rated IP40 for splash protection. The thermoplastic housing is UL 94V-0 rated for flammability. It is approved by cULus and ENEC for international use.</p><p>&nbsp;</p><p>This power entry module is suitable for applications requiring filtered AC power entry with fuse protection, including medical equipment (per IEC/UL 60601-1), commercial electronics, and industrial controls. The operating temperature range is -25°C to 85°C with a MTBF of 2,300,000 hours.</p>

<p>The Schurter 0031.2203 is a shock-safe fuseholder designed for 5x20mm cartridge fuses. It features a panel mount front-side installation with a fixing nut and offers solder lug or quick-connect 6.3x0.8mm terminals. The holder is rated for 250VAC (VDE) and 600VAC/DC (UL/CSA) with a current rating of 16A (VDE) or 30A (UL/CSA).</p><p>&nbsp;</p><p>This fuseholder accepts up to 4W of power dissipation at 23°C ambient temperature and provides IP40 protection (IP67 with optional accessory). It is suitable for protection class I appliances per IEC 61140 and operates over an ambient temperature range of -40°C to 85°C. The socket is made of thermoplastic with UL 94V-0 flammability rating, and terminals are tin-plated copper.</p><p>&nbsp;</p><p>Designed for circuit protection applications, the 0031.2203 accommodates panel thicknesses up to 8mm and requires a maximum fixing nut torque of 1.2 Nm. It meets overvoltage category III and pollution degree 3 per IEC 60664-1.</p>

<p>The Schurter 5200.0243.1 is a compact power entry module from the 5200 series, combining an IEC 320-C14 appliance inlet, a 1-pole fuseholder for 5x20mm fuses, and an EMI/RFI line filter in a single unit. It is rated for 2A at 250VAC (40°C) and features a commercial-grade filter with leakage current below 0.5mA at 250VAC/60Hz.</p><p>&nbsp;</p><p>This module is designed for panel mount snap-in installation and accepts panel thicknesses from 0.79mm to 3.00mm. Termination is via quick connect terminals sized 6.3mm x 0.8mm. The front side is rated IP40 for protection against solid objects larger than 1mm. The housing is made of black thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The module includes a V-Lock notch for secure cord retention and is suitable for Class I equipment per IEC 61140. It operates over a temperature range of -25°C to 85°C and has a high MTBF of over 2,300,000 hours. The filter is potted for high resistance and uses a stainless steel case.</p>

<p>The Schurter 4787.1000 is a panel mount IEC appliance outlet conforming to the IEC 320-2-2/F standard. It accepts a 3-position female socket configuration and is designed for screw-on mounting from the front side of a panel with thickness up to 3 mm.</p><p>&nbsp;</p><p>Electrical ratings are 15 A at 250 VAC under UL/CSA and 10 A at 250 VAC under IEC with a dielectric strength greater than 2 kVAC between L-N and between L/N-PE. The operating temperature range is -25°C to 70°C.</p><p>&nbsp;</p><p>The connector offers solder terminals and a mounting screw torque of max 0.5 Nm. It is rated IP30 for front side protection and is suitable for Protection Class I applications. Housing material is black thermoplastic with a UL94 V-0 flammability rating. This part is unfiltered (commercial grade) and does not accommodate a fuse.</p>

<p>The Schurter DD12.8121.111 is a compact power entry module combining an IEC 320-C14 inlet, 2-pole line switch, 1- or 2-pole fuseholder for 5x20mm fuses, and an EMI/RFI filter in a single panel-mount package. It is rated for 8A at 250VAC (IEC/UL) and features quick connect terminals (0.250" / 6.3mm). The module includes a V-Lock notch for cord retention, an earth line choke, and a shielded aluminum case for enhanced EMI suppression.</p><p>&nbsp;</p><p>Electrical specifications include a leakage current of &lt;0.5 mA (standard) or &lt;5 µA (medical version), dielectric strength of 1.7 kVDC (L-N) and 2.7 kVDC (L/N-PE), and an operating temperature range of -25°C to 85°C. The module is rated IP40 and has a flammability rating of UL94 V-0. It is approved by cURus and ENEC, and complies with RoHS and REACH.</p><p>&nbsp;</p><p>The DD12 series is designed for screw-on front panel mounting with a rectangular cutout of 29.80mm x 49.30mm and accepts panel thickness up to 8.00mm. The fuseholder is sold separately. This module is suitable for use in medical equipment (medical version available) and applications requiring high transient loads.</p>

<p>The Schurter DD12.6111.111 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-pole line switch, a fuseholder for 5x20 mm fuses (fuse and drawer sold separately), and an EMI/RFI line filter in a single assembly. This module is rated for 6A current and 250VAC voltage, with a maximum leakage current of 0.5 mA (standard version).</p><p>&nbsp;</p><p>Designed for panel mount installation with screw-on mounting from the front side, the unit uses quick connect terminals of 0.250" (6.3mm). It features a V-Lock notch for cord retention and an aluminum case providing good shielding. The DD12 series is known for its ultra-compact design suitable for low profile applications.</p><p>&nbsp;</p><p>The module operates over a temperature range of -25°C to 85°C and carries an IP40 protection rating. It is approved by cURus and ENEC agencies. The material flammability rating is UL94 V-0. Electrical characteristics include a dielectric strength of 1.7 kVDC between L-N and 2.7 kVDC between L/N-PE. The climatic category per IEC 60068-1 is 25/085/21.</p>

<p>The Schurter DD12.8111.111 is a power entry module combining an IEC 320-C14 inlet, EMI/RFI filter, 2-pole line switch, and fuse holder for 5x20mm fuses (fuse drawer sold separately). It is designed for panel mount with screw-on mounting from the front side.</p><p>&nbsp;</p><p>Rated at 8A and 250VAC, it features a standard leakage current of less than 0.5mA at 250V/60Hz. Dielectric strength is 1.7kVDC between L-N and 2.7kVDC between L/N-PE. Operating temperature range is -25°C to 85°C with a climatic category of 25/085/21.</p><p>&nbsp;</p><p>The module uses quick connect terminals (0.250"/6.3mm) and has a rectangular panel cutout of 29.80mm x 49.30mm with a maximum panel thickness of 8.00mm. It is IP40 rated, has a UL94 V-0 flammability rating, and is approved by cURus and ENEC. Protection class I.</p><p>&nbsp;</p><p>Features include an earth line choke, shielded case, and V-Lock notch for cord retention. The switch is a 2-pole on-off type. With an MTBF of 2,000,000 hours, it is suitable for applications requiring reliable power entry with filtering and switching in a compact, low-profile design.</p>

<p>The Schurter DD12.2111.111 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-pole line switch, a fuseholder for 5x20mm fuses, and an EMI/RFI line filter in a single panel-mount package. It is rated for 2A at 250VAC and features a leakage current of less than 0.5 mA at 250V/60Hz. The module includes a V-Lock notch for cord retention and an earth line choke for enhanced filtering.</p><p>&nbsp;</p><p>The module is designed for screw-on panel mounting from the front side, with a rectangular cutout of 29.80mm x 49.30mm and a maximum panel thickness of 0.315 inches (8.00mm). Termination is via quick connect tabs (0.250" / 6.3mm). The housing is shielded and carries a UL94 V-0 flammability rating. The operating temperature range is -25°C to 85°C, with an IP40 protection rating.</p><p>&nbsp;</p><p>This component is suitable for applications requiring a filtered power entry solution with integrated switching and fuse protection. It is approved to cURus and ENEC standards and is RoHS3 and REACH compliant. The fuseholder drawer is sold separately.</p>

<p>The Schurter 4301.5001 is a KFA series power entry module combining an IEC 320-C14 inlet, EMI/RFI line filter, and fuseholder accommodation in a single panel-mount package. Rated for 1A at 250VAC, it provides filtered power entry for commercial equipment requiring conducted emission suppression.</p><p>&nbsp;</p><p>The module includes a commercial-grade filter with 100 nF capacitance, leakage current below 0.5 mA (standard version), and dielectric strength exceeding 1.7 kVDC between line-neutral and 2.7 kVDC between line/neutral and ground. It is designed for panel mounting with a flange and uses quick connect terminals (0.250" / 6.3mm). The housing is black thermoplastic with UL94 V-0 flammability rating and IP40 ingress protection.</p><p>&nbsp;</p><p>This component supports a fuse drawer (sold separately) for 5x20mm fuses, 1- or 2-pole. It is approved by CCC, cULus, and ENEC, and operates over -25°C to 85°C. The V-Lock notch ensures secure cord retention.</p>

<p>This is a panel mount fuseholder from Schurter, designed for 6.3x32mm cartridge fuses. It has a maximum current rating of 16A at 250VAC and can dissipate up to 3.6W power acceptance at 23°C ambient. The holder features IP68 protection from the front side, making it suitable for environments where dust and moisture ingress must be prevented. It is mounted using a fixing nut with a maximum torque of 1.2Nm and can accommodate panel thickness up to 5mm. The termination style is solder lug. The mounting is front-side panel mount. The operating temperature range is -40°C to 125°C, and the climatic category is 40/125/56 per IEC 60068-1. The fuseholder is suitable for use in industrial, automotive, and harsh environment applications. The holder is made of thermoset material (black) and weighs 38g (socket/cap). Packaging is bulk of 10 pieces.</p>

<p>The Schurter 0031.1631 is a panel mount fuseholder designed for 500VAC applications, suitable for equipment with three-phase supply up to 400VAC. It accepts both 5x20mm and 6.3x32mm fuse-links, offering flexibility for various fuse sizes. The holder is rated at 500VAC (VDE) for 10A and 600VAC/DC (UL/CSA) for 20A, with power acceptance of 4W (6.3x32mm) or 3.2W (5x20mm) at 23°C ambient.</p><p>&nbsp;</p><p>This fuseholder features a shock-safe category PC2 per IEC 60127-6, an IP40 degree of protection, and is suitable for protection class I equipment. It mounts on the panel front side using a fixing nut, and the terminals are solder lug with optional quick-connect 6.3x0.8mm. The housing is made of thermoplastic, with tin-plated copper alloy contacts. Operating temperature range is -40°C to 85°C, with storage conditions of 0°C to 60°C and max 70% relative humidity.</p><p>&nbsp;</p><p>Electrical characteristics include contact resistance ≤10mΩ at 100mA, dielectric strength &gt;3kV (50Hz for 1 minute), and impulse withstand voltage &gt;4kV. The holder is rated for overvoltage category II and pollution degree 2 per IEC 60664-1. Climatic category is 40/085/21 per IEC 60068-1.</p>

<p>The Schurter 4435.0393 is a 2-pole thermal circuit breaker from the TA35 series, designed for equipment protection. It is rated at 500 mA with a voltage rating of 240 VAC (IEC) / 277 VAC (UL/CSA) and 60 VDC. The breaker features a blue illuminated rocker actuator and is panel mounted via snap-in.</p><p>&nbsp;</p><p>Key electrical characteristics include a dielectric strength greater than 2.5 kV, insulation resistance above 100 MΩ, and a conditional short-circuit capacity of 2 kA at 240 VAC per IEC 60934. The device offers a mechanical lifetime of 50,000 switching cycles and an electrical lifetime of 50,000 cycles under both AC and DC conditions.</p><p>&nbsp;</p><p>The circuit breaker operates over a temperature range of -30 °C to 60 °C and can be stored between -40 °C and 60 °C. It provides IP40 protection on the front side, with an optional cover for IP65. The unit weighs 32 g and is suitable for use in power tools, medical equipment, industrial appliances, and commercial kitchen appliances.</p>