Schurter Inc.

<p>The Schurter Inc. 6600.3300 is a standard IEC 320-2-2/F power entry receptacle designed for panel mounting. It accepts a 3-position female socket configuration and is terminated with 0.250 inch (6.3mm) quick connect terminals. This unfiltered commercial-grade receptacle is rated for 10A at 250VAC and is compliant with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The housing is constructed from thermoplastic polyamide 6.6, and contacts are brass with tin plating. The unit requires a rectangular panel cutout of 32.50mm x 24.80mm and is secured via a flange mount. It offers IP30 ingress protection, suitable for indoor commercial equipment.</p><p>&nbsp;</p><p>This component is part of the Schurter 6600 series and carries approvals from CCC, cULus, and ENEC. It does not accommodate a fuse. The quick connect termination simplifies wiring in power supply and distribution applications.</p>

<p>The Schurter Inc. 0001.2513 is a 5x20mm ceramic cartridge fuse with a time-lag T (slow blow) characteristic. It is rated for 8A continuous current at 250VAC and 300VDC. The fuse has a breaking capacity of 1kA AC and 1.5kA DC (per existing data; datasheet indicates a range of 500A to 1500A). It is designed for primary protection in equipment such as power supply adapters and SMPS. The ceramic tube with nickel-plated copper alloy endcaps ensures durability. Operating temperature range is -55°C to 125°C. The fuse requires a holder for mounting and is approved by cURus and VDE.</p>

<p>The Schurter Inc. 0031.1353 is a single-circuit cartridge fuseholder designed for panel mounting. It is rated for 10A continuous current at 250V AC/DC, making it suitable for a variety of overcurrent protection applications. The holder accepts standard 5mm x 20mm cartridge fuses.</p><p>&nbsp;</p><p>Termination is via solder lugs, providing a reliable connection for wire or PCB mounting. The contact material is copper alloy with a tin finish, ensuring good conductivity and corrosion resistance. The panel mount design allows for easy installation and replacement of fuses from the front of the panel.</p><p>&nbsp;</p><p>This fuseholder is commonly used in industrial equipment, power supplies, and consumer electronics where space-efficient overcurrent protection is required. The single-circuit configuration is ideal for protecting individual loads or branch circuits.</p>

<p>The Schurter 4301.5012 is a filtered power entry module (PEM) combining an IEC 320-C14 appliance inlet, EMI/RFI line filter, and a fuseholder for 5x20mm fuse-links (1- or 2-pole, fuse drawer sold separately). Rated for 2A at 250VAC, it is designed for panel mount installation with a rectangular cutout of 29.00mm x 33.00mm. The module uses quick connect terminals (0.250" / 6.3mm tabs) and offers protection class I with IP40 ingress protection.</p><p>&nbsp;</p><p>The integrated line filter provides standard leakage current below 0.5 mA and medical-grade leakage below 5 µA. Dielectric strength exceeds 1.7 kVDC (L-N) and 2.7 kVDC (L/N-PE). Operating temperature range is -25°C to 85°C. The housing material meets UL94 V-0 flammability rating. Approvals include CCC, cULus, and ENEC.</p>

<p>The Schurter 5120.1306.0 is a compact IEC 320-C14 appliance inlet with an integrated EMC filter. It is designed for panel mounting with a flange and offers quick connect (0.250") termination. The module is rated for 10A at 250VAC (IEC) and 15A at 250VAC (UL/CSA). It features a shielded metal case for optimal EMI/RFI suppression, making it suitable for both commercial and medical equipment. The filter meets standard and medical leakage current requirements: &lt;0.5mA standard and &lt;5µA medical at 250V/60Hz. Dielectric strength is &gt;1.7kVDC between L-N and &gt;2.7kVDC between L/N-PE. The operating temperature range is -25°C to 85°C, with IP40 protection on the front side. The part is approved by CCC, cULus, and ENEC, with flammability rating UL94 V-0. It accommodates protection class I or II and has a typical MTBF of 3,000,000 hours per MIL-HDBK-217F.</p>

<p>The Schurter 3403.0170.11 is a surface mount slow blow fuse from the UMT 250 series, designed for overcurrent protection in compact SMD applications. Rated at 2.5A, it operates at 250 VAC and 250 VDC, offering a high breaking capacity of 200 A at 250 VAC (IEC) and 35 A at 250 VDC.</p><p>&nbsp;</p><p>The time-lag (slow blow) characteristic allows the fuse to withstand brief inrush currents while providing reliable protection against sustained overloads. The ceramic housing with tin-plated copper terminals ensures durability and excellent solderability.</p><p>&nbsp;</p><p>This fuse is approved by multiple agencies including CQC, cURus, KC, PSE/JET, UL, and VDE, making it suitable for international applications. It is recommended for primary protection on SMD PCBs, medical equipment, and battery protection circuits. The package is 2-SMD, Square End Block, with dimensions 10.10mm x 3.00mm x 3.00mm. Operating temperature ranges from -55°C to 125°C, and it is MSL 1 (unlimited).</p>

<p>The Schurter Inc. 0034.1107 is a cartridge fuse designed for overcurrent protection in high-voltage applications. It is rated for 25A continuous current at 500VAC, with a breaking capacity of 50kA, ensuring safe interruption of fault currents up to that level. The fuse features a fast blow response time, making it suitable for protecting sensitive components that require rapid clearing of overcurrents.</p><p>&nbsp;</p><p>This fuse is classified as Class D, which defines its time-current characteristics and interrupting rating. It is housed in a GLD II package, requiring a separate holder for mounting. The package is designed for reliable performance in industrial and specialty electrical systems.</p><p>&nbsp;</p><p>Typical applications include motor control centers, distribution panels, and other equipment where high fault current capability is necessary. The fast blow characteristic ensures minimal let-through energy, reducing stress on downstream components.</p>

<p>The Schurter 4301.0501 is a KEA series IEC 320-C14 appliance inlet with an integrated fuseholder for 5x20mm fuses. It combines three functions: appliance inlet, fuseholder (1- or 2-pole), and optional voltage selector. The module is designed for panel mount with screw-on or snap-in mounting options. It features quick connect terminals (4.8x0.8mm) and a V-Lock notch for cord retention. Electrical ratings are 10A at 250VAC (IEC and UL/CSA). Dielectric strength exceeds 3kVAC between L-N and 4kVAC between L/N-PE. The housing is made of thermoplastic with UL94 V-0 flammability rating. Operating temperature range is -25°C to 70°C. The module meets IP40 protection on the front side and is suitable for protection class I equipment. It complies with IEC 60335-1 for unattended appliances and is approved by CCC, CSA, ENEC, and UL. This unfiltered module is ideal for applications requiring a compact power entry solution with integrated fuse protection.</p>

<p>This is an unfiltered commercial-grade IEC 320-C13 plug. It features a female socket with 3 positions. The termination type is screw, and it is designed for free hanging (in-line) mounting. It has a current rating of 10A and voltage rating of 250VAC. The connector is approved by CCC, cULus, and VDE. The material has a flammability rating of UL94 V-0. It does not accommodate a fuse. This plug is suitable for power entry applications requiring a standard C13 connection.</p>

<p>The Schurter 7010.6360.13 is a subminiature fuse designed for board-level overcurrent protection. This quick-acting (fast-blow) fuse offers reliable circuit interruption with a rated current of 1A and voltage rating of 125VAC and 125VDC.</p><p>&nbsp;</p><p>Electrical specifications include a breaking capacity of 300A at rated voltage and a melting I²t value of 0.39 A²s. The fast-blow response ensures rapid disconnection during overcurrent events, suitable for protecting sensitive components.</p><p>&nbsp;</p><p>Mechanically, the fuse features a ceramic tube with tin-plated copper axial leads for through-hole soldering. Package size is 2.36mm x 8.00mm (0.093" x 0.315"). Operating temperature range is -55°C to 85°C, with storage conditions of 0°C to 60°C and max 70% relative humidity.</p><p>&nbsp;</p><p>The fuse carries CE and UKCA declarations of conformity. RoHS, REACH, and MSL status are unverified; please verify compliance with the manufacturer for specific requirements.</p>

<p>The Schurter 4302.0104 is a power entry module from the KEB I series, combining an IEC 320-C14 appliance inlet with a 1-pole illuminated rocker switch. It is rated for 10A at 250VAC and designed for snap-in panel mounting on panels up to 2.5mm thick. The module uses quick connect terminals (0.189" / 4.8mm) for internal wiring.</p><p>&nbsp;</p><p>Electrical characteristics include a dielectric strength of &gt;3kV between L-N and &gt;4kV between L/N-PE (50 Hz, 1 min). The operating temperature range is -25°C to +70°C, with a pin temperature rating of 70°C. The housing is made of black thermoplastic with a UL94 V-0 flammability rating, and the front side offers IP40 ingress protection.</p><p>&nbsp;</p><p>This module is suitable for equipment requiring protection class I per IEC 61140. It is approved by CCC, CSA, ENEC, and UL. The snap-in mounting simplifies assembly, and the illuminated switch provides clear on/off status indication.</p>

<p>The Schurter Inc. 0034.2516 is a 5x20mm glass cartridge fuse rated for 1A continuous current. It is designed for 250VAC and 125VDC operation with a medium-time-lag (M) response characteristic, making it suitable for applications with moderate inrush currents. The fuse offers an 80A breaking capacity at 250VAC.</p><p>&nbsp;</p><p>This fuse is part of the FSM 5x20 series and features nickel-plated copper alloy endcaps with a glass/ceramic tube. It requires a separate fuseholder or clip for mounting. The operating temperature range is -40°C to 85°C, and storage conditions are 0°C to 60°C with a maximum 70% relative humidity.</p><p>&nbsp;</p><p>Typical applications include overcurrent protection in power supplies, industrial controls, and consumer electronics where medium time-lag characteristics are needed. The fuse is RoHS3 compliant and REACH unaffected.</p>

<p>The Schurter 4303.5031 is a KFC series power entry module integrating an IEC 320-C14 appliance inlet, EMI/RFI commercial filter, fuseholder, and optional voltage selector into a single panel-mount unit. It accepts 5x20mm or 6.3x32mm fuses (drawer sold separately) and features a 3-position voltage selector for global voltage compatibility.</p><p>&nbsp;</p><p>Electrical ratings: 1A at 250VAC (IEC and UL/CSA). Leakage current is &lt;0.5mA standard or &lt;5µA medical version. Dielectric strength exceeds 1.7kVDC between L-N and 2.7kVDC between L/N-PE. Operating temperature range is -25°C to 85°C with climatic category 25/085/21.</p><p>&nbsp;</p><p>Mechanical: panel mount with flange, quick connect terminals (4.8x0.8mm), panel cutout 28.60mm x 50.00mm, max panel thickness 8mm. Protection class I, IP40 rated. Fully potted construction for high resistance. V-Lock cord retaining notch available.</p><p>&nbsp;</p><p>Approvals: cULus, ENEC. Compliant with RoHS3 (unverified), REACH unaffected, MSL 1 (unverified). Suitable for use in medical equipment per IEC 60601-1 (1 MOOP/1 MOPP) and IT equipment per IEC 62368-1.</p>

<p>The Schurter 4303.2014.02 is a Fusedrawer 3 series accessory combining a fuse holder and voltage selector insert in a single snap-in rear mounting component. It accepts standard 5x20 mm or 6.3x32 mm fuse links and provides voltage selection options of 110V, 150V, and 220V.</p><p>&nbsp;</p><p>Designed for use with Schurter power entry modules including CD, CD-Bowdencable, KD, KD-Bowdencable, KEC, and KFC series, this fuse drawer is suitable for equipment complying with IEC/UL 62368-1 and IEC 60601-1 safety standards. The snap-in rear mounting allows secure installation without additional hardware.</p><p>&nbsp;</p><p>The fuse drawer is not enclosed and must be ordered separately from the fuse links. It meets RoHS3, REACH, and China RoHS environmental compliance requirements, and is rated for industrial and medical applications.</p>

<p>The Schurter 6424.0251.12 is a power entry module with an IEC 320-C14 receptacle, designed for panel mount snap-in installation from the front side. It integrates a 2-pole on-off switch and a fuse holder accommodating 5x20mm fuse-links (fuses not included). The module is rated for 10A at 250VAC and is suitable for protection class I equipment. The housing is made of black thermoplastic with a UL94 V-0 flammability rating, and the front side offers IP40 protection per IEC 60529. Terminations are solder eyelet type. Operating temperature range is -25°C to 70°C. This part is part of the Felcom 64 series and is approved by CSA, ENEC, and UL.</p>

<p>The Schurter 6051.2032 is a power cord designed for connecting equipment with an IEC 320-C13 inlet to a GB2099 (Chinese standard) mains outlet. The cord is 2.00 meters (6.56 feet) long, unshielded, and features a black jacket. It contains 3 conductors of 17 AWG wire and is rated for 10A at 250VAC.</p><p>&nbsp;</p><p>The cord uses cord type RVV 300/500 and is approved with CCC marking for use in China. It includes a V-Lock feature for secure connection to compatible inlets. The operating temperature range is -25°C to 70°C.</p>

<p>The Schurter 0031.1681 is a shock-safe panel mount fuseholder designed for 5x20mm and 6.3x32mm cartridge fuses. It features a slotted cap and solder lug terminals. The fuseholder is rated for 10A (VDE) and 20A (UL/CSA) at 250VAC (VDE) and 600VAC/DC (UL/CSA). It has a dielectric strength greater than 3kV and contact resistance ≤10 mΩ. The socket is made of thermoplastic UL94V-0, and terminals are tin-plated copper alloy. It operates from -40°C to 85°C and has an IP40 rating. Suitable for protection class I equipment per IEC 61140. Applications include medical equipment and other industrial uses.</p>

<p>The Schurter 5220.0623.3 is a power entry module that combines an IEC 320-C14 appliance inlet with an EMI/RFI line filter and a 2-pole fuseholder for 5x20mm fuses. It features a compact design with a stainless steel filter case and potted filter for high reliability. The module is rated for 6A at 250VAC and offers both standard (&lt;0.5 mA) and medical (&lt;5 µA) leakage current options. Electrical isolation meets 1.7 kVDC between line and neutral and 2.7 kVDC between line/neutral and ground.</p><p>&nbsp;</p><p>The module supports panel mounting with either screw-on (max panel thickness 8 mm) or snap-in (0.8 to 3 mm) methods. Terminations are quick connect 0.250 inch (6.3 mm) tabs. The front side is rated IP40 for splash protection. The thermoplastic housing is UL 94V-0 rated for flammability. It is approved by cULus and ENEC for international use.</p><p>&nbsp;</p><p>This power entry module is suitable for applications requiring filtered AC power entry with fuse protection, including medical equipment (per IEC/UL 60601-1), commercial electronics, and industrial controls. The operating temperature range is -25°C to 85°C with a MTBF of 2,300,000 hours.</p>