Schurter Inc.

<p>The Schurter 6100.4115 is a panel mount IEC 320-C14 appliance inlet/receptacle designed for commercial applications. It accepts male blades (C14 plug) and provides solder eyelet connections. Rated for 10A at 250VAC (IEC) and 15A at 250VAC (UL/CSA), it is suitable for protection class I equipment. The snap-in mounting allows easy front-side panel installation into a rectangular cutout of 27.50mm x 20.00mm, accommodating panel thicknesses from 1.0mm to 2.5mm (specifically 1.50mm). The black thermoplastic housing meets UL94 V-0 flammability rating. This unfiltered version is typically used where EMI filtering is not required. Operating temperature range is -25°C to 70°C, with an IP30 protection rating on the front side. Approvals include CCC, cULus, and ENEC.</p>

<p>The Schurter 6200.4320 is a panel mount IEC 320-C14 power entry module with an integrated 1-pole fuseholder for 5x20mm fuses. It is rated for 10A at 250VAC (IEC and UL/CSA) and features an unfiltered commercial grade design. The module snaps into a rectangular panel cutout of 27.50mm x 31.50mm and accepts panel thicknesses from 1mm to 3mm. It provides quick connect (0.250") and solder terminals for easy wiring. The housing is made of black thermoplastic with UL94 V-0 flammability rating. The front side offers IP40 protection. It meets protection class I requirements and is approved by CCC, CSA, ENEC, and UL. The fuseholder is Shocksafe PC2 per IEC 60127-6 and requires plug removal for fuse replacement. Suitable for use in equipment per IEC/UL 62368-1 and IEC 60335-1 for unattended appliances.</p>

<p>This Schurter D1TD series fuse, model 7030.3230, is a 5x20mm glass cartridge fuse rated for 160mA and 220VAC. It features a slow-blow (time-lag) response, making it suitable for circuits with inrush currents. The fuse offers a breaking capacity of 50A at rated voltage.</p><p>&nbsp;</p><p>Electrical characteristics include a melting I²t value of 0.2 A²s. The operating temperature range is -40°C to 70°C. The fuse requires a holder for mounting, typical of 5x20mm cartridge fuses. It carries UR approval and is RoHS3 compliant, REACH unaffected, with an MSL of 1 (unlimited).</p>

<p>The Schurter 0031.1383 is a single-circuit panel mount fuseholder designed for 5mm x 20mm cartridge fuses. It has a current rating of 10A and a voltage rating of 250V. Termination is via solder lugs, and the contacts are made of copper alloy with a tin finish. The holder is intended for overcurrent protection in various applications. It is RoHS3 compliant and has an MSL of 1 (unlimited). No additional design specifications are available.</p>

<p>The Schurter Inc. 0034.1506 is a miniature fast-acting (quick-acting F) glass tube fuse rated at 100 mA and 250 VAC. It is designed for primary protection in equipment and complies with IEC 60127-2, UL 248-14, and CSA C22.2 no. 248.14 standards.</p><p>&nbsp;</p><p>This fuse features a low breaking capacity of 35 A and a melting I²t of 0.0014 A²s. The glass tube construction with nickel-plated copper alloy endcaps ensures reliable performance. The operating temperature range is -55°C to 125°C, with a climatic category of 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The 5x20 mm cartridge package requires a holder for mounting. Typical power dissipation at 1.5 times rated current is 1600 mW maximum and 400 mW typical. The fuse is approved by CCC, cURus, and VDE agencies.</p>

<p>The EF12.0885.2110.01 from Schurter Inc. is a filtered power entry module (PEM) designed for commercial EMI/RFI filtering applications. It features an IEC 320-C20 connector style with a receptacle, male blades - module configuration. The module is rated for 15A continuous current at 250VAC, with an integrated circuit breaker and switch on-off functionality for safe power control.</p><p>&nbsp;</p><p>This PEM is panel mountable with a flange, requiring a rectangular cutout of 33.90mm x 81.00mm. Termination is via quick connect tabs of 0.250" (6.3mm) for easy installation. The housing is shielded for electromagnetic compatibility and meets IP40 ingress protection. The module is constructed with materials that achieve UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Designed for commercial equipment, this power entry module provides combined filtering, switching, and circuit protection in a single package. It is approved by cURus and ENEC, and is compliant with RoHS3 and REACH standards. The moisture sensitivity level is 1 (unlimited). Note: This module does not accommodate a fuse.</p>

<p>The Schurter 4785.0000 is a rewireable IEC 320-C13 appliance outlet designed for cable mounting. It features a right-angle configuration with screw terminals, enabling easy field wiring. The connector houses 3 female socket positions and is rated for 10A at 250VAC (IEC 60320-1) and 15A at 250VAC (UL 498 / CSA C22.2 no. 42).</p><p>&nbsp;</p><p>Electrical isolation is ensured by a dielectric strength greater than 2 kVAC between line-neutral and line-neutral-to-ground. The operating temperature range spans -25°C to 70°C, with a pin temperature rating of 70°C. The housing is made of black thermoplastic with a UL94 V-0 flammability rating, suitable for use in protection class I applications per IEC 61140.</p><p>&nbsp;</p><p>This unfiltered commercial-grade connector is suitable for power supply cords and equipment requiring a detachable C13 outlet. Approvals include CCC, cULus, and VDE, confirming compliance with major international safety standards.</p>

<p>The Schurter 3404.0017.11 is a surface mount fuse from the OMF 125 series. It is rated for 5A continuous current at 125VAC and 125VDC with a fast blow (quick-acting) response. The fuse provides 100A breaking capacity at rated voltage, making it suitable for overcurrent protection in moderate-power circuits.</p><p>&nbsp;</p><p>The fuse features a compact 2-SMD J-Lead package measuring 7.40mm x 3.10mm x 2.60mm, designed for direct PCB soldering. It has a melting I²t of 2.9 A²s and can operate over a temperature range of -55°C to 125°C. The housing is made of thermoplastic rated UL 94V-0, and terminals are copper alloy with tin plating.</p><p>&nbsp;</p><p>Typical applications include overcurrent protection in power supplies, industrial controls, and other electronic assemblies where board space is limited. The fuse is compatible with reflow and wave soldering processes and meets MSL 1 moisture sensitivity level.</p>

<p>The Schurter 4302.5311 is a filtered and shielded IEC 320-C14 power entry module designed for AC power input applications. It integrates a receptacle with male blades, an EMI/RFI filter for commercial use, and a built-in on-off switch, all in a compact panel-mount package. The module is rated for 1A at 250VAC and provides quick connect terminals (0.250" / 6.3mm) for easy wiring.</p><p>&nbsp;</p><p>This module features a shielded construction to reduce electromagnetic interference and is housed in a UL94 V-0 rated flame-retardant material. It offers IP40 ingress protection and requires a rectangular panel cutout of 28.50mm x 43.00mm. The part is approved by CCC, cULus, and ENEC, ensuring compliance with international safety standards.</p><p>&nbsp;</p><p>Ideal for power supplies, industrial controls, and medical equipment, the 4302.5311 combines filtering, switching, and a standard IEC inlet in a single component. The panel mount flange ensures secure installation, and the quick connect termination simplifies assembly. No fuse accommodation is provided.</p>

<p>The Schurter Inc. 7010.3460 is a miniature glass cartridge fuse rated at 3.15A and 125VAC. It features a fast blow (quick-acting) characteristic, making it suitable for applications requiring rapid overcurrent protection. The fuse has a breaking capacity of 60A at rated voltage.</p><p>&nbsp;</p><p>The fuse is designed with a glass tube and nickel-plated copper alloy end caps, with a unit weight of 1.2g. It offers a pre-arcing time of 60 minutes minimum at 1.15x In, and 200ms maximum at 3.0x In. The melting I²t is 7.1 A²s. Operating temperature range is -40°C to 70°C.</p><p>&nbsp;</p><p>The 5x20mm (0.197" x 0.787") package requires a fuseholder or clip for mounting. It is part of the Schurter D1 series. The fuse is compliant with RoHS and REACH directives.</p>

<p>This is a cartridge fuseholder from Schurter Inc., designed for use with 5mm x 20mm cartridge fuses. It is rated for 6.3A continuous current at 250V AC/DC.</p><p>&nbsp;</p><p>The holder features a horizontal orientation and through hole mounting with PC pin termination, making it suitable for PCB integration. The contact material is copper alloy with tin finish.</p><p>&nbsp;</p><p>With a single circuit configuration, this fuseholder provides reliable protection in various electronic applications. The RoHS3 and REACH compliant status indicates environmental compliance, though unverified.</p>

<p>The Schurter 3101.0040 is a shock-safe cartridge fuseholder from the FPG4 series. It is designed for 5x20mm fuses and offers a rated current of 16A (UL/CSA) or 10A (VDE) at a rated voltage of 500V (UL/CSA) or 250VAC (VDE). The holder features a vertical orientation and through-hole PCB mounting with solder THT terminals.</p><p>&nbsp;</p><p>Key electrical characteristics include a contact resistance of ≤10 mΩ at 100 mA, dielectric strength &gt;3 kV, impulse withstand voltage &gt;4 kV, and insulation resistance ≥10 MΩ. The fuseholder is rated for a power acceptance of 2.5W at 10A and 23°C. It is suitable for overvoltage category II and pollution degree 2 per IEC 60664-1.</p><p>&nbsp;</p><p>Mechanically, the holder uses a thermoplastic socket with UL 94V-0 flammability rating and tin-plated copper alloy terminals. It provides IP40 degree of protection and operates over an ambient temperature range of -40°C to 85°C. The climatic category is 40/085/21 per IEC 60068-1. The unit weighs 4.66g and is designed for wave soldering with a solderability profile of 245°C/3 sec and resistance to soldering heat of 260°C/10 sec.</p>

<p>The Schurter FAB series shock-safe fuseholder (part number 0031.3551) is designed for 5x20mm cartridge fuses. It features a horizontal orientation with through-hole PC pin termination for direct PCB mounting. The holder is rated for 250VAC operation with a dual current rating of 10A per VDE and 12A per UL standards.</p><p>&nbsp;</p><p>Electrical characteristics include a rated power acceptance of 2.5W at 10A and 23°C ambient temperature, contact resistance ≤10mΩ at 100mA, dielectric strength &gt;3kV between live parts, and impulse withstand voltage &gt;4kV. The holder meets overvoltage category III and pollution degree 3 per IEC 60664-1.</p><p>&nbsp;</p><p>The socket and cap are molded from thermoplastic rated UL 94V-0. Terminals are copper alloy with tin plating. The unit weight is 5.4g. It is suitable for wave soldering with a solderability rating of 245°C for 3 seconds and resistance to soldering heat of 260°C for 10 seconds.</p>

<p>The Schurter 7047.1350 is a cartridge fuse designed for overcurrent protection in electrical and industrial circuits. It is rated for 30 amperes at 125 volts AC, with a breaking capacity of 500 amperes at 125VAC. The fuse features a slow-blow (time-delay) response, making it suitable for applications with inrush currents. The operating temperature range is -40°C to 55°C. The fuse is packaged in a 5AG, 10mm x 38mm (Midget) size, requiring a holder for mounting. Physical dimensions are 0.406 inches diameter by 1.496 inches length (10.30mm x 38.00mm). The fuse is RoHS3 compliant, REACH unaffected, and has an MSL level of 1 (unlimited). This product is commonly used in electrical and industrial settings where reliable overcurrent protection is needed.</p>

<p>The Schurter 4795.0000 is an IEC 320-C19 power entry plug designed for commercial applications requiring a reliable AC power connection. It features a 3-position female socket configuration with screw termination for secure wire attachment. The plug is rated for 16A continuous current at 250VAC, making it suitable for high-power equipment such as servers, power distribution units, and industrial machinery.</p><p>&nbsp;</p><p>This unfiltered commercial-grade plug is free hanging (in-line) mounted, offering flexibility in cable assembly designs. The housing is constructed from materials with a UL94 V-0 flammability rating, ensuring fire safety compliance. The part carries approvals from CCC, cULus, and ENEC agencies, indicating broad international acceptance.</p><p>&nbsp;</p><p>Designed without a fuse holder, this plug is intended for use in systems where overcurrent protection is provided externally. Its robust screw termination simplifies field wiring and maintenance. The 4795.0000 is a direct replacement for standard C19 connectors in power cord assemblies.</p>

<p>The Schurter Inc. 0031.1673 is a panel mount fuse holder designed for cartridge fuses. It accommodates both 0.25" diameter x 1.26" long (6.35mm x 32mm) and 5mm x 20mm fuse sizes. The holder is rated for 20A continuous current at 250V AC/DC. Termination is via solder lugs for secure connections. The contacts are made of copper alloy with a tin finish, providing reliable electrical conductivity and corrosion resistance. This single-circuit holder is suitable for overcurrent protection in various industrial and commercial equipment. The panel mount design allows for easy installation and fuse replacement.</p>

<p>The Schurter 5200.0643.1 is a filtered power entry module in the 5200 series, combining an IEC 320-C14 inlet, a 1-pole Shocksafe PC2 fuseholder for 5x20 mm fuses, and a commercial-grade EMI/RFI line filter in a compact unit.</p><p>&nbsp;</p><p>Electrical ratings: 6A at 250VAC (IEC and UL/CSA). Leakage current is less than 0.5 mA in the standard version. Dielectric strength exceeds 1.7 kVDC between line and neutral, and 2.7 kVDC between line/neutral and protective earth.</p><p>&nbsp;</p><p>Mechanical features include panel snap-in mounting for panel thickness 0.79 to 3.00 mm, or screw-on mounting up to 8 mm. Terminals are quick connect 6.3 x 0.8 mm. The housing is rated IP40 front side and uses UL94 V-0 flame-rated material. V-Lock notch is standard for cord retention.</p>

<p>The Schurter DD11.0121.1111 is a compact power entry module combining an IEC 320-C14 appliance inlet, a 2-pole rocker switch (On-Off), and a fuseholder for 5x20mm fuses (1- or 2-pole, drawer sold separately) in a single panel-mount package. It is rated for 10 A at 250 VAC (IEC/UL/CSA) and features quick-connect terminals (4.8 x 0.8 mm). The housing is made of thermoplastic with a UL94 V-0 flammability rating and provides IP40 protection on the front side.</p><p>&nbsp;</p><p>This unfiltered module is designed for protection class I equipment and includes a V-Lock notch for secure cord retention. It meets the requirements of IEC/UL 62368-1 and passes glow wire tests per IEC 60695-2-11/-12/-13. The operating temperature range is -25°C to +85°C. Panel mounting is via screw-on from the front side; the recommended panel cutout is 28.10 mm x 47.10 mm, accepting a maximum panel thickness of 8 mm.</p>