ABB Power Electronics

<p>The APXS002A0X-SRZ is a Non-Isolated Point-of-Load (PoL) module from ABB Power Electronics. It delivers a single adjustable output from 0.6V to 5.5V with a maximum current of 2A and power rating of 15W. Typical efficiency is 93%.</p><p>&nbsp;</p><p>This converter operates over a temperature range of -40°C to 85°C and includes protection features such as overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). Control is via an active-low enable input.</p><p>&nbsp;</p><p>The module is housed in a 10-SMD package measuring 12.2mm x 12.2mm x 6.3mm and is designed for surface mount assembly. It is intended for commercial ITE (Information Technology Equipment) applications.</p>

<p>The AXA005A0X-SRZ is a non-isolated point-of-load (PoL) DC-DC converter module from the Austin MicroLynx series by ABB Power Electronics. It accepts a 10V to 14V input bus and provides a precisely regulated output voltage programmable from 0.75V to 5.5V via an external resistor, delivering up to 5A of output current (27W).</p><p>&nbsp;</p><p>Typical efficiency reaches 89% at 3.3V full load with a 12V input. The module features line regulation of 0.3%, load regulation of 0.4%, and temperature regulation of 0.4%. Protection features include remote on/off, output overcurrent protection (non-latching), over-temperature protection, and under-voltage lockout.</p><p>&nbsp;</p><p>Housed in a compact 5-SMD surface-mount package measuring 20.3mm x 8.9mm x 7.2mm, the module operates over a -40°C to +85°C temperature range. It is designed for distributed power architectures, intermediate bus voltage applications, telecommunications equipment, servers, storage, and networking equipment.</p>

<p>The ATH030A0X3-SRHZ is a high-efficiency non-isolated point-of-load (PoL) DC-DC converter from ABB Power Electronics. It delivers a programmable output voltage from 0.8V to 3.6V with a maximum output current of 30A and total power of 100W. The module achieves efficiency up to 92.2%, reducing thermal management requirements.</p><p>&nbsp;</p><p>This converter includes essential protection features: remote on/off control, overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). Control is via an enable input with active-low logic. The module is designed for commercial ITE applications and operates over a temperature range of -40°C to 85°C.</p><p>&nbsp;</p><p>The converter is housed in a compact 10-SMD module measuring 33.0mm x 13.5mm x 9.1mm and is surface-mountable for automated assembly. Input voltage range is 4.5V minimum (maximum not specified from available data).</p>

<p>The APTS012A0X3-SRZ is a non-isolated point-of-load (PoL) DC-DC converter module manufactured by ABB Power Electronics. It operates from a 4.5V minimum input voltage and provides a regulated output adjustable from 0.7V to 5.5V, delivering up to 12A of output current and 66W of output power.</p><p>&nbsp;</p><p>This converter achieves a typical efficiency of 94%, minimizing power loss in space-constrained applications. It includes protection features such as overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). The control interface supports remote on/off with an active-low enable signal.</p><p>&nbsp;</p><p>The module is housed in a compact 10-SMD surface-mount package measuring 20.3mm x 11.4mm x 8.5mm. It is designed for commercial ITE (Information Technology Equipment) applications and can operate over a wide temperature range of -40°C to +85°C.</p>

<p>The CC025ABK-M is a triple-output isolated DC-DC converter module from ABB Power Electronics, part of the CC025 Triple-Output Series. It delivers a total output power of 25W from a nominal 28V (18-36V) input. The main output provides 5V at 5A, while the auxiliary outputs offer 12V and -12V at 1A each. The module achieves typical efficiency of 82% and provides 500Vdc isolation (850V transient).</p><p>&nbsp;</p><p>The converter is housed in a compact 10-DIP through-hole package measuring 71.1mm x 61.0mm x 12.7mm. It features remote on/off control (positive logic), overcurrent protection (OCP), and overvoltage protection (OVP). The metal case provides good thermal performance, with an operating case temperature range of -40°C to 100°C and storage from -55°C to 125°C.</p><p>&nbsp;</p><p>Design applications include distributed power architectures, telecommunications equipment, and commercial ITE (Information Technology Equipment) systems. The module is designed to meet UL, CSA, and VDE safety standards and complies with FCC and CISPR Class A radiated emissions limits. The industry-standard pinout simplifies integration into existing designs.</p>

<p>The APTS003A0X-SRZ is a non-isolated point-of-load (PoL) DC-DC converter module from ABB Power Electronics. It provides a single adjustable output voltage ranging from 0.6V to 5.5V with a maximum output current of 3A, delivering up to 16W of power. The module achieves a high efficiency of 92% under typical operating conditions.</p><p>&nbsp;</p><p>Key features include remote on/off control, overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). The control interface supports enable with active low logic. The module is designed for commercial ITE (Information Technology Equipment) applications and operates over a temperature range of -40°C to 85°C.</p><p>&nbsp;</p><p>The converter is housed in a compact 10-SMD surface mount package measuring 12.2mm x 12.2mm x 6.3mm, making it suitable for space-constrained designs. The input voltage range starts from 4.5V minimum (maximum input voltage not specified in available data).</p>

<p>The AXB050X43-SRZ is a Non-Isolated Point-of-Load (PoL) DC DC Converter from ABB Power Electronics. It accepts a maximum input voltage of 20V and provides an adjustable output voltage from 5V to 15V, with a maximum output current of 8A and a nominal output power of 50W. The converter achieves a typical efficiency of 94%, making it suitable for power-sensitive applications.</p><p>&nbsp;</p><p>This module includes protection features such as Overcurrent Protection (OCP), Overtemperature Protection (OTP), and Under-Voltage Lockout (UVLO). It also supports remote on/off control with an active-high enable input. The device is designed for commercial ITE (Information Technology Equipment) applications.</p><p>&nbsp;</p><p>The AXB050X43-SRZ is housed in a 6-SMD Module package measuring 33.0mm x 13.5mm x 8.3mm and is designed for surface mount assembly. It operates over a temperature range of -40°C to 85°C.</p>

<p>The AXH005A0X-SRZ is a non-isolated Point-of-Load (PoL) DC DC converter module from ABB Power Electronics. It operates from a nominal 3V input and provides an adjustable output voltage from 0.8V to 3.6V, with a maximum output current of 5A and total power of 18W. The module achieves high efficiency up to 94%, reducing power loss in compact designs.</p><p>&nbsp;</p><p>Key features include remote on/off control, overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). The control features are enable active low. The converter is housed in a 5-SMD surface mount package measuring 20.3mm x 11.4mm x 6.2mm, suitable for automated assembly.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 85°C, making it suitable for commercial ITE applications. The module is designed for use in distributed power architectures where space is limited and efficiency is critical.</p>

<p>The EVW010A0B41Z is an isolated DC-DC converter module from ABB Power Electronics. It provides a single regulated 12V output with 10A current capability, delivering up to 120W. The module features a high efficiency of 93.5% for reduced thermal dissipation.</p><p>&nbsp;</p><p>Designed for commercial ITE applications, this converter offers comprehensive protection features including overcurrent (OCP), overtemperature (OTP), overvoltage (OVP), and undervoltage lockout (UVLO). It supports remote on/off control with active low enable.</p><p>&nbsp;</p><p>The converter operates over a wide temperature range of -40°C to 85°C. It comes in a compact through-hole module package measuring 57.9mm x 22.8mm x 8.5mm, making it suitable for space-constrained designs.</p>

<p>The ABB Power Electronics AXH010A0FZ is a non-isolated, point-of-load (PoL) DC-DC converter module designed to deliver a regulated 3.3V output at up to 10A, providing 33W of output power. It achieves a high efficiency of 95%, minimizing power loss and thermal stress in demanding applications.</p><p>&nbsp;</p><p>This module uses an 11-SIP (Single In-line Package) with through-hole mounting, making it suitable for automated assembly. It includes control features such as Enable (Active Low), remote On/Off, overcurrent protection (OCP), and overtemperature protection (OTP) for robust system operation. The operating temperature range of -40°C to 85°C allows deployment in commercial and industrial environments.</p><p>&nbsp;</p><p>Designed for ITE (commercial) applications, the AXH010A0FZ is ideal for powering FPGAs, ASICs, and other digital loads requiring a low-voltage, high-current supply from a higher-voltage bus. Its compact SIP footprint enables high-density power architectures.</p>

<p>The AXH016A0X3-SRZ is a non-isolated point-of-load (PoL) DC DC converter module from ABB Power Electronics. It delivers a single adjustable output voltage from 0.8V to 3.6V with a maximum output current of 16A, providing up to 58W of power. The module achieves up to 95% efficiency, making it suitable for power-sensitive applications.</p><p>&nbsp;</p><p>This converter operates from a 3V minimum input voltage and includes remote on/off control, overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). The control features include enable and active low logic. It is designed for commercial ITE (Information Technology Equipment) applications.</p><p>&nbsp;</p><p>The module is housed in a 6-SMD package with surface mount mounting. Dimensions are 33.0mm x 13.5mm x 8.3mm. It operates over a temperature range of -40°C to 85°C.</p>

<p>The ATS030A0X3-SRPHZ is a Non-Isolated Point-of-Load (PoL) DC DC converter module from ABB Power Electronics. It provides a single adjustable output voltage from 0.8V to 2.75V with a maximum output current of 30A, delivering up to 165W of power. The module achieves up to 93% efficiency, reducing thermal dissipation in space-constrained designs.</p><p>&nbsp;</p><p>This surface-mount module comes in a compact 5-SMD package measuring 33.0mm x 9.1mm x 13.5mm. It includes protection features such as overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). Control is via an enable input with active-low logic, and remote on/off capability is supported.</p><p>&nbsp;</p><p>Designed for commercial ITE (Information Technology Equipment) applications, the module operates over a temperature range of -40°C to 85°C. The input voltage range starts at 6V minimum, making it suitable for intermediate bus architectures and distributed power systems.</p>

<p>The AXH010A0PZ is a non-isolated Point of Load (PoL) DC-DC converter designed for commercial ITE applications. It provides a single regulated 1.2V output at up to 10A, delivering 12W of power. The converter operates from a minimum input voltage of 3V (full range not specified). The efficiency is rated at 86% (low confidence). The module includes protection features such as overcurrent (OCP) and overtemperature (OTP) protection, and supports remote on/off control with active low enable. The through-hole package is an 11-SIP module measuring 50.8mm x 8.1mm x 12.7mm, suitable for compact board-level power designs. The operating temperature range is -40°C to 85°C.</p>

<p>The EQD075A41Z is a high-efficiency isolated DC-DC converter module from ABB Power Electronics, part of the EQD075 series. It accepts a wide input voltage range of 18V to 60V and provides a programmable output voltage from 3.0V to 5.5V (factory set for 3.3V to 5V). The module delivers up to 75W of output power with a maximum output current of 20A at 3.3V and 15A at 5V. Typical efficiency reaches 92% at 5V full load with 24V input, contributing to reduced thermal management requirements.</p><p>&nbsp;</p><p>The converter features industry-standard eighth-brick footprint (57.9 mm x 22.8 mm x 8.5 mm) with through-hole mounting in an 8-DIP module package. It includes comprehensive protection features such as overcurrent, overvoltage, overtemperature, and undervoltage lockout. Control features include remote on/off with active low enable and remote sense for accurate output voltage regulation. Basic insulation of 1500V is provided between input and output.</p><p>&nbsp;</p><p>This module is designed for distributed power architectures, wireless networks, optical and access network equipment, and enterprise networking applications. It is certified to UL 60950-1, CSA 22.2 No. 60950-1-03, and VDE 0805 (EN60950-1) safety standards.</p>

<p>The APTS006A0X-SRZ is a non-isolated point-of-load (PoL) DC-DC converter module from ABB Power Electronics. It delivers a regulated output voltage adjustable from 0.6V to 5.5V with a maximum output current of 6A, providing up to 33W of output power. The module operates from a minimum input voltage of 4.5V and achieves a high efficiency of 93%.</p><p>&nbsp;</p><p>This converter includes protection features such as overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO). Control is provided via an enable input with active low logic, and remote on/off capability is supported. The device is designed for commercial ITE (Information Technology Equipment) applications.</p><p>&nbsp;</p><p>The module is housed in a compact 10-SMD package measuring 12.2mm x 12.2mm x 7.3mm, suitable for surface mount assembly. It operates over a wide temperature range of -40°C to 85°C.</p>

<p>The EHHD006A0B41Z is a single-output isolated DC-DC converter module from ABB Power Electronics' Hammerhead series. It provides a regulated 12V output at up to 6A (72W) from an ultra-wide input voltage range of 18V to 75V. The module features a high efficiency of 92.5% and 2250V isolation.</p><p>&nbsp;</p><p>Designed for commercial ITE applications, the converter includes protection features such as remote on/off, overcurrent (OCP), overtemperature (OTP), overvoltage (OVP), and under-voltage lockout (UVLO). It uses an active low enable control logic.</p><p>&nbsp;</p><p>The converter is housed in a through-hole 8-DIP module with a standard 1/8 brick footprint (57.9mm x 22.9mm x 7.8mm). It operates over a wide temperature range of -40°C to 85°C, making it suitable for demanding environments.</p><p>&nbsp;</p><p>This module is RoHS3 compliant and REACH unaffected, meeting environmental standards. Typical applications include distributed power architectures, wireless networks, access and optical network equipment, and industrial equipment.</p>

<p>The AXA003A0XZ is a non-isolated point-of-load (PoL) DC/DC converter module from ABB Power Electronics. It provides a single output rated at 3A continuous current with an adjustable output voltage range of 0.8V to 5.5V, delivering up to 16W of power. The module operates from an 8.3V input and achieves a typical efficiency of 91%. It includes protection features such as overcurrent protection (OCP), overtemperature protection (OTP), and undervoltage lockout (UVLO), as well as remote on/off control with active low enable.</p><p>&nbsp;</p><p>This converter is designed for commercial ITE (Information Technology Equipment) applications. It is packaged in a compact 5-SIP (Single In-line Package) with through-hole mounting, measuring 22.9mm x 6.6mm x 10.2mm (0.90" x 0.26" x 0.40"). The operating temperature range from -40°C to 85°C allows use in a variety of environments. The module is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited).</p>