TE Connectivity

<p>The TE Connectivity 929975-1 is a stamped and formed socket contact designed for the Round Connector System. It accommodates 13-17 AWG wire (1-2.5 mm²) with a wire insulation diameter of 2.2-3 mm. The contact uses an F-crimp termination method and is tin plated on both the interface and termination area.</p><p>&nbsp;</p><p>This sealable contact features a locking lance primary locking mechanism and supports a single wire seal (SWS) for environmental protection. It is rated for a typical current of 34 A with a power transmission range of 25-40 A. The mating pin diameter is 2.5 mm.</p><p>&nbsp;</p><p>The contact is uninsulated and operates over a temperature range of -40 to 130 °C. It is supplied on a reel in quantities of 3000 pieces.</p>

<p>The TE Connectivity 34119 is a non-insulated ring terminal designed for 14-16 AWG wire with a #4 stud size. It features a circular terminal type and is terminated via crimp, making it suitable for free hanging (in-line) mounting. The contact is made of copper with a tin finish, ensuring reliable conductivity and corrosion resistance. The terminal includes a brazed seam and serrated termination for secure wire grip and mechanical strength. With dimensions of 12.19mm length, 6.35mm width, and 0.79mm thickness, this compact ring connector is ideal for power and signal connections in various electrical assemblies.</p>

<p>The TE Connectivity 41274-1 is a non-insulated quick disconnect receptacle designed for 14-18 AWG wire. It features a 0.250" (6.35mm) tab width, 0.032" (0.81mm) tab thickness, and 0.305" (7.75mm) tab length, making it compatible with standard 0.250" quick disconnect tabs. The overall length is 19.18mm (0.755").</p><p>&nbsp;</p><p>The terminal is crimp-type for secure wire attachment and is free hanging (in-line) for installation flexibility. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. As a standard terminal type, it is suitable for general-purpose quick disconnect applications.</p><p>&nbsp;</p><p>This part is RoHS3 compliant and REACH unaffected, though compliance data is unverified. It is manufactured by TE Connectivity, a leading supplier of interconnect solutions.</p>

<p>The TE Connectivity 3-640442-2 is a rectangular connector receptacle designed for free hanging, in-line, or right-angle mounting. It features a 2-position single-row configuration with a 2.54mm pitch suitable for discrete or ribbon cable terminations using IDC (Insulation Displacement Contact) technology.</p><p>&nbsp;</p><p>This receptacle accepts 26 AWG wire and uses female socket contacts with a tin finish that is 80.0µin (2.03µm) thick. The housing is blue and includes a locking ramp for secure mating. The closed-end design prevents contact with uninsulated conductors.</p><p>&nbsp;</p><p>Typical applications include internal wiring in electronic equipment, control systems, and data communication devices where a compact, reliable connection is required. The IDC termination allows quick assembly without stripping or soldering.</p>

<p>The TE Connectivity 180373-2 is a non-insulated female quick disconnect terminal designed for reliable wire-to-tab connections. It features a 0.312" (7.92mm) tab width, 0.032" (0.81mm) tab thickness, and 0.339" (8.60mm) tab length, accommodating 13-17 AWG wire gauge. The terminal is constructed from tin-plated brass, offering good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The 90° flag (angled) design allows for right-angle mounting, making it suitable for space-constrained applications where a straight terminal would not fit. The crimp termination ensures a secure mechanical and electrical connection. This terminal is free hanging (in-line) and does not require insulation, simplifying installation in applications where insulation is not needed.</p><p>&nbsp;</p><p>Typical applications include automotive wiring harnesses, appliance power connections, and industrial control systems. The terminal's robust construction and standard tab size make it a versatile choice for quick disconnect requirements.</p>

<p>This TE Connectivity 1-160760-2 is a non-insulated quick disconnect receptacle designed for reliable connections in a wide range of applications.</p><p>&nbsp;</p><p>The part features a 0.110" (2.79mm) tab width and accepts 26-30 AWG wire gauge with a crimp termination, ensuring a secure wire-to-terminal bond. The contact is made of brass with a tin finish, providing good conductivity and resistance to corrosion.</p><p>&nbsp;</p><p>Mechanically, the component is designed for free hanging (in-line) mounting and has an overall length of 14.00mm (0.551"). Its standard terminal type and female gender make it suitable for mating with 0.110" male tabs in high-vibration environments.</p><p>&nbsp;</p><p>The packaging details are not verified; therefore standard package quantity information should be sourced from a reliable distributor or manufacturer.</p>

<p>The TE Connectivity 926886-3 is a crimp pin contact designed for use with rectangular connector housings. It accepts wire gauges from 18 to 24 AWG, making it suitable for a variety of power and signal applications. The contact features a tin finish for good conductivity and corrosion resistance. It uses a stamped construction and crimp termination for secure and reliable connections.</p>

<p>The TE Connectivity 3-1827158-8 is a board-to-board header designed for surface mount applications. It has 8 positions in a single row with a 1.25mm pitch. The connector is shrouded with a 4-wall design for mating alignment and protection. Contacts are male pins made of brass with tin plating. The insulation is black polyphenylene sulfide (PPS) with a flammability rating of UL94 V-0. It includes features such as a board guide and pick-and-place capability for automated assembly. Electrical ratings are 0.5A current and 50V voltage. Operating temperature range is -30°C to 105°C. The fastening type is push-pull. This header is suitable for board-to-board connections in compact electronic devices.</p>

<p>The TE Connectivity 8-215083-0 is a 10-position rectangular plug connector from the MICRO-MATCH MOW series. It features a 2.54mm (0.100") pitch and 2 rows with 1.50mm row spacing, designed for free hanging (in-line) mounting. The connector uses IDC (Insulation Displacement Connection) termination for 28 AWG ribbon cable, with male pin contacts finished in tin. The housing is red and includes a feed-through feature. This connector is RoHS and REACH compliant, and is not low halogen.</p>

<p>The 1-215079-8 is a receptacle connector from TE Connectivity, part of the Micro-MaTch series. It features 18 positions arranged in 2 rows with a 2.54mm pitch, making it suitable for compact board-to-board or cable connections.</p><p>&nbsp;</p><p>The connector uses forked contacts with a tin finish for reliable electrical connections. It is designed for through hole mounting with kinked pin solder termination. The red insulation housing is rated UL94 V-0 for flammability resistance.</p><p>&nbsp;</p><p>The connector is rated for 100VDC and operates over a temperature range of -40°C to 105°C. It has a push-pull fastening type for easy mating and unmating.</p><p>&nbsp;</p><p>The 1-215079-8 is supplied in tape and reel packaging with 2500 connectors per reel, suitable for automated assembly processes.</p>

<p>The TE Connectivity 1-967616-1 is a 6-position rectangular connector housing designed as a receptacle (female socket) for wire-to-wire applications. It features a 4.00mm pitch and 3.50mm row spacing in a 2-row configuration, making it suitable for compact multi-wire connections. The housing is made of PBT-GF15 material and is black in color.</p><p>&nbsp;</p><p>This housing uses crimp contact termination and is designed for free hanging (in-line) mounting, offering flexibility in harness assembly. It includes a sealed feature, providing environmental protection for reliable performance in demanding conditions. The operating temperature range is -40°C to 120°C.</p><p>&nbsp;</p><p>Typical applications include automotive, industrial, and other environments where a robust, sealed connection is required. The housing accepts female socket contacts (sold separately) and is part of TE Connectivity's rectangular connector family.</p>

<p>The TE Connectivity 520942-1 is a 3-position non-gendered power ring housing designed for free hanging (in-line) mounting. This black housing accommodates power ring terminals and supports side-to-side stacking, enabling compact multi-connector configurations. Its non-gendered design simplifies mating and reduces inventory complexity. The housing is suitable for applications requiring reliable power connections in a space-efficient form factor.</p>

<p>The TE Connectivity 2-167301-2 is a crimp socket contact designed for rectangular connector systems. It accepts 20-24 AWG wire and features a tin contact finish with a plating thickness of 78.7µin (2.00µm). The crimp termination provides a reliable, gas-tight connection suitable for automated assembly.</p><p>&nbsp;</p><p>This socket contact is intended for use in rectangular connector housings and is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). The tin finish offers good solderability and corrosion resistance for general-purpose applications.</p><p>&nbsp;</p><p>Typical applications include wire-to-board and wire-to-wire interconnects in industrial, automotive, and consumer electronics where a secure crimp termination is required.</p>

<p>The TE Connectivity 172336-1 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. This plug housing accommodates 2 positions in a single row with a 4.14mm pitch, providing a compact and reliable interconnection solution.</p><p>&nbsp;</p><p>The housing features a latch lock fastening mechanism for secure mating and is designed for free hanging (in-line) mounting. Contacts are terminated via crimp, and the housing accepts both male and female contacts. The natural color housing is rated for an operating temperature range of -20°C to 105°C.</p>

<p>The TE Connectivity 1473005-1 is a 200-position SODIMM connector designed for DDR SDRAM memory modules. It features a surface mount, right angle mounting style with a standard top mounting feature. The connector includes board guides and latches for secure module retention. Contacts are finished with gold flash for reliable electrical performance. This connector is suitable for applications requiring compact memory expansion in computing and embedded systems. The package is designed for surface mount assembly, enabling efficient manufacturing processes.</p>

<p>The TE Connectivity 1217861-1 is a standard male quick connect tab designed for through-hole solder mounting. It features a tab width of 0.250" (6.35mm) and a tab thickness of 0.032" (0.81mm), with a tab length of 0.352" (8.94mm) and an overall length of 14.02mm (0.552").</p><p>&nbsp;</p><p>The contact is made of brass with a tin finish, providing reliable conductivity and solderability. This non-insulated terminal is suitable for applications requiring a durable, direct electrical connection.</p><p>&nbsp;</p><p>Packaged for through-hole solder termination, this component is commonly used in power distribution, automotive, and industrial control systems where quick disconnect functionality is needed.</p>

<p>The TE Connectivity 5-1437720-4 is a signal machined pin contact designed for use in circular connector systems. The contact is constructed from brass and features a gold-cobalt-nickel-phosphorus (AuCoNiP) plating with a thickness of 157.5µin (4.00µm), providing reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This contact uses a crimp termination style, which allows for secure wire attachment without soldering. It is classified as a pin (male) contact type and is suitable for signal-level applications in circular connector assemblies.</p><p>&nbsp;</p><p>The contact is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited). It is manufactured by TE Connectivity, a leading supplier of connectivity and sensor solutions.</p>

<p>The TE Connectivity 42241-2 is a standard male quick connect tab terminal designed for reliable wire-to-wire or wire-to-board connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, with a tab length of 0.620" (15.75mm). The terminal accepts 14-18 AWG wire and uses a crimp termination method for secure attachment.</p><p>&nbsp;</p><p>Constructed from brass with a tin contact finish, the 42241-2 offers good conductivity and corrosion resistance. It is a non-insulated terminal, making it suitable for applications where insulation is not required or where additional insulation can be applied separately. The free hanging (in-line) mounting style allows for flexible installation in harnesses or direct wire connections.</p><p>&nbsp;</p><p>This terminal is commonly used in power distribution, automotive, and industrial control systems where quick disconnect functionality is needed. Its compact 29.18mm overall length facilitates use in space-constrained environments.</p>

<p>The TE Connectivity 280616-1 is a rectangular connector header designed for board-to-board or cable applications. It features a shrouded 2-wall design with a detent lock fastening system for secure mating.</p><p>&nbsp;</p><p>This header has 4 positions arranged in a single row with a 3.96mm pitch. It uses male pin contacts made of brass with a tin finish. The insulation is green polycarbonate, glass filled, with a flammability rating of UL94 V-0.</p><p>&nbsp;</p><p>The component is mounted via through-hole right-angle orientation and terminated by soldering. The contact length is 10.00mm and the insulation height is 8.80mm.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring a reliable, polarized connection with a detent lock. The right-angle design allows for low-profile board-to-board connections.</p>

<p>The TE Connectivity 338068-4 is a 4 position, 2 row rectangular receptacle connector designed for board-to-board or cable applications. It features a 2.54mm pitch and row spacing, with through hole mounting and kinked pin solder termination. The connector uses forked tin plated contacts and a friction lock fastening type for secure mating. The red insulation is rated UL94 V-0 for flammability. Operating temperature range is -40°C to 105°C with a voltage rating of 100 VDC.</p>

<p>The TE Connectivity 215464-8 is a 8-position, 2-row header connector with a 2.54mm (0.100 inch) pitch. It features a through-hole mounting with a press-fit and solder termination. The contacts are male pins made of brass with a tin finish, offering good conductivity and corrosion resistance. The insulator is made of glass-filled polybutylene terephthalate (PBT) with a UL94 V-0 flammability rating, ensuring safety in various applications.</p><p>&nbsp;</p><p>This connector is fully shrouded with four walls and includes a latch lock fastening mechanism for secure mating. It is suitable for board-to-board or cable connections. Electrical ratings include a current rating of 1.5A and a voltage rating of 230V. The operating temperature range is -40°C to 105°C, making it suitable for a wide range of environments.</p><p>&nbsp;</p><p>The contact finish thickness is 3.00µm, and the contact length is 3.10mm. The insulation height is 3.60mm, and the color is red. This connector is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited). It is also REACH unaffected. Overall, the 215464-8 is a reliable and versatile header connector for various electronic applications.</p>

<p>The TE Connectivity 167021-2 is a crimp-type socket contact designed for rectangular connector systems. It accommodates wire gauges from 28 to 32 AWG, making it suitable for fine-wire applications in compact interconnect designs.</p><p>&nbsp;</p><p>The contact features a gold finish with a thickness of 31.5 microinches (0.80 micrometers), providing reliable electrical performance and corrosion resistance. The crimp termination ensures a secure mechanical and electrical connection without soldering.</p><p>&nbsp;</p><p>This component is classified as RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is intended for use in rectangular connector housings and is commonly specified in industrial, automotive, and telecommunications equipment where space and signal integrity are critical.</p>

<p>This TE Connectivity D-Sub female socket contact (part number 5-166051-1) is designed for signal applications in D-Sub connectors. It accepts 20-24 AWG wire and uses a crimp termination method. The contact is made of phosphor bronze with a gold plating of 30.0µin (0.76µm) on the mating area and a tin finish on the termination end. The contact form is stamped and includes insulation support for reliable wire retention.</p>

<p>The TE Connectivity 3-350820-2 is a fully insulated female quick disconnect terminal designed for 14-16 AWG wire. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, making it compatible with standard male quick disconnect tabs. The terminal is constructed with a brass contact and tin plating for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The fully insulated nylon housing provides electrical insulation and strain relief, while the blue color aids in wire gauge identification. The crimp termination ensures a secure mechanical and electrical connection. This terminal is free hanging (in-line) mounted, suitable for applications where a permanent connection is needed.</p><p>&nbsp;</p><p>Typical applications include automotive wiring, appliance connections, industrial control panels, and power distribution systems. The terminal's compact length of 21.72mm (0.855") allows for use in tight spaces.</p>

<p>This is a 6-position receptacle housing from TE Connectivity's UNI-MATE series. It is designed for use with male or female contacts and features a locking ramp fastening mechanism for secure mating.</p><p>&nbsp;</p><p>The housing supports panel mount snap-in installation and uses crimp termination for contacts. It has a row spacing of 6.35 mm and operates over a temperature range of -55°C to 105°C. The natural color housing is suitable for various applications.</p><p>&nbsp;</p><p>As a rectangular connector housing, it is commonly used in wire-to-wire or wire-to-board connections where a reliable and durable interface is required. The housing accommodates up to 6 positions in 2 rows.</p>

<p>This circular connector plug housing from TE Connectivity Deutsch Connectors is designed for use with female socket contacts. It accommodates 4 positions with a 2.5mm contact size and uses crimp termination. The housing features a bayonet lock fastening system for secure mating and is unshielded. Constructed from glass-filled PBT (Polybutylene Terephthalate) in a black color, it supports free hanging (in-line) mounting. Orientation keying is provided with a single key position.</p>

<p>The TE Connectivity 640900-1 is a 5-position, single-row, shrouded header from the Universal MATE-N-LOK family. It features a 6.35mm pitch and is designed for board-to-cable/wire applications. The header has male pin contacts made of phosphor bronze with a tin finish, housed in a white polyamide (nylon) insulator rated UL94 V-0.</p><p>&nbsp;</p><p>This through-hole component is rated for 12A current and 600VAC, with an operating temperature range of -40°C to 105°C. The shrouded 4-wall design and locking ramp fastening type ensure reliable mating with compatible plug housings.</p><p>&nbsp;</p><p>Ideal for power distribution in industrial, automotive, and consumer electronics, this header provides a robust and secure connection. The 3.94mm contact length and circular contact shape facilitate consistent electrical performance.</p>

<p>The TE Connectivity 3-640426-3 is a 3 position rectangular connector receptacle designed for discrete wire IDC termination. It accepts 18 AWG wire and features female socket contacts with a tin contact finish of 80.0 microinches (2.03 micrometers).</p><p>&nbsp;</p><p>The connector has a single row of contacts on a 3.96mm (0.156 inch) pitch. The housing is orange and includes a closed end feature. The fastening type is a locking ramp, providing secure mating. The mounting type is free hanging (in-line), suitable for cable-to-board or cable-to-cable applications.</p><p>&nbsp;</p><p>This connector is RoHS3 compliant and has an MSL of 1 (unlimited). It is REACH unaffected. The part is commonly used in power and signal interconnection applications where a reliable, polarized connection is required.</p>

<p>The TE Connectivity 8-338069-2 is a 12-position rectangular connector receptacle designed for board-to-board or cable applications. It features a 2.54mm (0.100") pitch with 2 rows and a row spacing of 0.100" (2.54mm). The connector uses forked tin contacts and is terminated via surface mount solder attachment.</p><p>&nbsp;</p><p>The housing is red with an insulation height of 5.30mm (0.209") and is rated UL94 V-0 for flammability. The connector includes a friction lock fastening type for secure mating and is pick-and-place compatible for automated assembly. It operates over a temperature range of -40°C to 105°C and is rated for 100VDC.</p>

<p>The TE Connectivity 640457-4 is a 4-position shrouded header connector designed for board-to-cable/wire applications. It features a single row of square male pins with a 2.54mm pitch, mounted through hole with a right angle orientation.</p><p>&nbsp;</p><p>The header is shrouded with one wall and includes a friction lock fastening type for secure mating. The insulator is made of natural thermoplastic with a UL94 V-0 flammability rating, suitable for environments from -55°C to 105°C. Copper alloy contacts are finished with tin. The part is rated for 250VAC.</p>

<p>This terminal housing is designed for use with 0.250" (6.35mm) quick connect male tabs. It has a single position and is intended for free hanging (in-line) mounting. The housing is made of natural color material. It is part of TE Connectivity's range of quick connect disconnect components. The housing accommodates male tab terminals of the specified size. It is suitable for applications requiring a reliable, insulated housing for quick connect terminations. The free hanging design allows for flexible installation without panel mounting.</p>

<p>The TE Connectivity 350767-1 is a 3-position receptacle housing designed for use with the Universal MATE-N-LOK (UNI-MATE) connector system. It accommodates male or female crimp contacts (sold separately) and features a 6.35mm pitch for reliable spacing. The housing is panel mount with snap-in retention, allowing quick installation without additional hardware. A locking ramp fastening system ensures secure mating with the corresponding plug housing.</p><p>&nbsp;</p><p>Key electrical specifications include a voltage rating of 600V and an operating temperature range of -55°C to 105°C, making it suitable for industrial environments. The natural color housing is made from a UL 94 V-0 rated material (assumed based on standard practice). The single-row design with 3 positions is ideal for low-density wire-to-wire or wire-to-board connections.</p><p>&nbsp;</p><p>This housing is a critical component in power distribution, control systems, and automation equipment. Its crimp termination offers flexibility for custom wire lengths and field installation. The panel mount snap-in feature simplifies integration into panels or enclosures.</p>

<p>The TE Connectivity 280615-2 is a 2-position, single row, right-angle header designed for board-to-board or cable applications. It features a 3.96mm pitch and uses male pin contacts made of brass with a tin finish of 14.5µin. The connector is shrouded with 2 walls and includes a detent lock fastening system for secure mating.</p><p>&nbsp;</p><p>The insulator is molded from glass-filled polycarbonate in green color, rated UL94 V-0 for flammability. Mounting is through hole, right angle, with solder termination. The contact length is 10.00mm and the insulator height is 8.80mm. All 2 positions are loaded.</p>

<p>The TE Connectivity 2106489-2 is a board-in, direct wire-to-board connector designed for reliable termination of individual wires. This connector has 2 positions in a single row, with a cable pitch of 4.00mm (0.157 inches). It uses IDC (Insulation Displacement Connection) termination, allowing for quick and efficient cable assembly without stripping wires.</p><p>&nbsp;</p><p>The connector is mounted via through hole, right angle orientation, making it suitable for applications where space is constrained and a low-profile connection is needed. The contact finish is tin, providing good conductivity and corrosion resistance. The housing is natural in color and features a closed end design, which helps protect the contacts and guide the mating cable.</p><p>&nbsp;</p><p>This component is designed for use with 18 AWG wire, and the board mounting pitch matches the cable pitch at 4.00mm. It is commonly used in industrial control, automotive, and consumer electronics where a compact and secure wire-to-board interface is required.</p>

<p>The TE Connectivity 1-480708-0 is a UNI-MATE series rectangular connector housing. It is a plug housing with 12 positions arranged in 3 rows, featuring a row spacing of 6.35mm (0.250 inches).</p><p>&nbsp;</p><p>This housing accepts both male and female crimp contacts and uses a latch lock fastening system for secure mating. It is designed for free hanging (in-line) mounting applications and is natural in color.</p><p>&nbsp;</p><p>The operating temperature range of -55°C to 105°C makes it suitable for a wide variety of industrial and commercial environments.</p>

<p>The 5-146281-1 is a single-position, vertical, breakaway PCB header from TE Connectivity's AMPMODU series. This through-hole solder-mount connector is designed for board-to-board or cable-to-board applications. It features a single row of one male square pin contact, with a mating square post dimension of 0.64 mm and an overall contact length of 11.18 mm.</p><p>&nbsp;</p><p>The contact base material is copper alloy, with a mating area plated in 0.762 µm gold over nickel underplate, and a tin termination area. The header is unshrouded with a push-pull fastening type and a black liquid crystal polymer (LCP) insulator rated UL94 V-0. It is rated for 3 A of signal current and operates over a -65°C to 105°C temperature range.</p><p>&nbsp;</p><p>This part is delivered in carton packaging of 520 units and is suitable for standard 1.6 mm thick PCBs. It holds multiple agency approvals including CSA (LR7189) and UL (E28476), with a flammability rating of UL94 V-0.</p>

<p>The TE Connectivity 967056-1 is a sealing cavity plug designed for use with the Micro Quadlok (MQS) connector series. It accommodates wire gauges from 24 to 18 AWG and fits cavities with a diameter of 3.45 mm. This accessory ensures proper sealing and protection of unused or wired cavities in the connector housing.</p><p>&nbsp;</p><p>The plug is part of TE's MQS product family and is RoHS3 compliant. It is suitable for automotive and industrial applications where reliable sealing is required. The component is a simple push-in type accessory with no termination or mounting hardware needed.</p>