TE Connectivity

<p>The TE Connectivity 1241050-5 is a 10-position, 2-row unshrouded male pin header designed for surface mount soldering. It features a 2.54mm (0.100") pitch and row spacing, making it compatible with standard 0.100" grid prototyping and production boards. The connector uses square tin-plated brass contacts with a flash thickness finish, providing reliable electrical connections for board-to-board or cable applications.</p><p>&nbsp;</p><p>The insulator is molded from black Polycyclohexylenedimethylene Terephthalate (PCT), a high-temperature thermoplastic suitable for reflow soldering processes. The header includes a pick-and-place feature for automated assembly. With a push-pull fastening type and an insulation height of 2.79mm, this connector is suited for compact designs where low profile and ease of mating are required.</p><p>&nbsp;</p><p>This part is available in tape and reel or cut tape packaging for surface mount assembly. It is RoHS3 compliant and has an MSL rating of 1 (unlimited floor life). The 1241050-5 is a breakaway style header, allowing the user to customize the number of positions if needed, though all 10 positions are loaded from the factory.</p>

<p>The TE Connectivity 350826-1 is a 4-position single row header designed for board to cable/wire applications. It features a 6.35mm (0.250") pitch and through hole solder termination. The header uses female socket contacts with a tin finish and a locking ramp fastening type for secure mating.</p><p>&nbsp;</p><p>The insulation is white with a height of 13.97mm (0.550") and is rated UL94 V-0 for flammability. The contact length is 3.94mm (0.155"). This component is suitable for power and signal interconnection in a variety of electronic assemblies.</p>

<p>The TE Connectivity 280379-1 is a single-row, 6-position header from the AMPMODU series. It features a 2.54mm pitch and a right-angle, through-hole mounting orientation for compact PCB layouts. The header is partially shrouded with a 3-wall design and includes a detent lock to ensure reliable mating retention.</p><p>&nbsp;</p><p>Electrical ratings include a 3A current capacity and 40V voltage rating, with a dielectric withstanding voltage of 750V. Contacts are tin-plated on a phosphor bronze base material (per datasheet) with a thickness of 3.00µm, providing good conductivity and corrosion resistance. The black thermoplastic housing meets UL94 V-0 flammability standards.</p><p>&nbsp;</p><p>This header is suitable for both board-to-board and wire-to-board applications in power and signal circuits. It is packaged in boxes of 1000 pieces and is RoHS compliant.</p>

<p>The TE Connectivity 350690-1 is a crimp-type pin contact designed for use in rectangular connector systems. It accommodates wire gauges from 18 to 24 AWG and features a tin contact finish for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is crimp terminated, providing a secure and durable connection suitable for a variety of wiring applications. The tin finish offers good solderability and environmental protection.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and has a moisture sensitivity level (MSL) of 1 (unlimited), indicating no special handling requirements for moisture exposure.</p>

<p>The TE Connectivity 640551-4 is a dust cap accessory designed for use with MTA-156 series rectangular connectors. It features a closed end design and accommodates 4 positions, providing protection against contaminants in the mating area.</p><p>&nbsp;</p><p>This dust cap is suitable for applications where connector protection is required. It is manufactured by TE Connectivity, a leading producer of connectivity and sensor solutions.</p><p>&nbsp;</p><p>The component is indicated as RoHS3 compliant and REACH unaffected, with an MSL of level 1 (unlimited). Please note that compliance status should be verified with official documentation.</p>

<p>The 770377-1 is a polarizing device (key, plug, post) from TE Connectivity designed for use with the Universal MATE-N-LOK series of rectangular connectors. This accessory ensures proper alignment and polarization during mating, preventing mismating and potential damage.</p><p>&nbsp;</p><p>As a keying plug, it fits into the connector housing to create a unique polarization pattern, allowing only the corresponding polarized connector half to mate. This is critical in multi-connector systems to avoid incorrect connections.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and REACH unaffected, supporting environmental compliance requirements. It is manufactured by TE Connectivity, a leading supplier of connectivity and sensor solutions.</p>

<p>This circular connector housing, TE Connectivity part number 206708-1, is a plug housing for the Series 1 CPC (Circular Plastic Connector) family. Designed for 9 signal positions using size 16 socket contacts, the housing features a glass-filled polyamide (PA66) shell rated UL94 V-0 for flammability. Key design traits include a 3/4-20 UNEF-2A thread size for mating, an A keying orientation to prevent misalignment, and threaded coupling retention. The housing is unshielded and unsealed, suitable for indoor commercial and industrial signaling applications where environmental protection is not required.</p>

<p>The TE Connectivity 1924463-3 is a rectangular connector pin contact designed for wire gauges 18 to 20 AWG. This stamped contact utilizes a crimp termination method, ensuring a reliable and secure connection to the wire. The contact is finished with tin, with a thickness of 100.0 microinches (2.54 micrometers), providing good corrosion resistance and solderability. Suitable for use in a variety of rectangular connector housings, this contact is a common choice for wire-to-wire and wire-to-board applications in industrial and automotive environments. The part is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p>

<p>The TE Connectivity 640250-6 is a rectangular connector housing designed for use with female socket contacts. It features a receptacle connector type with a locking ramp fastening mechanism for secure mating. The housing has 6 positions in a single row with a 3.96mm (0.156") pitch, making it suitable for wire-to-wire or wire-to-board applications.</p><p>&nbsp;</p><p>The housing is free hanging (in-line) and accepts crimp termination contacts. It is constructed in a natural color and supports an operating temperature range of -55°C to 105°C. This connector housing is commonly used in power and signal interconnections where a reliable and durable connection is required. The locking ramp ensures positive retention of the mating plug.</p>

<p>The TE Connectivity 1735446-4 is a 4-position, single-row, shrouded header designed for board-to-cable/wire applications. It features a 2.00mm pitch and through-hole mounting with both press-fit and solder termination options.</p><p>&nbsp;</p><p>The header uses square male pin contacts made of copper alloy with a tin finish. The natural thermoplastic insulator has a UL94 V-0 flammability rating and an insulation height of 6.07mm. A locking ramp fastening type ensures secure mating.</p><p>&nbsp;</p><p>Rated for 3A current and 250V voltage, the connector operates over a temperature range of -25°C to 85°C. The shrouded 3-wall design provides protection for the contacts during mating and unmating.</p>

<p>The TE Connectivity 41532 is a non-insulated quick connect receptacle (female) designed for 12-18 AWG wire. It features a 0.250" (6.35mm) tab width, 0.032" (0.81mm) tab thickness, and 0.305" (7.75mm) tab length. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>Termination is via crimp, ensuring a secure mechanical and electrical connection. The terminal type is an angled 90° flag design, which allows for right-angle mounting in tight spaces. It is a free hanging (in-line) connector, suitable for wire-to-wire or wire-to-tab applications.</p><p>&nbsp;</p><p>Typical applications include automotive wiring harnesses, power distribution, appliances, and industrial equipment where reliable quick disconnect connections are required. The non-insulated design is suitable for environments where insulation is not needed or where additional heat shrink or sleeving is applied.</p><p>&nbsp;</p><p>No datasheet is currently available for this part. Compliance data (RoHS, REACH, MSL) is unverified and should be confirmed with the manufacturer.</p>

<p>The TE Connectivity 626063 is a connector housing designed for use with 0.110" (2.79mm) quick connect terminals. It is a single-position housing with male tab configuration, suitable for free hanging (in-line) mounting. The housing is molded in natural color and accommodates male tab terminals of size 0.110" (2.79mm). This housing provides insulation and protection for quick disconnect connections in various applications. It is commonly used in automotive, appliance, and industrial equipment where reliable and easy-to-disconnect connections are required. The free hanging mounting allows for flexible routing and installation without panel mounting.</p>

<p>The TE Connectivity 2-5050871-3 is a pin receptacle socket designed for reliable interconnection in printed circuit board assemblies. It accepts pin diameters ranging from 0.056" to 0.065" (1.42mm to 1.65mm), making it suitable for a variety of pin connector systems.</p><p>&nbsp;</p><p>The contact is made from beryllium copper with a gold finish of 0.76µm (30µin) thickness, ensuring excellent conductivity and corrosion resistance. The socket features a solder termination with no tail design, and a socket depth of 6.99mm (0.275") for secure pin retention.</p><p>&nbsp;</p><p>Mechanical dimensions include an overall length of 7.32mm (0.288"), a flange diameter of 3.00mm (0.118"), and a recommended mounting hole diameter of 0.101" to 0.103" (2.57mm to 2.62mm). The part is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited).</p>

<p>The TE Connectivity 144095-2 is a rectangular connector housing designed for reliable wire-to-board or wire-to-wire connections. It features 6 positions arranged in 2 rows with a 2.54mm pitch, providing a compact footprint for space-constrained applications. The housing is panel mount with a locking ramp fastening type, ensuring secure mating. It accepts female socket contacts with crimp termination, allowing for easy field installation. The operating temperature range is -65°C to 105°C, making it suitable for harsh environments. The housing is black and RoHS3 compliant. This connector housing is commonly used in industrial, automotive, and consumer electronics where a robust and cost-effective interconnect solution is required.</p>

<p>The TE Connectivity 1-163038-0 is a rectangular connector housing designed for reliable wire-to-board connections. It features a 3 position single row plug configuration with female socket contacts. The housing is panel mounted using a snap-in mechanism and accommodates crimp type contact terminations. It is constructed with a natural color finish. The operating temperature range is from -55°C to 105°C. This housing is intended for use with matching headers or receptacles in a variety of signal and low power applications.</p>

<p>The TE Connectivity 1-66359-4 is a stamped pin contact designed for use in multi-purpose connector systems. It accommodates 14-18 AWG wire and features a brass contact material with a tin plating finish. The contact finish thickness is 50.0µin (1.27µm).</p><p>&nbsp;</p><p>This contact uses a crimp termination method, providing a reliable and secure connection. It is suitable for a variety of interconnect applications where a durable and cost-effective pin contact is required.</p><p>&nbsp;</p><p>The part is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is available in tape and reel packaging for automated assembly processes.</p>

<p>The TE Connectivity 1318917-1 is a rectangular connector housing designed for wire-to-wire applications. It features a plug configuration with 24 positions arranged in 2 rows at a 2.20mm pitch, with a row spacing of 3.00mm. The housing accommodates female socket contacts and uses crimp termination for secure wire attachment. The free hanging (in-line) mounting type allows for flexible placement in cable assemblies.</p><p>&nbsp;</p><p>The housing is made from natural color material and includes a locking ramp fastening mechanism to ensure a reliable connection. It operates over a temperature range of -30°C to 105°C, suitable for many industrial environments. The design supports high-density interconnects where space is limited.</p>

<p>The TE Connectivity 9-160583-5 is a 250 PIDG FASTON quick disconnect receptacle designed for reliable wire-to-tab connections. It accepts 15.5-22 AWG wire and features a 0.250" (6.35mm) tab width with 0.032" (0.81mm) thickness. The contact is made of phosphor bronze with a tin finish, ensuring good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This female receptacle uses a crimp termination and is free hanging (in-line) mounted. The non-mating end is insulated, and the red insulation provides visual wire size identification. The overall length is 22.20mm (0.874").</p><p>&nbsp;</p><p>Typical applications include power distribution, automotive wiring, and industrial control panels where quick and secure connections are needed. The part is RoHS, REACH, and ELV compliant, and is halogen-free with low halogen content.</p>

<p>The TE Connectivity 3-520408-2 is a fully insulated female quick disconnect terminal designed for 14-16 AWG wire. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, making it compatible with standard 0.250" male quick disconnect tabs. The terminal uses a crimp termination method and is constructed from tin-plated brass for reliable electrical conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The fully insulated nylon housing provides protection against accidental short circuits and simplifies installation by eliminating the need for separate heat shrink or tape. The blue color indicates the 14-16 AWG wire range, following industry-standard color coding for quick identification. With an overall length of 21.72mm (0.855"), this terminal is suitable for a wide range of power and signal interconnection applications in automotive, industrial, and consumer electronics.</p>

<p>The TE Connectivity 3-640441-4 is a 4-position rectangular connector receptacle designed for free hanging (in-line) right-angle mounting. It features a single row of female socket contacts with a 2.54mm pitch, making it suitable for discrete or ribbon cable applications.</p><p>&nbsp;</p><p>The connector uses IDC (Insulation Displacement Connection) termination for 24 AWG wire, providing a reliable and quick cable assembly process. The contacts are finished with 80.0µin (2.03µm) of tin, offering good solderability and corrosion resistance. A locking ramp fastening mechanism ensures secure mating with the corresponding header.</p><p>&nbsp;</p><p>The housing is white and features a closed end design. This connector is RoHS3 compliant and has an MSL of 1 (unlimited). It is commonly used in internal wiring harnesses and board-to-wire connections where a compact, reliable interconnect is required.</p>

<p>The TE Connectivity 1-881545-1 is a shunt jumper designed for use in rectangular connector systems. This open-top shunt features 2 positions arranged in a single row with a 2.54mm pitch. It is rated for a continuous current of 3A. The housing is made of black thermoplastic, glass-filled material with a UL94 V-0 flammability rating, ensuring reliability in various environments. Contacts are gold-plated with a thickness of 0.38µm, providing excellent conductivity and corrosion resistance. The female socket design allows for easy insertion and removal on header pins. This component is commonly used in applications requiring selective bridging of two adjacent pins, such as configuration settings, address selection, or enabling functions on circuit boards.</p>

<p>The TE Connectivity 165034 is a circular ring connector designed for wire gauges 10-12 AWG. It features a 1/4 stud size and is insulated for safety. The connector uses a crimp termination method and is made from tin plated copper for reliable conductivity. It is a free hanging (in-line) mounting type, suitable for various electrical connections. The serrated termination ensures secure wire grip. With a length of 30.18mm, width of 12.70mm, and thickness of 1.07mm, this connector is compact and durable. The yellow color indicates insulation type. This component is RoHS3 compliant and has an MSL of 1 (unlimited). It is commonly used in automotive, industrial, and general wiring applications where reliable ring terminals are required.</p>

<p>The TE Connectivity 1-1375820-5 is a rectangular connector housing designed for use with female socket crimp contacts. It is a receptacle style housing with 15 positions arranged in a single row on a 2.54mm pitch. The housing is white and features a locking ramp fastening mechanism for secure mating with corresponding header connectors.</p><p>&nbsp;</p><p>This housing is intended for free hanging (in-line) mounting, making it suitable for wire-to-wire connections where a panel mount is not required. Contact termination is crimp, allowing for flexible wire assembly. The operating temperature range is -55°C to 105°C, suitable for a wide range of environments.</p><p>&nbsp;</p><p>As a housing only, it does not include contacts. Separate female socket contacts must be ordered and crimped onto wires before insertion. The pitch and single row configuration make it suitable for compact, low-profile interconnect applications.</p>

<p>The TE Connectivity 3-382568-2 is a 32-position DIP IC socket designed for through-hole mounting. It features a 0.6 inch (15.24mm) row spacing and a 2.54mm (0.100 inch) pitch, accommodating standard DIP packages. The socket uses a closed frame design and tin-plated phosphor bronze contacts for reliable electrical connections. The housing is made of glass-filled thermoplastic, providing durability and insulation. This socket is suitable for applications requiring a 32-pin DIP interface, such as prototyping, programming, or production where a removable IC is needed.</p>

<p>This TE Connectivity MODU II header (part number 280389-2) is an 8-position, 2-row, right angle shrouded header designed for board-to-board or cable applications. The connector features a 2.54mm (0.100") pitch and 2.54mm row spacing, with all 8 positions loaded.</p><p>&nbsp;</p><p>Rated at 3A and 40V, the header uses brass male pins with a 15.0µin tin contact finish and a square contact shape. The black thermoplastic insulator has a 7.00mm insulation height and carries a UL94 V-0 flammability rating. The through-hole mounting with solder termination is suitable for wave soldering up to 265°C.</p><p>&nbsp;</p><p>A detent lock fastening type provides secure mating, and the 3-wall shrouding protects the contacts. The operating temperature range covers -40°C to 80°C, making the part suitable for many industrial and consumer electronic applications.</p>

<p>The TE Connectivity 292161-8 is a rectangular header connector from the CT series. It features 8 positions in a single row with a 2.00mm (0.079in) pitch. The connector is through-hole mounted with kinked pin solder termination. The shrouded - 3 wall design includes a detent lock fastening type for secure mating. Contact length is 4.50mm mating, 3.20mm post, and 9.40mm overall. Insulation height is 6.80mm. Contacts are square-shaped, made of brass with a tin finish on both mating and post ends. The insulation material is Polyamide (PA66) Nylon 6/6 in natural color, with a UL94 V-0 flammability rating. Voltage rating is 125VAC. Current rating varies by wire gauge. This connector is designed for board-to-cable/wire applications.</p>

<p>The TE Connectivity 3-640441-6 is a 6 position rectangular receptacle connector designed for IDC (Insulation Displacement Connection) termination, supporting either discrete or ribbon cable with 24 AWG wire gauge. The connector uses a 2.54mm (0.100") pitch between contacts and is arranged in a single row of female socket contacts with a tin finish (80.0µin / 2.03µm thickness).</p><p>&nbsp;</p><p>This connector is configured for free hanging (in-line) mounting at a right angle, making it suitable for cable-to-board or cable-to-cable connections where space is constrained. The housing features a locking ramp fastening type to ensure secure mating, and includes a closed end design to prevent contact damage.</p><p>&nbsp;</p><p>The connector body is white and uses IDC termination, which allows for fast, reliable wire attachment without stripping or soldering. It is designed for use in a variety of electronic interconnection applications within the rated wire gauge specification.</p>

<p>This TE Connectivity 292132-2 is a 2-position, single-row shrouded header with male pin contacts, designed for board-to-cable/wire connections. The connector features a 2.00mm pitch and a through-hole mounting style with kinked pin solder termination.</p><p>&nbsp;</p><p>The header has a 4-wall shroud with a detent lock fastening system for secure mating. The insulation is natural-colored polyamide (PA66/Nylon 6/6) with a UL94 V-0 flammability rating. Contacts are circular brass with a tin finish. Overall contact length is 9.09mm, with a mating height of 6.80mm.</p>

<p>The TE Connectivity 925714-1 is a stamped crimp socket contact designed for rectangular connector systems. It accommodates wire gauges from 14 to 20 AWG and uses a crimp termination style for secure wire attachment. The contact features a tin finish for good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This socket contact is supplied in tape and reel packaging for automated assembly, and also available in cut tape quantities. It is RoHS3 compliant and has an MSL of 1 (unlimited) for moisture sensitivity.</p><p>&nbsp;</p><p>Typical applications include wire-to-wire and wire-to-board connections in industrial, automotive, and consumer electronics where reliable signal or power transmission is required.</p>

<p>The TE Connectivity 1-1375820-6 is a rectangular connector receptacle housing designed for reliable wire-to-wire or wire-to-board connections in a wide range of electronic assemblies.</p><p>&nbsp;</p><p>This housing accommodates 16 female socket contacts on a single row with a 2.54mm pitch, providing a compact yet robust interface. The locking ramp fastening mechanism ensures secure mating retention, while the white thermoplastic body offers clear visual identification.</p><p>&nbsp;</p><p>Operating temperature from -55°C to 105°C supports use in demanding industrial and automotive environments. The free hanging (in-line) mounting style with crimp termination simplifies assembly and field service.</p>

<p>This TE Connectivity D-Sub housing plug (part number 167292-1) is designed for use with male contacts in signal applications. It features 9 positions arranged in 2 rows and conforms to shell size DE (1). The housing is intended for free hanging (in-line) mounting, making it suitable for cable-to-cable or cable-to-panel connections where a robust and reliable interface is required.</p><p>&nbsp;</p><p>The shell is constructed from steel with a tin-plated finish, providing good durability and corrosion resistance. The flange feature is housing/shell unthreaded, simplifying assembly in applications that do not require a locking mechanism. This housing is part of the D-Sub connector family, widely used in computing, telecommunications, and industrial equipment for data and signal transmission.</p>

<p>The TE Connectivity 35108 is a circular ring terminal designed for reliable wire termination in electrical and electronic assemblies. It accepts 10-12 AWG wire and fits a #8 stud, making it suitable for a variety of power and signal connections.</p><p>&nbsp;</p><p>This terminal features a crimp termination for secure, gas-tight connections and is fully insulated with a yellow color-coded housing for easy wire gauge identification. The contact is made of tin-plated copper, offering good conductivity and corrosion resistance. The serrated termination design enhances grip on the conductor for improved pull-out strength.</p><p>&nbsp;</p><p>With a length of 27.51mm (1.083 inches), a width of 9.53mm (0.375 inches), and a thickness of 1.02mm (0.040 inches), the 35108 is a compact, free-hanging (in-line) component suitable for use in control panels, junction boxes, and other equipment where reliable ring terminal connections are required.</p>

<p>The 6130-223-19149D is a circular connector assembly manufactured by TE Connectivity Deutsch Connectors. This component is designed for use in connector and interconnect applications requiring reliable circular mating interfaces.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and has a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no special moisture handling requirements. It is also REACH unaffected.</p><p>&nbsp;</p><p>As a circular connector assembly, it is suitable for various industrial and commercial applications where secure and durable connections are needed. The component belongs to the Circular Connector Assemblies subcategory within Connectors, Interconnects.</p>

<p>The TE Connectivity 320560 is a PIDG (Pre-Insulated Diamond Grip) ring terminal designed for reliable performance in high-vibration environments. Its blue nylon insulation is color-coded for 14-16 AWG wire, simplifying terminal identification and ensuring correct crimp tool selection.</p><p>&nbsp;</p><p>Key specifications include a 14-16 AWG wire gauge, #8 stud size, and crimp termination. The terminal body is made of copper per ASTM B-152 with tin plating per ASTM B-545, providing excellent corrosion resistance. The copper sleeve crimps to the wire insulation for added vibration support, while inner serrations in the barrel maximize electrical contact and tensile strength. Operating temperature is rated up to 105°C with a maximum voltage of 300V.</p><p>&nbsp;</p><p>Design features include a serrated termination for secure connections, UL 94V-2 rated nylon insulation, and compliance with SAE AS7928, Type II, Class 1. Typical applications include instruments, control panels, lighting, power supplies, transportation, and motor circuits. The terminal is free hanging (in-line) with dimensions of 21.82mm length, 8.71mm width, and 0.79mm thickness.</p><p>&nbsp;</p><p>Compliance data shows RoHS3 status (unverified) and REACH unaffected (conflicting sources). Verify with manufacturer before use in regulated applications. Datasheet and packaging details are not fully available; standard package quantity is a placeholder and should be confirmed with distributor.</p>