TE Connectivity

<p>The TE Connectivity 206036-4 is a circular connector housing designed for use as a receptacle. It accommodates 16 male crimp contacts with contact size 16, making it suitable for multi-pin connections in various applications.</p><p>&nbsp;</p><p>The housing is constructed from polyamide (PA) nylon with a black finish and has a flammability rating of UL94 V-0. It features a panel mount with a flange mounting feature and a threaded fastening mechanism for secure mating. The shell size is 17-16 with orientation A.</p><p>&nbsp;</p><p>This component is environment resistant and unshielded. It is designed for use with crimp contacts, providing flexibility in wiring configurations for industrial and commercial equipment.</p>

<p>This heat shrink tubing is a flexible, black polyolefin (PO) tubing designed for insulation and protection of wires and components. It features a 2:1 shrink ratio, shrinking to half its supplied diameter when heated to 95°C. The tubing has a pre-shrink inner diameter of 0.031 inches (0.79 mm) and a recovered wall thickness of 0.017 inches (0.43 mm).</p><p>&nbsp;</p><p>The irradiated polyolefin material provides good electrical insulation and mechanical protection. The tubing operates over a temperature range of -55°C to 135°C, making it suitable for a variety of environments. Storage conditions are recommended between 32°F and 95°F (0°C to 35°C).</p><p>&nbsp;</p><p>Typical applications include insulating wire splices, providing strain relief, and bundling small wires in automotive, industrial, and consumer electronics assemblies. The tubing is supplied in a flexible form and can be cut to length as needed.</p>

<p>The TE Connectivity 163083-7 is a stamped socket contact intended for use in multi-purpose connector systems. It is manufactured from brass with a gold contact finish (31.5µin / 0.80µm) for reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This contact accommodates 16-18 AWG wire and uses a crimp termination style, making it suitable for field-installable or production wire harness applications. The socket design ensures secure mating with corresponding pin contacts.</p><p>&nbsp;</p><p>As a crimp-type contact, it is commonly used in industrial, automotive, and commercial interconnect applications where consistent contact force and durability are required.</p>

<p>The TE Connectivity 160298 is a circular ring terminal designed for reliable wire termination in electrical and electronic applications. It accepts 10-12 AWG wire and fits a #5/16 stud, making it suitable for medium-duty power connections. The terminal uses a crimp termination style and is fully insulated, providing protection against short circuits and environmental exposure. The contact is made of tin-plated copper, offering good conductivity and corrosion resistance. A serrated termination feature enhances grip on the wire for a secure mechanical and electrical connection. The terminal is yellow in color, which is standard for 10-12 AWG insulated ring terminals. It is a free-hanging (in-line) mounting type, allowing for easy installation in wire harnesses and panel assemblies. The dimensions include a thickness of 0.84 mm, width of 12.70 mm, and length of 30.20 mm. This part is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 41333 is a non-insulated circular ring terminal designed for 14 to 18 AWG wire. It features a #10 stud size and is terminated via crimping. The terminal is made of brass with a tin-plated finish, offering good conductivity and corrosion resistance. It is a free-hanging (in-line) mounting type, suitable for wire-to-stud connections. Dimensions include a thickness of 0.51mm (0.020"), width of 7.52mm (0.296"), and length of 16.26mm (0.640"). This terminal is RoHS3 and REACH compliant, and has an MSL of 1 (unlimited). It is commonly used in power distribution and grounding applications where a secure, reliable connection is required.</p>

<p>The TE Connectivity 160927-4 is a non-insulated quick disconnect receptacle designed for reliable wire connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, ensuring compatibility with standard mating tabs. The connector accepts wire gauges from 13.5 to 17 AWG and uses a crimp termination for secure, vibration-resistant connections.</p><p>&nbsp;</p><p>Constructed with phosphor bronze contacts and a tin finish, the 160927-4 offers good conductivity and corrosion resistance. The free hanging (in-line) mounting style provides flexibility for routing in harness assemblies. With an overall length of 19.20mm (0.756"), it is compact for space-constrained applications.</p><p>&nbsp;</p><p>This female terminal is part of TE's standard terminal family and is suitable for a variety of electrical and electronic interconnection needs. The non-insulated design allows for close spacing in multi-circuit connectors.</p>

<p>The TE Connectivity 880642-2 is a ring tongue terminal designed for reliable wire termination. It accepts 13-17 AWG wire and features a circular terminal type with a crimp termination style. The contact is made of brass with a tin plating, providing good conductivity and corrosion resistance. This non-insulated terminal measures 19.81mm in overall length, 8.10mm in overall width, and 0.61mm thick. It is suitable for free hanging (in-line) mounting applications. The terminal is packaged in tape and reel format. The part is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited). It is also REACH unaffected.</p>

<p>The TE Connectivity 170376-1 is a rectangular connector contact designed for use with 20 to 26 AWG wire. This pin contact features a crimp termination style and a tin contact finish, ensuring reliable electrical connections in a wide range of applications.</p><p>&nbsp;</p><p>As a pin contact, it is suitable for insertion into rectangular connector housings and can be used in both signal and power applications within its wire range. The tin finish provides good solderability and resistance to corrosion.</p><p>&nbsp;</p><p>This contact is compliant with RoHS3 and REACH unaffected directives, making it suitable for use in products requiring environmental compliance. The part is commonly used in industrial, automotive, and consumer electronics where rectangular wire-to-wire or wire-to-board connections are needed.</p>

<p>The TE Connectivity 1-794606-2 is a crimp socket contact designed for use in Micro MATE-N-LOK connector systems. It accepts 20-24 AWG wire with an insulation diameter range of 0.89 to 1.524 mm. The contact features a stamped phosphor bronze base with a gold finish of 0.76 µm minimum thickness in the mating area, ensuring reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is terminated via crimping, providing a secure mechanical and electrical connection. The gold stripe area is plated with either 0.76 µm min. gold or a gold flash over palladium nickel, while the crimp area is bright tin over nickel. The contact is RoHS3 compliant and has an MSL of Level 1 (unlimited).</p><p>&nbsp;</p><p>Designed for snap-in retention in connector housings, this contact is suitable for various wire-to-wire and wire-to-board applications. The phosphor bronze material offers good spring properties and durability. Note that the datasheet is a customer drawing and full specifications such as current rating and operating temperature are not provided in the available documentation.</p>

<p>The TE Connectivity 640663-1 is a wire to board terminal designed for 22-26 AWG wire. It features a phosphor bronze contact with a tin-lead finish. The terminal has a through board locking design and is intended for through hole mounting with solder termination. It has a length of 6.35mm (0.250 inches) and accommodates an insulation diameter of 0.040" to 0.070" (1.02mm to 1.78mm). The hole diameter is 0.055" (1.40mm). This terminal is suitable for wire-to-board connections in various electronic assemblies.</p>

<p>The 826926-3 is a 3-position, single row, unshrouded male pin header from the TE Connectivity AMPMODU II series. It features a 2.54mm pitch and through hole mounting with solder termination. The header is designed for board-to-board or cable applications.</p><p>&nbsp;</p><p>The contacts are made of copper alloy with a tin finish (2.00µm thickness) and the insulator is green polybutylene terephthalate (PBT) with a UL94 V-0 flammability rating. The operating temperature range is -65°C to 105°C and the current rating is 5A.</p><p>&nbsp;</p><p>The overall contact length is 12.70mm with a mating pin length of 6.70mm and an insulation height of 2.79mm. The push-pull fastening type ensures secure connections.</p>

<p>The TE Connectivity 1-215460-0 is a 10-position, 2-row receptacle from the Micro-MaTch series. It features a 1.27mm staggered contact pitch with 2.54mm row spacing, designed for through-hole right-angle mounting. Contacts are made of phosphor bronze with tin plating over nickel underplating, and the housing is glass-filled PBT (red) with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This connector supports board-to-board or cable-to-board applications with a push-pull fastening type. The operating temperature range is -40°C to 105°C, and the voltage rating is 100VDC. Termination is via kinked pin solder, providing secure retention.</p><p>&nbsp;</p><p>Packaging options include box packaging (250 connectors per box) and tape and reel (2500 connectors per reel). The part is RoHS3 and REACH compliant (unverified) with MSL 1 (unlimited).</p>

<p>The TE Connectivity 1375820-9 is a 9-position, single-row rectangular connector housing designed for wire-to-board or wire-to-wire applications. It features a 2.54mm pitch and a locking ramp fastening type for secure mating. The housing is free hanging (in-line) and accepts female socket contacts with crimp termination.</p><p>&nbsp;</p><p>The housing is made of white thermoplastic and operates over a temperature range of -55°C to 105°C. It is suitable for use in a variety of industrial, automotive, and consumer electronics applications where reliable connections are required. The compact 1-row design saves space on the PCB or in cable assemblies.</p><p>&nbsp;</p><p>This housing is part of TE Connectivity's rectangular connector family and requires separate contacts (not included) for full assembly. The crimp termination allows for easy field installation and repair. No electrical ratings are specified for the housing itself; those depend on the chosen contacts.</p>

<p>The TE Connectivity 292161-6 is a 6-position, single-row, 2mm pitch header designed for wire-to-board applications. It is part of the AMP CT series and features a through-hole mounting style with kinked pin solder termination. The connector is partially shrouded and has a detent lock for mating retention. The contacts are male pins made of brass with tin plating, rated for a current of 4A and a voltage of 125VAC. The insulation is made of polyamide (PA66) in natural color, with a height of 6.80mm. The contact mating area plating thickness is 1-2 µm. The connector accepts wire sizes 28-22 AWG. It is RoHS and ELV compliant. The product is typically used in wire-to-board connections in various electronic devices.</p>

<p>The TE Connectivity 1-163085-1 is a stamped pin contact from the Type III+ series, designed for 24-20 AWG wire (0.20-0.50 mm²). It features a brass body with a 0.76µm gold plating on the mating zone, ensuring reliable electrical performance in controlled environment applications per TE product specification 108-10042. The contact uses a crimp termination method and accommodates insulation diameters from 1.1 to 1.8 mm. Supplied loose piece with a cut length of 27.6 mm max or in tape and reel packaging (5000 pcs/reel) with a yellow color code. This contact is suitable for multi-purpose interconnect applications where a durable, stamped pin is required.</p>

<p>The TE Connectivity 215464-6 is a 6-position, 2-row shrouded header designed for board-to-board or cable applications. It features a 2.54mm pitch and row spacing, male pin contacts with tin finish, and a glass-filled PBT insulator in red. The connector offers a latch lock fastening system for secure mating and supports both press-fit and solder termination.</p><p>&nbsp;</p><p>With a current rating of 1.5A and voltage rating of 230V, it is suitable for low-power signal and power interconnections. The operating temperature range of -40°C to 105°C allows use in a variety of environments. The insulator meets UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The through-hole mounting style and shrouded 4-wall design provide robust mechanical retention and pin protection. It is RoHS3, REACH, and MSL 1 compliant (unverified). Ideal for use in industrial controls, test equipment, and consumer electronics requiring compact, reliable connectors.</p>

<p>The TE Connectivity 1217057-1 is a non-insulated male quick connect tab terminal designed for reliable solder connections. The part features a brass contact with a tin finish, ensuring good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The terminal has a tab width of 0.187" (4.75mm) and a tab thickness of 0.032" (0.81mm). It is configured for through-hole mounting with solder termination. The overall length is 12.37mm (0.487").</p><p>&nbsp;</p><p>This quick connect tab is suitable for applications requiring a standard male tab interface for power or signal distribution, particularly where non-insulated terminations are acceptable.</p>

<p>This is a ring terminal from TE Connectivity designed for 20 AWG wire. It features a circular terminal type with a #6 stud size, making it suitable for securing wires to studs. The terminal is insulated with a red and red stripe color, and has a crimp termination style. The contact is made of copper with a tin finish for good conductivity. The terminal has a length of 21.44mm, width of 6.35mm, and thickness of 0.79mm. It features insulation restriction. The mounting type is free hanging (in-line). This terminal is commonly used in power distribution and signal connections. The RoHS compliance is unverified, so verification is recommended.</p>

<p>The TE Connectivity 34855 is an insulated ring terminal designed for reliable wire termination in industrial and electrical applications. It accommodates 10-12 AWG wire and fits a #1/4 stud, making it suitable for power distribution and control systems.</p><p>&nbsp;</p><p>The terminal features a circular barrel shape with a tin-plated copper contact that provides good conductivity and corrosion resistance. The yellow insulation color indicates the wire range. Its serrated termination design enhances grip on the conductor during crimping, ensuring a mechanically secure and electrically stable joint. The free-hanging (in-line) mounting style allows for easy installation without additional hardware.</p>

<p>The TE Connectivity 175150-2 is a power tab contact designed for use with 16-20 AWG wire. It features a crimp termination style and a tin contact finish, providing reliable electrical connections in power applications. This contact is part of TE's rectangular connector contact family, suitable for various interconnect solutions. The tab design ensures secure mating with corresponding socket contacts.</p>

<p>The 280385-2 is a PCB mount header from TE Connectivity's AMPMODU series. It features 16 positions arranged in 2 rows with a 2.54mm pitch and row spacing. The header is partially shrouded and mounts vertically to the PCB using through hole solder termination.</p><p>&nbsp;</p><p>The contacts are made of brass with a gold plating on the mating area and a tin plating on the termination area. The header is rated for 3A of current and 40V of voltage, suitable for power and signal applications. The insulation material is black thermoplastic rated UL94 V-0, and the operating temperature range is -65 to 105 °C.</p><p>&nbsp;</p><p>This header is designed for board-to-board or cable applications. It includes a detent lock fastening type for secure mating. The overall contact length is 14.30mm with a termination post length of 3.5mm. The insulation height is 12.60mm.</p>