TE Connectivity

<p>The TE Connectivity 280708-2 is a crimp socket contact from the AMPMODU II COSI series, designed for reliable wire-to-board connections. It accepts 22-26 AWG wire and uses a crimp termination for a secure mechanical and electrical bond.</p><p>&nbsp;</p><p>The contact features a tin finish with a thickness of 31.5 microinches (0.80 micrometers), providing good conductivity and corrosion resistance. As a socket contact, it mates with corresponding pin contacts in rectangular connector housings.</p><p>&nbsp;</p><p>This part is RoHS3 compliant, MSL Level 1 (unlimited floor life), and REACH unaffected, though these compliance statuses are unverified. It is commonly used in automotive, industrial, and consumer electronics applications where compact and reliable interconnect solutions are required.</p>

<p>This TE Connectivity 928999-1 socket contact is designed for use in rectangular connectors, specifically the MQS (Micro Quadlok) system. It features a crimp termination suitable for 20-24 AWG wires (0.25-0.35 mm²). The contact is made of copper alloy with a tin finish, providing reliable conductivity and corrosion resistance. Overall length is 13.7 mm, and weight is 0.11 g per piece. The contact is RoHS3 compliant, MSL 1 (unlimited), and REACH unaffected. It is available in cut tape and tape and reel packaging from distributors.</p>

<p>The TE Connectivity 280702-1 is a socket contact from the AMPMODU MOD 1 series, designed for crimp termination to 18-22 AWG wire (0.3-0.9 mm²). The contact is made of phosphor bronze with a tin plating thickness of 0.8 µm (31.5 µin). It supports wire insulation diameters from 1.8 to 2.3 mm and includes wire insulation support.</p><p>&nbsp;</p><p>This contact is rated for a maximum current of 5 A and is intended for signal circuit applications. It operates over a temperature range of -40 to 105 °C. The contact orientation is straight, and it does not include PCB mount retention.</p><p>&nbsp;</p><p>The 280702-1 is supplied in tape and reel packaging with a quantity of 5000. It is compliant with EU RoHS Directive 2011/65/EU and does not contain REACH SVHC substances. The part is classified as low halogen with Br, Cl, F, I each below 900 ppm and is BFR/CFR/PVC free.</p>

<p>The 350536-1 is a socket contact from TE Connectivity's Universal MATE-N-LOK connector series, designed for use in plug and cap housings. It accommodates 14-20 AWG wire with an insulation diameter range of 0.060 to 0.130 inches (1.52 to 3.30 mm). The contact features a crimp termination and is made of brass with a pre-tin finish, providing reliable conductivity and corrosion resistance. The contact length is 20.06 mm (0.790 in) with a stock thickness of 0.254 mm (0.010 in). This loose piece (bulk) packaging is suitable for low-volume assembly or prototyping. The contact is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 350218-1 is a pin contact from the Universal MATE-N-LOK series, designed for use with 6.35 mm pitch rectangular connector housings. It accepts 14-20 AWG wire and is terminated by crimping. The contact is finished with tin and is rated for a maximum current of 19 A at 600 VAC.</p><p>&nbsp;</p><p>This contact is suitable for applications requiring reliable power and signal connections in industrial machinery, household appliances, HVAC equipment, and commercial building equipment. The Universal MATE-N-LOK system offers polarized housings and positive locking latches for secure mating.</p><p>&nbsp;</p><p>The contact is supplied in tape and reel packaging for automated assembly. It is compatible with TE Connectivity Universal MATE-N-LOK plug and receptacle housings, including those with terminal position assurance (TPA) devices.</p>

<p>TE Connectivity 1987500-1 is a magnetic wire connector designed for wire-to-board connections. It uses an IDC (Insulation Displacement Connection) terminal to terminate 26-30 AWG wires without stripping. The termination style is PCB post, allowing direct soldering to a printed circuit board. The connector is of style 187, which refers to the tab size. It is available in Tape &amp; Reel packaging for automated assembly. The part is RoHS3 compliant, REACH unaffected, and has MSL 1 Unlimited. It is suitable for applications such as transformers, motors, and coils where magnetic wire connections are required.</p>

<p>The TE Connectivity 828904-1 is a Single Wire Seal (SWS) designed for use with MCP series connectors. Constructed from blue silicone, this seal provides a robust barrier against moisture and contaminants in automotive and industrial applications.</p><p>&nbsp;</p><p>Key specifications include a cavity diameter of 5.2 mm and an acceptance range for cable insulation diameter of 2.1 mm. The seal has a Shore A hardness of 50 and contains a built-in lubricant to ease assembly. It offers poor resistance to hydrocarbons and carries no UL flammability rating.</p><p>&nbsp;</p><p>The 828904-1 is RoHS, REACH, ELV, and China RoHS compliant, and is halogen-free. It is designed for operating temperatures from -40 to 130 °C, making it suitable for harsh underhood environments.</p>

<p>The 6130-223-11149D is a circular connector assembly manufactured by TE Connectivity Deutsch Connectors, a well-known producer of high-reliability interconnect solutions. The component is RoHS3 compliant, REACH unaffected, and has a moisture sensitivity level of 1 (unlimited), indicating no special moisture handling requirements. It is categorized under Circular Connector Assemblies, which are commonly used in applications requiring robust and secure connections. This part is identified by the part number 6130-223-11149D.</p>

<p>The TE Connectivity 5-160432-4 is a FASTON 250 series non-insulated quick disconnect receptacle designed for reliable wire-to-tab connections. It features a 0.250" (6.35mm) mating tab width and 0.032" (0.81mm) tab thickness, compatible with standard FASTON 250 tabs. The receptacle accepts wire sizes from 15.5 to 20 AWG (0.51 – 1.65 mm²) and supports wire insulation diameters up to 2.3 – 3.3 mm. The contact is made of tin-plated brass with an open barrel F-crimp design, ensuring secure mechanical and electrical termination. It includes wire insulation support for added strain relief. The dimple mating retention type provides an extraction force of 80 N, ensuring a stable connection in vibration-prone environments. The operating temperature range is -40°C to 110°C, making it suitable for automotive, industrial, and consumer applications. The terminal is non-insulated and free-hanging (in-line) mounted. It is packaged in strip/reel form with a standard quantity of 7,000 pieces per reel. The component is RoHS, REACH, ELV, and China RoHS compliant, and is halogen-free.</p>

<p>The TE Connectivity 1534681-1 is an insulation displacement connector (IDC) terminal designed for magnetic wire applications. It accepts wire gauges from 26 to 30 AWG, making it suitable for fine wire connections in compact electronic assemblies. The termination style is a PCB post, allowing direct soldering into a printed circuit board.</p><p>&nbsp;</p><p>This connector employs an IDC terminal type, which enables quick and reliable termination without the need for stripping or soldering the wire. The style is 187, indicating a standard tab size commonly used in quick-connect applications. The connector is designed for PCB mounting, providing a secure mechanical and electrical connection.</p><p>&nbsp;</p><p>The component is marked as RoHS3 compliant and REACH unaffected, though these compliance statuses have not been independently verified. The moisture sensitivity level is MSL 1 (Unlimited), indicating no special moisture handling requirements for storage before soldering.</p>

<p>The TE Connectivity 353907-1 is a crimp-type socket contact from the AMP Mini CT series, designed for signal-level wire-to-board, wire-to-panel, and wire-to-wire connections. It accepts 24-28 AWG discrete wire with an insulation diameter range of 0.85-1.05 mm and a wire size of 0.08-0.2 mm².</p><p>&nbsp;</p><p>The contact is made from phosphor bronze with a pre-tin (tin) plating on the mating area, 0.2 µm thick. It mates with a 0.5 mm square post and is rated for 2 A maximum current and 50 VAC operating voltage. Insulation resistance is 500 MΩ, and the operating temperature range is -30 to 105 °C.</p><p>&nbsp;</p><p>This contact is non-sealable and intended for signal circuit applications. It is terminated by crimping and mounts in a cable mount (free-hanging) configuration. The part is supplied in strip packaging with 15,000 pieces per strip.</p>

<p>The TE Connectivity 166500-2 is a signal socket contact designed for backplane connector applications. It accepts wire gauges from 20 to 24 AWG and uses a crimp termination method for secure wire attachment. The contact features a gold finish with a thickness of 50.0µin (1.27µm), providing excellent corrosion resistance and low contact resistance.</p><p>&nbsp;</p><p>This contact is categorized as a signal type and is designed for use in backplane connector systems. It is available in Tape &amp; Reel packaging for automated assembly processes. The part is manufactured by TE Connectivity, a leading supplier of connectivity solutions.</p><p>&nbsp;</p><p>Compliance data indicates RoHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) level, though these values are unverified and should be reviewed against official documentation. The contact is suitable for high-reliability applications in telecommunications, networking, and industrial control equipment.</p>

<p>This TE Connectivity 926882-3 is a socket contact designed for use in rectangular connector systems. It accommodates wire gauges from 14 to 20 AWG and features a crimp termination for secure and reliable connections. The contact is finished with tin, providing good conductivity and corrosion resistance. Typically used in automotive, industrial, and consumer electronics applications where robust wire-to-wire or wire-to-board connections are required. The crimp termination ensures a mechanically strong and electrically stable joint.</p>

<p>This part is a tab contact from TE Connectivity for rectangular connectors, designed for 18 to 20 AWG wires. It features a crimp termination and tin finish, providing reliable electrical connections.</p><p>&nbsp;</p><p>The contact is stamped for cost-effective production and consistent quality. It is suitable for wire-to-board or wire-to-wire applications in industrial and automotive environments.</p><p>&nbsp;</p><p>It is classified under rectangular connector contacts and is RoHS3 and REACH unaffected compliant. However, compliance status is unverified.</p>

<p>The TE Connectivity 5-160430-7 is a Faston series quick disconnect receptacle designed for reliable wire-to-tab connections. It accepts 15.5-20 AWG wire with a wire size range of 0.51 to 1.65 mm² and features a 0.187" (4.75mm) tab width and 0.032" (0.81mm) tab thickness.</p><p>&nbsp;</p><p>This non-insulated female terminal uses an F-crimp style with an open barrel and includes wire insulation support. The contact is made of tin-plated brass, offering good conductivity and corrosion resistance. The terminal is rated for a low insertion force and provides a mating retention force of 7.1 kgf via a dimple retention feature.</p><p>&nbsp;</p><p>The part is supplied in strip/reel packaging and is intended for free hanging (in-line) mounting. It is RoHS compliant and has an MSL rating of 1 (unlimited).</p>

<p>The 282109-1 from TE Connectivity is a rectangular connector contact designed for use in connector housings. It is a tab-type contact that accepts 15 to 18 AWG wire. Termination is accomplished via a crimp connection, providing a secure and reliable electrical and mechanical bond.</p><p>&nbsp;</p><p>The contact features a tin plating finish, which offers good conductivity and corrosion resistance. While a specific current rating and voltage rating are not specified in the available data, the contact is intended for signal and power applications in rectangular connector systems typical of the automotive and industrial sectors.</p><p>&nbsp;</p><p>This part is listed as RoHS3 compliant and REACH unaffected, though these claims are unverified. The contact material is not specified in the provided data. For full design details, including insulation diameter and operating temperature range, consult the manufacturer's datasheet.</p>

<p>The 929387-1 is a socket contact from TE Connectivity's Micro Quadlok system, designed for crimp termination of 20-24 AWG wire. It features a tin-plated contact finish and is constructed with a CuNiSi A5 body and X10CrNi 18 8 spring for reliable mechanical performance.</p><p>&nbsp;</p><p>This contact is suitable for use with flexible flat cables (FFC) and mates with the 929453 pin contact. It is supplied in strip packaging (Bandware) for automated assembly. The Micro Quadlok system enables compact, high-density interconnections in wire-to-wire or wire-to-board applications.</p>

<p>The TE Connectivity 166053-1 is a signal contact designed for D-Sub connectors. It is a male pin contact with a crimp termination style, suitable for wire gauges 20-24 AWG. The contact is made of brass with a gold finish (30.0µin) on the mating area and a tin finish on the termination end. The contact form is stamped and includes insulation support for reliable wire retention. This contact is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 726386-2 is a male quick disconnect tab (disconnect type: quick disconnect pin) part of the FASTON series. It is designed for printed circuit board applications and features a 6.35mm (0.250in) mating tab width and 0.81mm (0.032in) tab thickness with an overall length of 14.0mm (0.551in).</p><p>&nbsp;</p><p>The terminal is straight in orientation and non-insulated. The contact is made of brass with a tin plating (5µm thickness) over a nickel underplating. It terminates via solder to a through hole mounting style.</p><p>&nbsp;</p><p>The part is packed in a box with a quantity of 5000 units. It is Always EU RoHS/ELV Compliant as verified by the manufacturer's material declaration.</p>

<p>This is a 140-position receptacle connector with outer shroud contacts from TE Connectivity. It features a 2-row configuration with a 0.80mm (0.031") pitch, making it suitable for high-density mezzanine board-to-board interconnections. The connector is surface mount and has a mounting height above board of 0.620" (15.75mm).</p><p>&nbsp;</p><p>The contacts are finished with 8.00µin (0.203µm) of gold for reliable electrical performance. A built-in board guide assists with alignment during assembly. The mated stacking height is 17mm, designed for specific board spacing requirements.</p><p>&nbsp;</p><p>This component is classified under Arrays, Edge Type, Mezzanine (Board to Board) connectors. It is commonly used in applications requiring a robust, high-pin-count connection between parallel PCBs.</p>

<p>The TE Connectivity 166051-1 is a signal D-Sub socket contact designed for use with D-Sub connectors. It accepts 20 to 24 AWG wire and is terminated via crimping. The contact is made of phosphor bronze with a gold plating thickness of 30.0µin (0.76µm) on the contact area and a tin finish on the termination end. It features insulation support for reliable wire retention. The contact size is 20 DF. This component is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited). It is suitable for a wide range of signal interconnection applications in industrial, telecommunications, and data processing equipment.</p>

<p>This is a Single Wire Seal (SWS) accessory designed for use with MCP Series rectangular connectors. It is part of the Timer Connector System from TE Connectivity. The seal is made of silicone material in white color, with a cavity diameter of 5.2 mm and a compatible insulation diameter range of 3 mm. It features a Shore A hardness of 50 and contains lubricant to facilitate installation. The operating temperature range is -40 to 130 °C. Resistance to hydrocarbons is poor, and there is no UL flammability rating. The part is compliant with EU RoHS, ELV, China RoHS, REACH, and is low halogen. It is used to seal individual wire entry points in connector cavities, providing environmental protection in automotive and industrial applications.</p>

<p>The TE Connectivity 794955-1 is a crimp pin contact designed for use in VAL-U-LOK connector systems. It accepts 18-22 AWG wire and features a tin contact finish. The contact termination is crimp style, providing reliable connections. The total contact length is 16.6mm as per the production drawing. This part is RoHS compliant and has an MSL of 1 (unlimited). It is suitable for various rectangular connector applications.</p>

<p>The TE Connectivity 1-726388-2 is a non-insulated male quick connect tab designed for through-hole solder mounting. It features a standard 0.187" (4.75mm) tab width with a thickness of 0.032" (0.81mm) and a tab length of 0.252" (6.40mm). The overall length of the terminal is 13.80mm (0.543").</p><p>&nbsp;</p><p>Constructed from brass with a tin contact finish, this terminal offers reliable conductivity and corrosion resistance for general-purpose wire-to-board or wire-to-wire connections. The non-insulated design allows for use in applications where additional insulation or heat shrink tubing can be applied as needed.</p><p>&nbsp;</p><p>This component is RoHS3 compliant and REACH unaffected, making it suitable for use in products sold in regulated markets. The through-hole solder termination provides a robust mechanical and electrical connection in printed circuit board assemblies.</p>

<p>The TE Connectivity 280428-4 is a non-insulated flag quick disconnect receptacle designed for reliable wire-to-tab connections. It accepts 17-20 AWG wire and features a 0.250" (6.35mm) tab width with a 0.299" (7.60mm) tab length and 0.032" (0.81mm) tab thickness. The right-angle flag design allows for space-saving inline or right-angle mounting configurations.</p><p>&nbsp;</p><p>The terminal is constructed from brass with a tin contact finish, providing good conductivity and corrosion resistance. Termination is via crimp, ensuring a secure mechanical and electrical connection. This part is RoHS3 compliant and has an MSL of 1 (unlimited).</p><p>&nbsp;</p><p>Typical applications include power distribution, automotive wiring, and industrial control panels where a compact, reliable quick disconnect is required. The flag orientation is particularly useful in tight spaces where a straight terminal would not fit.</p>

<p>The TE Connectivity 2-2324245-4 is a 24-position, 2-row, shrouded header connector designed for board-to-cable/wire applications. It features male pin contacts made of copper alloy with a tin finish (80.0µin) and a kinked pin solder termination for secure through-hole mounting.</p><p>&nbsp;</p><p>This header has a 2.50mm pitch and row spacing, with a 4-wall shrouded design and a latch holder fastening system for reliable mating. The insulation is natural-colored resin with a UL94 V-0 flammability rating, and the part is glow wire compliant. It is rated for 4.2A current and 250VAC voltage, with an operating temperature range of -55°C to 105°C.</p>

<p>The TE Connectivity 86557-6 is a crimp-type pin contact designed for use with FFC/FPC connector systems. It features a 15.0µin (0.38µm) gold contact finish for reliable low-resistance connections. The contact accepts 22-26 AWG wire and uses a crimp termination for secure attachment. This gold-plated pin contact is suitable for applications requiring durable interconnectivity in flat flexible cable assemblies.</p>

<p>The TE Connectivity 1534685-1 is an IDC Terminal designed for magnetic wire connectors. It uses a PCB Post termination and accepts wire gauges from 26 to 30 AWG. The terminal is of Style 300. This component is intended for connecting magnet wire to a printed circuit board, providing a reliable insulation displacement connection. It is listed as RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited).</p><p>&nbsp;</p><p>With a PCB Post termination, this terminal can be soldered directly into a PCB, simplifying the assembly process. Its IDC design allows fast termination without stripping the wire. The supported wire range makes it suitable for fine-gauge magnetic wires commonly used in coils, transformers, and solenoids.</p><p>&nbsp;</p><p>Design engineers should note that this part has an unverified lead time and placeholder tariff codes that should be reviewed. The part is also known under DigiKey cross-references A117853TR-ND (reel) and A117853CT-ND (cut tape).</p>

<p>The TE Connectivity 1375819-1 is a socket contact designed for use with rectangular connector housings. It accommodates wire gauges 22-26 AWG and features a crimp termination style for secure wire attachment. The contact is finished with tin, providing good conductivity and corrosion resistance. This contact is suitable for various applications requiring reliable connections in harsh environments.</p><p>&nbsp;</p><p>Socket contacts are typically used in conjunction with pin contacts to form a complete connector system. The crimp termination allows for efficient assembly and consistent electrical performance. The tin finish offers a cost-effective solution for many industrial and commercial applications.</p>

<p>The 1-962841-1 from TE Connectivity is a power contact tab designed for use with 17-20 AWG wire. It features a crimp termination method and a tin contact finish with a thickness of 39.4 microinches (1.00 micrometer). This contact is classified as a power type, making it appropriate for applications requiring reliable electrical connections in rectangular connector systems.</p><p>&nbsp;</p><p>The tin finish provides good corrosion resistance and solderability. The crimp termination ensures a secure mechanical and electrical connection when used with the appropriate tooling and housing. This contact is part of a broader family of rectangular connector contacts from TE Connectivity, suitable for wire-to-board or wire-to-wire power interconnections.</p><p>&nbsp;</p><p>While the part is listed as RoHS3 compliant and MSL level 1, these compliance statuses are based on distributor data and have not been independently verified from manufacturer documentation. The datasheet for this part is a multi-variant drawing that does not exclusively confirm this specific part number. No mounting type or standard package quantity is provided.</p>

<p>The TE Connectivity 183024-1 is a rectangular connector contact designed for use in rectangular connector systems. It features a tab (pin) configuration and accepts wire gauges from 15 to 18 AWG. The contact is terminated via crimping, providing a reliable and secure connection. The contact finish is tin, offering good solderability and corrosion resistance.</p><p>&nbsp;</p><p>This contact is suitable for applications requiring a robust and durable connection in rectangular connector housings. The crimp termination ensures consistent electrical performance and mechanical strength. The tin finish provides a cost-effective solution for general-purpose interconnect needs.</p><p>&nbsp;</p><p>Designed for use in a variety of industrial and commercial electronic systems, this contact is a standard component in rectangular connector systems. Its 15-18 AWG wire range accommodates common power and signal wiring.</p>

<p>The TE Connectivity 1534684-1 is an insulation displacement connector (IDC) terminal designed for magnetic wire applications. It accepts wire gauges from 31 to 33 AWG and provides a PCB post termination style, making it suitable for through-hole mounting on printed circuit boards.</p><p>&nbsp;</p><p>This component is classified as a magnetic wire connector, commonly used in transformers, coils, and other inductive devices. The IDC design allows for quick and reliable wire termination without stripping insulation.</p><p>&nbsp;</p><p>Compliance data indicates RoHS3 compliance, REACH unaffected status, and MSL 1 unlimited (all unverified). No packaging or lead time information is available.</p>

<p>The TE Connectivity 280530-1 is a rectangular connector socket contact designed for wire gauges 22 to 26 AWG. It features a crimp termination style for secure and reliable connections. The contact is finished with 16.0 microinches (0.41 micrometers) of gold, providing excellent corrosion resistance and low contact resistance.</p><p>&nbsp;</p><p>This socket contact is suitable for use in rectangular connector housings, commonly found in industrial, automotive, and telecommunications applications. The gold finish ensures durability over multiple mating cycles.</p><p>&nbsp;</p><p>The part is available in tape and reel packaging from distributors such as DigiKey (part numbers A101280TR-ND and A101280CT-ND).</p>

<p>The TE Connectivity 282403-1 is a socket (receptacle) contact from the AMP Superseal 1.5mm series, designed for automotive and industrial applications requiring reliable sealed connections. It accommodates wire sizes 20-22 AWG (0.35 – 0.5 mm²) with an insulation diameter range of 1.2 – 1.6 mm. The contact uses an F-crimp termination method and is plated with tin for the interface and termination area.</p><p>&nbsp;</p><p>This receptacle features a 1.5 mm mating tab width and 0.8 mm tab thickness. It is sealable with a single wire seal (SWS) and includes a primary locking lance for secure retention in the connector housing. The typical current rating is 6 A, and the operating temperature range spans -40 °C to 125 °C.</p><p>&nbsp;</p><p>The 282403-1 is supplied in reel packaging with a quantity of 4000 pieces. It is compliant with RoHS, REACH, ELV, and China RoHS directives, and is low halogen.</p>

<p>The TE Connectivity 42100-2 is a standard female quick disconnect terminal designed for reliable wire-to-tab connections. It accepts 14 to 18 AWG wire and features a 0.250" (6.35mm) tab width with a 0.032" (0.81mm) tab thickness and 0.290" (7.37mm) tab length. The contact is made from brass with a tin finish, providing good conductivity and corrosion resistance. This non-insulated terminal uses a crimp termination method and is intended for free hanging (in-line) mounting. It is commonly used in power distribution, appliance wiring, and automotive applications where a secure, separable connection is needed.</p>

<p>The TE Connectivity 1-215083-0 is a 10 position IDC (Insulation Displacement Connector) plug, part of the Micro-MaTch series. It features a 2.54mm pitch and 2 rows with a row spacing of 1.50mm. The connector is designed for free hanging (in-line) mounting and accepts 28 AWG ribbon cable. The male pin contacts are made of phosphor bronze with a tin over nickel plating. The housing and cover are made of glass filled polyester in red. A feed through feature allows for daisy-chaining. The connector height after cable termination is approximately 5.1mm. This connector is suitable for a variety of signal and data transmission applications requiring reliable flat ribbon cable interconnections.</p>

<p>The TE Connectivity 928814-1 is a standard male quick connect tab terminal designed for solder connection to PCBs. It features a 0.250" (6.35mm) tab width, 0.358" tab length, and 0.032" tab thickness. The contact is made of brass with a tin plating. This terminal is non-insulated and has a through hole, right angle mounting style. The overall length is 50.0 mm. It is delivered as a loose piece in a corrugated shipping box. This part is RoHS3 compliant and REACH unaffected (unverified). It is suitable for applications requiring a reliable solderable quick connect interface.</p>