TE Connectivity

<p>The TE Connectivity 166054-1 is a stamped male pin contact designed for D-Sub connectors. It accepts 24 to 28 AWG wire and uses a crimp termination method. The contact is made of brass with a gold plating thickness of 30 microinches (0.76 micrometers), ensuring excellent conductivity and corrosion resistance. It includes an insulation support feature to secure the wire insulation. This contact is part of the 20 DF contact size series, suitable for signal applications. Its design ensures reliable connections in various electronic interconnect systems.</p>

<p>The TE Connectivity 280001-9 is a standard female quick connect receptacle from the FASTON family. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, with a total length of 19.00mm. The contact is made of brass with a tin finish, ensuring reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This non-insulated receptacle uses crimp termination and accepts wire gauges from 13.5 to 17 AWG. It is rated for a typical current of 20 A (based on 2.5 mm² wire size). The mounting type is free hanging (in-line), making it suitable for quick disconnect applications in various electrical systems.</p><p>&nbsp;</p><p>Designed for speed and reliability, the FASTON product line offers low per-line cost and uniform performance. The 280001-9 is commonly used in automotive, appliance, and industrial control applications where secure and repeatable connections are required.</p>

<p>The TE Connectivity 5-160432-3 is a FASTON series 0.250" female quick disconnect receptacle designed for 15.5-20 AWG wire. This non-insulated terminal features a crimp termination and a free hanging (in-line) mounting style. The contact is made of nickel-plated steel, providing reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This receptacle is part of the TE Connectivity FASTON connection system, which is engineered for quick and reliable wire-to-tab connections. The 0.250" tab width (6.35mm) and 0.032" tab thickness (0.81mm) ensure compatibility with standard 0.250" quick disconnect tabs. The overall length of the terminal is 19.00mm (0.748").</p><p>&nbsp;</p><p>Designed for high-speed automated or manual crimping, this terminal is suitable for a wide range of applications requiring secure, detachable connections. The non-insulated design allows for use in environments where insulation is not required or where additional insulation can be applied separately.</p>

<p>The TE Connectivity 1-925017-0 is a natural-colored polyethylene insulation sleeve designed for use with 0.250" (6.35mm) Faston quick disconnect receptacles. This single-position sleeve provides electrical insulation and mechanical protection for the receptacle terminal in free-hanging (in-line) applications.</p><p>&nbsp;</p><p>Constructed from polyethylene, the sleeve offers good dielectric properties and resistance to common solvents and moisture. The natural color allows for easy identification in assemblies where color coding is not required. The part is designed to fit standard 0.250" quick connect tabs and is compatible with TE Connectivity Faston series receptacles.</p><p>&nbsp;</p><p>This component is suitable for a wide range of wire-to-wire and wire-to-board connections where a reliable, insulated quick disconnect interface is needed. The free-hanging design simplifies installation and allows for easy mating and unmating of the terminal.</p>

<p>This TE Connectivity 963716-1 is a crimp pin contact designed for use with rectangular connector housings. It accommodates 18-20 AWG wire and features a tin-plated finish for reliable conductivity and corrosion resistance. The crimp termination ensures a secure connection. The contact is intended for applications requiring durable, cost-effective interconnect solutions.</p>

<p>The TE Connectivity 280377-1 is a 2-position, single row, 2.54mm pitch header with male pins. It features a shrouded 3-wall design with detent lock fastening, suitable for board-to-board or cable applications. The connector is through hole right angle mounted with solder termination. Contacts are made of brass with a tin finish (118.1µin). The black thermoplastic insulator has a UL94 V-0 flammability rating. Operating temperature range is -40°C to 80°C. Current rating is 3A and voltage rating is 40V.</p>

<p>The TE Connectivity 100494-2 is a standard female quick disconnect receptacle designed for 15-20 AWG wire. It features a 0.187" (4.75mm) tab width, 0.032" (0.81mm) tab thickness, and 0.248" (6.30mm) tab length. The terminal is non-insulated and made of brass with a tin contact finish.</p><p>&nbsp;</p><p>This connector uses a crimp termination method and is intended for free hanging (in-line) mounting. The overall length is 15.00mm (0.591"). It is suitable for applications requiring reliable, quick-connect wire-to-tab connections in a compact form factor.</p>

<p>The TE Connectivity 1326030-1 is a rectangular connector power socket contact suitable for 22 AWG wire. It features a crimp termination style and a tin contact finish with a thickness of 31.5µin (0.80µm). This contact is designed for power applications within rectangular connector systems. The part is listed as RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>This TE Connectivity FASTON Standard line female quick disconnect terminal (part number 2238174-3) is designed for reliable wire-to-tab connections in appliance and automotive applications. It features a 0.187" (4.75mm) tab width, 0.032" (0.81mm) tab thickness, and 0.250" (6.35mm) tab length. The terminal is made of tin-plated brass and uses a crimp termination method for secure wire attachment. It accepts 14-24 AWG wire and is non-insulated for use with separate housings or insulation. The overall length is 18.42mm (0.725"). This terminal is part of TE's Standard FASTON line, which offers reduced insertion force and backward compatibility with existing FASTON housings. It is available in Tape &amp; Reel or Cut Tape packaging.</p>

<p>The TE Connectivity 280371-2 is a 4-position single row shrouded header from the AMPMODU II series. It features a 2.54mm pitch and through hole mounting with solder termination. The connector is designed for board-to-board or cable applications and includes a 3-wall shrouding with detent lock fastening for secure mating.</p><p>&nbsp;</p><p>The header is rated for 3A current and 40V voltage, with an operating temperature range of -40°C to 80°C. The insulation is black thermoplastic with UL94 V-0 flammability rating. Contacts are made of brass with tin plating (3-5µm tin over nickel). The mating contact length is 6.60mm and overall contact length is 14.30mm.</p><p>&nbsp;</p><p>This component is suitable for a variety of interconnection needs where a reliable, polarized connection is required. The shrouded design protects the pins and provides keying to prevent mis-mating.</p>

<p>The 1658670-1 is a stamped pin contact from TE Connectivity, part of their multi-purpose contact family. It is constructed from brass with a 30.0µin (0.76µm) gold plating finish, providing reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This contact accepts wire gauges from 22 to 28 AWG and utilizes a crimp termination method for secure attachment to conductors. The gold plating ensures low contact resistance and durability in repeated mating cycles.</p><p>&nbsp;</p><p>Designed for use in connector systems requiring a pin contact, this component is suitable for a variety of interconnection applications where stamped contacts are preferred for cost-effective and consistent performance.</p>

<p>The TE Connectivity 350766-1 is a rectangular connector plug housing from the Universal MATE-N-LOK (UNI-MATE) series. It features 3 positions arranged in a single row, designed to accept male or female crimp contacts. The housing uses a latch lock fastening mechanism for secure mating and is intended for free hanging (in-line) mounting applications.</p><p>&nbsp;</p><p>The housing is white in color and supports an operating temperature range of -55°C to 105°C. Contacts are terminated via crimp, allowing for reliable wire connections. This housing does not include contacts; they must be ordered separately.</p><p>&nbsp;</p><p>Typical applications include wire-to-wire interconnection systems in automotive, industrial, and consumer electronics. The latch lock ensures vibration resistance and secure mating in demanding environments.</p>

<p>The TE Connectivity 1-175196-5 is a socket contact designed for use in rectangular connector housings. It accommodates wire gauges from 16 to 20 AWG and features a crimp termination style for secure and reliable connections.</p><p>&nbsp;</p><p>The contact is finished with tin plating, providing good solderability and corrosion resistance. This component is suitable for a variety of interconnect applications where a durable and cost-effective contact is required.</p>

<p>The TE Connectivity 63849-1 is a standard male quick connect tab designed for reliable wire-to-board or wire-to-wire connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness with a tab length of 0.312" (7.92mm), making it compatible with common 0.250" series quick disconnect receptacles.</p><p>&nbsp;</p><p>The contact is made from brass with a tin plating, providing good conductivity and corrosion resistance. This non-insulated terminal is terminated via through hole solder, ensuring a permanent and robust mechanical and electrical connection. The overall length of the component is 14.02mm (0.552").</p><p>&nbsp;</p><p>Typical applications include power supplies, automotive electronics, appliances, and industrial control panels where a secure, solderable quick connect interface is required. The part is RoHS3 compliant and REACH unaffected, though these compliance claims are unverified.</p>

<p>The TE Connectivity LUMAWISE Endurance N Enhanced Base (part number 2314786-1) is a lighting control base assembly designed for NEMA/ANSI street and outdoor lighting control solutions. It provides AC power switching and multiple DC power supplies to support complex control node projects.</p><p>&nbsp;</p><p>This base features a universal AC input range of 90-300 VAC and delivers isolated DC outputs: 24 VDC for ballast control communications, 5 VDC for communications, and 3.3 VDC for auxiliary circuits. It includes integrated surge protection rated to ANSI C62.41 6 kV, 3 kA combination wave, and consumes less than 2W standby power at 277 VAC.</p><p>&nbsp;</p><p>Mechanically, the connector has 7 positions with Poke-In termination and mounts to a PCB. The housing is made of black polybutylene terephthalate (PBT) with gold-plated copper alloy contacts. It operates over a temperature range of -40°C to +85°C and relative humidity from 15% to 96%.</p>

<p>The TE Connectivity 180901 is a 4 position female receptacle housing designed for use with 0.250" (6.35mm) quick connect terminals. This housing features a free hanging (in-line) mounting style, making it suitable for applications where panel mounting is not required. The natural color housing accommodates female receptacle terminals and supports stacking in both top-to-bottom and side-to-side directions, allowing for flexible connector arrangements.</p><p>&nbsp;</p><p>This housing is part of TE Connectivity's quick connect terminal system, providing a reliable and secure connection for wire-to-wire or wire-to-board applications. The 4 position configuration offers multiple connection points in a compact form factor. The housing is designed to work with standard 0.250" quick connect tabs, ensuring compatibility with a wide range of mating terminals.</p><p>&nbsp;</p><p>Typical applications include automotive wiring, appliance connections, and industrial control systems where quick and secure wire connections are needed. The free hanging design simplifies installation and allows for easy routing of wires in tight spaces.</p>

<p>The 520971-2 is a female quick disconnect terminal from TE Connectivity's ULTRA-POD 250 series. It features a 0.250" (6.35mm) tab width and accepts 14-18 AWG wire via a crimp termination. The terminal has a right angle flag design for space-constrained applications, with a free hanging (in-line) mounting style. It is fully insulated for electrical safety and comes in a natural color. The contact is made of brass with a tin finish for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This component meets RoHS3 and REACH compliance, and does not contain REACH SVHC. It is halogen-free by BFR/CFR/PVC standard but contains bromine/chlorine above 900 ppm. Suitable for wire harness assembly and quick-disconnect applications in appliances, automotive, and industrial equipment.</p>

<p>The TE Connectivity 281934-3 is a Single Wire Seal (SWS) plug designed for use with AMP Superseal 1.5mm series rectangular connectors. This accessory provides environmental sealing for individual wire cavities, helping to protect connections from moisture and contaminants.</p><p>&nbsp;</p><p>Constructed from red silicone, the seal offers flexibility and a Shore A hardness of 50. It features a 5.5 mm cavity diameter and is compatible with wire insulation diameters ranging from 2.5 to 3.3 mm. The seal contains a lubricant to facilitate assembly.</p><p>&nbsp;</p><p>This component is rated for an operating temperature range of -40 to 130 °C. It has poor resistance to hydrocarbons and carries no UL flammability rating. It is compliant with EU RoHS, EU ELV, China RoHS, and EU REACH regulations.</p>

<p>The TE Connectivity 203956-2 is a backplane connector housing designed for use with female sockets. It offers 36 positions arranged in 4 rows, providing a compact and organized interconnect solution for backplane applications. The housing is panel mount, allowing secure installation in equipment enclosures. It features a jackscrew socket mechanism for reliable mating and unmating. The housing is black in color and is intended for use with a plug connector. This component is RoHS3 compliant and has an MSL rating of 1 (unlimited).</p>

<p>The 1658539-1 is a crimp pin contact manufactured by TE Connectivity. It features a stamped brass construction with a gold finish plating of 0.76 µm (30.0 µin). This contact is designed for wire gauges ranging from 20 to 24 AWG. Termination is accomplished via crimping, ensuring a secure and reliable connection.</p><p>&nbsp;</p><p>The gold plating provides excellent corrosion resistance and low contact resistance, making it suitable for high-reliability multi-purpose connector applications. The stamped design allows for cost-effective high-volume production while maintaining consistent electrical performance.</p><p>&nbsp;</p><p>This pin contact is intended for use in connector systems where a durable and conductive interface is required. It mates with corresponding socket contacts to form a complete connector assembly.</p>

<p>The TE Connectivity 170262-2 is a stamped socket contact designed for crimp termination to 20-26 AWG wire. It features a tin contact finish suitable for many signal and power interconnect applications. The contact is supplied in tape and reel packaging for automated assembly processes.</p><p>&nbsp;</p><p>This socket contact is intended for use in rectangular connector housings from TE Connectivity, providing reliable electrical connections in wire-to-wire or wire-to-board configurations. The crimp termination method offers a strong mechanical and electrical bond when used with the appropriate crimp tool.</p><p>&nbsp;</p><p>The tin plating provides good solderability and corrosion resistance for general purpose applications. The stamped fabrication allows for consistent performance and cost-effective high-volume production.</p>

<p>The TE Connectivity 178421-7 is a cavity plug designed as an accessory for 120-position ECU rectangular connectors. This sealing plug is intended to occupy unused cavities within the connector housing, providing environmental protection and preventing contamination.</p><p>&nbsp;</p><p>Mechanically, the part is classified as a connector sealing plug and is categorized under rectangular connector accessories. The component carries a Moisture Sensitivity Level (MSL) of 1, indicating unlimited floor life before soldering.</p><p>&nbsp;</p><p>The 178421-7 complies with RoHS3 standards and is reported as REACH Unaffected, making it suitable for use in applications where restricted substance regulations must be observed. As a plug accessory, it is a non-active mechanical component used to seal connector interfaces.</p>

<p>The TE Connectivity 179228-2 is a rectangular connector housing designed for use with female socket contacts. It has 2 positions arranged in a single row with a 2.00mm pitch, making it suitable for compact wire-to-wire or wire-to-board connections. The housing is natural in color and rated for an operating temperature range of -55°C to 85°C. It supports free hanging (in-line) mounting and uses crimp termination for secure wire attachment. This housing is part of TE's rectangular connector family and is RoHS3 compliant (unverified). It is commonly used in applications requiring reliable signal or power connections in a small form factor.</p>

<p>The TE Connectivity 280610-1 is a 4-position single row rectangular header designed for wire-to-board or board-to-board applications. It features male pin contacts with a 3.96mm pitch and a vertical through-hole mounting style for solder termination.</p><p>&nbsp;</p><p>The header is fully shrouded with a 2-wall design, providing mechanical protection and proper mating alignment. It uses a detent lock fastening type for secure connection retention. Contacts are made of brass with a tin finish, and the insulator is green polycarbonate, glass filled, rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>This product is part of the Headers, Male Pins category and is suitable for general-purpose interconnect applications requiring a rugged, polarized connection.</p>

<p>The TE Connectivity 967067-1 is a sealing plug accessory for rectangular connectors, specifically designed for use with MQS (Micro Quadlok System) connectors. It accommodates wire sizes ranging from 0.50 to 0.75 mm². This single-position plug provides environmental sealing to protect connections from moisture and contaminants. The part is RoHS3 compliant and has an MSL of 1 (unlimited). It is commonly used in automotive and industrial applications where reliable sealing is required. Note: This product is a sealing plug, not a connector housing.</p>

<p>The TE Connectivity 929967-1 is a power stamped contact pin designed for use in circular connector systems. It accommodates wire sizes from 17 to 20 AWG and features a crimp termination for secure and reliable connections. The contact is made of copper alloy with a tin finish (1.00µm thickness), providing good conductivity and corrosion resistance. An insulation support is included for strain relief, enhancing durability in demanding applications. This contact is suitable for power transmission and signal applications within circular connector housings.</p>

<p>The TE Connectivity 170362-3 is a stamped socket contact designed for use in multi-purpose connector systems. It accommodates 18 to 22 AWG wire and features a brass contact material with a gold plating thickness of 0.76µm (30.0µin). The crimp termination provides a reliable mechanical and electrical connection. This socket contact is suitable for a variety of signal and power applications where a durable, low-resistance interface is required.</p>

<p>The TE Connectivity 62429-1 is a Poke-In terminal designed for magnetic wire connections. It features an IDC (Insulation Displacement Contact) termination method, accommodating wire gauges from 27 to 30 AWG. The terminal is part of Style 300, Size 2, and includes a locking feature for secure mating.</p><p>&nbsp;</p><p>This component is listed as RoHS3 compliant, MSL Level 1, and REACH unaffected, though these statuses are unverified. It is available in tape and reel (A105489TR-ND) and cut tape (A105489CT-ND) packaging formats.</p><p>&nbsp;</p><p>The 62429-1 is suitable for applications requiring reliable termination of fine magnet wires, such as in transformers, coils, and motors. Its locking mechanism ensures vibration resistance, while the IDC design simplifies assembly without the need for wire stripping.</p>

<p>The TE Connectivity 794954-2 is a VAL-U-LOK series rectangular connector housing designed for wire-to-board and wire-to-wire applications. This receptacle housing accommodates 12 female socket contacts arranged in 2 rows with a 4.20mm pitch and row spacing. The housing is made of polyamide (PA) nylon insulation material with a UL 94V-2 flammability rating, ensuring reliable performance in a variety of environments.</p><p>&nbsp;</p><p>Key specifications include a latch lock fastening type for secure mating, an operating temperature range of -40°C to 105°C, and a voltage rating of 600 VAC. The housing is natural in color and supports crimp termination for the contacts. It is designed for free hanging (in-line) mounting and does not include contacts, which must be ordered separately.</p><p>&nbsp;</p><p>This connector housing is suitable for applications requiring a robust and reliable interconnection solution. The VAL-U-LOK series is known for its ease of use and durability in demanding environments.</p>

<p>The TE Connectivity 926869-1 is a crimp socket contact designed for rectangular connector systems. It accepts wire gauges from 13 to 15 AWG and features a tin contact finish. The contact type is socket (female), and termination is via crimp. This contact is part of TE Connectivity's broad range of connector components and is suitable for use in various power and signal applications. Tin plating provides good solderability and corrosion resistance. Compliance with RoHS, REACH, and MSL level 1 is claimed but unverified.</p>

<p>The TE Connectivity 180984 is a connector boot designed for use with 0.250" (6.35mm) quick connect terminals, specifically flag-type receptacles. This boot provides insulation and strain relief for female quick disconnect terminals in a compact, right-angle configuration.</p><p>&nbsp;</p><p>Key specifications include a single position, female receptacle gender, and a natural color housing. The mounting type is free hanging (in-line) with a right angle orientation, allowing for space-efficient wiring in tight enclosures. The terminal size is 0.250" (6.35mm), and the boot is compatible with flag quick connects.</p><p>&nbsp;</p><p>This boot is suitable for applications requiring reliable insulation and mechanical protection for quick disconnect connections. The free hanging design simplifies installation without additional hardware. The natural color indicates standard material composition, typically nylon or similar thermoplastic.</p>

<p>The 964972-1 is a wire seal accessory from TE Connectivity designed for use with MCP series rectangular connectors. This single-position seal provides environmental protection for the contact area. It is compliant with RoHS3, REACH unaffected, and has an MSL of 1 (unlimited). This seal is suitable for applications requiring reliable sealing in connector systems.</p>

<p>The TE Connectivity 170364-1 is a stamped pin contact designed for wire-to-wire or wire-to-board interconnect systems. The contact accommodates 18 to 22 AWG wire gauge and uses a reliable crimp termination method. The contact is made from brass with a tin finish, offering good conductivity and corrosion resistance for general-purpose applications.</p><p>&nbsp;</p><p>This component falls under the Multi Purpose contact category within TE Connectivity's broad connector portfolio. It is commonly used in power and signal connections where a durable, cost-effective pin contact is required. The part is rated RoHS3 compliant and has an MSL of 1 (unlimited floor life) for moisture sensitivity, simplifying handling during assembly.</p><p>&nbsp;</p><p>No packaging or mounting style data is available from the existing database. For exact dimensions, current rating, and operating temperature range, refer to the manufacturer's datasheet.</p>