TE Connectivity

<p>The TE Connectivity 42475-4 is a standard male quick disconnect tab designed for reliable wire-to-wire or wire-to-board connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, with a tab length of 0.370" (9.40mm) and overall length of 20.70mm (0.815"). The terminal accepts 18 to 22 AWG wire and uses a crimp termination method for secure attachment.</p><p>&nbsp;</p><p>Constructed from brass with a tin contact finish, the 42475-4 offers good conductivity and corrosion resistance. It is non-insulated and designed for free hanging (in-line) mounting, making it suitable for applications where insulation is not required or where additional insulation can be applied separately.</p><p>&nbsp;</p><p>This terminal is commonly used in automotive, industrial, and consumer electronics for quick connect/disconnect applications. The male tab mates with standard 0.250" female quick disconnect receptacles.</p>

<p>The TE Connectivity 347874-1 is a cable seal designed for use with EconoSeal series connectors. It is made from green silicone rubber, offering flexibility and a wide operating temperature range of -40 to 125°C. The seal has a cavity diameter of 1.1 mm and is compatible with wire insulation diameters from 1.6 to 2.4 mm, which corresponds to 20-15 AWG wire.</p><p>&nbsp;</p><p>This seal features a Shore A hardness of 40 and contains lubricant to facilitate assembly. It exhibits poor resistance to hydrocarbons, so it is not recommended for environments with oil or fuel exposure. The part is packaged in bags of 10,000 units and is suitable for use in automotive, industrial, and other applications requiring environmental sealing at connector wire entry points.</p><p>&nbsp;</p><p>Compliance includes EU RoHS Directive 2011/65/EU, EU ELV Directive 2000/53/EC, and low halogen content (Br, Cl, F, I &lt; 900 ppm, BFR/CFR/PVC free). It is not applicable for solder processes. The 347874-1 is a reliable sealing solution for EconoSeal connectors, ensuring protection against moisture and contaminants.</p>

<p>The TE Connectivity 170360-1 is a stamped pin contact designed for use in connector systems requiring reliable wire-to-wire or wire-to-board connections. It accommodates 18-22 AWG wire and uses a crimp termination method for secure, gas-tight connections.</p><p>&nbsp;</p><p>The contact is made from brass with a tin finish, providing good conductivity and corrosion resistance. As a stamped pin contact, it is suitable for high-volume production and automated assembly processes.</p><p>&nbsp;</p><p>This contact is commonly used in automotive, industrial, and consumer electronics applications where a durable and cost-effective interconnect solution is needed. The tin finish ensures compatibility with a wide range of mating surfaces and environmental conditions.</p>

<p>The TE Connectivity 350566-7 is a miniature wire to board terminal from the AMP Mini AMP-IN series. It is designed for 18-22 AWG wire and features a brass contact with a tin (Post Tin) plating. The terminal is through hole mounted with a PCB hole diameter of 1.85mm and an extension below board of 3.43mm, suitable for a PCB thickness of 1.57mm. It accommodates insulation diameters from 1.52mm to 2.79mm.</p><p>&nbsp;</p><p>This terminal is RoHS compliant and lead free, capable of wave solder processes up to 240°C or 265°C. It is packaged in strip form. The locking terminal type ensures secure retention in the PCB during soldering and use.</p>

<p>The TE Connectivity 927771-1 is a socket contact from the Junior Power Timer (JPT) series, designed for power applications in rectangular connector systems. It accommodates wire gauges from 17 to 20 AWG and uses a crimp termination style for secure, reliable connections. The contact is finished with tin plating, providing good solderability and corrosion resistance. This contact is suitable for use in automotive and industrial environments where robust power connections are required. The JPT series is known for its compact design and high current capacity.</p>

<p>The TE Connectivity 163305-2 is a pin contact for rectangular connectors. It accommodates wire gauges of 17-20 AWG and uses a reliable crimp termination method. The contact surface is finished with tin, providing good conductivity and resistance to corrosion.</p><p>&nbsp;</p><p>This component is designed for use in rectangular connector housings, enabling the creation of custom cable assemblies. The crimp termination allows for secure, gas-tight connections without requiring soldering, which can speed up assembly and improve consistency.</p><p>&nbsp;</p><p>The tin plating ensures compatibility with many standard applications where cost-effective performance is required. This contact is suitable for a range of industrial, commercial, and automotive wiring applications within the specified wire range.</p>

<p>The TE Connectivity 1-968849-1 is a crimp socket contact designed for use in rectangular connector systems. It accepts wire gauges from 17 to 20 AWG and features a tin contact finish with a thickness of 39.4 microinches (1.00 micrometers). The contact is terminated via crimping, providing a reliable mechanical and electrical connection.</p><p>&nbsp;</p><p>This component is available in Tape &amp; Reel packaging for automated assembly, as well as Cut Tape options through distributors. It is compliant with RoHS3, REACH unaffected, and has a Moisture Sensitivity Level (MSL) of 1 (unlimited). The socket contact is suitable for a variety of applications requiring secure wire-to-board or wire-to-wire connections within TE Connectivity's rectangular connector families.</p>

<p>The 794617-6 is a 6-position receptacle housing from TE Connectivity's Micro MATE-N-LOK series. It features a dual row configuration with 3.00mm pitch and 3.00mm row spacing. The housing is designed for free hanging (in-line) mounting and uses a latch lock fastening mechanism for secure mating. Contacts are crimp terminated, allowing for reliable wire connections. The housing is black and rated for operating temperatures from -40°C to 105°C. It is RoHS compliant and REACH unaffected. This connector housing is suitable for use in a variety of wire-to-wire interconnect applications where a compact, reliable connection is required.</p>

<p>The TE Connectivity 1-154719-0 is a single-position housing for 0.250" (6.35mm) quick connect terminals. It is a female receptacle-style housing intended for use with matching quick disconnect tabs. The housing is made of polyamide 6/6 or equivalent material and is rated UL 94 V0 for flame retardancy. It also meets a glow wire test at 750°C without flame, making it suitable for applications requiring high thermal resistance.</p><p>&nbsp;</p><p>The housing is designed for free hanging (in-line) mounting, offering flexibility in wiring harnesses and point-to-point connections. The clear color allows visual inspection of terminal insertion. This housing is intended for use with 0.250" (6.35mm) quick connect terminals. Note that the color is specified as Clear in the datasheet, while initial data listed Natural — verify with manufacturer for final color.</p>

<p>TE Connectivity 1744429-6 is a rectangular connector header designed for board-to-cable/wire applications. It features 6 male pin contacts arranged in a single row with a pitch of 3.96mm (0.156 inches). The header is through-hole mounted and terminated by solder. The housing is shrouded with one wall and includes a friction lock for secure mating.</p><p>&nbsp;</p><p>The contact material is brass with a tin finish, having a thickness of 120µin (3.05µm). The insulation is made of polyamide (nylon) in natural color, with a flammability rating of UL94 V-0. The operating temperature range is -25°C to 105°C. Electrical ratings are 7.5A per contact and 250VAC. Additional features include a board guide and glow wire compliance.</p><p>&nbsp;</p><p>This header is suitable for power and signal connections in various industrial, commercial, and appliance applications. The through-hole package provides reliable mechanical attachment to the PCB. The friction lock ensures the connector remains engaged under vibration.</p>

<p>The TE Connectivity 926887-1 is a split pin contact designed for use in rectangular connector systems. It accepts 14 to 20 AWG wire and features a crimp termination for secure and reliable connections. The contact is finished with tin for corrosion resistance.</p><p>&nbsp;</p><p>This contact is part of the 926887 series and is suitable for power or signal applications within compatible housings. It is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited).</p>

<p>The TE Connectivity 1744429-7 is a 7-position, single-row header connector designed for board-to-cable/wire applications. It features a 3.96mm pitch and through hole mounting with solder termination. The header is shrouded with a single wall and includes a friction lock for secure mating. Contacts are male pins made of brass with a tin finish (3.05µm thickness). The insulation is natural polyamide (PA) nylon with a UL94 V-0 flammability rating. Electrical ratings include 7.5A current and 250VAC voltage. Operating temperature range is -25°C to 105°C. The connector includes a board guide and is glow wire compliant. All 7 positions are loaded. Overall contact length is 14.60mm with a contact length of 7.70mm and insulation height of 3.22mm.</p><p>&nbsp;</p><p>This header is suitable for applications requiring reliable wire-to-board connections in industrial, automotive, and consumer electronics. The friction lock ensures retention against vibration. The glow wire compliance indicates suitability for high-temperature environments.</p>

<p>The TE Connectivity 1718044-1 is a 2 position, single row plug housing designed for the DuoPlug connector system. It features a 5.00mm pitch and accepts tab contacts with crimp termination. The housing is made of natural polyamide (PA6.6) and carries a UL94 V-2 flammability rating.</p><p>&nbsp;</p><p>This free hanging (in-line) housing uses a latch lock fastening mechanism for secure mating. It is designed for use with recommended tab contacts such as TE part numbers 284798-1 (0.5-0.75mm²), 293322-1 (0.3-0.8mm²), or 1955441-1 (0.2-0.5mm²). The housing supports wire ranges from 24 AWG to 18 AWG depending on contact selection.</p><p>&nbsp;</p><p>The 1718044-1 is part of the DuoPlug connector family and is compatible with DuoPlug MK II and DuoPlug Power mating connectors. The housing features a keying pattern for polarization and includes a latch lock for secure connection. It is rated for glow wire testing at 750°C without flame per IEC 60695-2-11 and IEC 60335-1.</p>

<p>The TE Connectivity 926893-1 is a socket-type rectangular connector contact designed for wire gauges 14 through 20 AWG.</p><p>&nbsp;</p><p>This contact uses a crimp termination method, providing a secure and reliable connection for wire-to-wire or wire-to-board applications. The contact is finished with tin, offering good solderability and corrosion resistance.</p><p>&nbsp;</p><p>As a socket contact, it is the female half of a connector pair, intended for use with a corresponding pin contact in a rectangular connector housing.</p>

<p>The TE Connectivity 962876-2 is a socket contact designed for use with Micro Timer 2 connector housings. This contact accommodates wire gauges from 17 to 20 AWG and is terminated using a standard crimp tool, providing a reliable and repeatable connection.</p><p>&nbsp;</p><p>The contact features a tin plating over the base material, which offers good corrosion resistance and solderability for many automotive and industrial applications. The double locking lance design, as referenced in the product change notification, ensures secure retention within the connector housing.</p><p>&nbsp;</p><p>As a socket contact, it mates with corresponding pin contacts to form a complete circuit within a rectangular connector system. The crimp termination allows for field installation and repair without specialized soldering equipment, making it suitable for wire harness assembly.</p>

<p>The TE Connectivity 280370-1 is a 2-position, single-row shrouded header from the AMPMODU MODII series. It features a 2.54mm pitch and through-hole solder termination, making it suitable for board-to-board or cable-to-board connections. The header is shrouded with a 3-wall design and includes a detent lock for secure mating.</p><p>&nbsp;</p><p>Electrical ratings include 3A current and 40V voltage. The contacts are made of brass with a 3µm tin finish, and the insulation is black thermoplastic rated UL94 V-0. Operating temperature range is -40°C to 80°C. The overall contact length is 14.30mm with an insulation height of 12.60mm.</p><p>&nbsp;</p><p>This connector is designed for general-purpose interconnection in industrial, consumer, and automotive applications where reliable low-power signal connections are required. The through-hole mounting provides robust mechanical attachment to PCBs.</p>

<p>The TE Connectivity 5-962886-1 is a stamped and formed crimp pin terminal designed for automotive and industrial applications. It accepts 20 to 24 AWG wire (0.2 to 0.5 mm²) with an insulation diameter range of 1.1 to 1.6 mm. The contact features a 0.63 mm mating tab width and thickness, tin plating on the interface, and an F-crimp termination method for reliable wire attachment. It is rated for a typical current of 7.5 A and can handle up to 24 A in low-power applications. Operating temperature range is -40 to 120°C. The terminal is sealable with a single wire seal (SWS) and includes a primary locking lance for secure retention in compatible housings. It is part of the MQS series and is supplied on reels of 9000 pieces. Environmental compliance includes RoHS, REACH, ELV, China RoHS, and low halogen content (&lt;900 ppm). Cross-references include DigiKey part numbers A126708CT-ND and A126708TR-ND.</p>

<p>The TE Connectivity 640456-3 is a rectangular connector header designed for board to cable/wire applications. It features 3 positions in a single row with a 2.54mm pitch, and all positions are loaded. The connector uses male pin contacts made of copper alloy with a tin finish. The shrouded - 1 wall design and friction lock fastening provide secure mating. The header is through hole mounted and terminated by solder.</p><p>&nbsp;</p><p>Electrical ratings include 250VAC voltage and current rating that varies by wire gauge. The insulation is natural thermoplastic with a UL94 V-0 flammability rating. The operating temperature range is -55°C to 105°C. Contact length is 7.49mm with an overall contact length of 13.59mm and insulation height of 7.75mm. This header is suitable for general purpose board to wire connectivity in various electronic assemblies.</p>

<p>The TE Connectivity 927768-3 is a power socket contact designed for rectangular connectors. It accommodates 13-17 AWG wire and uses a crimp termination method for reliable connections. The contact features a tin plating with a thickness of 39.4 microinches (1.00 micrometers), providing corrosion resistance and good solderability. It is supplied in Tape &amp; Reel or Cut Tape packaging suitable for automated assembly processes. This contact is RoHS3 compliant and has a moisture sensitivity level of 1, indicating unlimited floor life. It is intended for use in power distribution and interconnect applications within TE Connectivity connector systems.</p>

<p>The TE Connectivity 926882-1 is a crimp socket contact designed for rectangular connector systems. It accommodates wire gauges from 14 to 20 AWG, making it suitable for a range of power and signal applications.</p><p>&nbsp;</p><p>The contact features a tin finish for good solderability and corrosion resistance. Termination is via crimp, providing a reliable mechanical and electrical connection without soldering.</p><p>&nbsp;</p><p>This contact is intended for use in TE Connectivity's rectangular connector housings. It is listed as RoHS3 compliant, though this data is unverified. The part is also available from distributors under cross-reference numbers such as DigiKey A100853TR-ND and A100853CT-ND.</p>

<p>The TE Connectivity 1-480699-0 is a 2 position rectangular connector housing from the UNI-MATE series. It is designed as a receptacle housing that accepts male or female crimp contacts. The housing features a locking ramp fastening type for secure mating and is designed for panel mount, snap-in installation.</p><p>&nbsp;</p><p>This housing is rated for an operating temperature range of -55°C to 105°C. The natural color housing provides basic environmental protection for the contacts. The single row configuration with 2 positions makes it suitable for compact wire-to-wire or wire-to-board applications.</p><p>&nbsp;</p><p>The connector housing is RoHS3 compliant and REACH unaffected. The moisture sensitivity level is MSL 1 unlimited. These compliance ratings support use in a wide range of electronic assemblies requiring standard environmental protection.</p>

<p>The TE Connectivity 1-487547-2 is a socket contact designed for use with flat flexible cable (FFC) and flexible printed circuit (FPC) connectors. This contact features a gold finish with a thickness of 15.0 microinches (0.38 micrometers), providing reliable electrical performance and corrosion resistance. The crimp termination method ensures secure attachment to the cable conductors. This socket contact is suitable for applications requiring a durable and low-resistance connection in compact electronic assemblies. It is compliant with RoHS and REACH regulations, and has an MSL rating of 1 (unlimited).</p>

<p>The TE Connectivity 963715-5 is a crimp socket contact designed for rectangular connector systems. It accommodates 18-20 AWG wire and features a gold contact finish for reliable conductivity. The contact is of stamped construction and uses a crimp termination method. This socket contact is suitable for use in various interconnect applications requiring secure wire connections.</p>

<p>The TE Connectivity 3-640108-1 is a wire-to-board terminal designed for 22-26 AWG wires. It features phosphor bronze contacts with a tin finish for reliable conductivity and corrosion resistance. The terminal is a locking through-board type, suitable for applications requiring secure mechanical retention. It has a length of 6.35mm (0.250") and accommodates insulation diameters from 0.060" to 0.100" (1.52mm to 2.54mm). The mounting hole diameter is 1.40mm (0.055"). The component is wave solder capable up to 265°C, making it compatible with standard wave soldering processes. It is available in tape and reel or cut tape packaging. The part is compliant with EU RoHS, EU ELV, China RoHS 2, and REACH regulations, and is low halogen.</p>

<p>The 925819-3 is a miniature AMP-IN contact from TE Connectivity, designed for wire-to-board connections. It accommodates 22-26 AWG wires with an insulation diameter range of 0.040 to 0.060 inches (1.02mm to 1.52mm). The contact features a brass body with a tin finish, providing good conductivity and solderability. Its through board locking terminal type ensures secure retention in the PCB hole, which has a recommended diameter of 0.050 inches (1.27mm). The locking lance prevents contact back-out, and the stabilizer barrel holds the contact steady during soldering. This contact is suitable for automated termination processes and is RoHS3 compliant.</p>

<p>The 6104-202-2102 is an INS PIN ASSY circular connector housing manufactured by TE Connectivity Deutsch Connectors. This component is designed for use in circular connector systems, providing a robust housing for pin contacts.</p><p>&nbsp;</p><p>Key compliance attributes include RoHS3 compliance, REACH unaffected status, and a Moisture Sensitivity Level (MSL) of 1 (unlimited). These specifications indicate the part meets current environmental standards and has no moisture sensitivity restrictions.</p><p>&nbsp;</p><p>As a circular connector housing, this part is suitable for applications requiring reliable interconnection in demanding environments. The INS PIN ASSY designation suggests it is a pin assembly intended for insertion into a connector shell.</p>

<p>The TE Connectivity 5-160431-2 is a FASTON 0.187" Series non-insulated quick disconnect receptacle designed for reliable and fast wire connections. This female terminal features a crimp termination and accepts wire gauges from 13.5 to 17 AWG. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. It is rated for 20 A maximum current (with 2.5 mm² wire). The free hanging (in-line) mounting style allows for easy integration into wiring harnesses. As part of the FASTON product line, it offers proven reliability and low per-line cost for quick connect/disconnect applications.</p>

<p>This TE Connectivity 171822-3 is a 3-position rectangular connector housing designed for use with female socket contacts. It features a 2.50mm pitch, free hanging (in-line) mounting style, and crimp termination. The natural color housing is rated for operating temperatures from -20°C to 95°C. Typical applications include wire-to-wire connections in industrial and automotive environments where a compact, reliable housing is required. The single-row design accommodates 3 contacts, making it suitable for low-power signal or power applications.</p>

<p>The TE Connectivity 770902-1 is a crimp socket contact designed for use in the Mini-Universal MATE-N-LOK connector system.</p><p>&nbsp;</p><p>This contact accommodates 22-26 AWG wire with an insulation diameter range of 1.27-1.75 mm. Made from stamped brass with a tin plating, it is suitable for wire-to-wire and wire-to-board applications.</p><p>&nbsp;</p><p>The contact is crimp terminated and is available in tape and reel packaging. It is RoHS3 and REACH compliant (unverified).</p>

<p>The TE Connectivity 2238171-3 is a FASTON Standard Line quick disconnect receptacle designed for reliable and efficient wire termination. This female flag terminal features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, making it compatible with standard 0.250" quick disconnect tabs. It accepts a wide wire range of 12-22 AWG and uses a crimp termination method for secure connections.</p><p>&nbsp;</p><p>The terminal is constructed from tin plated brass, offering good conductivity and corrosion resistance. As a non-insulated, free-hanging (in-line) right-angle flag terminal, it is suitable for applications where space is limited and a right-angle connection is needed. The Standard Line design includes a dogbone-shaped front end for reduced insertion force and is backward compatible with existing FASTON housings.</p>

<p>The TE Connectivity 180464-2 is a non-insulated female quick disconnect terminal with a right-angle flag design. It accepts 13.5-17 AWG wire and uses crimp termination. The tab measures 0.250" (6.35mm) wide, 0.299" (7.60mm) long, and 0.032" (0.81mm) thick. The contact is made of brass with a tin finish. This terminal is suitable for applications requiring a reliable quick-connect interface in confined spaces due to its flag configuration. It is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 140814-1 is a non-insulated male quick connect tab designed for reliable electrical connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, ensuring compatibility with standard quick connect receptacles. The terminal is angled at 45°, allowing for flexible routing in tight spaces. Constructed from brass, the contact offers good conductivity and durability. This component supports board or chassis mounting with termination options including screw, rivet, or stud, providing secure attachment in various applications. It is commonly used in power distribution, automotive wiring, and industrial control systems.</p>

<p>TE Connectivity 926883-1 is a crimp-type pin contact designed for use in rectangular connector systems. It provides a reliable termination for wires in the 14 to 20 AWG range.</p><p>&nbsp;</p><p>The contact features a tin-plated finish for good conductivity and corrosion resistance. Termination is achieved via crimping, ensuring a secure mechanical and electrical connection. This part is a pin (male) contact intended to mate with corresponding socket contacts.</p><p>&nbsp;</p><p>The product is RoHS3 compliant and has an MSL (Moisture Sensitivity Level) of 1, indicating no special handling requirements. REACH status is reported as unaffected.</p><p>&nbsp;</p><p>According to a product change notification (PCN E-18-010208), the logo on the part drawing was updated from AMP to TE. This change does not affect form, fit, or function.</p>

<p>The TE Connectivity 7-188275-8 is a surface mount receptacle connector from the Micro-MaTch series. It features 8 positions arranged in 2 rows with a 2.54mm pitch and 0.100" row spacing. The connector uses forked contacts with tin finish and has a push-pull fastening mechanism. The red insulation has a height of 5.30mm and is rated UL94 V-0 for flammability. Operating temperature range is -40°C to 105°C with a voltage rating of 100VDC. The connector supports board-to-board or cable applications and includes a pick and place feature for automated assembly. Packaging uses blister tape (PS clear) for higher temperature tolerance up to 90°C/60% RH as per PCN E-13-019830. This connector is suitable for various electronic assemblies requiring a compact, reliable interconnection. The surface mount design enables efficient automated soldering processes. The tin contact finish provides good solderability and corrosion resistance. The push-pull fastening allows easy mating and unmating without tools.</p>

<p>The TE Connectivity 1744429-2 is a 2-position, single-row header connector designed for board-to-cable/wire applications. It features a 3.96mm (0.156") pitch and through-hole mounting with solder termination.</p><p>&nbsp;</p><p>The header is shrouded with one wall and includes a friction lock for secure mating. Contacts are made of brass with a tin finish (120µin thickness). The insulator is natural polyamide (nylon) with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical ratings include 7.5A current and 250VAC voltage. Operating temperature range is -25°C to 105°C. The part is glow wire compliant and includes a board guide feature.</p><p>&nbsp;</p><p>This connector is suitable for power and signal connections in various applications. The through-hole design provides reliable mechanical attachment to the PCB.</p>

<p>The TE Connectivity 2238172-3 is a .187in female flag quick disconnect terminal from the FASTON Standard line. It is designed for free hanging, right angle mounting with crimp termination. The terminal accepts wire gauges from 14 to 24 AWG and features a tin-plated brass contact for reliable conductivity.</p><p>&nbsp;</p><p>The terminal has a tab width of 0.187 inches (4.75mm) and a tab thickness of 0.032 inches (0.81mm). It is a non-insulated, angled 90° flag receptacle with an F crimp style. The contact material is brass with a tin finish.</p><p>&nbsp;</p><p>This component is suitable for applications requiring a secure, quick-disconnect connection in a space-constrained orientation. The flag design allows for right-angle mating, which is useful in tight layouts. The crimp termination provides a gas-tight connection for consistent electrical performance.</p>