TE Connectivity

<p>The TE Connectivity 927827-2 is a power socket contact designed for use with rectangular connector housings. It accommodates wire gauges from 17 to 20 AWG and features a crimp termination style for secure, reliable connections. The contact is finished with tin plating, providing good conductivity and corrosion resistance. This contact is part of the Power Timer series, suitable for power distribution applications in automotive, industrial, and general electronic systems. The part is listed as RoHS compliant, REACH unaffected, and has an MSL of 1 (Unlimited), though this data is unverified from official sources.</p>

<p>The TE Connectivity 735075 is a housing designed for 0.250" (6.35mm) quick connect terminals. It is a female receptacle type with a single position and features free hanging (in-line) mounting. The housing is natural in color. It is intended for use with 0.250" quick connect terminals. The housing is claimed to be RoHS compliant, though this status is unverified. Moisture sensitivity level is stated as 1 (unlimited). Typical applications include wire-to-wire connections in automotive, appliance, and industrial control systems where quick, reliable terminations are needed.</p>

<p>The TE Connectivity 1534686-1 is an IDC (Insulation Displacement Connector) terminal designed for magnetic wire applications. It accepts 23-26 AWG wire gauge and terminates via a PCB post, making it suitable for direct soldering to printed circuit boards. The terminal is classified under style 300.</p><p>&nbsp;</p><p>This component is intended for use in connectors and interconnects within the magnetic wire connector category. It is RoHS3 compliant and REACH unaffected, supporting environmental and regulatory requirements for many electronic assemblies.</p><p>&nbsp;</p><p>The PCB post termination provides a reliable mechanical and electrical connection when soldered to a board. The IDC design allows for quick wire termination without stripping insulation, reducing assembly time.</p>

<p>The TE Connectivity 962885-1 is a crimp socket contact designed for rectangular connectors. It accommodates 20 to 23 AWG wire and features a tin contact finish. The crimp termination provides a secure connection. This contact is RoHS3 compliant and has an MSL of 1 (unlimited). It is suitable for use in various interconnect applications.</p>

<p>The TE Connectivity 282110-1 is a crimp socket contact designed for rectangular connector systems. It accommodates 15-18 AWG wire and features a tin contact finish for reliable conductivity and corrosion resistance. The crimp termination provides a secure, gas-tight connection suitable for automated assembly.</p><p>&nbsp;</p><p>This socket contact is intended for use in TE Connectivity rectangular connector housings. The tin plating offers good solderability and is compatible with a wide range of applications. The part is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 927768-1 is a power socket contact designed for use in rectangular connector systems. It accommodates wire gauges from 13 to 17 AWG and is terminated using a reliable crimp method. The contact is finished with tin, with a thickness of 39.4 microinches.</p><p>&nbsp;</p><p>This socket contact is intended for power applications requiring a durable and conductive interface. The crimp termination provides a secure and consistent connection for wire assembly. The tin finish offers good solderability and corrosion resistance.</p><p>&nbsp;</p><p>As part of TE Connectivity's broad portfolio of connector solutions, this component is designed for demanding environments. It is suitable for use in a variety of industrial, automotive, and commercial equipment where rectangular connectors are specified.</p>

<p>The TE Connectivity 927777-3 is a crimp socket contact from the Junior Power Timer series designed for power applications. It accommodates 16-14 AWG (1-2.5 mm²) wire and features a tin (Sn) interface plating with a thickness of 1.00 µm.</p><p>&nbsp;</p><p>The contact is rated for 25-40 A and operates over a temperature range of -40 to 130 °C. It utilizes an F-crimp termination method and is uninsulated and non-sealable. The contact size is 2.8 mm with a tab length of 18.8 mm.</p><p>&nbsp;</p><p>This contact is manufactured using stamped and formed fabrication. It is supplied in boxes of 1000 pieces. The part is compliant with EU RoHS, EU ELV, China RoHS 2, and is halogen-free and REACH SVHC-free.</p>

<p>The 1-928918-1 is a rectangular connector pin contact manufactured by TE Connectivity. It is a stamped contact with a crimp termination style, designed for wire sizes 20-24 AWG (0.25-0.35 mm²). The contact features a tin finish, providing reliable conductivity and corrosion resistance. With a length of 21.5 mm and a weight of 0.16 g, this contact is suited for compact and high-density connector applications. It is compatible with TE Connectivity's MQS and similar rectangular connector systems. The crimp termination ensures secure wire attachment, suitable for automated assembly. This contact is part of the 928918 series and is commonly used in automotive, industrial, and consumer electronics interconnect applications.</p>

<p>The TE Connectivity 292228-2 is a 2-position, single-row, right-angle surface mount header from the AMP Mini CT series. It features a fully shrouded 4-wall design with a detent lock fastening system for secure mating with wire-to-board connectors.</p><p>&nbsp;</p><p>The contacts are made of brass with a tin finish and a square post shape, providing a reliable electrical connection. The header is rated for a maximum current of 2A and a voltage of 50VAC, suitable for signal circuit applications in compact electronic assemblies.</p><p>&nbsp;</p><p>The insulation body is molded from glass-filled polyamide (PA6T) in a beige color, with a UL94 V-0 flammability rating. Solder retention features assist in reliable PCB mounting. The header is packaged in tape and box format with a quantity of 700 pieces per package.</p>

<p>The TE Connectivity 2-963964-3 is a machined tab contact intended for press-fit mounting in rectangular connector applications. It features a CuNiSi R580S contact material with a tin finish and is designed for use with a 1.0 mm mating pin diameter on PCBs of 1.6 mm nominal thickness. The component uses a 2.54 mm pitch and has an overall length between 8.05 mm and 11.65 mm (depending on version). It meets solderability requirements per DIN 40046.</p><p>&nbsp;</p><p>This action pin design is suitable for high-reliability interconnection in industrial and automotive environments where a gas-tight press-fit connection is required. The press-fit termination eliminates the need for soldering, reducing assembly time and thermal stress on the PCB.</p>

<p>The TE Connectivity 216842-4 is a non-insulated quick connect tab designed for through-hole press-fit mounting. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, making it suitable for standard quick disconnect applications. The male terminal is constructed from phosphor bronze with a silver contact finish, ensuring reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This terminal has an overall length of 18.50mm (0.728") and a tab length of 7.49mm (0.295"). The press-fit termination style provides a secure mechanical connection without soldering, simplifying assembly in high-volume production environments. The part is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p><p>&nbsp;</p><p>Typical applications include power distribution, automotive wiring, and industrial control systems where quick connect/disconnect functionality is required. The non-insulated design allows for use in applications where insulation is not needed or where additional insulation can be applied separately.</p>

<p>The 794606-1 is a stamped socket contact from TE Connectivity's Micro MATE-N-LOK series. It accepts 20-24 AWG wire and terminates via crimp. The contact is finished with tin (59.0µin / 1.50µm thickness) for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is designed for use in Micro MATE-N-LOK connector housings, providing a secure snap-in retention. The crimp termination ensures a gas-tight connection suitable for wire-to-wire and wire-to-board applications.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and has an MSL rating of 1 (unlimited). Multiple manufacturer aliases exist including BM6321-000, PER-1-794606-1, and F30642-000.</p>

<p>The TE Connectivity 280359 is an AMPMODU II single row receptacle housing designed for 2.54mm pitch crimp snap-in contacts. It accommodates 4 positions in a single row configuration.</p><p>&nbsp;</p><p>This housing is intended for free hanging (in-line) mounting and uses female socket contacts with a crimp termination style. The housing material is liquid crystal polymer (LCP) with a black finish, providing a UL 94V-0 flammability rating for improved fire resistance.</p><p>&nbsp;</p><p>This part is part of the AMPMODU II series and is commonly used in wire-to-wire or wire-to-board interconnects where reliable, high-temperature performance is required.</p>

<p>The TE Connectivity 1393367-1 is a rectangular connector socket contact designed for 22 AWG wire. It utilizes crimp termination for secure and reliable connections. The contact finish is tin, providing corrosion resistance and good solderability.</p><p>&nbsp;</p><p>This socket contact is suitable for use in a variety of wire-to-board and wire-to-wire rectangular connector systems. The crimp termination ensures consistent mechanical and electrical performance. The tin finish is compatible with many connector housings and mating pins.</p><p>&nbsp;</p><p>As a socket contact, it is designed to receive a mating pin contact. The 22 AWG wire gauge is commonly used in signal and moderate power applications. The part is RoHS3 compliant (unverified) and has an MSL of 1, indicating unlimited floor life before soldering.</p><p>&nbsp;</p><p>Please note that current rating, voltage rating, and operating temperature range are not specified in the available data. A datasheet is not currently available for this part.</p>

<p>The TE Connectivity 640456-2 is a 2-position, single-row header from the MTA-100 series. It features a 2.54mm (0.100") pitch and is designed for wire-to-board applications. The header has a shrouded design with one wall and includes a friction lock for secure mating.</p><p>&nbsp;</p><p>The connector uses through-hole mounting with solder termination. The square pins are made of copper alloy with a tin plating of 3.81 µm (150 µin) on the mating area. The overall contact length is 13.59mm (0.535") with a mating post length of 7.49mm (0.295").</p><p>&nbsp;</p><p>Rated for 5A current and 250VAC, the header operates over a temperature range of -55°C to 105°C. The insulation is natural thermoplastic with a UL94 V-0 flammability rating. The component is RoHS3 compliant and CSA certified.</p>

<p>The TE Connectivity 170361-1 is a stamped socket contact designed for use with 22-26 AWG wire. The contact is constructed from brass and features a tin plating for reliable conductivity and corrosion resistance. Termination is via a crimp connection, ensuring a secure and durable wire attachment.</p><p>&nbsp;</p><p>This socket contact is suitable for a variety of multi-purpose connector applications where a reliable, low-resistance connection is required. The stamped construction provides a cost-effective solution for high-volume production. The tin finish is compatible with a wide range of mating surfaces.</p><p>&nbsp;</p><p>The component is declared RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited). It is available in tape and reel (A97687TR-ND) and cut tape (A97687CT-ND) packaging options for automated assembly.</p>

<p>The TE Connectivity 170031-1 is a standard female quick disconnect terminal designed for free hanging (in-line) mounting. It accepts 14-20 AWG wire and uses a crimp termination method for secure connections.</p><p>&nbsp;</p><p>The terminal has a tab width of 0.250" (6.35mm), a tab length of 0.307" (7.80mm), and a tab thickness of 0.032" (0.81mm). The overall length is 0.756" (19.20mm). The contact is made of brass and is non-insulated.</p><p>&nbsp;</p><p>This component is commonly used in power and signal applications where a reliable, quick-connect interface is required. The non-insulated design allows for use in applications where additional insulation or heat shrink is applied after termination.</p>

<p>The TE Connectivity 1241380-1 is a socket contact used in rectangular connector systems. It is designed to terminate 18 to 20 AWG wire using a crimp termination method, ensuring a secure and reliable electrical connection.</p><p>&nbsp;</p><p>The contact is finished with tin plating, which provides good conductivity and corrosion resistance for general-purpose applications. As a socket contact, it mates with corresponding pin contacts to complete the connector circuit.</p><p>&nbsp;</p><p>This component is suitable for use in a variety of industrial, automotive, and commercial equipment where rectangular connectors are employed. The crimp termination allows for efficient wire harness assembly and field serviceability.</p>

<p>The TE Connectivity 281934-4 is a rectangular connector accessory classified as a plug. It has a single position and is described as a rubber plug, indicating it is likely used for sealing or covering unused connector cavities.</p><p>&nbsp;</p><p>This accessory is part of TE Connectivity's range of rectangular connector components. It is specified as a plug type accessory, suitable for use in various connector housings that require a single-position plug.</p><p>&nbsp;</p><p>Note that compliance data is available but unverified: RoHS3 compliant, REACH unaffected, and MSL 1 Unlimited. These ratings should be independently verified before use in critical applications. The cross-reference part number A123393-ND is available from DigiKey.</p>

<p>The TE Connectivity 2-160256-2 is a non-insulated female quick disconnect receptacle, part of the widely used 0.250" series tab connectors. This terminal is designed for free hanging (in-line) mounting and uses a reliable crimp termination method, suitable for 13-17 AWG wire.</p><p>&nbsp;</p><p>The contact is made of tin-plated brass, providing good conductivity and corrosion resistance. The key mechanical dimensions include a tab width of 0.250 inches (6.35 mm), a tab thickness of 0.032 inches (0.81 mm), and a tab length of 0.303 inches (7.70 mm). The overall length of the terminal is 19.00 mm (0.748 inches).</p><p>&nbsp;</p><p>As a non-insulated terminal, it is intended for applications where additional insulation or a heat-shrink sleeve is applied after crimping. This design offers flexibility for custom wiring harnesses and power distribution systems.</p>

<p>The TE Connectivity 166052-1 is a D-Sub female socket contact designed for signal applications. It features a stamped phosphor bronze contact with a gold finish of 30.0µin (0.76µm) and a tin termination finish. The contact accepts 24-28 AWG wire and uses a crimp termination method. The contact size is 20 DF and includes insulation support for reliable wire connections.</p><p>&nbsp;</p><p>This contact is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited). It is suitable for use in D-Sub connectors requiring a high-reliability signal contact. The gold plating ensures excellent conductivity and corrosion resistance, while the phosphor bronze material provides good spring properties.</p><p>&nbsp;</p><p>As a crimp-style contact, it allows for easy field installation and repair. The insulation support feature helps secure the wire insulation, reducing strain on the crimp connection. This contact is commonly used in industrial, telecommunications, and data processing equipment.</p>

<p>The TE Connectivity 770904-1 is a stamped socket contact designed for the Mini-Universal MATE-N-LOK connector system. It accepts 18-22 AWG wire with an insulation diameter range of 1.50-2.39 mm and is terminated via crimp. The contact is made of brass with a tin plating, providing reliable electrical performance for wire-to-wire and wire-to-board applications.</p><p>&nbsp;</p><p>This contact is rated for up to 9.5 A maximum per line and is intended for free-hanging (wire-to-wire or wire-to-panel) configurations. It is supplied as a loose piece, suitable for low-volume assembly or prototyping.</p><p>&nbsp;</p><p>The Mini-Universal MATE-N-LOK system is used in household appliances, lighting, medical equipment, security systems, industrial controls, and HVAC systems. The 770904-1 socket contact is a standard component for building custom cable assemblies within this connector family.</p>

<p>The 1544407-4 is a SIL (Single In-Line) contact from TE Connectivity designed for through hole mounting. It features a 2.54mm pitch, phosphor bronze contact material with a tin finish. The frame thickness is 0.010" (0.25mm) and pin length is 0.276" (7.00mm). The frame width is 0.581" (14.75mm) and clip length is 0.067" (1.70mm). This contact is suitable for leadframe applications requiring reliable connections. The through hole termination provides robust mechanical attachment to PCBs.</p>

<p>The TE Connectivity 929939-1 is a socket contact from the Junior Power Timer product line, designed for rectangular connectors. It accommodates 17-20 AWG wire and features a crimp termination.</p><p>&nbsp;</p><p>The contact is made of CuSn4 alloy with a pre-tinned finish (minimum 1 µm thickness). It is unsealed and suitable for power applications.</p><p>&nbsp;</p><p>This contact is commonly used in automotive and industrial applications requiring reliable power connections. The crimp termination ensures a secure wire attachment.</p>

<p>The TE Connectivity 350654-1 is a crimp-type pin contact designed for use with Universal MATE-N-LOK connectors. It accommodates wire gauges from 14 to 20 AWG and features a tin contact finish for reliable conductivity.</p><p>&nbsp;</p><p>This pin contact is terminated by crimping, providing a secure mechanical and electrical connection without soldering. It is rated RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited).</p><p>&nbsp;</p><p>Designed for general-purpose rectangular connector applications, the 350654-1 is suitable for use in power and signal circuits within industrial, automotive, and consumer electronics environments. The tin finish offers good corrosion resistance and solderability.</p><p>&nbsp;</p><p>The product belongs to TE Connectivity's Universal MATE-N-LOK series, a widely used interconnect system known for its reliability and ease of assembly.</p>

<p>The TE Connectivity Micro-MaTch series receptacle connector, part number 8-188275-0, is a 10-position, 2-row female connector designed for surface mount applications. It has a pitch of 2.54mm and row spacing of 2.54mm, making it compatible with standard grid patterns.</p><p>&nbsp;</p><p>Key specifications include tin-plated forked contacts, a push-pull fastening mechanism, and an insulation height of 5.30mm. It is rated for a voltage of 100VDC and operates over a temperature range of -40°C to 105°C. The insulation material is red with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Suitable for board-to-board or cable connections, this connector includes a pick-and-place feature for automated assembly. It is terminated by solder and available in tape and reel packaging for high-volume production.</p>

<p>The TE Connectivity 1-968851-1 is a socket contact designed for rectangular connector systems. It accommodates 13-17 AWG wire and uses a crimp termination method for secure, reliable connections. The contact is finished with tin plating (39.4 µin / 1.00 µm) for good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is suitable for use in a variety of wire-to-wire and wire-to-board applications where a durable, low-resistance connection is required. The crimp termination provides a gas-tight joint that maintains performance over temperature and vibration.</p><p>&nbsp;</p><p>As a socket contact, it mates with corresponding pin contacts in rectangular connector housings. The tin finish is compatible with standard tin-plated mating surfaces.</p>

<p>The TE Connectivity 828920-1 is a wire seal accessory designed for circular connectors. It is made from gray silicone elastomer, providing flexibility and durability for environmental sealing against moisture, dust, and contaminants.</p><p>&nbsp;</p><p>Key specifications include support for 2 to 4 contact positions and a cable diameter range of 1.2mm to 2.1mm. The silicone material offers good resistance to temperature extremes and aging, making it suitable for industrial environments.</p><p>&nbsp;</p><p>This wire seal is intended for use in industrial automation and control systems where reliable sealing of circular connector interfaces is required. It is a legacy/discontinued product, so availability may be limited. No operating temperature range or package quantity is specified.</p>

<p>The TE Connectivity 350561-7 is a pin contact designed for use in rectangular connector housings. It features a crimp termination style for secure wire attachment and accepts wire gauges from 18 to 24 AWG. The contact is finished with gold plating, providing reliable conductivity and corrosion resistance. The gold finish thickness is 0.76 µm. This component is RoHS3 compliant and has an MSL rating of 1 (Unlimited). It is suitable for a variety of interconnection applications where a durable and conductive pin contact is required.</p>

<p>The TE Connectivity 154719-1 is a single-position quick connect housing designed for use with 0.250" (6.35mm) quick disconnect terminals. This female receptacle housing is constructed from natural PA 6/6 or equivalent material, offering a UL94 V2 flammability rating and a glow wire test rating of 750°C per IEC 60335-1.</p><p>&nbsp;</p><p>This housing supports free hanging (in-line) mounting and is suitable for small wire applications when used with post-plated or washed contacts. The natural color allows for easy visual identification in wire harness assemblies.</p><p>&nbsp;</p><p>With a weight of just 0.5 grams, this compact housing is ideal for space-constrained applications requiring reliable quick connect terminations. The PA 6/6 material provides good mechanical strength and thermal performance for general-purpose use.</p>

<p>The 927771-3 is a power socket contact from TE Connectivity's Junior Power Timer (JPT) series, designed for crimp termination. It accepts 17-20 AWG wire and features a tin plating with 1.00 µm thickness for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is part of the JPT family, a widely used interconnect system for automotive and industrial applications requiring a compact, high-current interface. The crimp termination ensures a secure, gas-tight connection when used with the appropriate crimp tool.</p><p>&nbsp;</p><p>The contact is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited). It is available in tape and reel packaging from distributors.</p>

<p>The TE Connectivity MAG-MATE 62420-1 is a Poke-In magnet wire terminal designed for reliable IDC (Insulation Displacement Connection) termination of magnet wires. It accommodates magnet copper or magnet aluminum wire in the 22-20 AWG range and lead wire from 20-18 AWG (0.81-1.02 mm²).</p><p>&nbsp;</p><p>The terminal features a locking mechanism and barbs for secure mating retention within a housing. It is uninsulated and has a Post-Tin plating material. The overall length is 7.62 mm with a material thickness of 0.41 mm.</p><p>&nbsp;</p><p>This component is rated for an operating temperature range of -20 to 105 °C. It is packaged in reel form with 12,000 pieces per reel. Compatible with TE Connectivity MAG-MATE connector systems.</p>

<p>The TE Connectivity 1674742-1 is a rectangular connector contact designed as a pin contact for use in power and signal interconnection systems. This contact features a crimp termination style, providing a reliable and secure connection when used with compatible housings. The contact is finished with tin, offering good conductivity and solderability.</p><p>&nbsp;</p><p>This component is RoHS3 compliant and unaffected by REACH, making it suitable for use in products requiring environmental compliance. The moisture sensitivity level is rated as MSL 1, indicating unlimited floor life before soldering.</p><p>&nbsp;</p><p>As a pin contact in rectangular connector systems, this part is commonly used in wire-to-wire and wire-to-board applications where a durable and repeatable connection is needed. The crimp termination allows for automated or manual assembly, reducing installation time and ensuring consistent mechanical and electrical performance.</p>

<p>The TE Connectivity 42475-4 is a standard male quick disconnect tab designed for reliable wire-to-wire or wire-to-board connections. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, with a tab length of 0.370" (9.40mm) and overall length of 20.70mm (0.815"). The terminal accepts 18 to 22 AWG wire and uses a crimp termination method for secure attachment.</p><p>&nbsp;</p><p>Constructed from brass with a tin contact finish, the 42475-4 offers good conductivity and corrosion resistance. It is non-insulated and designed for free hanging (in-line) mounting, making it suitable for applications where insulation is not required or where additional insulation can be applied separately.</p><p>&nbsp;</p><p>This terminal is commonly used in automotive, industrial, and consumer electronics for quick connect/disconnect applications. The male tab mates with standard 0.250" female quick disconnect receptacles.</p>