Amphenol RF

<p>The Amphenol RF A-1JB is a surface-mount AMC (U.FL) coaxial connector designed for high-frequency applications up to 6 GHz. It features a 50 Ohm impedance, snap-on fastening, and a male pin center contact.</p><p>&nbsp;</p><p>This jack is rated for 60 VAC operating voltage and 200 VAC dielectric withstanding voltage. The center contact is copper alloy with gold plating, and the outer contact is silver-plated copper alloy. The white high-temperature plastic housing meets UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The connector is supplied in tape and reel packaging with 2500 pieces per reel, suitable for automated assembly. Operating temperature range is -40°C to +90°C.</p>

<p>The Amphenol RF 132245 is an SMA coaxial connector assembly featuring a jack, female socket configuration with a right-angle body style. It is designed for 50 Ohm impedance systems and supports a maximum frequency of 12.4 GHz. The connector uses threaded fastening for secure mating and is terminated to the cable via solder for the center contact and crimp for the shield. It accommodates cable groups including RG-174, RG-188, RG-316, LMR-100, and M17/119-RG174. The center contact is made of beryllium copper and the housing has a gold color finish. This connector is rated as weatherproof for ingress protection and is intended for free-hanging (in-line) mounting.</p>

<p>The 901-10606 is a high-performance SMA coaxial connector manufactured by Amphenol RF. It is configured as a female jack (socket) with a straight orientation and standard polarity, making it suitable for general-purpose RF interconnect applications.</p><p>&nbsp;</p><p>This connector is designed for crimp termination on both the center contact and shield, providing reliable and consistent connections with LMR-100A cable. The center contact is made of beryllium copper, ensuring durability and good electrical performance.</p><p>&nbsp;</p><p>With a 50 Ohm impedance and a maximum operating frequency of 12.4 GHz, the 901-10606 is appropriate for a wide range of RF systems, including antennas, test equipment, and telecommunications infrastructure. Its panel mount bulkhead mounting style with front side nut allows for secure chassis installation.</p><p>&nbsp;</p><p>The housing is silver-colored and uses threaded fastening for mating. This connector is also available as a direct equivalent to other industry-standard parts, such as the Rosenberger 32K607-303L5.</p>

<p>The 132354 is an SMA coaxial connector assembly from Amphenol RF. It features a jack female socket interface with a 50 Ohm impedance and is rated for operation up to 18 GHz. The connector uses a threaded fastening mechanism for secure mating and is designed for panel mount installation with a flange mounting feature.</p><p>&nbsp;</p><p>Contact termination is via solder, and the shield is also solder terminated. The center contact is made of beryllium copper, and the housing has a gold color finish. This connector includes extended insulation for enhanced performance.</p><p>&nbsp;</p><p>This component is suitable for RF applications requiring a reliable 50 Ohm connection in a panel mount configuration. The solder termination allows for permanent attachment to coaxial cables.</p>

<p>The Amphenol RF 901-9758 is an SMA receptacle connector designed for RF coaxial applications. It features a female socket interface with a 50 Ohm impedance, supporting frequencies up to 12.4 GHz. The connector is panel mounted using a flange with threaded fastening, ensuring secure installation. Both the center contact and shield are terminated via solder, and the center contact is made of beryllium copper. The housing is silver in color. This connector is suitable for use in telecommunications, test equipment, and other RF systems requiring reliable signal transmission.</p>

<p>The Amphenol RF 145104-01-06.00 is a coaxial cable assembly featuring SMB right angle plugs on both ends, terminated to RG-316/U cable. This assembly provides a 50 Ohm impedance and is shielded for reliable RF signal transmission. The cable length is 6.00 inches (152.40 mm) with a tolerance per the Amphenol drawing. This assembly is part of the 145104 series and is designed for DC to 3.0 GHz frequency range. The connectors use female contacts and are free-hanging (in-line) mounting type. The assembly is Hi-Pot tested to 500 VRMS. It is packaged as a single unit.</p>

<p>The Amphenol RF 901-144 is a coaxial connector (RF) assembly featuring an SMA receptacle style with a female socket contact. It is designed for through hole mounting and uses solder type contact and shield termination. The connector has a threaded fastening mechanism for secure mating.</p><p>&nbsp;</p><p>The center contact is made of beryllium copper, and the housing has a gold color finish. The impedance is 50 Ohm, making it suitable for standard RF applications. This connector is a single-port device.</p><p>&nbsp;</p><p>This product is listed as RoHS3 compliant, REACH unaffected, and has an MSL rating of 1 (unlimited). Compliance data is unverified. The part is packaged in standard bulk packaging (quantity unknown).</p>

<p>The Amphenol RF 000-27000 is an MHV (Miniature High Voltage) coaxial connector designed as a receptacle with a female socket contact. This connector is intended for panel mounting with a flange, utilizing a bayonet locking mechanism for secure mating.</p><p>&nbsp;</p><p>Key mechanical features include a solder cup contact termination and solder shield termination, with the center contact made from beryllium copper. The housing is silver-colored and includes extended insulation. It is rated as weatherproof, suitable for environments where moisture resistance is needed.</p><p>&nbsp;</p><p>Electrically, the connector supports frequencies up to 50 GHz and has a non-constant impedance. It is a single-port design. The connector falls under the MHV series, which is commonly used in high-voltage RF applications up to several kV, but the specific voltage rating is not provided in the available data.</p>

<p>This F Type jack connector from Amphenol RF features a right angle PCB mount design with threaded coupling and IP67 moisture seal. It operates from DC to 2.15 GHz with 75 Ohm nominal impedance. Electrical performance includes VSWR of 1.43 max at 1 GHz and 1.93 max at 2.15 GHz, with insertion loss of 0.2 dB and 0.46 dB respectively. The connector is rated for 3 A current. Construction uses a zinc die-cast body with tin plating, phosphor bronze center and lockwasher contacts, PTFE insulator, and silicone rubber membrane seal. It is designed for panel mounting with a bulkhead front side nut and through-hole solder termination. Suitable for outdoor and indoor RF applications requiring reliable moisture protection.</p>

<p>The Amphenol RF 122168 is a TNC jack connector with a female socket interface, designed for 50 Ohm impedance systems. It supports frequencies up to 11 GHz, making it suitable for RF applications requiring reliable signal integrity.</p><p>&nbsp;</p><p>This connector features crimp termination for both the center contact and shield, ensuring secure and consistent connections. The panel mount with bulkhead front side nut allows for robust installation in enclosures or chassis.</p><p>&nbsp;</p><p>The housing is silver in color, and the center contact is made of phosphor bronze. It is compatible with cable groups including RG-58, 58A, 58B, 58C, 141, 303, LMR-195, and Belden B7806A, 9907.</p>

<p>The Amphenol RF 902-9224 is a Micro RF coaxial connector, configured as a female socket jack. Designed for surface mount installation, it provides a 50 Ohm characteristic impedance and supports frequencies up to 2.5 GHz. The connector utilizes a push-pull fastening mechanism for secure mating.</p><p>&nbsp;</p><p>The jack features gold plated contacts and housing for reliable conductivity and corrosion resistance. The contact material is brass, while the body is constructed from beryllium copper and brass. Insulator material is LCP. The operating temperature range is -30 to 85°C, and the connector is rated for 1200 mating cycles. It includes a full detent feature.</p><p>&nbsp;</p><p>Termination for both contact and shield is solder, making it suitable for direct PCB soldering in compact RF applications. This connector is part of the Amphenol RF Micro RF series.</p>

<p>The 034-1030-12G is an HD-BNC jack connector from Amphenol RF designed for 75 Ohm coaxial systems. It features a female socket contact with beryllium copper center contact material and bayonet lock fastening for secure connections.</p><p>&nbsp;</p><p>This connector supports frequencies up to 18 GHz and offers a right angle orientation for space-constrained PCB layouts. Termination is via solder for both the contact and shield, ensuring reliable electrical and mechanical bonds.</p><p>&nbsp;</p><p>Mounting is panel mount with a bulkhead front side nut feature, and the housing is available in gold and silver finishes. The single-port design is suitable for high-frequency signal routing in broadcast, telecommunications, and test equipment applications.</p>

<p>The Amphenol RF 122440 is a TNC (Threaded Neill-Concelman) coaxial connector receptacle featuring a female socket contact. It is designed for through hole mounting with solder contact and shield termination, providing a secure threaded fastening mechanism. The connector offers a characteristic impedance of 50 Ohms and supports frequencies up to 11 GHz, making it suitable for RF applications requiring reliable signal integrity. The center contact is made of phosphor bronze, and the housing has a silver color finish. This connector is classified as a coaxial connector (RF) assembly and is RoHS3 and REACH compliant (unverified).</p>

<p>The 930-111J-51P is a QMA receptacle with a female socket contact, designed for 50 Ohm impedance RF applications up to 6 GHz. It features a right angle body style and supports both surface mount and through hole mounting with a bulkhead front side nut mounting feature. The snap-on fastening mechanism enables quick and easy mating without the need for wrench clearance, saving space in dense PCB layouts.</p><p>&nbsp;</p><p>Electrical specifications include a dielectric withstanding voltage of 1000 V RMS, working voltage up to 480 V RMS, and typical power handling of 150 W at 2.5 GHz. Contact resistance is 3.0 mOhm maximum for the center contact and 2.5 mOhm maximum for the outer contact. The connector provides screening effectiveness of -80 dB minimum from DC to 3 GHz and -70 dB minimum from 3 to 6 GHz.</p><p>&nbsp;</p><p>The housing is gold plated, and the center contact is made of beryllium copper. Both contact and shield terminations are solder type. The connector is rated for a minimum of 100 mating cycles with typical engagement force of 25 N and disengagement force of 20 N. Operating temperature range is -40 to +85 °C.</p>

<p>The Amphenol RF 919-NM122P-51A is an MCX series coaxial connector designed as a plug with male pin contact. It features a right angle, free hanging (in-line) mounting style with snap-on fastening. The connector offers 50 Ohm impedance and supports frequencies up to 6 GHz. Contact termination is solder, while shield termination is crimp. The center contact is made of beryllium copper, and the housing is silver colored. This connector is compatible with cable groups RG-178, 178A, 178B, 196, 196A, and M17/93-RG178. It is non-magnetic and RoHS3 compliant (unverified). The connector is suitable for RF applications requiring a compact, right-angle interface.</p>

<p>The Amphenol RF 31-220N is a BNC jack to BNC jack coaxial adapter designed for same-series connections. It features a straight body style with female center contacts on both ends, providing a reliable interconnect for 50 Ohm systems. The adapter supports frequencies up to 4 GHz and uses a bayonet lock fastening mechanism for quick and secure mating.</p><p>&nbsp;</p><p>This adapter is panel mounted with a bulkhead mounting feature, making it suitable for fixed installations where a pass-through connection is required. The center contacts are silver plated for good conductivity and corrosion resistance. The adapter is RoHS3 compliant and has an MSL of Level 1 (unlimited).</p>

<p>The Amphenol RF 901-9894-RFX is an SMA coaxial connector assembly featuring a plug, male pin configuration. It is designed for 50 Ohm impedance and supports frequencies up to 18 GHz. This connector is suitable for RF applications requiring reliable signal transmission.</p><p>&nbsp;</p><p>This right angle through hole connector utilizes threaded fastening for secure mating. The center contact is made of brass, and the housing is gold plated. Both contact and shield terminations are solder type, ensuring durable connections in PCB designs.</p><p>&nbsp;</p><p>The connector is rated as weatherproof, offering protection in challenging environments. It is commonly used in telecommunications, test equipment, and wireless systems where SMA interfaces are standard.</p>

<p>The Amphenol RF 132331 is a shorting cap accessory for SMA coaxial connectors. It is constructed from brass with a gold body finish, providing good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This cap is specifically designed for use with SMA jacks. It functions as both a protective cover and a shorting device, making it suitable for test and measurement applications where signal integrity is important.</p><p>&nbsp;</p><p>The gold finish ensures reliable electrical contact and long-term durability.</p>

<p>The Amphenol RF 112661 is a BNC jack connector featuring a female socket with 75 Ohm impedance and 4 GHz frequency rating. It offers a right angle orientation and panel mount with through hole solder termination. The connector includes a bayonet lock fastening type and bulkhead mounting feature. Center contact is beryllium copper, and housing color is black and silver. This connector also features a board lock for secure attachment.</p>

<p>The Amphenol RF 31-4702 is a BNC plug connector designed for RF applications. It features a male pin contact and provides 50 Ohm impedance for consistent signal transmission.</p><p>&nbsp;</p><p>The connector uses crimp termination for both the center contact and shield, ensuring reliable connections. It is designed for free hanging (in-line) mounting and uses a bayonet lock fastening mechanism.</p><p>&nbsp;</p><p>With a frequency rating of 4 GHz, this connector is suitable for various RF systems. It is compatible with cable groups including RG-59, 59B, 62, 140, 210, and Belden 8241, 8263, 8279, 9209. The housing is silver and the center contact is made of brass.</p>

<p>The Amphenol RF 31-315 is a BNC plug connector designed for coaxial cable assemblies. It features a male pin center contact and a 50 Ohm impedance, supporting frequencies up to 4 GHz. The connector uses a 3-piece crimp design for both center and shield termination, ensuring reliable electrical and mechanical connections.</p><p>&nbsp;</p><p>This connector is compatible with a range of cable types including RG-174, RG-188, RG-316, LMR-100, and M17/119-RG174. The free hanging (in-line) mounting style with bayonet lock fastening allows quick and secure mating. The housing is silver-colored, and the center contact is made of brass.</p><p>&nbsp;</p><p>Designed for RF signal transmission, this BNC plug is suitable for telecommunications, test equipment, and data networking applications. The crimp termination simplifies field installation and provides consistent performance.</p>

<p>The Amphenol RF 901-9895-RFX is an SMA plug, male pin coaxial connector designed for through hole PCB mounting. It offers a 50 Ohm impedance and supports frequencies up to 18 GHz, making it suitable for high-frequency RF applications. The connector features a threaded fastening mechanism for secure mating and is terminated via solder on both the center contact and shield.</p><p>&nbsp;</p><p>The connector's housing is gold-plated, and the center contact is made of brass. It is rated as weatherproof, providing environmental protection for outdoor or demanding applications. The single-port design is ideal for where a stable, high-performance RF connection is needed.</p><p>&nbsp;</p><p>The 901-9895-RFX is classified as RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited) for moisture sensitivity. Its through hole mounting ensures reliable mechanical attachment and electrical connectivity on printed circuit boards.</p>

<p>The Amphenol RF 112178 is a BNC plug connector designed for coaxial cable termination. It features a male pin center contact made of brass and a silver-plated housing. The connector offers a 50 Ohm impedance and supports frequencies up to 4 GHz.</p><p>&nbsp;</p><p>The connector uses a bayonet lock fastening mechanism for quick and secure connections. The contact is terminated via solder, while the shield is terminated via crimp. It is designed for free hanging (in-line) right angle mounting.</p><p>&nbsp;</p><p>This connector is compatible with cable groups RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174. It is a single-port assembly suitable for various RF applications.</p>

<p>The 925-106A-51S from Amphenol RF is a micro-miniature SMPM same-series adapter designed for high-frequency coaxial interconnect applications. This straight adapter features jack to jack (female to female) contacts with a 50 Ohm impedance and is capable of operation from DC to 26.5 GHz typical, with extended performance up to 65 GHz as noted in the datasheet. Electrical characteristics include a maximum insertion loss of 0.1 dB at 1 GHz, return loss better than -23 dB up to 10 GHz, and a dielectric withstanding voltage of 325 V. The center contacts are gold plated, and the coupling mechanism is snap-on (push-on) on both sides, providing quick and secure mating. The free-hanging (in-line) mounting style makes it suitable for cable-to-cable or cable-to-board connections where space is limited. Typical applications include antenna systems, back plane connections, broadband, wireless infrastructure, military equipment, and instrumentation.</p>

<p>The 122348 is a straight TNC to TNC coaxial adapter from Amphenol RF, designed for same-series connections. Both ends feature a TNC jack with a female socket center gender, making it suitable for joining two male TNC-terminated cables or components.</p><p>&nbsp;</p><p>This adapter provides a 50 Ohm impedance and supports frequencies up to 11 GHz. The body is finished in nickel and the insulation is made of Delrin, ensuring durability and reliable performance. The center contacts are gold-plated for low signal loss and corrosion resistance.</p><p>&nbsp;</p><p>Its free hanging (in-line) mounting type allows direct cable or panel extension without additional hardware. The fastening type is threaded on both sides, providing a secure, vibration-resistant connection in RF systems.</p>

<p>The Amphenol RF 031-6499 is a TNC plug, male pin coaxial connector designed for 50 Ohm systems. It supports frequencies up to 6 GHz and features a threaded fastening type for secure connections. The contact termination is solder, while the shield termination is crimp, making it suitable for cable groups such as Belden 7807A and LMR-200. The connector is rated IP67 for dust and water ingress protection, and operates over a temperature range of -40°C to +85°C. The housing is silver, with center contact materials of beryllium copper and brass. It has a durability of 500 mating cycles and a dielectric withstanding voltage of 1000 Vrms.</p>

<p>The 132246 is a coaxial RF connector from Amphenol RF, featuring an SMA jack with a female socket. It is designed for a 50 Ohm impedance and operates up to 12.4 GHz. The connector has a right angle orientation and is panel mounted with a bulkhead front side nut for secure installation. The center contact is made of beryllium copper and terminated with solder, while the shield is terminated via crimp. The housing is gold-plated. This connector is compatible with a variety of cables including RG-58, 58A, 58B, 58C, 141, 303, LMR-195, and Belden B7806A, 9907. It is a single-port, threaded fastening design suitable for demanding RF applications.</p>

<p>The Amphenol RF 132123RP is an RP-SMA plug connector featuring a female socket contact and right-angle body orientation. It is designed for 50 Ohm impedance systems and supports a maximum operating frequency of 12.4 GHz. The connector uses a threaded fastening mechanism for secure mating and is rated as weatherproof for outdoor or harsh environment use.</p><p>&nbsp;</p><p>The center contact is made of beryllium copper and terminated via solder, while the shield is terminated using a crimp method. The connector is compatible with a wide range of flexible coaxial cables including RG-174, RG-188, RG-188A, RG-316, LMR-100, and M17/119-RG174. The gold-plated housing provides corrosion resistance and reliable electrical performance.</p><p>&nbsp;</p><p>This connector is a free-hanging (in-line) right-angle design, making it suitable for applications where space constraints require a low-profile connection. It is commonly used in RF modules, antennas, wireless infrastructure, and test equipment where RP-SMA interfaces are specified.</p>

<p>The Amphenol RF 122408 is a TNC plug, male pin coaxial connector designed for 50 Ohm systems. It is built for free-hanging (in-line) mounting using a threaded fastening type for reliable, vibration-resistant connections.</p><p>&nbsp;</p><p>The connector supports a broad frequency range up to 11 GHz, making it suitable for RF and wireless applications. It features both contact and shield crimp termination, providing consistent electrical performance and ease of assembly.</p><p>&nbsp;</p><p>The center contact is made of brass with a silver-plated housing. It is compatible with cable groups RG-8X, Belden 9258, and LMR-240. The single-port design is common for cable-end terminations in antenna feeds and test equipment.</p>

<p>The Amphenol RF 031-5640 is a 50 Ohm BNC jack connector with a female socket contact. It features a right angle orientation for through hole PCB mounting and includes a bulkhead front side nut for panel mounting. The connector uses a bayonet lock fastening type and solder terminations for both the contact and shield.</p><p>&nbsp;</p><p>Electrical specifications include a characteristic impedance of 50 Ohms, a frequency range from DC to 1 GHz, and a dielectric withstanding voltage of 1500 Vrms. The body is zinc die cast with nickel plating, the center contact is phosphor bronze with gold plating at the contact area, and the insulator is polypropylene.</p><p>&nbsp;</p><p>Mechanical durability is rated for 500 mating cycles, and the operating temperature range is -55°C to 85°C. The connector is packaged in a tray with a standard quantity of 40 pieces.</p>

<p>The 031-70547-12G is a BNC coaxial connector from Amphenol RF featuring a jack, female socket configuration with 75 Ohm impedance. It is designed for use with Belden 4694R cable and supports frequencies up to 12 GHz.</p><p>&nbsp;</p><p>This connector uses crimp termination for both the center contact and shield, ensuring reliable electrical and mechanical connections. The center contact is made of phosphor bronze, and the housing has a silver finish. Fastening is via a bayonet lock, and the mounting type is free hanging (in-line).</p><p>&nbsp;</p><p>Typical applications include RF signal transmission in broadcast, telecommunications, and test equipment where 75 Ohm impedance is required. The connector offers a single port and is suitable for environments demanding consistent high-frequency performance.</p>

<p>The Amphenol RF 122108RP is a RP-TNC (Reverse Polarity TNC) plug connector designed for 50 Ohm RF applications. It features a threaded fastening mechanism for secure connections and supports frequencies up to 11 GHz. The connector is terminated via crimp for both contact and shield, ensuring reliable electrical performance.</p><p>&nbsp;</p><p>This connector is suitable for use with RG-58 and similar cable types including LMR-195 and Belden 7806A/9907. The free hanging (in-line) mounting style allows for easy integration into cable assemblies. The housing is silver in color and the center contact is made of phosphor bronze.</p><p>&nbsp;</p><p>The RP-TNC interface is commonly used in wireless communication systems, antennas, and test equipment where reverse polarity is required to comply with regulations. The 50 Ohm impedance matches standard RF system requirements.</p>

<p>The Amphenol RF 112538 is a BNC jack connector designed for printed circuit board applications. It features a female socket contact and offers a characteristic impedance of 50 Ohm, making it suitable for RF and telecommunication systems. The connector operates up to a maximum frequency of 4 GHz.</p><p>&nbsp;</p><p>Mounting is through hole with solder terminations for both the center contact and shield, ensuring a reliable connection. The bayonet lock fastening type provides secure mating and quick disconnect. The housing is finished in silver, and the center contact is made from phosphor bronze for durability.</p><p>&nbsp;</p><p>This connector is typically used in test equipment, instrumentation, and telecommunications infrastructure where reliable signal integrity is required.</p>

<p>The 901-144-8RFX is an SMA PCB receptacle jack from Amphenol RF. It features a female socket contact with 50 Ohm impedance and supports frequencies up to 18 GHz. The connector uses a threaded fastening type for secure mating.</p><p>&nbsp;</p><p>The body is made of brass with a gold plated finish, and the center contact is beryllium copper. It has four blunt post legs for through hole mounting and solder termination for both contact and shield. The housing color is gold.</p><p>&nbsp;</p><p>This connector is suitable for RF applications requiring a reliable 50 Ohm interface up to 18 GHz. Its through hole design allows for robust PCB attachment.</p>

<p>The Amphenol RF 172148 is an N Type coaxial connector designed for use with RG-8X, Belden 9258, and LMR-240 cables. It is a jack with a female socket contact, offering 50 Ohm impedance and a frequency rating of 11 GHz. The connector features a crimp termination for both center contact and shield, ensuring reliable electrical and mechanical connections. The housing is silver-colored and the center contact is made of phosphor bronze. The fastening type is threaded, providing secure mating. The mounting type is free hanging (in-line), suitable for cable assembly applications. This connector is RoHS3 compliant and has an MSL of Level 1 (unlimited). It is commonly used in RF and telecommunications systems where high-frequency performance is required.</p>

<p>This Amphenol RF 31-71008-RFX is a BNC plug connector designed for 75 Ohm coaxial cables. It features a male pin center contact and uses crimp termination for both the center conductor and shield, ensuring a reliable connection. The connector is equipped with a bayonet lock fastening mechanism for secure mating. It is intended for free hanging (in-line) mounting and supports a frequency range up to 2 GHz. The housing is silver in color, and the center contact is made of brass. Compatible cable groups include RG-59, RG-59B, RG-62, RG-140, RG-210, and Belden 8241, 8263, 8279, 9209.</p>