Amphenol RF

<p>The Amphenol RF 112119 is a BNC plug connector with a male pin contact, designed for 75 Ohm impedance systems. It supports frequencies up to 4 GHz, making it suitable for video, broadcast, and telecommunications applications.</p><p>&nbsp;</p><p>The connector features a bayonet lock fastening mechanism for quick and secure connections. Both the center contact and shield are terminated using crimp method, providing reliable and repeatable electrical performance. The center contact is made of brass.</p><p>&nbsp;</p><p>This connector is designed for free hanging (in-line) mounting and accommodates cable groups including RG-59, 59B, 62, 140, 210, Belden 8241, 8263, 8279, and 9209. The housing is silver in color.</p>

<p>The A-1PL-081-300B2 is a 300mm (11.811") coaxial cable assembly from Amphenol RF featuring U.FL (UMCC), AMC plugs on both ends. Both connectors are right-angle, female contact, free-hanging (in-line) mounting type. The cable uses 0.81mm OD coaxial cable and is shielded for EMI protection.</p><p>&nbsp;</p><p>This assembly is designed for 50 Ohm characteristic impedance and supports frequencies up to 6 GHz, making it suitable for RF interconnects in wireless modules, GPS antennas, and other high-frequency applications. The operating temperature range is -40°C to 90°C.</p><p>&nbsp;</p><p>The black cable jacket and compact connector design allow for routing in tight spaces. The assembly is RoHS3 compliant and REACH unaffected (unverified).</p>

<p>The A-1PL-081-100B2 is a coaxial cable assembly from Amphenol RF designed for U.FL (UMCC) connections. It features U.FL (UMCC), AMC plug, right angle connectors on both ends, with female contacts. The cable is 0.81mm OD coaxial cable, 100mm (3.937 inches) in length, and shielded for EMI protection. This assembly is rated for 50 Ohms impedance and supports frequencies up to 6 GHz. It operates over a temperature range of -40°C to 90°C. The connectors are free hanging (in-line) mounting type, making it suitable for internal RF connections in compact devices.</p>

<p>The Amphenol RF A-1PL-081-01KB2 is a 50Ω coaxial cable assembly featuring U.FL (UMCC) and AMC plug connectors on both ends, each right-angle and female gender. The cable is 0.81mm OD, shielded, and black in color, with a length of 1.0 meter (39.4 inches).</p><p>&nbsp;</p><p>This assembly is designed for RF signal transmission up to 6 GHz, making it suitable for high-frequency interconnect applications. Both connectors are free-hanging (in-line) mounting type, providing flexibility in tight spaces.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 90°C, allowing use in a variety of environments. The cable is shielded to minimize electromagnetic interference, ensuring signal integrity.</p>

<p>The 034-1061 is a high-density BNC (HD-BNC) plug connector from Amphenol RF, designed for 75 Ohm systems. It features a male pin contact and supports frequencies up to 4 GHz, making it suitable for broadcast video, telecom, and high-frequency test applications.</p><p>&nbsp;</p><p>This connector uses a bayonet lock fastening mechanism for quick and secure connections. Both the center contact and shield are terminated via crimp, ensuring reliable electrical performance and mechanical integrity. The center contact is made of phosphor bronze for durability and conductivity.</p><p>&nbsp;</p><p>The mounting style is free hanging (in-line) with a right angle orientation, allowing flexible cable routing. It is compatible with cable groups RG-179 and Belden 179DT. The housing is silver in color.</p>

<p>The Amphenol RF A-1PL-081-500B2 is a 50 Ohm coaxial cable assembly designed for RF interconnects. It features U.FL (UMCC) right-angle plugs on both ends, with female contacts, and uses a 0.81mm OD coaxial cable. The assembly is shielded for signal integrity and operates over a frequency range up to 6 GHz.</p><p>&nbsp;</p><p>The cable is 500.00mm (19.69 inches) long and comes in a black jacket. It is rated for an operating temperature range of -40°C to 90°C. Both connectors are free-hanging (in-line) mounting type, making it suitable for board-to-board or module-to-module connections in compact RF systems.</p><p>&nbsp;</p><p>This assembly is commonly used in wireless modules, GPS receivers, and other RF applications requiring a low-profile, high-frequency interconnect.</p>

<p>The Amphenol RF A-1PL-081-250B2 is a 50Ω coaxial cable assembly designed for RF interconnections. It features U.FL (UMCC), AMC right-angle plugs on both ends, with female contacts, and uses a 0.81mm OD coaxial cable. The assembly is shielded for signal integrity and supports frequencies up to 6 GHz.</p><p>&nbsp;</p><p>The cable is 250.00mm (9.843 inches) long and is black in color. Both connectors are free-hanging (in-line) mounting type, making it suitable for internal point-to-point connections in compact RF modules, wireless devices, and antenna systems.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 90°C, allowing use in a variety of environments. The assembly is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited).</p>

<p>The A-1PL-081-200B2 is a coaxial cable assembly manufactured by Amphenol RF, featuring U.FL (UMCC) connectors on both ends. The connectors are female gender, right angle plug style, and are free hanging (in-line) mounting type. The cable uses 0.81mm OD coaxial cable and is shielded.</p><p>&nbsp;</p><p>This assembly is designed for RF applications requiring a 50 Ohm impedance and supports frequencies up to 6 GHz. The operating temperature range is -40°C to 90°C. The cable is black in color and has a length of 200.00mm (7.874 inches).</p><p>&nbsp;</p><p>With its compact U.FL connectors and flexible coaxial cable, this assembly is suitable for internal wiring in wireless devices, GPS modules, and other RF systems where space is limited. The shielded construction helps reduce electromagnetic interference.</p>

<p>The 095-666-50056-5 is a coaxial cable assembly manufactured by Amphenol RF. This assembly features a U.FL (UMCC), AMC plug, right angle connector on one end and an unterminated round cable on the other end, making it suitable for internal RF interconnects in compact electronic devices.</p><p>&nbsp;</p><p>The cable uses 1.13mm OD coaxial cable, providing a 50 Ohm characteristic impedance with a maximum operating frequency of 6 GHz. The overall length is 356.00mm (14.02 inches). The assembly is rated for operation over a temperature range of -40°C to +90°C.</p><p>&nbsp;</p><p>The 1st connector is a free-hanging (in-line) right-angle plug with a female contact. The assembly is supplied in a single pack bag and is RoHS3 compliant with MSL 1 (unlimited) and REACH unaffected status.</p>

<p>The Amphenol RF 132113 is an SMA plug, male pin coaxial connector designed for 50 Ohm impedance systems. It operates up to 12.4 GHz, making it suitable for a wide range of RF applications including telecommunications, test equipment, and wireless infrastructure.</p><p>&nbsp;</p><p>This connector features a free hanging (in-line) mounting style with threaded coupling for secure connections. The center contact is made of brass and terminated via solder, while the shield is terminated via crimp. The gold-plated housing provides corrosion resistance and reliable electrical performance.</p><p>&nbsp;</p><p>Compatible with cable groups RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907, this connector offers flexibility for various cabling needs. It is a single-port device, ideal for point-to-point RF connections.</p>

<p>The Amphenol RF 132231 is an SMA plug, male pin coaxial connector designed for 50 Ohm systems. It supports frequencies up to 12.4 GHz, making it suitable for a variety of RF and microwave applications.</p><p>&nbsp;</p><p>The connector features a threaded fastening mechanism for secure mating, and the contact termination is solder type while the shield termination is crimp. It is designed for free hanging (in-line) mounting and accommodates cable groups RG-8X, Belden 9258, and LMR-240.</p><p>&nbsp;</p><p>The center contact is made of brass, and the housing has a gold color. This single-port connector is intended for use in telecommunications, test equipment, and other RF interconnect systems.</p>

<p>The Amphenol RF 142210-75 is a Mini SMB coaxial connector receptacle with a male pin contact center. It is designed for 75 Ohm impedance systems and features a snap-on fastening type for quick and secure mating.</p><p>&nbsp;</p><p>Mechanically, the connector is panel mounted with through hole solder termination for both the center contact and shield. The center contact is made of beryllium copper and the housing is gold plated. The mounting feature is bulkhead with a front side nut.</p><p>&nbsp;</p><p>This connector is intended for RF signal applications where a compact, 75 Ohm interface is required. The single-port design with solder terminations supports reliable connections in coaxial cable assemblies.</p>

<p>The Amphenol RF 172243 is an N Type coaxial connector receptacle with a female socket contact. It is designed for 50 Ohm impedance and supports frequencies up to 11 GHz, making it suitable for RF applications requiring reliable signal integrity.</p><p>&nbsp;</p><p>The connector features a panel mount, through hole mounting style with a bulkhead front side nut fastening mechanism. The center contact is made of beryllium copper, and both the contact and shield are terminated via solder. The housing is silver in color and the connector is rated as weatherproof, providing environmental protection.</p><p>&nbsp;</p><p>This single-port receptacle uses a threaded coupling mechanism for secure mating. It is commonly used in telecommunications, test equipment, and other RF systems where a robust N Type interface is required.</p>

<p>The Amphenol RF 242122 is a between-series coaxial adapter designed to connect an N-type plug (male pin) to a BNC plug (male pin). It features a straight body style and supports a 50 Ohm impedance with a maximum operating frequency of 4 GHz. The adapter uses a bayonet lock on the BNC end and a threaded fastening on the N end, ensuring secure connections in RF systems.</p><p>&nbsp;</p><p>This plug-to-plug adapter is free hanging (in-line) and does not require a panel or board mount. The center contacts are gold plated for reliable signal integrity and corrosion resistance. It is suitable for applications requiring interconnection between N-type and BNC interfaces in 50 Ohm systems up to 4 GHz.</p>

<p>The Amphenol RF 242101 is a between-series coaxial adapter that converts a BNC plug (male pin) to an N jack (female socket). It features a straight body style and is designed for free hanging (in-line) mounting.</p><p>&nbsp;</p><p>This adapter supports 50 Ohm impedance and operates up to 4 GHz, making it suitable for RF signal routing and test equipment connections. The BNC end uses a bayonet lock fastening, while the N end uses threaded coupling for secure connections.</p><p>&nbsp;</p><p>Center contacts are gold plated for reliable conductivity and corrosion resistance. The adapter is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The Amphenol RF 031-71008-2000 is a BNC plug connector designed for 75 Ohm coaxial cable systems. It features a male pin center contact made of brass and a silver-plated housing. The connector supports frequencies up to 2 GHz and uses a bayonet lock fastening mechanism for secure connections.</p><p>&nbsp;</p><p>Termination is accomplished via crimp for both the center contact and shield, ensuring reliable electrical and mechanical connections. The connector is intended for free hanging (in-line) mounting and is compatible with RG-59 plenum cable as well as Belden 82108, 82259, 89108, and 89259 cable types.</p><p>&nbsp;</p><p>This single-port connector is suitable for RF applications requiring 75 Ohm impedance matching. The RoHS3 compliance status is reported but unverified.</p>

<p>The 132134RP is an RP-SMA (Reverse Polarity SMA) jack connector manufactured by Amphenol RF. It features a male pin center contact and is designed for 50 Ohm impedance systems. The connector operates from DC to 18 GHz, making it suitable for a wide range of RF applications.</p><p>&nbsp;</p><p>Electrical specifications include a dielectric withstanding voltage of 1000 V RMS. The connector is rated for 500 mating cycles and operates over a temperature range of -65°C to +165°C. The body is made of brass with gold plating, the center contact is brass with gold plating, and the insulator is PTFE (natural).</p><p>&nbsp;</p><p>Mechanical characteristics include through hole mounting, threaded fastening (1/4-36 UNS-2A thread), and solder termination for both contact and shield. The connector has a single port and is gold in color.</p><p>&nbsp;</p><p>This connector is suitable for PCB mounting in RF modules, antennas, and test equipment where reverse polarity SMA interface is required. The gold plating ensures good conductivity and corrosion resistance.</p>

<p>The Amphenol RF 920-506A-51S is a straight coaxial adapter designed for HD-EFI series connections. It features a plug to plug configuration with female to female center gender and snap-on fastening on both ends. The adapter operates at 50 Ohm impedance and supports frequencies up to 6 GHz. The center contacts are gold plated for reliable signal integrity. The adapter is free hanging (in-line) mount type, making it suitable for cable-to-cable or cable-to-component connections in RF systems.</p>

<p>The Amphenol RF 031-6506 is an RP-TNC (Reverse Polarity TNC) jack, male pin coaxial connector designed for 50 Ohm impedance systems. It supports frequencies up to 6 GHz, making it suitable for a wide range of RF applications including wireless infrastructure, antenna connections, and test equipment.</p><p>&nbsp;</p><p>This connector features a threaded fastening mechanism for secure mating and is rated IP67 for dust-tight and waterproof protection, ensuring reliable performance in harsh environments. The center contact is constructed from beryllium copper and brass, providing robust electrical and mechanical performance.</p><p>&nbsp;</p><p>Installation is straightforward with a solder contact termination and crimp shield termination, and the free hanging (in-line) mounting style allows for flexible cable assembly. It is compatible with Belden 7807A and LMR-200 cable groups.</p>

<p>This is an N Type coaxial connector (jack, female socket) from Amphenol RF, designed for 50 ohm systems. It supports frequencies up to 11 GHz and features a threaded fastening type for secure connection. The connector is panel mounted with a bulkhead front side nut, making it suitable for weatherproof installations. It accommodates cable groups such as RG-58, LMR-195, and Belden 9907. Contact and shield termination are both crimp style, using phosphor bronze center contact material. The housing is silver in color.</p>

<p>The Amphenol RF 132119RP is a reverse polarity SMA (RP-SMA) jack connector with a male pin center contact, designed for 50 Ohm impedance systems. This connector operates at frequencies up to 12.4 GHz, making it suitable for a wide range of RF and wireless applications.</p><p>&nbsp;</p><p>The connector features a threaded fastening mechanism for secure mating and is designed for panel mounting with a bulkhead front side nut. The center contact is made of brass with a gold finish, and contact termination is achieved via soldering. The shield termination uses a crimp method.</p><p>&nbsp;</p><p>This RP-SMA connector accommodates cable groups including RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174. The housing has a gold color finish and is weatherproof for outdoor or harsh environment use.</p>

<p>The 930-115P-51S is a QMA plug connector with male pin from Amphenol RF. It features a snap-on quick disconnect interface for fast installation and a 360-degree rotating coupling after connection. The connector uses a free hanging in-line mounting style with crimp or solder contact termination and crimp shield termination. Electrical specifications include 50 Ohm impedance, DC to 6 GHz frequency range, 150 W typical power handling at 2.5 GHz, and passive intermodulation of -120 dBc. The center contact is made of brass with silver plating, and the housing is silver. Mechanical characteristics include engagement force of 25 N typical, disengagement force of 20 N, and minimum retention force of 60 N. Durability is rated at 100 mating cycles minimum. Environmental rating covers -40°C to +85°C. This connector is compatible with RG-179, RG-188, RG-316 Double Braid, and M17/152-RD316 cables.</p>

<p>The 122192 is a TNC Jack, Female Socket coaxial connector from Amphenol RF. It features a 50 Ohm impedance and supports frequencies up to 11 GHz, making it suitable for a wide range of RF applications. The connector has a single port and utilizes a threaded fastening mechanism for secure connections.</p><p>&nbsp;</p><p>Mounting is panel mount with a bulkhead front side nut, providing robust installation. Both contact and shield terminations are crimp type, ensuring reliable wire connections. The center contact is made of phosphor bronze, and the housing is finished in silver.</p><p>&nbsp;</p><p>This connector is compatible with multiple cable groups including RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174. It is designed for use in coaxial cable assemblies where a durable, high-frequency connector is required.</p>

<p>The Amphenol RF 31-10 is a BNC connector assembly designed for RF applications. It features a jack, female socket configuration with 50 Ohm impedance and a frequency rating of 4 GHz. The connector uses a bayonet lock fastening mechanism and panel mount with bulkhead rear side nut mounting method. Contact termination is solder cup and shield termination is solder. The center contact material is phosphor bronze. Housing color is silver and white. This connector is isolated.</p><p>&nbsp;</p><p>It is RoHS3 compliant and REACH unaffected. Moisture sensitivity level is 1 (unlimited). The connector is intended for use in telecommunications, test equipment, and broadcast applications where reliable 50 Ohm connections are required.</p>

<p>This is an SMA coaxial adapter from Amphenol RF, part number 132169. It is a same-series adapter converting between two SMA jacks, both with female center sockets. The adapter has a straight body style and is designed for free hanging (in-line) mounting.</p><p>&nbsp;</p><p>Electrical specifications include a characteristic impedance of 50 Ohms and a maximum operating frequency of 18 GHz. The adapter uses threaded coupling on both ends for secure connections. Center contacts are gold plated for reliable conductivity.</p><p>&nbsp;</p><p>The adapter is suitable for RF applications requiring a gender change or extension within SMA systems. Its compact straight design allows for easy integration into cable assemblies or test setups.</p>

<p>The 901-10588 is an SMA coaxial connector plug with a male pin contact from Amphenol RF. It features a threaded fastening type for secure connections and is designed for board edge or end launch mounting. The connector offers a 50 Ohm impedance and supports frequencies up to 26.5 GHz.</p><p>&nbsp;</p><p>The center contact is made of beryllium copper, and both the contact and shield terminations are solder type. The housing has a gold color finish. This connector is suitable for RF applications requiring a reliable 50 Ohm interface in a compact edge-mount form factor.</p>

<p>The Amphenol RF 082-6650 is an N Type coaxial connector assembly designed for field installation. It features a plug with male pin center contact, 50 Ohm impedance, and supports frequencies up to 6 GHz. The connector uses a threaded fastening mechanism and clamp shield termination for secure cable attachment.</p><p>&nbsp;</p><p>This connector is rated IP67 for dust tight and waterproof protection, making it suitable for outdoor or harsh environment RF applications. The center contact is made of beryllium copper, and the housing has a silver color. It is designed for use with LMR-400 cable group.</p><p>&nbsp;</p><p>The free hanging (in-line) mounting style allows for easy integration into cable assemblies. The field installable feature simplifies on-site termination without specialized tooling. This connector is commonly used in wireless communication systems, antenna connections, and other RF infrastructure.</p>

<p>The Amphenol RF 132368 is an SMA plug coaxial connector assembly designed for reliable high-frequency signal transmission. It features a male pin center contact made of brass and a gold-plated housing. The connector offers a 50 Ohm characteristic impedance and supports frequencies up to 12.4 GHz, making it suitable for RF applications.</p><p>&nbsp;</p><p>This connector uses a threaded coupling mechanism for secure mating and a crimp termination for both the center contact and shield, simplifying field installation. It is designed for free-hanging (in-line) mounting and accommodates RG-8, RG-213, and RG-393 cable types.</p><p>&nbsp;</p><p>The robust brass construction with gold plating provides excellent conductivity and corrosion resistance. This SMA plug is commonly used in telecommunications, test equipment, and wireless infrastructure where consistent RF performance is required.</p>

<p>The Amphenol RF 172206 is a straight N Type plug connector designed for coaxial cable applications. Featuring a male pin center contact, this connector provides a threaded fastening mechanism for secure mating. The center contact is made of brass and terminated via solder, while the outer shield is terminated by crimp, ensuring reliable electrical and mechanical connections. Rated for a characteristic impedance of 50 Ohm with a maximum frequency of 11 GHz, this connector is suitable for RF signal transmission. It is a free-hanging (in-line) mounting style with a silver housing color. The connector is designed for use with LMR-600 cable group and has a single port.</p>

<p>The Amphenol RF 172120 is an N Type coaxial connector plug featuring a male pin contact. It is designed for solder termination on both the contact and shield, ensuring reliable electrical connections. The connector is free hanging (in-line) with a flange mounting feature, and it uses a push-pull fastening mechanism for secure mating.</p><p>&nbsp;</p><p>This connector is constructed with a silver-colored housing and a beryllium copper center contact, providing good conductivity and corrosion resistance. It is a single-port, 1-position connector suitable for a variety of RF coaxial applications. The push-pull fastening type allows for quick and easy connection and disconnection.</p><p>&nbsp;</p><p>Typical applications include RF communication systems, antenna connections, test and measurement equipment, and broadcast or telecommunications infrastructure. The solder termination method is well-suited for custom cable assembly in prototyping and production environments.</p>

<p>The Amphenol RF 142134 is an SMB plug connector designed for RF applications. It features a female socket contact and a 50 ohm characteristic impedance, supporting frequencies up to 4 GHz. The connector uses a snap-on fastening mechanism for quick and secure connections. It is designed for through hole mounting with solder termination for both the center contact and shield. The center contact is made of brass, and the housing is gold plated for corrosion resistance and reliable electrical performance. This single-port connector is suitable for PCB integration in communication systems, test equipment, and wireless modules.</p>

<p>The 142146 is an SMB right angle jack connector manufactured by Amphenol RF. It is designed for through hole PCB mounting with solder termination for both contact and shield. The connector features a snap-on fastening type and a single port configuration.</p><p>&nbsp;</p><p>Electrical specifications include 50 Ohm nominal impedance, a maximum frequency of 4 GHz, VSWR of 1.200 max, and return loss of -20.8 dB max. The dielectric withstanding voltage is 1000 VRMS. The operating temperature range is -65°C to +165°C.</p><p>&nbsp;</p><p>The connector body and center contact are made of brass with gold plating, and the insulator is PTFE. It is rated for 500 mating cycles minimum.</p><p>&nbsp;</p><p>This connector is suitable for RF applications requiring reliable performance up to 4 GHz.</p>

<p>The Amphenol RF 901-171 is a between-series coaxial adapter designed to interconnect SMA and TNC interfaces. It converts from an SMA Jack (female socket) to a TNC Jack (female socket) with a straight inline body style.</p><p>&nbsp;</p><p>This adapter offers 50 Ohm characteristic impedance and supports frequencies up to 11 GHz, making it suitable for RF and wireless applications. The center contacts are female to female with gold plating for reliable signal integrity and corrosion resistance. Both ends feature threaded coupling for secure mechanical connections.</p><p>&nbsp;</p><p>The adapter is free hanging (in-line) mounted and straight in orientation. It is built for general-purpose RF interconnect needs where conversion between SMA and TNC series connectors is required.</p>

<p>The Amphenol RF 142255 is a 50 Ohm SMB plug connector featuring a female socket center contact. It is designed for use with RG-58 and compatible cables, offering a snap-on fastening mechanism for secure connections.</p><p>&nbsp;</p><p>This connector supports frequencies up to 4 GHz and is terminated via solder for the center contact and crimp for the shield. The center contact is made of beryllium copper for reliability.</p><p>&nbsp;</p><p>The housing is gold in color and the connector is free hanging, suitable for in-line applications. It is a single-port connector.</p>

<p>The APH-NJ-HDBNCJ is a between-series coaxial adapter from Amphenol RF, converting from a BNC HD jack to an N jack. It features a straight body style with female to female center contacts, designed for free hanging (in-line) mounting. The adapter offers a 75 Ohm impedance and supports frequencies up to 4 GHz, making it suitable for high-frequency RF applications. Fastening is achieved via bayonet lock on the BNC HD side and threaded on the N side, ensuring secure connections. Center contacts are gold plated for reliable conductivity and corrosion resistance. This adapter is commonly used in broadcast, telecommunications, and test equipment where BNC HD and N interfaces need to be interconnected.</p>

<p>The Amphenol RF 031-220N-75-12G is a straight BNC to BNC adapter designed for 75 Ohm systems. It features female to female center gender, allowing connection of two male BNC cables or devices. The adapter supports frequencies up to 12 GHz, making it suitable for high-speed RF applications.</p><p>&nbsp;</p><p>Both ends utilize bayonet lock fastening for quick and secure connections. The adapter is panel mount with a bulkhead mounting feature, enabling installation through a panel or chassis. Center contacts are gold plated for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This same-series adapter converts between standard BNC and BNC HD interfaces, maintaining signal integrity across the connection. It is commonly used in telecommunications, video surveillance, and test equipment where 75 Ohm impedance is required.</p>

<p>The 142186 is an SMB coaxial connector assembly from Amphenol RF. This plug features a female socket contact with beryllium copper center contact material and gold housing color. Rated for 50 Ohm impedance with a frequency range up to 4 GHz.</p><p>&nbsp;</p><p>Designed for free hanging (in-line) mounting, the connector uses solder contact termination and a crimp shield termination. The snap-on fastening type provides secure mating. This connector is suitable for cable groups including RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174.</p><p>&nbsp;</p><p>As a single-port coaxial connector, it is well suited for RF signal connections in telecommunications, instrumentation, and test equipment applications where quick-connect/disconnect is desired.</p>

<p>The Amphenol RF 132168 is a coaxial adapter designed for same-series SMA connections. It features a plug-to-plug configuration with male pin center contacts on both ends, enabling direct in-line mating of two SMA male connectors.</p><p>&nbsp;</p><p>This adapter supports 50 Ohm impedance and operates up to 18 GHz, making it suitable for RF test and measurement setups, telecommunications equipment, and other high-frequency applications. The straight body style and threaded fastening provide a secure, reliable connection.</p><p>&nbsp;</p><p>The adapter is free-hanging (in-line) with no mounting required. Center contacts are gold plated for low resistance and corrosion resistance.</p>

<p>The Amphenol RF 132298 is an SMA plug connector designed for use with cables such as Belden 9913, 9914, and LMR-400. It features a male pin center contact made of brass with a gold housing color. This connector offers a 50 Ohm impedance rating and operates at frequencies up to 12.4 GHz. It uses a threaded fastening mechanism for secure connections and both the contact and shield are terminated via crimp. The connector is designed for free hanging (in-line) mounting and has a single port.</p>

<p>The Amphenol RF 132203 is an SMA right angle jack connector designed for PCB mounting through a panel bulkhead. It offers a 50 Ohm impedance and operates from DC to 12.4 GHz, making it suitable for a wide range of RF applications. The connector uses threaded fastening and a gold-plated brass housing with a PTFE natural insulator.</p><p>&nbsp;</p><p>Electrical characteristics include a minimum dielectric withstanding voltage of 500 VRMS. Mechanical durability is rated for a minimum of 500 mating cycles. The center contact is made of beryllium copper with gold plating, while the housing, nut, and lock washer are gold-plated brass.</p><p>&nbsp;</p><p>Mounting is via panel mount with a bulkhead front side nut, through hole solder contacts, and right angle orientation. The maximum panel thickness is 2.4 mm. Operating temperature range spans -65°C to +165°C.</p>

<p>The Amphenol RF 31-221 is a BNC coaxial connector jack with a female socket interface. It is designed for 50 Ohm systems and supports frequencies up to 4 GHz, making it suitable for a wide range of RF applications.</p><p>&nbsp;</p><p>The connector features a panel mount with bulkhead rear side nut for secure installation. The bayonet lock fastening ensures reliable mating, while the solder cup contact termination and solder shield termination provide straightforward assembly. The housing is silver and the center contact is made of beryllium copper.</p><p>&nbsp;</p><p>This connector includes extended insulation for added protection. It is RoHS3 compliant and has an MSL of 1 (unlimited). The single port design is typical for standard BNC applications.</p>

<p>The Amphenol RF 172102H243RP is an RP-N Type plug connector designed for use with Belden 9913, 9914, and LMR-400 cable groups. This connector features a female socket contact and a threaded fastening mechanism for secure connections.</p><p>&nbsp;</p><p>With a characteristic impedance of 50 Ohms and a maximum operating frequency of 11 GHz, this connector is suitable for high-frequency RF applications. The center contact is made of phosphor bronze, and both the contact and shield terminations use a crimp style for reliable cable attachment.</p><p>&nbsp;</p><p>The housing has a silver color and the mounting type is free hanging (in-line), allowing for easy installation on cable runs. The connector has 1 port and is built for durable, consistent performance in RF interconnect systems.</p>

<p>This BNC T-shape adapter from Amphenol RF provides a dual female jack configuration with 75 Ohm impedance, suitable for use in RF systems up to 2 GHz. The adapter features a free hanging (in-line) mounting style and bayonet lock coupling for quick and reliable connections. Center contacts are gold plated to ensure low signal loss and corrosion resistance. Designed as a same-series BNC to BNC adapter, it is ideal for splitting or combining coaxial signals in 75 Ohm video, telecom, and test equipment applications. The T-shape allows convenient tapping of signals without additional cabling.</p>

<p>The Amphenol RF 901-9892-RFX is an SMA coaxial connector designed for reliable RF signal transmission. It is a receptacle with a female socket contact, offering a characteristic impedance of 50 Ohms and supporting frequencies up to 18 GHz. The connector uses a threaded fastening mechanism for secure mating.</p><p>&nbsp;</p><p>This connector is designed for panel mount installation with a flange mounting feature. The center contact is made of beryllium copper, and the housing has a silver color. Contact termination is via a solder cup, and the shield is terminated by soldering.</p><p>&nbsp;</p><p>The 901-9892-RFX is suitable for various RF applications requiring a robust, threaded SMA interface. Its 50 Ohm impedance makes it compatible with standard RF systems and test equipment.</p>