Hirose Electric

<p>The Hirose DF17(1.0H)-26DP-0.5V(57) is a 26-position, 2-row surface mount header connector from the DF17 series. It features a 0.50mm pitch and outer shroud contacts, designed for board-to-board mezzanine stacking applications with a mated height of 4mm.</p><p>&nbsp;</p><p>This connector is RoHS3 compliant and operates with an MSL of 1 (unlimited floor life). Gold contact finish ensures reliable signal integrity over multiple mating cycles. The package includes board guide and solder retention features for secure placement during reflow soldering.</p><p>&nbsp;</p><p>The header measures 0.130" (3.30mm) above the board surface, making it suitable for compact electronic assemblies. Designed for surface mount technology (SMT) processing, it is ideal for high-density interconnects in consumer, industrial, and telecommunications equipment.</p>

<p>The HR25A-9R-16SA is a circular connector receptacle from Hirose Electric. It features 16 female socket contacts arranged in a shell size 9 housing. The connector is designed for panel mount applications with through-hole solder termination.</p><p>&nbsp;</p><p>The contacts are gold-plated for reliable conductivity and corrosion resistance. The connector is rated for a current of 1 A and voltage of 30VAC or 42VDC. It operates over a temperature range of -25°C to 85°C. The shell is made of zinc alloy with a nickel finish, giving it a silver color. The connector uses a push-pull fastening mechanism and is keyed for proper orientation.</p><p>&nbsp;</p><p>Mounting is achieved via a bulkhead rear side nut, allowing secure panel installation. The insulator material has a UL94 V-0 flammability rating. The connector is specified as RoHS3 compliant, REACH unaffected, and has an MSL of Level 1 (unlimited).</p>

<p>The DF63-2P-3.96DSA is a wire-to-board connector from Hirose's DF63 series, designed for internal power supply applications. It is a 2-position, single-row, through-hole header with a 3.96mm pitch. The connector features a shrouded 4-wall design that provides protection and prevents incorrect mating. It includes a latch holder for secure mating and a board guide for alignment. The header is rated for up to 15A when using 16 AWG wire, with lower ratings for smaller gauges. The operating temperature range is -55°C to 105°C. The insulation is black PBT glass-filled with UL94 V-0 flammability rating. Contacts are brass with tin finish. The termination is solder. This connector is suitable for potting up to 5mm and has a molded lance design to prevent tangled wires. It is RoHS3 and REACH compliant.</p>

<p>The FH35C-31S-0.3SHW(50) is a 31-position FPC connector from Hirose Electric's FH35C series. It features a 0.3mm pitch and a right angle surface mount design, making it suitable for compact, space-constrained PCB layouts. The connector uses a flip lock (backlock) actuator for secure cable retention and is compatible with 0.20mm thick FPC cables.</p><p>&nbsp;</p><p>Electrical specifications include a voltage rating of 30V. The housing is made of liquid crystal polymer (LCP) with a UL94 V-0 flammability rating, and the actuator is polyamide (nylon). Contacts are phosphor bronze with gold finish, providing reliable signal integrity. The operating temperature range is -55°C to +85°C.</p><p>&nbsp;</p><p>This connector is designed for applications requiring a low-profile, high-density interconnect solution. The right angle orientation and surface mount termination facilitate automated assembly. The tapered cable end type aids insertion.</p>

<p>The Hirose Electric A3C-14P-2DSA(30) is a rectangular connector header with male pins, designed for through hole mounting. It features 14 positions with a 2mm pitch, making it suitable for compact wire-to-board connections in various electronic applications.</p><p>&nbsp;</p><p>This connector is compliant with RoHS3 and REACH, and has a moisture sensitivity level of 1 (unlimited), indicating no special handling requirements. The through hole mounting style provides mechanical stability in PCB assemblies.</p><p>&nbsp;</p><p>As part of the A3C series from Hirose Electric, this header is designed for reliable signal transmission in industrial and consumer electronics. The 2mm pitch allows for space-saving designs while maintaining sufficient contact spacing for typical signal currents.</p>

<p>The Hirose HR10A-10R-12P(73) is a circular connector assembly from the HR10A series. It is a receptacle with 12 male pins arranged in a keyed orientation for proper alignment. The connector features a metal shell with nickel finish and zinc alloy material, providing durability. Contact finish is silver.</p><p>&nbsp;</p><p>The connector is rated for 2A current and 100VAC or 140VDC voltage. It is unshielded and has a push-pull fastening mechanism. The mounting type is panel mount with a bulkhead rear side nut feature. Termination is via solder cup.</p><p>&nbsp;</p><p>The operating temperature range is -25°C to 85°C. The insulation material has a flammability rating of UL94 V-0. This connector is suitable for various industrial and commercial applications requiring a reliable circular connection.</p>

<p>The JR13RK-5S from Hirose Electric is a circular connector receptacle designed for reliable signal and power connections. It features 5 female socket contacts arranged in a shell size 13 housing. The connector uses a solder cup termination style, allowing easy wire attachment without special tooling. It is panel mounted with a flange and secured via threaded coupling, ensuring a robust mechanical connection.</p><p>&nbsp;</p><p>The shell is made of aluminum alloy with a nickel finish, providing good corrosion resistance and a silver appearance. The contacts are also silver-plated for low resistance. The connector is unshielded and keyed for proper orientation. It is rated for 5A current and can handle 250VAC or 350VDC, making it suitable for a variety of low-to-medium power applications.</p><p>&nbsp;</p><p>The operating temperature range is -25°C to 85°C, and the insulator material has a UL94 V-0 flammability rating. The cable opening accommodates up to 15.90 mm diameter cables. This connector is commonly used in industrial equipment, control panels, and automation systems where a compact, durable circular interface is required.</p>

<p>The DF9B-31S-1V(20) is a 31-position board-to-board receptacle from Hirose Electric's DF9 series. It features a 1.00mm pitch, 2-row configuration, and surface mount termination, making it suitable for compact mezzanine stacking applications with a mated stacking height of 4.3mm. The connector is compliant with the VESA FPDI-1 standard for flat panel display interfaces and includes an easy lock mechanism for secure mating and a trapezoidal structure to prevent mis-insertion.</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 0.5A per contact and a voltage rating of 150V AC. Contact resistance is maximum 50mΩ, and insulation resistance is minimum 500MΩ at 100V DC. The connector can operate over a temperature range of -45°C to +125°C and withstands 250V AC for 1 minute without flashover.</p><p>&nbsp;</p><p>Contacts are made of phosphor copper with a tin finish, and the insulator is polyamide rated UL94 V-0 for flammability. The design also includes solder retention features for reliable PCB mounting. Typical applications include LCD displays, mobile phones, notebook PCs, and other portable electronic devices requiring a compact board-to-board interconnection.</p>

<p>The DF3-6EP-2C is a plug housing from Hirose Electric's DF3 series. It accommodates 6 male pin contacts in a single row with 2.00mm pitch. Designed for crimp termination, it supports wire sizes 22-28 AWG.</p><p>&nbsp;</p><p>The housing is black and rated for operating temperatures from -30°C to +85°C. Electrical ratings include 3A current (AWG22-24) and 100V AC voltage. It has insulation resistance of 1000 MΩ minimum and withstanding voltage of 650V AC. Contact resistance is 30 mΩ maximum.</p><p>&nbsp;</p><p>The housing is UL (E52653) and CSA (LR95109) approved. It is suitable for business equipment like copiers and printers.</p>

<p>The Hirose Electric FX18-120S-0.8SH is a high-density board-to-board connector designed for mezzanine and parallel board stacking applications. This receptacle features 120 positions arranged in 2 rows with a fine 0.80mm pitch, enabling compact and space-efficient interconnects.</p><p>&nbsp;</p><p>The connector uses gold-plated contacts with a thickness of 4.00µin (0.100µm) for reliable signal integrity and corrosion resistance. It is surface mounted with a right-angle orientation, making it suitable for designs where board space is constrained. The connector includes a board guide feature to assist with alignment during assembly.</p><p>&nbsp;</p><p>With a height above board of 0.374" (9.50mm), this connector is appropriate for moderate stacking height requirements. The FX18 series is known for its robust construction and is commonly used in industrial, telecommunications, and computing equipment where dense signal routing is needed.</p>

<p>The Hirose Electric FH21-16S-1DSA is a 16 position, 1mm pitch FFC/FPC connector designed for vertical through hole mounting. It features a low insertion force (LIF) mechanism for easy cable insertion and a kinked pin termination that prevents connector floating during soldering. The contact structure on both sides accepts FPC and FFC conductors without restricting directionality.</p><p>&nbsp;</p><p>Electrical ratings include a rated current of 0.5A and a rated voltage of 50V AC. Contact resistance is 40mΩ maximum measured at 100mA, insulation resistance is 500MΩ minimum at 100V DC, and the connector withstands 150V AC for 1 minute. The operating temperature range is -30°C to 70°C.</p><p>&nbsp;</p><p>The housing is made of polybutylene terephthalate (PBT) with a UL94 V-0 flammability rating. Contacts are phosphor bronze with solder plating. The connector accepts FPC/FFC cables with a thickness of 0.30mm and has a height above board of 5.80mm.</p>

<p>The FX8-60P-SV(91) is a surface mount header connector manufactured by Hirose Electric. It is designed for mezzanine (board-to-board) applications and belongs to the FX8 series. The connector has 60 positions arranged in 2 rows with a 0.6mm pitch, providing a compact interconnect solution. It features gold-plated contacts for reliable electrical performance and a board guide for ease of alignment during assembly. The connector has a height above board of 2.85mm and supports a mated stacking height of 3mm. This connector is suitable for use in various electronic devices requiring high-density board-to-board connections.</p>

<p>The Hirose DF20F-20DP-1H(59) is a 20-position, double-row, 1mm pitch pin header designed for board-to-cable connections. It features a right-angle surface mount termination with a shrouded 4-wall housing for secure mating. The natural polyamide insulator is rated UL94 V-0, and the phosphor bronze contacts have a tin finish with 1.00µm thickness.</p><p>&nbsp;</p><p>Electrical ratings include 1A per contact (AWG#28), 0.9A (AWG#30), and 0.7A (AWG#32) with a voltage rating of 100V AC. Contact resistance is 30mΩ max, insulation resistance is 500MΩ min, and withstanding voltage is 300V AC for 1 minute. The operating temperature range is -35°C to 85°C.</p><p>&nbsp;</p><p>This connector is suitable for low-profile applications in notebook PCs, small office automation equipment, portable devices, and other compact electronics requiring reliable wire-to-board interconnects.</p>

<p>The FX8-90P-SV(71) is a header connector with outer shroud contacts designed for board-to-board connections. It features 90 positions arranged in 2 rows with a pitch of 0.60mm (0.024 inches), making it suitable for high-density applications. The connector is surface mount with solder termination, and the contacts are finished with gold for reliable conductivity. The height above board is 2.85mm (0.112 inches) and the mated stacking height is 3mm, providing a low-profile connection. An integrated board guide assists in alignment during assembly. This connector is classified under the Arrays, Edge Type, Mezzanine (Board to Board) category.</p>

<p>The Hirose FX8C-80P-SV2(93) is a 80-position, 2-row surface mount header with outer shroud contacts, designed for board-to-board stacking applications. It features a 0.6mm pitch for high-density interconnects and a height above board of 6.45mm. Mated stacking heights of 7mm and 12mm are supported. The contacts are finished with gold for reliable electrical performance. A board guide feature aids in alignment during assembly. This connector is part of the FX8C series from Hirose Electric.</p>

<p>The Hirose FX8-90S-SV(21) is a 90-position receptacle connector from the FX8 series, featuring a 0.6mm pitch for high-density board-to-board connections. This surface mount connector is designed for mated stacking heights of 3mm or 4mm, making it suitable for compact electronic devices. The connector includes a board guide feature to assist during mating and ensures ±0.6mm self-alignment. Electrical specifications include a current rating of 0.4A per contact, a voltage rating of 100V AC, and a contact resistance of 45mΩ maximum. The operating temperature range is -55°C to +85°C, accommodating a wide variety of environments. The connector is supplied in tubes (not tape and reel). It is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified. The FX8 series is not mateable with the FX8C series. Common applications include notebook PCs, business equipment, and other devices requiring miniaturization and light weight. The connector's SMT coplanarity is maintained at ≤0.1mm for reliable soldering. The two-piece connection design enhances mating reliability.</p>

<p>The DF11G-10DP-2V(50) is a 10-position shrouded male pin header from Hirose Electric's DF11 series. It features a 2.00mm pitch with 2 rows arranged at 2.00mm row spacing. The connector is surface mount and terminated by solder, with a detent lock fastening type for secure mating. The housing is beige polyamide (PA, Nylon) with UL94 V-0 flammability rating. Contacts are brass with gold finish and circular shape. The connector includes board guide and solder retention features. Rated at 2A per contact and 250V, the part operates over -30°C to 85°C. It supports board-to-board or cable style connections.</p>

<p>The DF11-12DS-2DSA(06) is a 12-position receptacle connector from the Hirose Electric DF11 series. It features a 2.00mm pitch double-row design with a compact 5mm width, enabling space-saving on PCBs. The connector is through-hole mounted with both press-fit and solder termination options. It has a friction lock fastening type for secure mating. The contact finish is tin with a thickness of 0.203µm. The insulator is black and rated UL94 V-0.</p><p>&nbsp;</p><p>Electrical specifications include a current rating of 2A and voltage rating of 250V. Contact resistance is 30mΩ max at 100mA, and insulation resistance is 1000MΩ min at 500V DC. The withstanding voltage is 650V AC for 1 minute. Operating temperature range is -30°C to 85°C.</p><p>&nbsp;</p><p>The connector is suitable for board-to-board or cable applications. It supports mated stacking heights of 7.8mm and 8.45mm. The DF11 series is compliant with UL/CSA safety standards and offers a broad variation including crimping and insulation displacement connection methods. The design includes a rib to prevent mis-insertion and a simple lock.</p><p>&nbsp;</p><p>Typical applications include business equipment such as copiers and printers. The connector is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited).</p>

<p>The MS-162-HRMJ-1 from Hirose Electric is a between-series coaxial adapter designed to convert a coaxial switch plug (4mm plug diameter, male pin) to an SMA jack (female socket). This straight-style adapter features a push-pull fastening on the switch side and threaded fastening on the SMA side, ensuring secure connections in test and measurement setups.</p><p>&nbsp;</p><p>Electrical performance includes a 50 Ohm impedance and a frequency range from DC to 10 GHz. Typical insertion loss is 0.08 dB at 1 GHz and 0.12 dB at 2 GHz. Contact resistance is 100 mOhm maximum, insulation resistance is 1000 MOhm minimum, and the adapter withstands 100 V AC for one minute. The operating temperature range is -55°C to +85°C.</p><p>&nbsp;</p><p>Mechanically, the adapter supports 12,000 mating cycles and weighs only 0.044 g. Center contacts are gold-plated for reliable signal integrity. The part is packaged on tape and reel for automated assembly.</p>

<p>The Hirose MS-151C is a coaxial switch receptacle designed for RF applications requiring signal re-direction. It features a 50 Ohm impedance and supports frequencies up to 6 GHz, making it suitable for high-frequency wireless modules and equipment.</p><p>&nbsp;</p><p>This receptacle uses a snap-on fastening type and is mounted in a surface mount, right angle orientation. It includes an internal switch feature and is rated for 5000 mating cycles. The housing is black, and the center contact is made of phosphor bronze.</p><p>&nbsp;</p><p>Electrical ratings include a maximum current of 100 mA and a maximum voltage of 100 V DC. The connector is RoHS3 compliant and operates over a temperature range of -55°C to +85°C.</p>

<p>The Hirose HR10A-10P-12P is a high-performance miniature circular connector from the HR10 series. It features a plug with male pins in a shell size 10, accommodating 12 positions. The push-pull lock structure enables quick and easy mating and unmating, ideal for applications requiring frequent connections.</p><p>&nbsp;</p><p>Electrically, the connector is rated for 2 A continuous current and 100 VAC or 140 VDC. It provides a contact resistance of 10 mΩ maximum and insulation resistance of 1000 MΩ minimum, with a withstanding voltage of 300 VAC. The operating temperature range is -25 to +85 °C, making it suitable for a variety of environments.</p><p>&nbsp;</p><p>Mechanically, the connector uses a free hanging (in-line) mounting style and is keyed for orientation to prevent incorrect insertion. It supports up to 1000 mating cycles for reliable long-term use. The unshielded design is appropriate for general-purpose signal and power connections.</p><p>&nbsp;</p><p>The HR10A-10P-12P is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited). It is part of the HR10 series which, under appropriate pin assignment and cable assembly, can support Cat.5e 1 Gbps high-speed Ethernet transmission.</p>

<p>The BM22-4S-V(53) is a 4-position receptacle from the Hirose BM22 series, designed for board-to-FPC applications. It employs a 2-row layout with 2 signal and 2 power contacts, terminated via surface-mount solder attachment. Gold contact finish with 0.050µm thickness ensures reliable corrosion resistance and durability over repeated mating cycles.</p><p>&nbsp;</p><p>Electrical ratings include a signal current capacity of 0.3A per contact and a power contact rating of 4A, with a maximum working voltage of 50V. The operating temperature range spans -35°C to +85°C, suited for consumer electronics and portable devices. The insulation height is 0.9mm, and the mated stacking height matches at 0.9mm, enabling ultra-low-profile connections.</p><p>&nbsp;</p><p>Packaging supports pick-and-place assembly. The housing is black with a UL94 V-0 flammability rating, and a friction lock fastening feature secures the mating connector. RoHS3 compliant and REACH unaffected (unverified). Moisture sensitivity level is MSL 1 (unlimited floor life) for simplified handling during SMD reflow.</p>

<p>The DF13-20DP-1.25V(20) is a 20-position, 2-row surface mount header from Hirose Electric's DF13 series. It features a 1.25mm pitch and a shrouded 4-wall design with a detent lock fastening system for secure mating. The header is rated for 1A current and 150V AC voltage, with an operating temperature range of -35°C to 85°C.</p><p>&nbsp;</p><p>Designed for board-to-cable/wire applications, this connector includes board guide and solder retention features for reliable assembly. The insulation is beige polyamide (PA) nylon with a UL94 V-0 flammability rating. Contacts are brass with tin finish, and the header supports surface mount soldering termination.</p><p>&nbsp;</p><p>This component is suitable for miniature consumer electronics such as notebook PCs, mobile terminals, and video cameras, as noted in the DF13 series datasheet. The SMT header includes a metal fitting to prevent solder peeling, and the scoop-proof box structure prevents mis-insertion.</p>

<p>The TM2REA-1818(50) is a 3-port 6P6C modular connector jack from Hirose Electric. It features a right angle orientation with through hole mounting and solder termination. The connector is unshielded and has a tab direction up. Contacts are made of phosphor bronze with gold finish. The jack includes board lock and panel stops for secure mounting. It is RoHS3 and REACH compliant with an MSL of 1 (unlimited).</p>

<p>The DF1B-2S-2.5R is a receptacle housing designed for use with Hirose's DF1B series connectors. It accommodates female socket contacts and offers two positions with a single row configuration at a 2.50mm pitch. The housing is white in color and features a free hanging (in-line) mounting style. It is rated for an operating temperature range of -35°C to 85°C. The contacts are terminated via crimp or IDC methods, making it suitable for wire-to-board or wire-to-wire connections. This housing is RoHS3 compliant and REACH unaffected. It is commonly used in various electronic applications requiring a compact and reliable interconnection.</p>

<p>The Hirose DF40C-20DS-0.4V(51) is a 20 position receptacle connector featuring center strip contacts arranged in 2 rows with a 0.4mm pitch. This surface mount connector is designed for board-to-board mezzanine applications, providing a mated stacking height of 1.5mm. The contacts are finished with gold plating (2.00µin / 0.051µm) for reliable signal integrity and corrosion resistance. The connector body has a height above board of 1.45mm, making it suitable for compact electronic assemblies where space is at a premium. This part is part of the DF40 series from Hirose Electric, known for high-density interconnects. The connector is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited floor life). It is ideal for use in portable devices, consumer electronics, and other applications requiring a low-profile, high-density board-to-board connection.</p>

<p>The Hirose Electric JRC21BP-26S(31) is a circular connector plug designed for free hanging (in-line) mounting. It features 26 female socket contacts with solder cup termination, making it suitable for cable assembly applications. The connector uses a bayonet locking mechanism for secure mating and a shell size of 21.</p><p>&nbsp;</p><p>This connector is constructed with an aluminum alloy shell finished in nickel, providing durability and corrosion resistance. The contacts are finished with silver for good conductivity. It is rated for 5A current and 250VAC/350VDC voltage, with an operating temperature range of -25°C to 85°C. The part includes a backshell, cable clamp, coupling nut, and strain relief for cable management.</p><p>&nbsp;</p><p>The JRC21BP-26S(31) is keyed for orientation and unshielded. It has a material flammability rating of UL94 V-0. The cable opening is 0.480 inches (12.20mm). This connector is RoHS3 compliant, MSL 1, and REACH unaffected.</p>

<p>The Hirose ZX62D-AB-5P8 is a USB 2.0 Micro AB receptacle connector designed for surface mount, right angle mounting. It features a bottom mount, horizontal orientation and solder termination. This shielded connector has 5 contacts and a single port, supporting a current rating of 1A per contact and a voltage rating of 30VAC. It is designed for 10,000 mating cycles and operates over a temperature range of -30°C to 85°C. The connector includes pick and place and solder retention features for automated assembly.</p>

<p>The FH28-15S-0.5SH(10) is a 15-position, 0.5mm pitch FFC (Flat Flexible Cable) / FPC (Flexible Printed Circuit) connector from Hirose Electric. It is designed for surface mount, right-angle orientation, providing a low-profile solution with a height above board of 2.54mm. The connector uses bottom contacts with gold-plated phosphor bronze contacts for reliable electrical performance.</p><p>&nbsp;</p><p>This connector features a zero insertion force (ZIF) mechanism with a rotary lock, ensuring secure cable retention without damaging the flex circuit. The housing and actuator are made of halogen-free Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating. Additional features include solder retention for robust mechanical attachment during reflow soldering.</p><p>&nbsp;</p><p>The FH28-15S-0.5SH(10) supports FFC/FPC cables with a thickness of 0.30mm and tabbed cable ends. It is rated for 50V and operates over a temperature range of -40°C to 105°C. The connector is compliant with RoHS3 and REACH unaffected, with a Moisture Sensitivity Level (MSL) of 1 (unlimited).</p>

<p>The LF10WBJ-4P is a circular connector assembly from Hirose Electric. It features a jack male pin configuration with 4 positions and a shell size of 10. The connector is designed for free hanging (in-line) mounting with solder cup termination. A bayonet lock provides secure fastening, and the keyed orientation ensures correct alignment during mating.</p><p>&nbsp;</p><p>Constructed with a metal shell made of zinc alloy and finished with nickel, the connector is shielded for EMI protection. Contacts are gold plated for reliable conductivity and corrosion resistance. The connector is rated for ingress protection IP67/IP68, making it dust tight and waterproof suitable for harsh environments.</p><p>&nbsp;</p><p>Electrically, it supports a current rating of 10 A and a voltage rating of 125 VAC/DC. The operating temperature range is -25°C to 85°C. The material flammability rating is UL94 V-0. Additional features include a backshell, clamp, and strain relief for cable management.</p>

<p>The DF1B-4DS-2.5RC is a 4-position receptacle connector housing from Hirose Electric's DF1B series. It is designed for free hanging (in-line) mounting, making it suitable for wire-to-wire or wire-to-board applications. The housing has a 2.50mm pitch and 2 rows, providing a compact and reliable connection.</p><p>&nbsp;</p><p>This connector housing supports female socket contacts with crimp or IDC termination, offering flexibility in assembly. The operating temperature range of -35°C to 85°C allows use in various environments. The white color housing is easy to identify in assemblies.</p><p>&nbsp;</p><p>The DF1B-4DS-2.5RC is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited). It is commonly used in consumer electronics, industrial equipment, and automotive applications where a secure and durable connection is required.</p>

<p>The Hirose Electric DF3-4P-2DSA(01) is a 4-position, single-row pin header from the DF3 series, designed for board-to-board or cable connections. It features a 2.00mm pitch and a shrouded 4-wall design for robust mating. The header is configured for vertical through-hole mounting with press-fit and solder termination options.</p><p>&nbsp;</p><p>This connector is built with a black polyamide (PA) or nylon insulator rated UL94 V-0 for flammability. The male square pins are made of brass with a gold contact finish of 8.00µin (0.203µm). The overall contact length is 7.60mm with a mating pin length of 3.10mm. The insulation height is 5.00mm.</p><p>&nbsp;</p><p>Electrically, the DF3-4P-2DSA(01) is rated for a current of 3A. The operating temperature range is specified as -30°C to +85°C per the datasheet. The push-pull fastening type ensures secure connection and easy disconnection. This component is RoHS3 compliant and REACH unaffected.</p>

<p>The Hirose FH34SRJ-8S-0.5SH(99) is a compact 8-position FFC/FPC connector designed for reliable flat flexible cable interconnections. It features a 0.50mm pitch and a right-angle surface mount termination style, making it suitable for space-constrained PCB designs.</p><p>&nbsp;</p><p>This connector utilizes a Zero Insertion Force (ZIF) mechanism with a rotary backlock actuator for secure cable retention. It supports both FFC and FPC cable types with a tapered end and a thickness of 0.30mm. The contacts are made of phosphor bronze with a gold finish, ensuring reliable electrical performance.</p><p>&nbsp;</p><p>The housing is constructed from halogen-free Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating, and the actuator is made of polyamide (nylon). The connector has a height above board of 1.00mm and is rated for an operating temperature range of -55°C to 105°C with a voltage rating of 50V.</p>

<p>The Hirose FH21-26S-1DSA is a 26-position, 1mm pitch FPC/FFC connector designed for through-hole mounting with a vertical orientation. It features a low insertion force (LIF) mechanism for easy cable insertion and a kinked pin termination to prevent floating during soldering. The connector accepts FPC/FFC cables with a thickness of 0.30mm and has a straight cable end type.</p><p>&nbsp;</p><p>Electrical specifications include a rated current of 0.5A, a voltage rating of 50V, a maximum contact resistance of 40mΩ, and a minimum insulation resistance of 500MΩ. The operating temperature range is -30°C to 70°C. The housing is made of Polybutylene Terephthalate (PBT) with a UL94 V-0 flammability rating, and contacts are phosphor bronze with solder plating.</p><p>&nbsp;</p><p>This connector is suitable for applications such as HDDs, facsimiles, printers, and crystal liquid modules. Its dual-sided contact structure does not restrict the directionality of FPC and FFC conductors.</p>

<p>The Hirose Electric DF3A-3P-2DSA is a 3-position, single-row pin header from the DF3 series. It features a shrouded 4-wall design for robust mating, with a 2.00mm pitch suitable for board-to-board or cable connections.</p><p>&nbsp;</p><p>Key specifications include male pin contacts made of brass with a tin finish (39.4µin), square contact shape, and an overall contact length of 0.299" (7.60mm). The insulation height is 5.00mm, and the insulator is black polyamide (PA/nylon) with a UL94 V-0 flammability rating. The mounting type is through hole with press-fit and solder termination options.</p><p>&nbsp;</p><p>Electrical performance includes a current rating of 3A. The operating temperature range is -55°C to 105°C. The connector is RoHS3 compliant and REACH unaffected.</p>

<p>The DF13E-30DP-1.25V(51) is a shrouded surface mount header from Hirose Electric's DF13E series. It features 30 positions arranged in 2 rows with a 1.25mm pitch, providing a compact board-to-cable/wire connection. The header is rated for 1A current and 150V voltage, suitable for low-power signal applications. Contacts are made of brass with a tin-copper finish, and the insulator is beige polyamide (nylon) with a UL94 V-0 flammability rating. The component includes board guide and solder retention features for reliable assembly. Operating temperature range is -35°C to 85°C.</p>

<p>The Hirose Electric DF13C-2P-1.25V(75) is a 2-position, single-row, surface mount header connector designed for board-to-cable/wire applications. It features a 1.25mm pitch and male pin contacts made of brass with a tin finish. The connector is shrouded with a 3-wall design and includes a detent lock for secure mating.</p><p>&nbsp;</p><p>The header is rated for 1A current and 150V voltage, with an operating temperature range of -35°C to 85°C. The insulation is made of polyamide (PA) nylon in beige color and has a UL94 V-0 flammability rating. The contact finish thickness is 1.00µm.</p><p>&nbsp;</p><p>This component is surface mount with solder termination and includes a solder retention feature for reliable board attachment. All 2 positions are loaded. The part is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited).</p>