Hirose Electric

<p>The Hirose DF11CZ-28DP-2V(27) is a 28-position, 2mm pitch surface mount header designed for board-to-board or cable connections. It features a shrouded 4-wall design with a detent lock for secure mating. The header has male pins with tin-plated brass contacts, rated for 2A current and 250V voltage. The insulation is beige polyamide (PA) nylon with a UL94 V-0 flammability rating. Operating temperature range is -30°C to 85°C. The component includes pick-and-place and solder retention features for automated assembly. It is surface mount with solder termination.</p>

<p>The FX30B-3S-7.62DS is a 3-position receptacle from Hirose Electric featuring female blade socket contacts on a 7.62mm pitch. It is designed for board-to-board connections with a through hole right angle mounting style.</p><p>&nbsp;</p><p>Electrical ratings include 13A current and 600V voltage, with an operating temperature range of -55°C to 105°C. The insulation material is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>Mechanical features include latch holder fastening, board guide and board lock for secure mating. The contact finish is tin with 3.90µin thickness. Insulation color is black with an insulation height of 11.00mm.</p><p>&nbsp;</p><p>This connector is suitable for power or signal interconnects in industrial, consumer, and other electronic applications requiring a compact right-angle board-to-board solution.</p>

<p>This is a 50-position FFC/FPC connector from Hirose Electric, part number FH52-50S-0.5SH(99). It features a 0.5mm pitch and a right-angle surface mount design with bottom contacts. The connector uses a flip lock actuator for secure cable retention.</p><p>&nbsp;</p><p>The housing and actuator are made from halogen-free Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating. Contacts are phosphor bronze with gold finish. The connector accepts FFC/FPC cables with a thickness of 0.30mm. Operating temperature range is -40°C to 105°C.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring compact, high-density interconnections. The right-angle orientation and bottom contact design allow for low-profile mounting with a height above board of 2.00mm. The flip lock mechanism simplifies cable insertion and removal.</p>

<p>The Hirose FH28E-40S-0.5SH(07) is a 40 position, 0.5mm pitch FFC/FPC connector designed for right angle surface mount termination. It features a bottom contact position and accepts tabbed cables 0.30mm thick. The connector is built with a liquid crystal polymer (LCP) housing and actuator, both halogen free, and phosphor bronze contacts with gold finish. It incorporates a rotary lock mechanism for secure cable retention and solder retention features for reliable board mounting. The operating temperature range is -40°C to 105°C, and the housing meets UL94 V-0 flammability rating. This zero insertion force (ZIF) connector is suitable for compact electronic assemblies requiring a low profile 2.54mm height above board.</p>

<p>The Hirose DF40C(2.0)-24DS-0.4V(58) is a 24-position receptacle connector from the DF40C series, featuring a 0.4mm pitch and center strip contact arrangement. This surface mount connector is designed for board-to-board mezzanine applications requiring a compact, low-profile interconnect solution.</p><p>&nbsp;</p><p>Key specifications include a 2-row configuration with gold-plated contacts, a height above board of 0.077 inches (1.95mm), and a mated stacking height of 2mm. The connector uses solder termination and is RoHS3 compliant and REACH unaffected.</p><p>&nbsp;</p><p>This connector is suitable for use in space-constrained electronic assemblies where reliable signal transmission between parallel PCBs is required. The fine 0.4mm pitch enables high-density routing while maintaining signal integrity.</p>

<p>The 3260B-12S3(56) is a 12-position receptacle connector from Hirose Electric, part of the 3260B series. It features a 0.80mm pitch and single row configuration. The connector is designed for board-to-cable/wire connections and utilizes a surface mount, right-angle mounting type with solder termination. It includes a latch holder for secure fastening and is shielded with board guide features. The contacts are gold plated with a thickness of 8.00µin (0.203µm). Electrical ratings include 500mA current and 125VAC voltage. The insulation is black, with a height of 2.90mm, and the material has a flammability rating of UL94 V-0. This connector is suitable for compact electronic devices requiring reliable signal transmission. The shielded design helps reduce electromagnetic interference. The board guide assists in alignment during assembly. The latch holder ensures a secure connection to the mating cable connector.</p>

<p>The IX80G-B-10P is a multi-purpose connector from Hirose Electric, designed as a receptacle with a vertical orientation. It offers 10 positions for signal or power connections, utilizing surface mount technology for efficient PCB assembly. The connector features gold-plated contacts with a thickness of 7.87µin (0.200µm) for reliable conductivity and corrosion resistance. Included features such as board guide, keyed polarization, and a pick and place cap facilitate automated assembly and correct alignment. This connector is classified as a pluggable connector assembly, suitable for applications requiring a secure and repeatable connection. The component is surface mountable with solder termination, and is rated with a Moisture Sensitivity Level of 1 (unlimited), indicating no special handling requirements for moisture. It is RoHS3 compliant and REACH unaffected, though these compliance claims are unverified.</p>

<p>The Hirose Electric HR30-6R-6S(71) is a circular connector assembly from the HR30 series. This receptacle accepts female sockets and provides 6 power positions arranged in a keyed orientation to prevent mismating. The connector features gold-plated contacts for reliable signal integrity and is designed for panel mounting with a bulkhead rear side nut.</p><p>&nbsp;</p><p>Electrical specifications include a current rating of 2 A per contact and a voltage rating of 100 VAC or 140 VDC. The connector is housed in a black Polyphenylene Sulfide (PPS) shell material, providing a robust plastic construction with UL94 V-0 flammability rating. The operating temperature range spans -25°C to 85°C.</p><p>&nbsp;</p><p>This model utilizes a push-pull fastening mechanism for quick mating and unmating. It is rated IP67/IP68 for dust tightness and waterproof performance, making it suitable for applications requiring environmental sealing. Termination is via solder cup contacts, and mounting is panel mount with the included rear side nut for secure installation.</p>

<p>The DF3Z-3P-2V(51) from Hirose Electric is a 3-position, single-row, shrouded header with a 2.00mm pitch. It features male pin contacts made of brass with gold plating, terminated via surface mount soldering. The connector is designed for board-to-board or cable applications, with a push-pull fastening mechanism and a 4-wall shrouded housing for protection. The beige insulation is made of polyamide (PA) nylon with a UL94 V-0 flammability rating. Electrical rating is 3A, operating temperature range is -55°C to 105°C. The header includes board guide and solder retention features for reliable assembly. It is RoHS3 and REACH compliant, with MSL Level 1 unlimited.</p>

<p>The DF3-3P-2DSA(01) is a 3-position, single-row, 2.00mm pitch shrouded header from Hirose Electric's DF3 series. It features a 4-wall shrouded design for secure mating and alignment. Contacts are male pins made of brass with 8µin gold plating. The insulation is black polyamide (nylon) with UL94 V-0 flammability rating. Operating temperature range is -55°C to 105°C. Current rating is 3A. Termination options include press-fit and solder. Mounting type is through hole. This connector is suitable for board-to-board or cable applications.</p>

<p>The HR25-7TP-8S(72) is a circular connector plug from Hirose Electric, part of the HR25 series. It features 8 female sockets with gold-plated contacts, designed for solder cup termination. The connector is free hanging (in-line) and uses a threaded coupling mechanism for secure mating. Its keyed orientation prevents incorrect insertion.</p><p>&nbsp;</p><p>Electrically, the connector is rated for 1 A continuous current and 30VAC/42VDC. It operates over a temperature range of -25°C to 85°C and has a UL94 V-0 flammability rating. The housing is shielded for EMI protection.</p><p>&nbsp;</p><p>Mechanically, the connector includes a backshell, clamp, coupling nut, and strain relief. The shell is made of zinc alloy with a nickel finish. The overall color is black and silver. This connector is suitable for applications requiring rugged, shielded connections in industrial, medical, or test equipment.</p>

<p>The RP13A-12PA-13SC(71) is a circular connector plug housing manufactured by Hirose Electric. It is designed for use with female socket contacts and features a 13-position layout with a mix of contact sizes: 11 positions accept 1.2mm contacts and 2 positions accept 1.6mm contacts. The housing uses a crimp termination method and a push-pull fastening mechanism for secure mating.</p><p>&nbsp;</p><p>The shell is made of polycarbonate (PC) with a black color and carries a UL94 V-0 flammability rating. The housing is unshielded and keyed for proper orientation. It includes a backshell, cable clamp, and strain relief features. Mounting type is free hanging (in-line), making it suitable for cable-to-cable or cable-to-panel applications where a robust, lightweight connector housing is required.</p>

<p>The Hirose DF17(1.0H)-60DP-0.5V(57) is a 60-position, 2-row header connector with outer shroud contacts, designed for board-to-board mezzanine applications. It features a 0.5mm pitch and a mated stacking height of 4mm, making it suitable for compact, high-density interconnects.</p><p>&nbsp;</p><p>This connector is surface mount compatible and includes board guide and solder retention features for reliable assembly. The contacts are finished with gold for enhanced conductivity and corrosion resistance. The connector stands 3.30mm above the board.</p><p>&nbsp;</p><p>Typical applications include portable electronics, communication equipment, and other devices requiring a low-profile, high-density board-to-board connection. The DF17 series is known for its robust design and ease of use in automated assembly processes.</p>

<p>The Hirose DF3-2P-2DSA(01) is a 2-position, single-row shrouded header connector designed for board-to-board or cable-to-board applications. It has a pitch of 2.00mm and features a 4-wall shrouding for protection and alignment. The connector uses male pin contacts made of brass with a gold plating thickness of 8.00µin.</p><p>&nbsp;</p><p>This header is rated for a current of 3A and operates over a temperature range of -55°C to 105°C. The insulation material is polyamide (nylon) with a UL94 V-0 flammability rating, and the housing is black. The overall contact length is 0.299 inches (7.60mm), and the insulation height is 5.00mm.</p><p>&nbsp;</p><p>The connector uses a through-hole mounting style with press-fit and solder termination options. The fastening type is push-pull, making it suitable for applications requiring secure but easy mating. The contact shape is square, and the contact length is 3.10mm.</p>

<p>The Hirose DF3A-13P-2DS is a 2mm pitch pin header connector designed for board-to-board or discrete wire cable connections.</p><p>&nbsp;</p><p>This shrouded header has 13 positions in a single row, with a right-angle mounting orientation and through-hole termination. The box-type shroud provides scoop-proof mating and robust mechanical stability. Contacts are made of tin-plated brass and are square in shape.</p><p>&nbsp;</p><p>The header is rated for 3A current and operates over a temperature range of -55°C to 105°C. The insulator is black polyamide (nylon) with a UL94 V-0 flammability rating. The termination style supports both press-fit and solder connections.</p><p>&nbsp;</p><p>Typical applications include business equipment such as copiers and printers, as well as any application requiring a compact, reliable 2mm pitch interconnect.</p>

<p>The Hirose QM30-14P-EP(50) is a 14-position IDC plug connector designed for discrete or ribbon cable termination. It features outer shroud contacts with gold finish for reliable signal transmission and corrosion resistance. The connector has a 1.78mm (0.070") pitch and a 2-row configuration, making it suitable for compact wiring applications.</p><p>&nbsp;</p><p>The free hanging (in-line) mounting type allows easy cable assembly without additional hardware. The IDC termination style supports quick mass termination of discrete wire or ribbon cable, minimizing assembly time. The connector body is black, indicating standard housing material.</p><p>&nbsp;</p><p>This plug connector is commonly used in internal wiring of electronic equipment, control systems, and data communication devices where space is constrained and reliable connections are required. The gold contact finish meets typical requirements for low-signal-level applications.</p>

<p>The FH26W-15S-0.3SHW(99) is a 15-position FPC connector from Hirose Electric's FH26W series. It features a 0.3mm pitch and a right-angle surface mount design with bottom contacts. The connector utilizes a zero insertion force (ZIF) flip lock mechanism for secure cable retention. Contacts are gold-plated phosphor bronze, and the housing is made of liquid crystal polymer (LCP) with a polyamide actuator. The connector is rated for 30V and operates over -55°C to 85°C. It accepts FPC cables with a thickness of 0.20mm and tapered ends. The height above board is 1.00mm. The material flammability rating is UL94 HB. This connector is suitable for applications requiring a compact, low-profile FPC interconnection with reliable ZIF locking.</p>

<p>The Hirose DF20F-30DP-1V(55) is a 30 position, 2 row, 1.00mm pitch shrouded header connector designed for board-to-cable/wire applications. It features a push-pull fastening type and a 4-wall shrouded design for reliable mating.</p><p>&nbsp;</p><p>This connector is rated for 1A current per contact and 100V voltage. The contacts are made of phosphor bronze with a gold finish of 8.00 µin (0.203 µm) thickness. The insulation is natural colored polyamide (PA) nylon with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>The header is surface mount (SMT) with solder termination and includes a solder retention feature. It has an insulation height of 4.60mm and a row spacing of 1.00mm. The operating temperature range is -35°C to 85°C.</p>

<p>The FX23-80S-0.5SH is a high-density board-to-board connector from Hirose Electric, featuring 84 positions (80 signal contacts plus 4 power contacts) arranged in 2 rows with a 0.50mm pitch. This receptacle connector uses a center strip contact design and is configured for surface mount right angle mounting, making it suitable for mezzanine stacking applications where space is constrained.</p><p>&nbsp;</p><p>The connector has a height above board of 0.287 inches (7.30mm) and includes a board guide feature to assist with alignment during assembly. Contacts are finished with 4.00 microinches (0.100 micrometers) of gold, providing reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This component is designed for use in arrays, edge type, and mezzanine (board-to-board) interconnect applications. The right angle orientation allows for parallel board stacking with a controlled separation distance.</p>

<p>The Hirose HIF3-2226SCA is a crimp-type socket contact designed for use with Hirose HIF3 series rectangular connectors. It accommodates wire gauges from 22 to 26 AWG and features a gold contact finish for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact uses a crimp termination style, providing a secure and durable connection suitable for a variety of wire-to-board and wire-to-wire applications. The gold plating ensures consistent electrical performance over multiple mating cycles.</p><p>&nbsp;</p><p>As a socket contact, it is the female half of the connector interface, designed to mate with corresponding pin contacts in the HIF3 series. The part is RoHS3 compliant and has an MSL of 1 (unlimited), indicating no moisture sensitivity restrictions.</p>

<p>The FX8C-120P-SV6(71) is a 120-position, 2-row surface mount header from Hirose Electric. It features a 0.60mm pitch for high-density board-to-board connections. The connector uses gold contact finish for reliable signal integrity and includes a board guide for accurate alignment during assembly.</p><p>&nbsp;</p><p>With a height above board of 10.85mm, this header supports mated stacking heights of 11mm and 16mm, making it suitable for mezzanine applications. The outer shroud contacts provide robust mechanical retention and protection.</p><p>&nbsp;</p><p>This component is designed for surface mount soldering and is RoHS3 compliant. It is ideal for compact electronic devices requiring high pin count and fine pitch interconnects.</p>

<p>The Hirose Electric FX20-80P-0.5SV15 is a high-density header connector designed for board-to-board and mezzanine applications. This connector features 80 positions arranged in 2 rows with a fine 0.50mm pitch, enabling compact and space-efficient interconnections.</p><p>&nbsp;</p><p>The connector utilizes a surface mount mounting type and is terminated with gold-plated contacts featuring a 4.00µin (0.100µm) thickness for reliable signal integrity. It includes a solder retention feature to secure the connector during the reflow process. The height above board is 0.520" (13.20mm), and it supports mated stacking heights of 15mm and 25mm.</p><p>&nbsp;</p><p>This component is part of the FX20 series from Hirose Electric and is categorized under Arrays, Edge Type, Mezzanine (Board to Board) connectors. It is suitable for use in various electronic devices requiring high pin count and fine pitch interconnections.</p>

<p>The FX18-40P-0.8SV10 is a 40-position header connector with outer shroud contacts from Hirose Electric. It features a 0.8mm pitch and 2 rows, designed for surface mount assembly. The contacts are finished with 4.00µin gold for reliable connections. The connector has a height above board of 18.65mm and supports mated stacking heights of 25mm and 30mm, making it suitable for mezzanine board-to-board applications. It includes a board guide feature for proper alignment during assembly. This connector is part of the FX18 series and is RoHS3 compliant (unverified) with an MSL of 1.</p>

<p>The FX10B-120P/12-SV1(82) is a board-to-board header connector from Hirose Electric's FX10B series. It features 120 positions arranged in 2 rows with a 0.5mm pitch, making it suitable for high-density interconnections. The connector uses outer shroud contacts with gold finish for reliable signal integrity. It is designed for surface mount mounting and has a mated stacking height of 5mm. The connector includes a ground plate and solder retention features for enhanced mechanical stability. The height above board is 0.177 inches (4.50mm). This connector is RoHS3 compliant and has an MSL of 1 (unlimited). It is commonly used in mezzanine board-to-board applications where space is limited.</p>