DC DC Converters

<p>The DCP011515DBP-U is an isolated DC-DC converter from Texas Instruments. It delivers dual ±15V outputs at 33mA each, providing a total output power of 1W. The module features an efficiency of 80% and includes over-temperature protection (OTP) and short-circuit protection (SCP) for reliable operation. The device has an enable control with active high logic.</p><p>&nbsp;</p><p>This converter is designed for commercial ITE (Information Technology Equipment) applications. It operates over a temperature range of -40°C to 100°C. The DCP011515DBP-U is housed in a 14-SMD surface mount package with 7 leads, measuring 19.7mm x 8.3mm x 5.3mm. It is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited).</p>

<p>The EVW010A0B41Z is an isolated DC-DC converter module from ABB Power Electronics. It provides a single regulated 12V output with 10A current capability, delivering up to 120W. The module features a high efficiency of 93.5% for reduced thermal dissipation.</p><p>&nbsp;</p><p>Designed for commercial ITE applications, this converter offers comprehensive protection features including overcurrent (OCP), overtemperature (OTP), overvoltage (OVP), and undervoltage lockout (UVLO). It supports remote on/off control with active low enable.</p><p>&nbsp;</p><p>The converter operates over a wide temperature range of -40°C to 85°C. It comes in a compact through-hole module package measuring 57.9mm x 22.8mm x 8.5mm, making it suitable for space-constrained designs.</p>

<p>The B0505ST16-W5 is an isolated DC/DC converter module manufactured by MORNSUN. It provides four regulated outputs with a total power rating of 1.99 watts. The module operates from a nominal 5.4V input and delivers output currents of 150 mA, 135 mA, 100 mA, and 92 mA. An adjustable output feature allows fine-tuning of the output voltages.</p><p>&nbsp;</p><p>The converter is housed in a compact 16-SOIC surface mount package measuring 10.3 mm by 7.5 mm with a height of 2.7 mm. It is rated for a wide operating temperature range of -55°C to 125°C with derating. The module is intended for commercial ITE (Information Technology Equipment) applications and complies with safety standard 62368-1.</p><p>&nbsp;</p><p>Environmental compliance information includes RoHS3 (unverified), MSL Level 1 (unlimited), and REACH unaffected status. The part number cross-references to Digi-Key as 2725-B0505ST16-W5TR-ND. For detailed design guidelines, refer to the official MORNSUN datasheet.</p>

<p>The EM2130L01QI is a fully integrated 30A digital PowerSoC synchronous buck converter from Intel. It combines an advanced digital controller, gate drivers, synchronous MOSFET switches, and a high-performance inductor in a compact 100-PowerBQFN (100-QFN 17x11) package. Only input and output filter capacitors and a few small signal components are required for a complete solution.</p><p>&nbsp;</p><p>Key electrical specifications include a wide input voltage range of 4.5V to 16V, an adjustable output voltage from 0.7V to 1.325V, and a continuous output current of 30A with no thermal derating. Typical efficiency reaches 90% at 12V in, 1.2V out and 95% at 5V in, 3.3V out. The digital control loop ensures excellent transient response and stability, and the device supports PMBus version 1.2 for setup, control, and telemetry.</p><p>&nbsp;</p><p>With differential remote sensing and ±0.5% set-point accuracy, the EM2130L01QI provides precise regulation for today's FPGAs, ASICs, processors, and DDR memory. The device operates over a -40°C to 85°C temperature range and is RoHS3 compliant. Its surface-mount design and optimized solution size of only 365 mm² make it suitable for space-constrained applications in ITE (commercial) equipment.</p>

<p>The DCP022405DU is an isolated DC DC converter module from Texas Instruments. It provides dual regulated outputs of +5V and -5V, each capable of delivering 200mA, for a total output power of 2W. The converter operates with an efficiency of 80% and includes over-temperature protection (OTP) for reliable operation.</p><p>&nbsp;</p><p>This module is designed for commercial ITE (Information Technology Equipment) applications. It is housed in a 28-SOIC (0.295", 7.50mm Width) package with 12 leads, and the supplier device package is 12-SOP. The surface mount design allows for automated assembly. The device measures 18.1mm in length, 7.6mm in width, and 2.7mm in height.</p><p>&nbsp;</p><p>The DCP022405DU operates over a temperature range of -40°C to 85°C, making it suitable for a wide range of environments. It is RoHS3 compliant and has an MSL rating of 1 (unlimited).</p>

<p>The Artesyn AEE00CC18-LS is an isolated DC DC converter from the AEE series, delivering dual ±15V outputs at 500mA each for a total output power of 15W. It features a wide 4:1 input voltage range of 9 to 36Vdc and provides 1500Vdc input/output isolation. Key electrical specifications include a typical efficiency of 84%, a switching frequency of 300kHz, and output voltage tolerance of ±2.0%. The module includes short circuit protection with auto-restart.</p><p>&nbsp;</p><p>This converter is designed for through-hole mounting in a compact 5-DIP package measuring 50.8mm x 25.4mm x 11.3mm. It can operate over an ambient temperature range of -40°C to +71°C without derating. Typical applications include industrial automation, instrumentation, test and measurement, and telecommunications equipment.</p>

<p>The DCV010505DP is an isolated DC DC converter module from Texas Instruments. It delivers dual output voltages of +5V and -5V, each capable of supplying 100mA, for a total output power of 1W. The converter operates with an efficiency of 80% and includes over-temperature protection (OTP) and short-circuit protection (SCP) for reliable operation.</p><p>&nbsp;</p><p>This converter is designed for commercial ITE (Information Technology Equipment) applications. It features an enable control input that is active high, allowing external control of the output. The operating temperature range is -40°C to 85°C, making it suitable for a wide range of environments.</p><p>&nbsp;</p><p>The DCV010505DP is supplied in a through-hole 7-PDIP package (14-DIP with 7 leads), measuring 19.7mm x 8.3mm x 5.3mm. The compact size and isolation make it ideal for systems requiring isolated dual power rails.</p>

<p>The DCP021212DU is an isolated DC-DC converter module from Texas Instruments designed for commercial ITE applications. It provides dual regulated outputs of +12V and -12V, each capable of delivering 83mA, for a total output power of 2W. The converter achieves an efficiency of 88% and includes over-temperature protection (OTP) for reliable operation.</p><p>&nbsp;</p><p>This module operates over a temperature range of -40°C to 85°C and is housed in a compact surface mount package. The package is a 28-SOIC (0.295" width, 7.50mm) with 12 leads, and the supplier device package is designated as 12-SOP. The dimensions are 18.1mm x 7.6mm x 2.7mm, making it suitable for space-constrained designs.</p><p>&nbsp;</p><p>The converter uses an isolated topology, providing galvanic isolation between input and output, which is essential for noise-sensitive circuits and safety isolation. Typical applications include powering dual-supply analog circuits, operational amplifiers, and data converters in industrial and commercial equipment.</p>