DC DC Converters

<p>The MORNSUN F0505S-1WR3 is an isolated DC-DC converter module designed for board-level power conversion. It delivers a regulated 5V output at 200mA, providing 1W of output power. The converter operates from a minimum input voltage of 4.5V and achieves a typical efficiency of 82%.</p><p>&nbsp;</p><p>This module is housed in a compact 7-SIP package with 4 leads, suitable for through-hole mounting. It is rated for commercial ITE applications and carries approvals from CB, CE, and cURus. The operating temperature range spans -40°C to 105°C with derating.</p><p>&nbsp;</p><p>The isolated design provides galvanic isolation between input and output, making it suitable for applications requiring noise reduction or ground loop elimination. The single-output configuration simplifies integration into power supply designs.</p>

<p>The EN6362QI is a non-isolated point-of-load (PoL) DC-DC converter module from Intel. It provides a single adjustable output voltage from 0.6V to 6.05V with a maximum output current of 6A. The module operates from a nominal 3V input and achieves up to 96% efficiency. It features enable control (active high) and includes remote on/off, overcurrent protection (OCP), overtemperature protection (OTP), short-circuit protection (SCP), and undervoltage lockout (UVLO).</p><p>&nbsp;</p><p>The EN6362QI is housed in a 56-PowerBFQFN surface-mount package measuring 8.0mm x 8.0mm x 3.0mm. It is designed for commercial ITE (Information Technology Equipment) applications and operates over a temperature range of -40°C to 125°C. The module is RoHS3 compliant and REACH unaffected with an MSL rating of 1 (unlimited).</p>

<p>The Intel EN23F0QI is a non-isolated Point-of-Load (PoL) DC-DC converter module from the Enpirion PowerSoC family. It integrates MOSFET switches, control circuits, compensation, and an inductor in a compact 92-PowerBFQFN package measuring 13x12x3mm. This module is designed for space-constrained applications requiring high current and precise voltage regulation.</p><p>&nbsp;</p><p>The EN23F0QI operates from an input voltage range of 4.5V to 14V and delivers an adjustable output from 0.75V to 3.3V with a maximum output current of 15A. It features 1% initial output voltage accuracy and supports frequency synchronization to an external clock. Protection features include over-temperature protection (OTP), short-circuit protection (SCP), and under-voltage lockout (UVLO). Additional features include an enable pin, power OK signal, and programmable soft-start.</p><p>&nbsp;</p><p>The module supports master/slave configuration for parallel operation allowing up to four devices for 48A capability. It is surface mountable and rated for operating temperatures from -40°C to 85°C. The EN23F0QI is RoHS compliant and has an MSL level of 3. Note: This product is not recommended for new designs according to the manufacturer.</p>

<p>The EQD075A41Z is a high-efficiency isolated DC-DC converter module from ABB Power Electronics, part of the EQD075 series. It accepts a wide input voltage range of 18V to 60V and provides a programmable output voltage from 3.0V to 5.5V (factory set for 3.3V to 5V). The module delivers up to 75W of output power with a maximum output current of 20A at 3.3V and 15A at 5V. Typical efficiency reaches 92% at 5V full load with 24V input, contributing to reduced thermal management requirements.</p><p>&nbsp;</p><p>The converter features industry-standard eighth-brick footprint (57.9 mm x 22.8 mm x 8.5 mm) with through-hole mounting in an 8-DIP module package. It includes comprehensive protection features such as overcurrent, overvoltage, overtemperature, and undervoltage lockout. Control features include remote on/off with active low enable and remote sense for accurate output voltage regulation. Basic insulation of 1500V is provided between input and output.</p><p>&nbsp;</p><p>This module is designed for distributed power architectures, wireless networks, optical and access network equipment, and enterprise networking applications. It is certified to UL 60950-1, CSA 22.2 No. 60950-1-03, and VDE 0805 (EN60950-1) safety standards.</p>

<p>The EM2140P01QI is a fully integrated 40A synchronous buck converter from Intel Enpirion. It integrates the digital controller, gate drivers, MOSFETs, and inductor into a compact 104-PowerBQFN package measuring 17mm x 11mm x 6.8mm.</p><p>&nbsp;</p><p>It accepts input voltages from 4.5V to 16V and delivers up to 40A of continuous current with a regulated output voltage range of 0.7V to 1.325V. Typical efficiency reaches 90% at 12V input and 1.2V output. Output ripple is as low as 10mV peak-to-peak.</p><p>&nbsp;</p><p>The device features a PMBus v1.2 compliant interface for setup, control, and telemetry. It includes differential remote sensing and 0.5% set-point accuracy over line, load, and temperature. The operating temperature range is -40°C to 85°C. Only input/output capacitors and a few small components are required for a complete solution.</p><p>&nbsp;</p><p>It is designed for FPGAs, ASICs, processors, and DDR memory rails requiring high efficiency and precise regulation. The digital control loop provides excellent transient response and eliminates external compensation.</p>

<p>The TDK-Lambda CC3-2412DR-E is an isolated DC-DC converter from the CC-E series. It operates from a nominal 24V input and provides dual outputs that can be adjusted from +/-12V to +/-15V. Each output delivers 125mA, for a total power of 3W. The converter features an enable control with active low logic, and is designed for commercial ITE applications.</p><p>&nbsp;</p><p>This converter uses a 5-side metal-shielded design for low noise and is built without tantalum or aluminum electrolytic capacitors, enhancing reliability. It is housed in a 7-SMD module measuring 22.9mm x 16.6mm x 8.8mm, suitable for surface mount assembly. The operating temperature range is -40°C to 85°C, making it suitable for a variety of environments.</p><p>&nbsp;</p><p>The CC3-2412DR-E is a dual-output version, providing both positive and negative regulated voltages. Its compact size and isolated topology make it ideal for board-level power distribution where isolation between input and output is required.</p>

<p>The EN6340QI is an Intel Enpirion PowerSoC DC-DC converter that integrates the inductor, MOSFET switches, and compensation in a compact 34-QFN package. It operates at a 2MHz switching frequency and delivers up to 4A continuous output current with efficiency up to 95%. The input voltage range is 2.7V to 6.6V, and the output voltage is adjustable from 0.75V to 6.28V.</p><p>&nbsp;</p><p>This module includes comprehensive protections: over-current (OCP), over-temperature (OTP), short-circuit (SCP), and under-voltage lockout (UVLO). It also features remote on/off control, enable (active high), and a power OK indicator. The device is designed for point-of-load regulation in FPGAs, ASICs, DSPs, and distributed power architectures.</p><p>&nbsp;</p><p>The EN6340QI is surface mountable in a 34-PowerBFQFN package measuring 6.0mm x 4.0mm x 2.5mm. It is RoHS compliant and rated for operation from -40°C to 85°C.</p>