Qualtek

<p>The Qualtek 701W-X2/02 is an IEC 60320 C14 universal snap-in AC power inlet designed for panel mounting. It features a nylon body, brass tin-plated contacts, and solder eyelet termination. The device is rated for 15A at 250VAC under UL/CSA standards and 10A at 250VAC under VDE/CCC standards.</p><p>&nbsp;</p><p>Key electrical specifications include an insulation resistance of over 100 MΩ at 500 VDC and a dielectric strength of 2000 VAC for one minute. The connector style is IEC 320-C14 with a receptacle, male blades configuration. It accepts panel thicknesses from 0.81 mm to 1.50 mm, with a rectangular panel cutout of 27.00 x 20.00 mm.</p><p>&nbsp;</p><p>This power inlet does not accommodate a fuse and is classified as an unfiltered commercial grade component. It has approvals from CCC, CSA, UL, and VDE. The body material is nylon, and the contact material is brass with tin plating. The part is RoHS3 compliant and REACH unaffected, with no SVHC above 0.1%.</p>

<p>The Qualtek 761-18/003 is a power entry module (PEM) designed for AC power input applications. It features an IEC 320-C14 receptacle with male blades, providing a standardized interface for detachable power cords. This module is panel mount with snap-in installation, making it easy to integrate into enclosures.</p><p>&nbsp;</p><p>Electrically, the module is rated for 6 A at 115/250 VAC over a frequency range of 48-440 Hz. It has a hipot rating of 2000 VDC line-to-ground and line-to-line, and a minimum insulation resistance of 10 MOhm at 500 VDC. The module is unfiltered, suitable for applications where external filtering is employed.</p><p>&nbsp;</p><p>Mechanically, it requires a rectangular panel cutout of 66.04 mm x 27.00 mm and accepts panel thicknesses from 1.02 mm to 1.78 mm. Terminals are quick connect 0.157" for easy wiring. The module includes an SPST on-off switch and a single 5x20mm fuse holder (fuse not included).</p><p>&nbsp;</p><p>This PEM is commonly used in power supplies, instrumentation, and industrial equipment where a switched and fused IEC inlet is needed. It is RoHS compliant and carries approvals from CSA, SEMKO, and UL.</p>

<p>The Qualtek 762-18/002 is a multi-function power entry module designed for commercial equipment requiring a compact, integrated power inlet solution. It features an IEC 320-C14 connector style with a receptacle and male blades, combining power input, an on-off switch, and a single 5x20mm fuse holder in one panel-mount unit.</p><p>&nbsp;</p><p>Electrical ratings include 6A RMS maximum at 115/250VAC over a 48-440Hz operating frequency range. The module meets minimum hipot ratings of 2000VDC line-to-ground and line-to-line, and minimum insulation resistance of 10MΩ at 500VDC. Safety approvals include CSA, SEMKO, and UL.</p><p>&nbsp;</p><p>Mechanically, the module mounts via snap-in into a rectangular panel cutout of 66.04mm x 27.00mm, accommodating panel thicknesses from 1.02mm to 1.78mm. Termination is via 0.250" (6.3mm) quick connect tabs for easy wiring. The fuse holder accepts standard 5x20mm fuses (fuse not included). The module is RoHS compliant.</p>

<p>The Qualtek 710W-00/01 is an IEC 60320 C13 (IEC 320-2-2/F) AC power outlet designed for panel mount applications with a flange screw mount. It features a black PBT housing and brass, tin-plated solder eyelet terminals.</p><p>&nbsp;</p><p>This unfiltered commercial-grade receptacle is rated 15A at 250VAC under UL and CSA approvals, and 10A at 250VAC under TUV and CCC approvals. It accepts a rectangular panel cutout of 32.50mm x 25.00mm and is suitable for use in power entry systems requiring a reliable screw-mount connection.</p><p>&nbsp;</p><p>The part is RoHS3 compliant, REACH unaffected, and contains PFAS (CAS# 24920-49-3, 0.1% to 1%). It does not accommodate a fuse.</p>

<p>The Qualtek 739W-X2/03 is a NEMA 5-15R AC power outlet designed for panel mount applications. It features a snap-in mounting style and uses IDC (Insulation Displacement Connector) terminals for quick and reliable wire termination, accepting 14 AWG solid copper wire only. The outlet is rated for 15A at 125VAC and is approved by UL and CSA.</p><p>&nbsp;</p><p>Constructed with a nylon body and brass contacts with nickel plating, the 739W-X2/03 is RoHS and REACH compliant. The panel cutout is square 24.50mm x 24.50mm and accommodates panel thicknesses from 0.79mm to 1.80mm. The terminating cover is included as a feature. The part is shipped unassembled.</p><p>&nbsp;</p><p>This outlet is suitable for use in power distribution units, industrial equipment, and other applications requiring a standard NEMA 5-15R receptacle. The snap-in design simplifies installation into pre-cut panels.</p>

<p>The Qualtek 857-01/005 is a filtered IEC 320-C14 power entry module designed for panel mount applications. It features a male blade receptacle with three positions and quick connect termination for easy installation.</p><p>&nbsp;</p><p>This module includes integrated EMI/RFI filtering for commercial applications, helping to reduce conducted interference. It is rated for 1A at 115/250 VAC, making it suitable for a variety of low-power equipment.</p><p>&nbsp;</p><p>Mechanically, the part uses a panel mount with flange and requires a rectangular cutout of 28.45 mm x 21.59 mm. It is approved by CSA, UL, and VDE agencies.</p><p>&nbsp;</p><p>The module does not accommodate a fuse. Termination style is quick connect.</p>

<p>The Qualtek 312003-01 is a 7.50-foot (2.29 m) AC power cord designed for general-purpose power distribution. It features a NEMA 5-15P male plug on one end and an IEC 320-C13 female connector on the other, making it suitable for connecting computers, monitors, printers, and other equipment with a C13 power inlet. The cord uses 18 AWG SVT unshielded cordage with three conductors and a black jacket. It is rated for 125VAC at 10A and has a maximum operating temperature of 60°C. The product is cUL and UL approved for use in Canada and the United States. It is RoHS3 compliant and REACH unaffected. The cord is packaged in a hank and tie arrangement for easy storage and handling.</p>

<p>The Qualtek 723W-X2/04 is an IEC 60320 C14 AC power inlet module designed for panel mount applications. It features a snap-in mounting style and quick connect 0.250" (6.3mm) terminals for easy installation. The module includes a dual fuseholder with one active and one spare position, accepting 5x20mm fuses (not included).</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC. The housing is made of Nylon #66 in black color, and the panel thickness range is 0.79mm to 2.00mm. The part carries approvals from UL, CSA, TUV, and CCC, and is RoHS3 and REACH compliant.</p><p>&nbsp;</p><p>This power entry module is suitable for a wide range of commercial and industrial equipment requiring a reliable IEC C14 inlet with integrated fuse protection. The snap-in design simplifies assembly and provides secure mounting in various panel cutout configurations.</p>

<p>This Qualtek QLB-253-00DNN-3BA is a thermal circuit breaker designed for reliable overcurrent protection. It offers a robust 25A current rating and a 250VAC voltage rating, with an additional rating of 32VDC.</p><p>&nbsp;</p><p>The breaker features a convenient push-to-reset actuator for manual operation. Its design is optimized for panel mounting, with a specified panel thickness range of 0.8mm to 2.5mm and a panel cutout diameter of 15.8 ± 0.2 mm.</p><p>&nbsp;</p><p>Key electrical specifications include a single pole configuration and a thermal tripping mechanism. This makes it suitable for various industrial and commercial applications requiring dependable circuit protection.</p><p>&nbsp;</p><p>Compliance information indicates RoHS status as Compliant, though this is unverified. The part is also listed with an MSL rating of 1 and REACH status as Unaffected, both also unverified.</p>