Cincon Electronics Co. LTD

<p>The EC5BE03 is a 15W isolated DC-DC converter module from the Cincon EC5BE series. It delivers a single regulated 15V output at up to 1A (1000mA) from a 9-18V DC input, with a typical efficiency of 82%. The converter features a 2:1 input range, Pi-type input filter, and continuous short circuit protection. It offers 500V isolation and operates at a switching frequency of 300 kHz.</p><p>&nbsp;</p><p>Designed for commercial ITE (Information Technology Equipment) applications, the EC5BE03 is approved to UL60950-1 and meets EN55032 Class A conducted emissions. It is housed in a 6-DIP through-hole package with a six-sided shielded metal case measuring 50.8mm x 25.4mm x 10.2mm. The operating temperature range is -25°C to 100°C with derating.</p><p>&nbsp;</p><p>This converter is suitable for board-level power distribution in industrial, telecom, and data communication systems where isolated and regulated power is required. The remote on/off control option is available for additional flexibility.</p>

<p>The Cincon EC3AW05 is a 3-watt isolated DC-DC converter from the EC3AW series, offering dual regulated outputs of ±12 VDC at 125 mA per output. It accepts a wide 4:1 input voltage range of 9-36 VDC, with a nominal input of 24 VDC.</p><p>&nbsp;</p><p>Key electrical specifications include a typical efficiency of 72%, line regulation of ±0.5%, load regulation of ±1.0%, and output voltage accuracy of ±2.0%. The converter features a Pi-type input filter and continuous short circuit protection. Isolation voltage is rated at 500 VDC minimum.</p><p>&nbsp;</p><p>The converter is housed in a non-conductive black plastic 24-DIP module with 14 leads, measuring 31.8 mm x 20.3 mm x 10.2 mm, and is designed for through-hole mounting. It operates over a temperature range of -25°C to 71°C and is suitable for commercial ITE applications.</p>

<p>The CFM260S480 from Cincon Electronics Co. LTD is an open frame AC/DC converter with a power output of 260W. It is designed for chassis mounting and offers a high efficiency of 93%.</p><p>&nbsp;</p><p>Key electrical features include universal input capability and Power Factor Correction (PFC). The converter provides 3kV of isolation voltage, making it suitable for various applications. It operates with a single output and delivers a current of 5.42A.</p><p>&nbsp;</p><p>This AC/DC converter has a mechanical footprint of 101.6mm in length, 50.8mm in width, and 33.6mm in height. It is rated for an operating temperature range of -30°C to 80°C, with derating applied at higher temperatures.</p><p>&nbsp;</p><p>The CFM260S480 is compliant with standards such as 60335-1 and 62368-1, and is RoHS3 compliant. Its applications include household appliances and ITE (Commercial) equipment.</p>

<p>The EC5BE13 is part of the EC5BE series of 15W isolated DC-DC converters from Cincon Electronics Co. LTD. It features a 2:1 input voltage range of 18-36V DC (nominal 24V) and delivers a single regulated 15V output at up to 1A. Typical efficiency is 82% at full load, with a switching frequency of 300 kHz. The converter includes a Pi-type input filter and continuous short circuit protection.</p><p>&nbsp;</p><p>Packaged in a six-sided shielded metal case, the EC5BE13 is housed in a 6-DIP through-hole module measuring 50.8 mm x 25.4 mm x 10.2 mm. It offers 500V DC input-to-output isolation and meets safety standards IEC/EN/UL 62368-1 and UL60950-1, with CE and cURus approvals.</p><p>&nbsp;</p><p>Designed for commercial ITE (Information Technology Equipment) applications, the EC5BE13 operates over an ambient temperature range of -25°C to +71°C with derating. It is suitable for board-level power distribution in industrial and telecom systems where isolated 15V supply is required.</p>

<p>The EC3SBW-24S05 is an isolated DC-DC converter module from Cincon Electronics, part of the EC3SBW series. It delivers a regulated 5V output at up to 3A (15W) from a nominal 24V input (9-36V range).</p><p>&nbsp;</p><p>Key specifications include an efficiency of 87% at full load, a switching frequency of 400 kHz, and 1500 VDC input-to-output isolation. The module features remote on/off control, overcurrent protection, overvoltage protection, short circuit protection, and under voltage lockout.</p><p>&nbsp;</p><p>The converter is housed in a 6-DIP through-hole package measuring 25.4mm x 25.4mm x 10.2mm (1"x1"x0.4"). It operates over a -40°C to +85°C temperature range with derating above 68°C. Cooling is by natural convection.</p><p>&nbsp;</p><p>Designed for ITE (commercial) applications, it meets safety standards IEC/EN/UL 62368-1. The module is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The EC4A16H is an isolated DC DC converter module manufactured by Cincon Electronics Co. LTD. It provides dual outputs of -5V with a total power rating of 5W, delivering 500mA per output. With an efficiency of 80%, it is suitable for commercial ITE applications.</p><p>&nbsp;</p><p>This converter features short circuit protection (SCP) and operates over a temperature range of -25°C to 71°C. It is approved by CE and cURus agencies, and complies with standard 60950-1. The component is mounted via through-hole technology in a compact 24-DIP module with 14 leads, measuring 31.8mm x 20.3mm x 10.2mm.</p>

<p>The EC3A21M is a 3W isolated DC-DC converter from the EC3A series by Cincon Electronics. It features a regulated 5V output at 600mA with a typical efficiency of 79% at nominal input and full load. The converter operates from a wide 18-36V input voltage range, with a nominal input of 24V. It is designed as an isolated module with 500VDC isolation, ensuring safe operation in many applications.</p><p>&nbsp;</p><p>The module includes continuous short circuit protection and can drive up to 2200µF capacitive load. The operating temperature range is -25°C to 71°C, making it suitable for industrial environments. The converter is housed in a 24-DIP module with 14 leads and a through-hole mounting style. Dimensions are 31.8mm x 20.3mm x 10.2mm.</p><p>&nbsp;</p><p>Typical applications include distributed power systems, telecom equipment, and battery-powered devices where a regulated isolated 5V supply is needed.</p>

<p>The Cincon CFB400W-48S48 is an isolated DC-DC converter module designed for commercial ITE applications. It accepts an 18-75VDC input and provides a regulated 48V output at up to 8.3A, delivering 399W of output power.</p><p>&nbsp;</p><p>Key electrical specifications include a typical efficiency of 89.5% at nominal input, remote on/off control with active-low enable, and built-in protection features: overcurrent (OCP), overtemperature (OTP), and overvoltage (OVP). The converter operates over a -40°C to +100°C case temperature range with derating.</p><p>&nbsp;</p><p>The module is housed in a standard Full Brick package measuring 116.8mm x 61.0mm x 12.7mm and features through-hole mounting for secure attachment to a PCB. It carries CE and cURus safety approvals to standard 60950-1.</p>

<p>The Cincon EC6A15 is a 7.5W isolated DC-DC converter in the EC6A series, delivering dual ±12V outputs from a 24V nominal (18-36V) input. Each output provides up to 310 mA, with a total power of 7.4W. The converter achieves 87% typical efficiency at full load and includes a 300 kHz switching frequency.</p><p>&nbsp;</p><p>Key electrical features include 1500 VDC input-to-output isolation, continuous short circuit protection (SCP), and a Pi input filter. The device supports a wide operating ambient temperature range of -40°C to +85°C with derating, and a maximum case temperature of 100°C. The converter can drive a maximum capacitive load of 2200 µF per output.</p><p>&nbsp;</p><p>The EC6A15 is housed in a 24-pin DIP module with 14 leads and through-hole mounting. Dimensions are 31.8 x 20.3 x 10.2 mm. It is designed without tantalum capacitors inside and carries safety certifications including CE and cURus to IEC/EN/UL 62368-1 and UL60950-1. The part is RoHS3 and REACH compliant (unverified).</p>

<p>The EC4A14 is an isolated DC DC converter module from Cincon Electronics Co. LTD. It delivers a regulated ±12V dual output with 230mA current per rail, providing a total power of 5.5W. The module achieves 82% efficiency and includes short circuit protection (SCP) for reliable operation.</p><p>&nbsp;</p><p>Housed in a 24-DIP through-hole package measuring 31.8mm x 20.3mm x 10.2mm, the EC4A14 is designed for commercial ITE applications. Its operating temperature range spans -25°C to 71°C, making it suitable for a variety of industrial and telecom environments. The isolated module topology ensures safe galvanic isolation between input and output.</p><p>&nbsp;</p><p>With 14 pins and a compact footprint, this converter can be easily integrated into printed circuit boards for distributed power architectures. The dual ±12V output is ideal for powering analog circuits, operational amplifiers, and other dual-rail devices.</p>

<p>The EC4A01 is an isolated DC/DC converter manufactured by Cincon Electronics Co. LTD. It provides a regulated 5V output at 1A, delivering 5W of power from a 9V nominal input. The unit features a through-hole mounting configuration in a 24-DIP module with 14 leads, measuring 31.8mm x 20.3mm x 10.2mm.</p><p>&nbsp;</p><p>This converter offers short circuit protection (SCP) and operates over a temperature range of -25°C to 71°C, making it suitable for commercial IT equipment applications. With an efficiency of 77%, it balances performance and heat dissipation in space-constrained designs.</p><p>&nbsp;</p><p>The packaging is a standard 24-DIP module, compatible with conventional through-hole assembly processes. The isolated module design provides galvanic isolation between input and output, enhancing system safety and noise immunity.</p>

<p>The EC5SBW-48S12 is a 30-watt isolated DC-DC converter from the EC5SBW series by Cincon Electronics. It accepts a wide 4:1 input voltage range of 18 to 75 VDC and provides a single regulated 12 VDC output at up to 2.5 A. The converter offers 1500 Vdc input-to-output isolation, making it suitable for industrial and commercial (ITE) applications requiring galvanic isolation.</p><p>&nbsp;</p><p>Key electrical specifications include a typical efficiency of 89%, fixed switching frequency, and comprehensive protection features: overcurrent protection (OCP), overvoltage protection (OVP), overtemperature protection (OTP), short-circuit protection (SCP), and under-voltage lockout (UVLO). The module also supports remote on/off control with positive logic (active high).</p><p>&nbsp;</p><p>The converter is housed in a compact 6-DIP through-hole package measuring 1.00 x 1.00 x 0.40 inches (25.4 x 25.4 x 10.2 mm). It operates over a temperature range of -40°C to 85°C with derating, and the case temperature can reach up to 105°C. The module is designed for standard industrial board-mount power supply applications.</p><p>&nbsp;</p><p>The EC5SBW-48S12 is approved to UL62368-1 and carries CB test certificate IEC62368-1 (mentioned in datasheet features). It is also CE marked and complies with the 60950-1 standard. RoHS compliance is indicated but unverified.</p>

<p>The Cincon EC4AB11 is a 5W isolated DC-DC converter from the EC4AB series. It provides a regulated 5V output at 1A from a nominal 24V input (18-36V range). Designed for commercial ITE applications, it offers reliable performance in a compact DIP package.</p><p>&nbsp;</p><p>Key specifications include a typical efficiency of 79%, output ripple and noise of 100 mV pk-pk maximum, voltage accuracy of ±2%, and a temperature coefficient of ±0.05%/°C. Input-to-output isolation is rated at 500 VDC minimum. The converter includes a pi input filter and continuous short circuit protection for robust operation.</p><p>&nbsp;</p><p>The module is housed in a 24-DIP package with 14 leads for through-hole mounting. Dimensions are 31.8 mm x 20.3 mm x 12.7 mm, with a non-conductive black plastic case. The operating temperature range is -25°C to 71°C.</p><p>&nbsp;</p><p>Compliance includes RoHS3 (low confidence, unverified), MSL 1, and REACH unaffected. The safety certification meets IEC/EN/UL 62368-1 as per the datasheet. Note: Some compliance data is unverified; confirmed values should be obtained from the manufacturer.</p>

<p>The Cincon EC3A06H is a 3-watt isolated DC-DC converter from the EC3A series, featuring a 2:1 input voltage range of 18-36V nominal with a 24V nominal input. It delivers regulated dual outputs of +15V and -15V, each capable of supplying up to 100mA of current. The module offers 3000V DC input-to-output isolation, making it suitable for applications requiring galvanic separation.</p><p>&nbsp;</p><p>Key electrical specifications include an efficiency of 75% at full load, an input current of 7.5mA under no-load conditions and 154mA at full load. The converter includes continuous short circuit protection (SCP) and is designed for a maximum capacitive load of 1000uF.</p><p>&nbsp;</p><p>The device is packaged in a 24-DIP module with 14 leads and a standard through-hole mounting type. Its dimensions are 31.8mm x 20.3mm x 10.2mm (1.25" x 0.80" x 0.40"). The operating temperature range is -25°C to 71°C. The EC3A06H is approved to UL60950-1 and complies with CE and cURus standards for ITE (commercial) applications.</p>

<p>The EC4A04H is an isolated DC-DC converter module from Cincon Electronics Co. LTD. It provides dual regulated outputs of +12V and -12V, each capable of delivering 230mA, for a total output power of 5.5W. The module achieves up to 83% efficiency and features short-circuit protection (SCP).</p><p>&nbsp;</p><p>This converter is designed for through-hole mounting in a standard 24-DIP package with 14 leads, measuring 31.8mm x 20.3mm x 10.2mm. It operates over a temperature range of -25°C to 71°C, making it suitable for a variety of industrial and telecom applications.</p><p>&nbsp;</p><p>The EC4A04H is approved to UL 60950-1 and carries CE and cURus safety markings. It is intended for use in board-mounted power supply designs requiring isolated dual bipolar outputs.</p>

<p>The EC5BE21 is a 15W isolated DC-DC converter module from the EC5BE series by Cincon Electronics. It accepts a 2:1 input voltage range of 36-72 VDC and provides a regulated 5V output at up to 3A, delivering 15W of power. The converter achieves a typical efficiency of 80% and features a pi-type input filter, continuous short circuit protection, and 500V input-to-output isolation. Switching frequency is 300 kHz.</p><p>&nbsp;</p><p>The module is housed in a six-sided shielded metal case with dimensions of 50.8mm x 25.4mm x 10.2mm (2.00" x 1.00" x 0.40"). It uses a through-hole 6-DIP package for board mounting. Operating temperature range is -25°C to 100°C with derating. The converter is approved to CE and cURus standards, meeting safety requirements of IEC/EN/UL 62368-1.</p>

<p>The Cincon CHB50-24S12 is an isolated DC-DC converter providing a regulated 12V output at up to 4.16A (50W). It operates from a minimum input voltage of 18V and achieves 88% typical efficiency. The module includes comprehensive protection: overcurrent (OCP), overtemperature (OTP), overvoltage (OVP), short-circuit (SCP), and undervoltage lockout (UVLO). Remote on/off control with an active-high enable simplifies system integration. The half brick package (61.0mm x 57.9mm x 12.7mm) uses through-hole mounting and supports a -40°C to +100°C operating range with derating. This module is designed for commercial ITE (Information Technology Equipment) applications and is certified to safety standard 60950-1 with CE and cURus approvals.</p>

<p>The Cincon EC6A16 is an isolated DC-DC converter from the EC6A series, delivering a regulated ±15V dual output. Each output is rated at 250 mA, providing a total power of 7.5W. The converter accepts a wide 2:1 input range of 18 to 36 VDC (nominal 24V) and achieves a typical efficiency of 84% at full load.</p><p>&nbsp;</p><p>Electrical characteristics include a switching frequency of 300 kHz, output voltage accuracy of ±2%, and a Pi-type input filter. The module features continuous short circuit protection and is designed without tantalum capacitors inside. Isolation is rated at 1500 VDC with an isolation capacitance of 560 pF and minimum isolation resistance of 10⁹ Ω. Maximum capacitive load is 2200 µF per output.</p><p>&nbsp;</p><p>The EC6A16 is housed in a 24-DIP through-hole package with 14 leads, measuring 31.8 mm x 20.3 mm x 10.2 mm. It operates over an ambient temperature range of -40°C to +85°C with derating above 71°C, cooled by natural convection. The converter carries CE and cURus approvals and meets UL60950-1 and IEC/EN/UL 62368-1 standards. It is intended for commercial ITE applications.</p>

<p>The Cincon CHB75W-48S24 is a high-performance isolated DC-DC converter from the CHB75W series, designed for industrial and commercial applications. It provides a regulated 24V output at 3.12A with a maximum power of 75W, operating from a wide 4:1 input voltage range of 18 to 75VDC (nominal 48V).</p><p>&nbsp;</p><p>Key electrical specifications include an efficiency of 85%, a switching frequency of 300kHz, and 1500VDC input-to-output isolation. The module incorporates comprehensive protection features including overcurrent (OCP), overvoltage (OVP), overtemperature (OTP), short circuit (SCP), and under voltage lockout (UVLO). Remote on/off control with positive logic (enable, active high) is provided.</p><p>&nbsp;</p><p>The converter is housed in a standard half brick package (61.0mm x 57.9mm x 12.7mm) with through-hole mounting. It operates over a temperature range of -40°C to +100°C (with derating) and is certified to UL60950-1, with CE and cURus approvals. The CHB75W-48S24 is suitable for ITE (commercial) equipment requiring a reliable, isolated 24V power rail.</p>

<p>The Cincon EC3A04H-E is a 3W isolated DC DC converter from the EC3A-E series. It accepts a 4.5-9 VDC input and provides dual regulated ±5V outputs, each rated for 300mA. The converter is housed in a 24-DIP through-hole package measuring 31.8mm x 20.3mm x 10.2mm.</p><p>&nbsp;</p><p>Key electrical specifications include 3000VDC minimum input-to-output isolation, over-current protection (OCP), short-circuit protection (SCP), and under-voltage lockout (UVLO). Efficiency is typically 77% at full load. The module includes a Pi input filter and requires no external tantalum capacitors.</p><p>&nbsp;</p><p>The EC3A04H-E is suitable for commercial ITE applications and is certified to IEC/EN/UL 62368-1 and meets EN55032 Class A EMI standards. Operating temperature range is -40°C to +100°C with derating.</p>

<p>The EC3A37H is an isolated DC-DC converter module from the EC3A series by Cincon Electronics Co. LTD. It provides a single regulated output of 3.3V at up to 600mA with a nominal output power of 2W. The converter accepts a wide input voltage range of 36V to 72V DC, making it suitable for 48V telecom and industrial applications.</p><p>&nbsp;</p><p>This module features a through-hole mounting style in a 24-DIP package with 14 leads, measuring 31.8mm x 20.3mm x 10.2mm. It includes short circuit protection (SCP) and offers an isolation voltage of 3000V DC minimum. The typical efficiency at nominal input and full load is 72%.</p><p>&nbsp;</p><p>The operating temperature range is -25°C to 71°C, allowing use in a variety of environments. The device is approved to safety standards including CE and cURus, and is designed for ITE (Commercial) applications. The package provides a compact solution for distributed power architectures.</p>

<p>The EC7B-48D15 is a 20-watt isolated DC-DC converter from Cincon's EC7B series. It provides dual regulated ±15V outputs with a rated current of 670mA per output and a minimum load of 42mA per output for proper regulation. The converter operates from a 36 to 75V DC input range and achieves a typical efficiency of 89% at nominal line, full load, and 25°C.</p><p>&nbsp;</p><p>This module features a fixed switching frequency of 350kHz and includes protection features such as overcurrent protection (OCP), overvoltage protection (OVP), short circuit protection (SCP), and under-voltage lockout (UVLO). It also supports remote on/off control with an active high enable function. The input-to-output isolation is rated at 1500 VDC.</p><p>&nbsp;</p><p>The EC7B-48D15 is housed in a 6-DIP through-hole package measuring 50.8mm x 25.4mm x 10.2mm. It is designed for natural convection cooling and operates over a temperature range of -40°C to 85°C with derating. The converter is approved to UL60950-1 and meets IEC/EN/UL 62368-1 safety standards.</p>

<p>The Cincon EC4BE16 is a 10W isolated DC-DC converter module in the EC4BE series. It accepts a nominal 48V input with a 36-72V range and provides dual regulated outputs of +5V and -5V, each capable of delivering up to 1A. The module achieves up to 80% efficiency and includes continuous short circuit protection (SCP).</p><p>&nbsp;</p><p>Designed for commercial ITE applications, the converter features 500V input-to-output isolation and a switching frequency of 200 kHz. It is housed in a compact 2.00" x 1.00" x 0.40" (50.8mm x 25.4mm x 10.2mm) six-sided shielded metal case with through-hole mounting in a 5-DIP module package.</p><p>&nbsp;</p><p>The operating temperature range is -25°C to +71°C with derating above 71°C. The module carries CE and cURus approvals to UL60950-1 and meets EN55032 Class A conducted emissions.</p>

<p>The Cincon EC4AW11 is an isolated DC-DC converter module designed for board-mount power conversion. It delivers a single regulated 5V output at 1A, with a total output power of 5W. The converter operates from a nominal 18V input and achieves a typical efficiency of 79%.</p><p>&nbsp;</p><p>This converter is packaged in a 24-DIP module with 14 leads and through-hole mounting, measuring 31.8mm x 20.3mm x 10.2mm. It features short circuit protection (SCP) and is approved under CE for ITE (Commercial) applications. The operating temperature range is -40°C to 85°C with derating.</p><p>&nbsp;</p><p>Designed for commercial information technology equipment, the EC4AW11 provides isolated power conversion in a compact, reliable form factor. The module is suitable for distributed power architectures requiring a 5V rail from an 18V bus.</p>

<p>The Cincon Electronics CHB50-48S24 is a 50W isolated DC-DC converter designed for commercial ITE applications. It provides a regulated 24V output from a nominal 48V input (minimum 36V) with a maximum output current of 2.08A. The converter achieves up to 89% typical efficiency, reducing power loss in demanding applications.</p><p>&nbsp;</p><p>This isolated module includes a comprehensive set of protection features: overcurrent protection (OCP), overtemperature protection (OTP), overvoltage protection (OVP), short-circuit protection (SCP), and under-voltage lockout (UVLO). Control features include remote on/off with active high enable. The device meets safety standards 60950-1 and carries CE and cURus approvals.</p><p>&nbsp;</p><p>The CHB50-48S24 is housed in a standard Half Brick package measuring 61.0mm x 57.9mm x 12.7mm (2.40" x 2.28" x 0.50") and uses through-hole mounting. It operates over a wide temperature range of -40°C to 100°C with derating. The converter is listed as RoHS3 compliant (unverified) and has MSL 1 (unlimited) moisture sensitivity level.</p>