Cinch

<p>The Cinch 131-1701-216 is a 50 Ohm SMB straight jack receptacle featuring a male pin center contact. It is designed for through hole PCB mounting with solder terminations for both the center contact and shield. The connector uses a snap-on fastening type for quick and secure mating.</p><p>&nbsp;</p><p>This connector supports frequencies up to 4 GHz and has a working voltage rating of 335 Vrms at sea level. The dielectric withstanding voltage is 1000 Vrms minimum at sea level, with a minimum insulation resistance of 1000 megohms. Initial center contact resistance is 6.0 milliohms.</p><p>&nbsp;</p><p>The housing is silver in color and the center contact is made of brass. The connector is suitable for RF applications requiring a reliable 50 Ohm interface in a compact SMB form factor.</p>

<p>The Cinch 105-1102-001 is a horizontal miniature tip jack designed for through-hole mounting. The red nylon 6/6 body provides mating end insulation and is UL rated for self-extinguishing. The contact is made of copper aluminum alloy with silver plating, offering low contact resistance of 0.010 ohms maximum. This tip jack is rated for 5 amps continuous current and has a minimum breakdown voltage of 2100 Vrms. Adjacent jack capacitance is limited to 1 pF maximum at 1 MHz. It accepts standard tip plugs with 0.080 inch (2.00 mm) diameter. The design protects the contact from flux and solder during assembly, and allows probe access from both ends. Termination is via solder to the PCB.</p>

<p>The BACC45FN12C12P is a circular connector assembly from Cinch, part of the BACC45 series qualified to MIL-C-26500. It features a receptacle with male pins, 12 power positions, and gold-plated contacts for reliable conductivity. The connector uses crimp termination and a bayonet lock coupling for secure mating. It is designed for panel mounting with a flange and includes a cable clamp feature. The shell is made of anodized aluminum, providing durability and corrosion resistance. Environmentally sealed, it offers ingress protection against moisture and contaminants. Electrical ratings include current capacities of 7.5A for size 20 contacts, 13A for size 16, and 23A for size 12, with a dielectric strength of 1500 VAC RMS and insulation resistance of 5000 MΩ minimum. The connector operates over a wide temperature range from -55°C to 200°C and withstands thermal shock, vibration up to 20 g, and shock of 50 g. It is suitable for aerospace, military, and industrial applications requiring high reliability in harsh environments.</p>

<p>The Cinch 2-140 is a Series 140 barrier block designed for reliable wire termination in industrial and power distribution applications. It features 2 circuits arranged in a double row configuration with a 0.375" (9.53mm) pitch. The block uses 5-40 x 3/16" combination screws for top termination and has a closed bottom design.</p><p>&nbsp;</p><p>Electrical ratings include 15A current and 250V voltage, with maximum power dissipation of 3750W per terminal. The insulation is molded from black phenolic material rated UL 94V-1, and the operating temperature range spans -55°F to +300°F. The block accepts wire sizes up to 16 AWG.</p><p>&nbsp;</p><p>Mechanical features include a flange for chassis or panel mounting. The open bottom design facilitates through-panel wiring. The screw terminals are steel with nickel plating, and solder terminals are brass with electro-tin plating.</p><p>&nbsp;</p><p>This barrier block is suitable for use in control panels, power supplies, and other equipment requiring secure, high-current connections. The double wall barriers provide additional protection against short circuits between adjacent terminals.</p>

<p>The 131-3701-811 is an SMB series jack connector from Cinch Connectivity Solutions. It features a male pin contact, 50 Ohm impedance, and operates from DC to 4 GHz. The connector is designed for edge board mounting with end launch style, and uses solder termination for both center and shield contacts. The body and center contact are made of brass with gold plating over nickel underplate. The working voltage is 335 Vrms at sea level, with dielectric withstanding voltage of 1000 Vrms. Contact resistance is 6.0 mΩ initial for center contact and 1.0 mΩ for outer contact. The connector uses a snap-on fastening type and has a single port. This connector is suitable for RF signal transmission in various applications including test and measurement, telecommunications, and aerospace.</p>

<p>The Cinch DB25P is a standard D-Sub connector plug designed for free hanging (in-line) mounting. It accommodates 25 male pin contacts arranged in 2 rows, with a DB-25 shell size (3/DB/B).</p><p>&nbsp;</p><p>Termination is via solder cups, allowing direct soldering of wires. The contacts are gold flashed for reliable signal transmission. The steel shell is finished with yellow chromate plated zinc for corrosion resistance. The insulator material is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>This connector is rated for 5A current per contact and is suitable for signal-level interconnections in a wide range of electronic equipment. The unthreaded housing/shell flange provides basic mounting without locking hardware.</p>

<p>The Cinch 105-0601-001 is a deluxe insulated tip jack designed for panel mounting. It features a machined brass contact with a beryllium copper spring and silver plating for reliable electrical performance. The nylon 6/6 body is UL rated for self-extinguishing. This jack accepts standard 0.080 in (2.00 mm) tip plugs and has a closed entry to block probes larger than 0.085 in (2.16 mm). Electrical ratings include 10A current, 5700Vrms minimum breakdown voltage, and contact resistance of 0.010 ohms maximum. The turret terminal allows easy soldering. Panel thickness up to 0.437 in (11.10 mm) is supported. Color is white.</p>

<p>The 105-0202-200 is a red tip jack from Cinch Connectivity Solutions, designed for panel mount applications. It features a female gender with turret termination and an insulated metal clad construction. The contact is machined from brass per QQ-B-626D with a beryllium copper spring per QQ-C-533, finished in gold. The body is Nylon 6/6 per ASTM D4066, and the threaded brass jacket is nickel plated. Hardware includes a nickel plated washer and nut (unassembled).</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 10 amps, minimum breakdown voltage of 5700 Vrms, maximum contact resistance of 0.004 ohms, and nominal contact-to-panel capacitance of 2 pF. The jack accepts standard tip plugs of .080" (2.00 mm) diameter and features a closed entry that blocks probes greater than .085" (2.16 mm). It is manufactured to meet MIL-C-39024/10 specifications.</p><p>&nbsp;</p><p>This tip jack is suitable for military or industrial applications requiring reliable, high-current connections. The panel mount design with turret termination simplifies wiring and provides a secure mechanical attachment. The red color aids in identification and circuit organization.</p>

<p>The Cinch 135-3711-202 is an MMCX straight jack receptacle designed for surface mount applications. It provides a 50 Ohm impedance and supports frequencies up to 6 GHz, making it suitable for RF and microwave interconnects.</p><p>&nbsp;</p><p>The connector uses a snap-on fastening mechanism and solder termination for both the center contact and shield. The center contact is made of beryllium copper, and the housing has a gold color. Electrical ratings include a working voltage of 170 Vrms and a dielectric withstanding voltage of 500 Vrms at sea level.</p><p>&nbsp;</p><p>This part is supplied in tape and reel packaging with 1500 pieces per reel. It is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The Cinch 133-3711-211 is an MCX straight jack receptacle designed for surface mount applications. It features a female socket contact with 50 Ohm impedance and operates over a frequency range of 0 to 6 GHz. The connector uses a snap-on fastening mechanism for secure mating and is terminated via solder contacts for both center and shield.</p><p>&nbsp;</p><p>The center contact is made of beryllium copper with gold plating over a nickel underplate, ensuring reliable electrical performance and durability. The housing is gold plated. This connector is intended for PCB mounting and is supplied in tape and reel packaging with 750 pieces per reel.</p><p>&nbsp;</p><p>Typical applications include RF modules, wireless communication systems, test equipment, and other high-frequency interconnect needs where a compact, reliable coaxial connection is required.</p>

<p>The Cinch 105-0603-001 is an insulated deluxe tip jack designed for reliable test and measurement connections. This female panel mount jack features a machined brass contact with beryllium copper spring and silver plating, ensuring low contact resistance (0.010 ohms maximum) and high current handling (10 amps). The nylon 6/6 body is UL approved for self-extinguishing and the mating end is insulated for safety. Termination is via a turret terminal, and the panel thread accepts thickness up to 0.437 in (11.10 mm). A nickel plated steel nut is included for mounting (unassembled). The breakdown voltage is 5700 Vrms minimum, and nominal contact-to-panel capacitance is 2 pF. The closed entry design blocks probes larger than 0.085 in (2.16 mm), preventing damage. This tip jack is commonly used in test equipment, power supplies, and instrumentation where a secure panel-mount connection for a standard 0.080 in (2.00 mm) tip plug is required.</p>

<p>The Cinch 108-0750-001 is a standard male banana plug designed for panel mount applications. It features a non-insulated hex body with a threaded stud for secure panel installation. Termination is via a solder lug, accommodating 14 AWG wire. This connector is part of Cinch's Banana and Tip Connectors family, suitable for test and measurement, RF, and general interconnect applications where a reliable, low-resistance connection is required. The panel mount design allows for permanent installation on chassis or test equipment panels.</p>

<p>The Cinch 27-8471 is a BNC to BNC adapter designed as a jack to jack (female to female) connector. It features a straight body style and a 50 Ohm impedance rating, with a maximum operating frequency of 4 GHz. The adapter is panel mount with a bulkhead mounting feature, allowing secure installation through a panel. Both ends utilize bayonet lock fastening for quick and reliable connections. The center contacts are gold plated for corrosion resistance and signal integrity. An isolated design helps prevent ground loops or unwanted electrical paths. This adapter is ideal for interconnecting BNC cables, test equipment, and RF systems requiring a 50 Ohm environment.</p>

<p>The ADT-2593-MF-SMA-02 is a straight SMA plug to SMA jack adapter from Cinch Connectivity Solutions. It converts an SMA female socket (jack) to an SMA male pin (plug) within the same series. The adapter is designed for 50 Ohm impedance and operates from DC to 18 GHz with a VSWR of 1.05 + 0.005f(GHz).</p><p>&nbsp;</p><p>The housing and nut are made of passivated stainless steel, the center contact is gold-plated beryllium copper, and the dielectric is PTFE fluorocarbon. The adapter features threaded fastening on both ends and is intended for free hanging (in-line) mounting.</p><p>&nbsp;</p><p>This adapter is RoHS compliant per 2002/95/EC. It is suitable for RF test and measurement, telecommunications, and other high-frequency interconnect applications requiring a reliable SMA in-line adapter.</p>

<p>The Cinch DA15S is a commercial-grade D-Sub connector assembly designed for signal interconnect applications. It is a 15-position receptacle with female sockets arranged in 2 rows, terminated via solder cup for reliable wire connections.</p><p>&nbsp;</p><p>Mechanically, the connector features a steel shell with yellow chromate zinc plating for durability and corrosion resistance. The free hanging (in-line) mounting allows flexible cable integration. Gold-plated contacts ensure low resistance and long-term reliability. The shell size is 2 (DA, A) with an unthreaded flange.</p><p>&nbsp;</p><p>Electrically, the DA15S is rated for 5 A current. The insulator material has a UL94 V-0 flammability rating. The connector is RoHS3 compliant and REACH unaffected, with MSL 1 classification. The solder cup termination simplifies assembly without special tooling.</p>