Cinch

<p>The 108-1722-101 is a standard banana plug designed for 16 AWG wire. It features a non-mating end insulated body and accepts solder or solderless termination. The male plug is intended for free hanging (in-line) mounting. The red color aids in identification. This banana plug is suitable for test and measurement, power distribution, and general interconnect applications. It is produced by Cinch, a trusted manufacturer of connectivity solutions, and belongs to the banana and tip connectors category.</p>

<p>The Cinch 105-0203-200 is a female tip jack designed for panel mounting with a turret terminal. It features a black nylon 6/6 body with a nickel-plated brass jacket and gold-plated brass contact with beryllium copper spring. The insulation is mating end insulated, metal clad. Electrical ratings include 10A current, 5700Vrms minimum breakdown voltage, 0.004 ohm maximum contact resistance, and 2 pF nominal capacitance. It accepts standard tip plugs of 0.080" (2.0mm) diameter. Hardware includes nickel-plated washer and nut (unassembled). Maximum panel thickness is 5.45mm. Manufactured to meet MIL-C-39024/10 specifications. Suitable for military or industrial applications.</p>

<p>The 142-0701-631 is an SMA jack receptacle from Cinch Connectivity Solutions. It features a 50 Ohm impedance and supports frequencies up to 18 GHz, making it suitable for RF and microwave applications. The connector uses a threaded coupling mechanism and a solder cup contact termination for reliable connections.</p><p>&nbsp;</p><p>This panel mount receptacle is designed with a flange for secure installation. The center contact is made of beryllium copper with gold plating, ensuring good conductivity and durability. The housing is also gold plated. As an uncabled receptacle, VSWR is not applicable.</p><p>&nbsp;</p><p>Typical applications include test and measurement equipment, communication systems, and aerospace electronics where a robust 50 Ohm interface is required. The connector is RoHS3 compliant (unverified) and has an MSL of 1 (unlimited).</p>

<p>The Cinch ADT-2589-MM-NNN-02 is a coaxial adapter designed for connecting two N-type male plugs in a straight, in-line configuration. It features a 50 Ohm impedance and supports frequencies up to 18 GHz, making it suitable for RF and microwave applications.</p><p>&nbsp;</p><p>This adapter uses threaded fastening on both ends for secure connections and has gold-plated center contacts for reliable signal transfer. The free hanging (in-line) mounting style allows for flexible integration into cable assemblies.</p><p>&nbsp;</p><p>As a same series adapter, it is ideal for extending or interconnecting N-type cables without changing connector series. The straight body design minimizes signal reflection and maintains consistent impedance through the connection.</p>

<p>The Cinch 12-142 is a 12-circuit barrier block designed for reliable power distribution and interconnection. It is rated for 30A at 250V and accepts 10 AWG wire. The block features a 14.30mm (0.563") pitch and uses screw top termination with a closed bottom. The dual-wall barrier design provides increased isolation between circuits. The block is black and includes a flange for secure chassis or panel mounting.</p>

<p>The Cinch 147-0801-601 is a 2.4mm series coaxial connector designed as a panel mount plug with a male pin center contact. It offers 50 Ohm impedance and supports frequencies up to 50 GHz, making it suitable for high-frequency RF applications.</p><p>&nbsp;</p><p>The connector uses a threaded fastening mechanism for secure mating and features a flange mounting style for panel installation. The center contact is made of beryllium copper, and both the contact and shield are terminated via solder. The housing is silver in color.</p><p>&nbsp;</p><p>This connector is part of Cinch's 2.4mm series and is designed for surface mount applications. It is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p>

<p>The 142-9701-301 is an SMA non-magnetic jack coaxial connector from Cinch Connectivity Solutions. It features a right angle through-hole mounting style with solder contact and shield termination. The connector is designed for 50 Ohm impedance and supports frequencies up to 18 GHz.</p><p>&nbsp;</p><p>This connector uses a threaded fastening type and a beryllium copper center contact material. The gold-plated housing provides corrosion resistance and reliable electrical performance. The non-magnetic construction makes it suitable for applications where magnetic interference must be minimized.</p><p>&nbsp;</p><p>The connector is RoHS3 compliant and has an MSL rating of 1 (unlimited). It is designed for printed circuit board mounting and is part of the Johnson brand of RF connectors from Cinch.</p>

<p>The DEU9S is a D-Sub receptacle from Cinch, designed with 9 female sockets arranged in 2 rows for signal applications. The contacts feature a gold flash finish, ensuring reliable conductivity and corrosion resistance. The shell is constructed from steel with a yellow chromate plated zinc finish, providing durability and EMI shielding. This connector uses crimp termination, allowing for flexible wire assembly without soldering. It is designed for free hanging (in-line) mounting, making it suitable for cable-to-cable or cable-to-panel connections where a fixed board mount is not required. The current rating is 5 A per contact, and the insulator material meets UL94 V-0 flammability rating. The DEU9S is RoHS3 compliant and REACH unaffected, meeting environmental standards. Typical applications include industrial control systems, data communication equipment, and network interface panels.</p>

<p>The Cinch ADT-2734-MM-3MM-02 is a precision in-series 3.5mm male to male coaxial adapter designed for high-frequency applications up to 30 GHz. It features rugged stainless steel construction with gold-plated center contacts for reliable signal integrity. The adapter provides low VSWR performance: 1.10:1 minimum from DC to 20 GHz, 1.15:1 minimum from 20 to 26.5 GHz, and 1.20:1 typical from 26.5 to 30 GHz. It is 100% swept frequency tested and meets MIL-C-39012 interface standards.</p><p>&nbsp;</p><p>This free-hanging (in-line) adapter uses threaded coupling on both ends for secure connections. It is suitable for high-end commercial, laboratory, test and measurement, calibration, and military applications. The compact physical package minimizes signal path length while maintaining consistent electrical performance.</p>

<p>The Cinch BJ72 is a TRB (Twinaxial/Triaxial) connector configured as a jack with a female socket (concentric) contact. It is designed for panel mounting with a bulkhead rear side nut and features a bayonet lock fastening mechanism for secure mating.</p><p>&nbsp;</p><p>This connector supports a non-constant impedance and is rated for operation up to 500 MHz. The center contact is made of beryllium copper, and both the contact and shield terminations are solder type (solder cup for contact, solder for shield). The housing is silver in color and includes a three-lug feature.</p><p>&nbsp;</p><p>The BJ72 is a single-port connector suitable for applications requiring reliable twinaxial or triaxial connections in a panel-mount configuration.</p>

<p>The BACC63CC20-41PN is a circular connector receptacle from Cinch Connectivity Solutions, part of the MIL-DTL-26500 and BACC63 series. It features 41 power contacts with male pins, gold plating over 50.0µin (1.27µm) thickness, and crimp termination for reliable wire connections.</p><p>&nbsp;</p><p>The aluminum shell with cadmium over nickel finish provides durability and shielding. The connector is panel mounted via a flange and secured with a bayonet lock coupling. It is environment sealed, rated for operation from -55°C to 200°C, and withstands 1500 VAC RMS dielectric strength. Each size 20 contact is rated for 7.5 A DC, with a minimum insulation resistance of 5000 MΩ.</p><p>&nbsp;</p><p>Designed for demanding applications, this connector meets MIL-C-26500 standards for vibration (20 g's, 12 hours sinusoidal), shock (50 g's), and moisture resistance (1000 MΩ minimum). The bayonet coupling offers 500 mating cycles durability. Packaging is bulk.</p>

<p>The 142-1404-001 is an SMA straight plug connector from Cinch Connectivity Solutions. It features a male pin contact and is designed for 50 Ohm impedance systems with a maximum operating frequency of 12.4 GHz. The connector uses a threaded fastening mechanism for secure mating and a full crimp termination style for both shield and contact. The center contact is made of beryllium copper and the housing is gold plated. This connector is suitable for use with RG-188DS and RG-316DS coaxial cables. It is a free-hanging (in-line) mount type, making it ideal for cable assembly applications where a reliable RF connection is required.</p>

<p>The 142-1407-001 is an SMA plug connector from Cinch Connectivity Solutions, designed for use with RG-58, RG-141, and RG-303 coaxial cables. It features a male pin center contact and a threaded fastening mechanism for secure connections.</p><p>&nbsp;</p><p>This connector offers a 50 Ohm impedance and supports frequencies up to 12.4 GHz, making it suitable for RF applications. The housing is gold-plated, and the center contact is made of beryllium copper for reliable performance.</p><p>&nbsp;</p><p>The connector is free hanging (in-line) mounted and uses a push on contact termination for the center conductor, while the shield is terminated via crimp. The manufacturer specifies a full crimp termination style for the cable.</p><p>&nbsp;</p><p>It is RoHS3 compliant and has an MSL of 1 (unlimited). The part is commonly used in telecommunications, test equipment, and other RF systems requiring a compact, high-frequency SMA connection.</p>

<p>This Cinch SMP coaxial connector (part number 127-1701-201) is a male pin receptacle designed for 50 Ohm characteristic impedance and operates up to 12 GHz. It features a through hole mounting style with solder termination for both contact and shield, ensuring reliable electrical connections.</p><p>&nbsp;</p><p>The connector uses a snap-on fastening mechanism for quick mating and includes a limited detent feature, making it suitable for applications where controlled engagement force is desired. The center contact is made of beryllium copper, providing good conductivity and mechanical endurance.</p><p>&nbsp;</p><p>The housing has a silver color. It is designed for printed circuit board mounting and is part of Cinch's SMP series, widely used in RF and microwave applications where space and performance are critical.</p>

<p>The Cinch ADT-2672-BF-SMM-02 is a between series coaxial adapter designed to connect a BNC female connector to an SMA male connector. It supports 50 Ohm systems and is rated for frequencies up to 8 GHz, making it suitable for a wide range of RF applications.</p><p>&nbsp;</p><p>The adapter features a straight body design with free hanging in-line mounting. The BNC side uses a bayonet lock for quick connection, while the SMA side uses threaded coupling for a secure, vibration-resistant fit. Center contacts are gold plated to ensure low resistance and corrosion resistance.</p><p>&nbsp;</p><p>This adapter is commonly used in test and measurement, telecommunications, and broadcast equipment where interconnecting BNC and SMA interfaces is required. Its compact straight design minimizes signal degradation and maintains impedance matching.</p>

<p>The BACC63BV14F4PN from Cinch is a circular connector receptacle qualified to Boeing BACC63 and MIL-C-26500 specifications. It features 4 power contacts with gold plated pins, housed in an aluminum shell with cadmium over nickel finish. The connector is designed for panel mount applications with a flange and threaded coupling for secure mating. It is environmentally sealed and shielded, providing protection against moisture and electromagnetic interference. Termination is via crimp contacts, facilitating field wiring. The operating temperature range spans -55°C to 200°C, making it suitable for demanding environments. The cable opening accommodates 0.609" (15.47mm) diameter cables. This connector is ideal for aerospace, defense, and industrial systems requiring reliable power connections in harsh conditions.</p>

<p>The Cinch BACC45FN20-41P is a circular connector assembly qualified to MIL-C-26500 and part of the C48 series. It is a receptacle with male pins, offering 41 power contacts. The shell is made of aluminum with an anodized finish, and it has a shell size of 20-41. This connector is designed for panel mount with a bayonet lock fastening type, ensuring secure mating. The contacts are terminated via crimp and feature a gold finish for reliable conductivity. It is environment sealed and operates over a temperature range of -55°C to 200°C. Electrically, it provides a minimum insulation resistance of 5000 MΩ and a dielectric strength of 1500 VAC RMS. The bayonet coupling is rated for a minimum of 500 mating cycles. This connector is unshielded and suitable for applications requiring robust environmental protection.</p>

<p>The 105-0752-001 is a red tip jack connector manufactured by Cinch Connectivity Solutions. It is a female connector designed for standard tip plugs with a diameter of 2.00 mm (0.080 in). The connector features a through hole mounting style that supports both horizontal and vertical orientations, with solder termination. The mating end is insulated to protect against flux and solder during assembly. The body is made of Nylon 6/6 per ASTM D4066, which is UL approved for self-extinguishing properties. The contact is made of copper aluminum alloy with silver plating. Electrical ratings include a current rating of 5 A, a breakdown voltage of 2100 Vrms minimum, contact resistance of 0.005 ohms (gold) or 0.010 ohms (silver), and adjacent jack capacitance of 1 pF at 1 MHz. This tip jack is suitable for test and measurement applications, providing reliable connections in PCB designs. The red color aids in visual identification. The connector is RoHS3 compliant and REACH unaffected, with MSL level 1 unlimited.</p>

<p>The Cinch 105-2210-201 is a vertical test jack designed for PCB mounting. It is a female tip jack with solder termination, insulated with blue nylon 6/6 body. The contact is made of beryllium copper with silver finish. It accepts standard tip plugs of 0.080 in (2.00 mm) diameter. Electrical ratings include a current rating of 5 amps and a breakdown voltage of 3500 Vrms minimum. Contact resistance is 0.005 ohms maximum for gold finish and 0.010 ohms for silver. Capacitance between adjacent jacks is 1 pF maximum at 1 MHz. The jack is vertical mount, suitable for compact PCB layouts. The spring-loaded lead holds the board securely, and the contact is protected from flux and solder during assembly. The nylon body is UL approved for self-extinguishing. This part is commonly used in test and measurement equipment, as well as harsh environment applications.</p>