TE Connectivity

<p>The TE Connectivity 1375820-3 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. It features a receptacle (female) housing with 3 positions arranged in a single row at a 2.54mm (0.100") pitch. The housing accepts crimp-type female socket contacts and uses a locking ramp fastening system for secure mating. It is intended for free hanging (in-line) mounting, making it suitable for cable assembly applications.</p><p>&nbsp;</p><p>The housing is white in color and rated for an operating temperature range of -55°C to 105°C. As a housing only, mating contacts and the corresponding plug housing must be ordered separately. This product is commonly used in various electronic interconnection systems where reliable, compact, and low-cost connectivity is required.</p>

<p>The TE Connectivity 60618-5 is a loose-piece pin contact from the Commercial MATE-N-LOK series, designed for 18-24 AWG wire (0.2-0.9 mm²). It features a crimp termination and a brass base material with a 0.76µm (30µin) gold finish over the mating area and wire barrel, with a 1.27µm (50µin) nickel underplating on the entire terminal. The contact accepts a maximum insulation diameter of 2.54 mm and has an overall length of 20.45 mm. It is supplied in individual form, not as a continuous strip, and is suitable for use in rectangular connector systems requiring reliable signal or power connections.</p>

<p>The TE Connectivity 929504-1 is a 4-position receptacle housing from the Junior Power Timer series. It features a 5.00mm pitch and 2 rows with a row spacing of 5.60mm. The housing is made of black PBT material and is designed for free hanging (in-line) mounting. It accepts female socket contacts with crimp termination and supports a maximum wire size of 2.5mm² FLR. This housing is suitable for use with mating connector housing 929505 and Junior Power Timer contacts 1355046.</p>

<p>The TE Connectivity 160834-5 is a stacked quick connect terminal designed for reliable wire-to-wire connections. It features both female and male tab configurations on a single terminal, with a tab width of 0.250 inches (6.35mm), thickness of 0.032 inches (0.81mm), and length of 0.305 inches (7.75mm). The overall length of the terminal is 23.55mm (0.927 inches).</p><p>&nbsp;</p><p>This terminal accepts wire gauges from 16 to 22 AWG and uses a crimp termination method for secure attachment. The contact is made of phosphor bronze with a tin finish, providing good conductivity and corrosion resistance. The non-mating end is insulated, offering protection where the wire is crimped, and the terminal is color-coded red for easy identification.</p><p>&nbsp;</p><p>Designed for free hanging (in-line) mounting, this terminal is suitable for applications requiring quick disconnect capabilities. It is commonly used in automotive, appliance, and industrial control systems where reliable and repeatable connections are needed.</p>

<p>The TE Connectivity 61299-1 is a non-insulated wire splice connector designed for reliable crimp termination. It accepts wire gauges from 7000 to 12000 CMA and features an open band, ridged terminal type for secure mechanical and electrical connections.</p><p>&nbsp;</p><p>This splice connector uses a crimp termination style and is non-insulated, making it suitable for applications where insulation is not required or where additional heat shrink or tape is applied. The ridged design provides enhanced grip during crimping.</p><p>&nbsp;</p><p>The number of wire entries varies by wire size, offering flexibility for different splicing configurations. The connector is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 292254-6 is a rectangular connector adapter designed to connect two plug male pin connectors together. It features 6 positions arranged in a single row with a 2mm (0.079") pitch, making it suitable for compact wire-to-wire or wire-to-board applications.</p><p>&nbsp;</p><p>This adapter uses panel mount snap-in installation, providing secure mechanical retention without additional hardware. Both adapter ends are plug male pins, allowing direct mating with female receptacles.</p><p>&nbsp;</p><p>Typical applications include internal wiring in industrial equipment, automotive electronics, and consumer appliances where a reliable and space-efficient connection is needed. The 2mm pitch supports moderate density interconnects in constrained spaces.</p>

<p>The 2-520273-2 is a quick connect receptacle from TE Connectivity, designed for 18-22 AWG wire. It features a female terminal with standard tab widths of 0.110" (2.79mm) and 0.125" (3.18mm). The connector is fully insulated and uses a crimp termination for secure wire attachment. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. The mounting type is free hanging (in-line), making it suitable for wire harness applications. The overall length is 18.67mm (0.735"). The color is red for easy identification. The part is listed as RoHS3 compliant, REACH unaffected, and has an MSL of 1 (Unlimited).</p>

<p>The TE Connectivity 926410-1 is a natural-colored housing designed for 0.110" (2.79mm) quick connect male tab terminals. It accommodates a single position and is intended for free hanging (in-line) mounting applications. This housing is part of the TE Connectivity quick connect terminal system and is compatible with 0.110" (2.79mm) quick connect disconnects.</p><p>&nbsp;</p><p>Constructed for reliable performance, the housing provides insulation and protection for the terminal connection. The natural color indicates the material composition. The component is compliant with EU RoHS, EU ELV, China RoHS, and EU REACH regulations, and is halogen-free per TE's low halogen specification.</p><p>&nbsp;</p><p>Typical applications include wire-to-wire or wire-to-board connections where quick connect/disconnect functionality is required. The one-position housing simplifies single-wire termination in control panels, appliances, and automotive systems. The free hanging design allows for easy installation without panel mounting.</p>

<p>The TE Connectivity 3-643814-7 is a 7-position rectangular connector designed for wire-to-board or cable-to-board applications. This receptacle features a free hanging (in-line), right angle mounting style with IDC (Insulation Displacement Contact) termination for 24 AWG discrete or ribbon cable.</p><p>&nbsp;</p><p>The connector has a single row of contacts with a 2.54mm pitch. The female socket contacts are made with a tin finish (80.0µin thickness) and the housing is white. A locking ramp fastening type ensures secure mating. The closed end design prevents contact damage and provides a finished appearance.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring a reliable, low-profile connection in internal wiring harnesses and cable assemblies. The IDC termination allows for quick assembly without stripping or soldering.</p>

<p>The TE Connectivity 643075-3 is a rectangular connector accessory designed for use with MTA-100 series connectors. It serves as both a cap (cover) and strain relief for 3-position connectors. The closed end design provides protection and strain relief for the connected wires.</p><p>&nbsp;</p><p>This part is compliant with EU RoHS 2011/65/EU, EU ELV 2000/53/EC, and is REACH unaffected. It is classified as low halogen and MSL level 1. Please note that this part is marked as obsolete.</p>

<p>The 66601-9 is a Type III+ stamped crimp socket contact manufactured by TE Connectivity. It is designed for signal applications and accepts 14-18 AWG (0.80-2.00 mm²) discrete wire. The contact features a brass base material with tin plating on both the mating area and termination end, providing reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The contact includes an insulation support and a stainless steel spring. With a pin diameter of 1.57 mm and contact size 16, it is suitable for use with VDE and CPC connectors. The termination method is crimp, and parts are supplied loose piece in a standard package quantity of 1000 per box. This part is rated as commercial grade and is RoHS compliant.</p>

<p>The TE Connectivity 926820-4 is a non-insulated flag-style quick disconnect receptacle designed for reliable wire-to-tab connections. It accepts 15.5-20 AWG wire and features a 0.250" (6.35mm) tab width with a 0.032" (0.81mm) tab thickness. The right-angle flag configuration allows for space-saving inline mounting.</p><p>&nbsp;</p><p>The terminal uses a crimp termination style and is constructed from tin-plated brass for good conductivity and corrosion resistance. As a non-insulated part, it is suitable for applications where insulation is not required or where additional insulation is applied separately.</p><p>&nbsp;</p><p>This component is RoHS3 compliant and has an MSL of 1 (unlimited). It is commonly used in power distribution, appliance wiring, and automotive electrical systems where quick disconnect functionality is needed.</p>

<p>The TE Connectivity 3-644346-4 is a 6-position, single row, unshrouded header designed for board-to-cable/wire applications. It features a 2.54mm (0.100") pitch and through hole mounting with solder termination. The header uses square male pin contacts made of copper alloy with a tin finish (150.0µin / 3.81µm thickness). The insulator is natural colored thermoplastic with a UL94 V-0 flammability rating. The overall contact length is 0.505" (12.83mm) with a contact length of 7.49mm (0.295") and an insulation height of 2.54mm (0.100"). This component is rated for 250VAC and has an operating temperature range of -55°C to 105°C. Current rating varies by wire gauge. The part is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 1-1703062-2 is a rectangular connector housing designed for use with MATE-N-LOK connectors. It is a 2-position receptacle housing with 2 rows, accepting male or female contacts (sold separately). The housing features a locking ramp fastening mechanism for secure mating and is designed for panel mount snap-in installation, providing easy assembly. The operating temperature range is -55°C to 125°C, suitable for a wide range of environments. The housing is natural in color and uses crimp termination for contacts. This housing is RoHS3 compliant and REACH unaffected (unverified). It is commonly used in automotive, industrial, and consumer applications requiring reliable connections.</p>

<p>The TE Connectivity 31895 is a PIDG series ring terminal designed for reliable connections in demanding environments. It accepts 16-22 AWG wire and fits a 5/16 stud. The terminal features a tin-plated copper contact with inner serrations for maximum electrical contact and tensile strength. A nylon insulation sleeve provides electrical isolation and is color-coded red for easy wire size identification. The crimp termination ensures a secure, vibration-resistant connection. Rated for 300V and 105°C operation, this terminal is suitable for use in instruments, controls, lighting, power supplies, and transportation applications. It is free hanging (in-line) mounting type and has a serrated termination for improved grip.</p>

<p>The TE Connectivity 172339-1 is a rectangular connector housing designed for plug applications. It accommodates 6 positions arranged in 2 rows with a 4.14mm pitch and row spacing. The housing uses a latch lock fastening mechanism for secure mating. It is intended for use with crimp contacts (male or female, not included). The housing is natural in color and made of suitable thermoplastic material. Operating temperature range is -20°C to 105°C. It is free hanging (in-line) mounted, suitable for wire-to-wire or wire-to-board applications. The housing is RoHS3 and REACH compliant (unverified). This connector is part of the TE Connectivity AMP series.</p>

<p>The 794896-3 is a rectangular connector housing manufactured by TE Connectivity. It is a receptacle type housing with 2 positions arranged in 2 rows with a row spacing of 4.14 mm. The housing is designed for panel mount snap-in installation and uses a locking ramp fastening mechanism for secure mating.</p><p>&nbsp;</p><p>This housing accepts male or female crimp contacts and is compatible with wire sizes from 0.12 to 0.8 mm² and insulation diameters from 1.27 to 2.11 mm. The housing is made of silicone rubber and is natural in color.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 90°C. The housing is packaged in bags of 1600 units.</p>

<p>The TE Connectivity 66359-9 is a crimp pin contact designed for use in circular connectors and other interconnect systems. This stamped contact is made from brass with a gold finish, providing reliable conductivity and corrosion resistance. The contact accepts wire gauges from 14 to 18 AWG and is terminated via crimping. The gold plating thickness is 15.0 microinches (0.38 micrometers). This contact is RoHS compliant and has a moisture sensitivity level of 1 (unlimited). It is typically used in commercial signal and power applications. The part is available in strip form and is compatible with TE's Type III+ pin assembly. For installation, appropriate crimp tools are required.</p>

<p>The TE Connectivity 2013499-1 is a USB 2.0 micro B receptacle connector designed for reliable data and power connections in compact electronic devices. It features 5 contacts in a single port, with a horizontal mounting orientation and a combination of surface mount and through-hole termination for robust mechanical attachment.</p><p>&nbsp;</p><p>This connector is rated for currents up to 1.8A and a voltage of 30V, making it suitable for both signal and moderate power delivery applications. It is unshielded and includes solder retention features to enhance durability during assembly and use. The operating temperature range of -30°C to 85°C allows deployment in a variety of environments.</p><p>&nbsp;</p><p>The 2013499-1 is part of TE Connectivity's micro USB connector family, known for high mating cycle durability (10,000 cycles). Its compact footprint and right-angle design make it ideal for space-constrained PCB layouts in consumer electronics, industrial controls, and portable devices.</p>

<p>The TE Connectivity 282837-3 is a 3 position wire to board terminal block designed for reliable PCB connections. It features a 5.08mm pitch and a single level configuration, accepting wire gauges from 16 to 30 AWG. The terminal block uses a screw rising cage clamp termination mechanism, ensuring secure wire retention with a recommended tightening torque of 0.5 Nm.</p><p>&nbsp;</p><p>Electrical ratings include a maximum current of 13.5 A and a maximum voltage of 300 V, with a contact resistance of less than 15 mOhm and insulation resistance greater than 1000 MOhm at 500 VDC. The operating temperature range spans from -40°C to +110°C, making it suitable for a variety of environments.</p><p>&nbsp;</p><p>Mechanically, the component is through hole mounted with a horizontal mating orientation relative to the board. The green housing is made of PA 6-6 with a UL 94-V0 flammability rating. The clamping screw is M3 brass with nickel plating, while the clamp and terminal materials are brass with nickel or tin plating respectively. A side interlocking feature allows for secure stacking of multiple units.</p>

<p>The TE Connectivity 3-647166-4 is a 4-position, single-row male pin header connector designed for board-to-cable/wire applications. It features a 2.54mm pitch and surface mount termination with solder contacts. The connector is shrouded with a single wall and includes a friction lock for secure mating. The insulation is made of black polyamide (PA46) Nylon 4/6, rated UL94 V-0 for flammability. The contacts are square-pin, tin-plated copper alloy with a length of 7.37mm. The operating temperature range is -55°C to 105°C. Voltage rating is 250VAC, and current rating varies by wire gauge. This connector is suitable for applications requiring reliable connections in confined spaces.</p>

<p>This 5-position receptacle is part of TE Connectivity's IDC connector family, featuring a 2.54mm pitch spacing. It terminates to 24 AWG discrete or ribbon cable using insulation displacement contacts, eliminating the need for wire stripping. The free hanging, right angle mounting allows for flexible cable routing in tight spaces. The housing is white with a locking ramp for secure mating. Contacts are tin plated with 80µin thickness for reliable conductivity. This connector is closed end, suitable for cable end terminations. It is RoHS and REACH compliant (unverified). Ideal for use in wire-to-board or wire-to-wire applications in consumer electronics, industrial controls, and automotive systems.</p>

<p>The TE Connectivity 521368-2 is a fully insulated FASTON quick disconnect receptacle from the Ultra-Pod series, designed for reliable one-step termination. It accommodates 18-22 AWG wire with a crimp termination (F-Crimp) and features a 0.250" (6.35mm) tab width for standard quick disconnect mating. The contact is made of tin-plated brass, ensuring good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This receptacle is fully insulated with a natural color housing, providing protection against shock and short circuits. It is rated for 600V applications and meets UL 94 V-2 and V-0 flammability standards, making it suitable for a wide range of environments. The free hanging (in-line) mounting style allows for easy integration into wire harnesses.</p><p>&nbsp;</p><p>Typical applications include household appliances, HVAC equipment, lawn and garden tools, industrial machinery, vending machines, automotive, marine, and consumer electronics. The Ultra-Pod design enables high-speed automatic application, reducing assembly time and cost.</p>

<p>The TE Connectivity 160668-2 is a non-insulated quick connect receptacle designed for wire-to-wire or wire-to-board connections. It accepts 15.5-20 AWG wire and features a 0.110" (2.79mm) tab width for mating with standard quick disconnect tabs.</p><p>&nbsp;</p><p>This terminal uses a crimp termination style for secure and reliable connections. The contact is made of brass with a tin plating, providing good conductivity and corrosion resistance. The overall length is 15.00mm (0.591"), with a tab length of 5.50mm (0.217") and tab thickness of 0.81mm (0.032").</p><p>&nbsp;</p><p>The part is free hanging (in-line) mounted and is non-insulated, making it suitable for applications where insulation is not required. It is classified as a standard terminal type and is female gender.</p><p>&nbsp;</p><p>Compliance includes RoHS3, REACH unaffected, and MSL level 1 unlimited, though these are unverified. No electrical ratings are specified.</p>

<p>The TE Connectivity 967543-1 is a socket-type rectangular connector contact designed for 13-15 AWG wire. This contact uses a crimp termination method and features a tin contact finish.</p><p>&nbsp;</p><p>The part is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited) and is REACH unaffected.</p><p>&nbsp;</p><p>This contact is intended for use in rectangular connector housings, providing reliable electrical connections in a variety of applications. The specifications are based on existing database records, and the contact finish of tin has been confirmed, though some data such as contact material and packaging details are not available.</p>

<p>The TE Connectivity 927231-7 is a 9-position receptacle housing from the Universal Mate-N-Lok series. It is designed for wire-to-wire or wire-to-board connections in a variety of applications. The housing features a panel mount configuration with latch lock fastening for secure mating. Contacts are terminated via crimp, and the housing accepts male or female contacts (sold separately).</p><p>&nbsp;</p><p>The housing is rated for an operating temperature range of -55°C to 125°C, making it suitable for harsh environments. It carries a V-0 flammability rating and is glow wire compliant, meeting safety standards for use in appliances and industrial equipment. The natural color housing is made from a high-performance thermoplastic.</p><p>&nbsp;</p><p>This part is a replacement for the 927231-5, offering improved flame retardance and glow wire performance. It is part of TE's Universal Mate-N-Lok connector system, which provides reliable, high-density connections in power and signal applications.</p>

<p>The TE Connectivity 183079-1 is a circular connector receptacle housing designed for use with male pins. It features 9 positions arranged in a shell size 13-9 configuration, with contact size 16. The housing is made of glass-filled polyamide (PA66/Nylon 6/6) and is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>This housing uses a threaded fastening mechanism and is keyed for proper orientation. It is unshielded and intended for free hanging (in-line) mounting. The black housing accommodates crimp contacts, making it suitable for field-installable or repair applications.</p><p>&nbsp;</p><p>Typical applications include industrial control systems, automotive wiring, and general-purpose interconnect solutions where a robust, lightweight housing is required. The material choice provides good mechanical strength and thermal resistance.</p>

<p>The TE Connectivity 1445093-3 is a 3-position, single row, shrouded header designed for board-to-cable/wire applications. It features a 3.00mm pitch and through hole mounting with both press-fit and solder termination options. The header is fully shrouded with a 4-wall design and includes a locking ramp for secure mating. The insulation is black polyamide (PA) nylon with a UL94 V-0 flammability rating. Contacts are made of brass with a tin-lead finish and a square pin shape. The operating temperature range is -40°C to 105°C. The header is rated for 250V and current rating varies by wire gauge. A board guide feature aids in alignment during assembly.</p>

<p>The TE Connectivity 5177984-3 is a plug connector with center strip contacts, designed for board-to-board mezzanine stacking applications. It features 80 positions arranged in 2 rows with a 0.80mm pitch. The connector is surface mount and supports mated stacking heights of 5mm, 9mm, 13mm, and 17mm.</p><p>&nbsp;</p><p>Contacts are made of brass with a gold finish in the engagement area (minimum 0.0002 inches) and a matte-tin finish on the soldering area. The housing is liquid crystal polymer (LCP) rated UL94 V-0. The connector also includes a board guide for alignment during assembly.</p><p>&nbsp;</p><p>This plug is part of a series that allows for flexible stacking height combinations by pairing with a corresponding receptacle. The product is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The 1-406541-1 from TE Connectivity is a modular jack connector designed for Ethernet applications. It features an 8p8c (RJ45) configuration with a single port, right angle orientation, and through hole mounting for secure PCB attachment. The connector is shielded with an EMI finger to reduce electromagnetic interference, and it includes a board guide for easy alignment during assembly. Contacts are made of phosphor bronze with gold plating, ensuring reliable connectivity and corrosion resistance. This jack is rated for Cat5 performance, making it suitable for 10/100Base-T Ethernet networks. It does not include an LED indicator. The tab direction is up, and termination is via solder joints.</p>

<p>The 1473005-4 is a 200 position SODIMM socket designed for DDR2 SDRAM modules, manufactured by TE Connectivity. This connector features a surface mount, right angle orientation, making it suitable for compact designs where space is at a premium.</p><p>&nbsp;</p><p>The socket includes board guide and latches for secure module retention. Contacts are finished with gold flash for reliable electrical connections. The mounting feature is standard top, normal type. This component is RoHS3 compliant and has an MSL rating of 1 (unlimited).</p>