Film Capacitors

<p>The ECQ-V1J105JM3 is a stacked metallized polyester film capacitor from Panasonic. It offers a capacitance of 1 µF with a tolerance of ±5% and a rated voltage of 63 VDC. The capacitor is designed for general purpose applications and noise suppression in logic circuits.</p><p>&nbsp;</p><p>This capacitor features a dissipation factor of ≤1.0% at 20°C and 1 kHz, and an insulation resistance of ≥1000 MΩ at 20°C with 100 VDC applied for 60 seconds. The withstand voltage is 94.5 V for 60 seconds between terminals. The operating temperature range is -40°C to +105°C, with a derating factor of 2.5%/°C above 85°C.</p><p>&nbsp;</p><p>The component is packaged in a radial leaded through-hole configuration with PC pin terminals. The lead spacing is 5.00 mm, and the dimensions are 10.20 mm length, 6.90 mm width, and 16.00 mm height. The lead form is crimped taping (Ammo) as indicated by the suffix M3.</p><p>&nbsp;</p><p>The capacitor is RoHS compliant and suitable for automatic insertion due to its small size and large capacitance. It is a non-inductive construction providing excellent electrical characteristics.</p>

<p>The Panasonic ECQ-E6104KF is a metallized polyester film capacitor designed for general-purpose applications. It offers a capacitance of 0.1 µF with a ±10% tolerance and a DC voltage rating of 630 V. The capacitor uses a metallized polyester dielectric, providing stable performance and self-healing properties.</p><p>&nbsp;</p><p>This component is housed in a radial through-hole package with PC pin terminations. The lead spacing is 15.00 mm, and the overall dimensions are 18.50 mm in length, 6.30 mm in width, and a seated height of 15.00 mm. It operates over a temperature range of -40°C to 105°C.</p><p>&nbsp;</p><p>The ECQ-E6104KF is suitable for general-purpose filtering, coupling, decoupling, and bypass applications in power supplies and industrial electronics. Its high voltage rating makes it appropriate for circuits requiring 630 VDC blocking or filtering. The part is RoHS3 compliant and has an MSL of 1 (unlimited).</p>

<p>The KEMET C4CSWUC3150AA1J is a polypropylene metallized film capacitor from the C4C series, designed for printed circuit board mounting with axial round package. It offers a capacitance of 0.15 µF with ±5% tolerance and is rated for 2000 VDC and 700 VAC. Key electrical characteristics include a low dissipation factor of ≤5x10⁻⁴ at 1 kHz and a high insulation resistance expressed as a time constant of 3000 s. The capacitor is self-healing, low loss, and suitable for high frequency applications. Typical applications include snubber, clamping, resonance, coupling/decoupling, pulse, and blocking circuits. The component is housed in an axial round body with tinned copper wire leads, and is supplied in bulk packaging. It operates over a temperature range of -40°C to +85°C. Compliance includes RoHS3, REACH unaffected, and MSL 1 unlimited.</p>

<p>The Panasonic ECQ-E4103KF is a metallized polyester film capacitor with a capacitance of 10000 pF (0.01 µF) and a DC voltage rating of 400V. It has a tolerance of ±10% and operates over a temperature range of -40°C to +105°C.</p><p>&nbsp;</p><p>This capacitor uses a metallized polyester dielectric, which provides self-healing properties and stability. The component is designed for general purpose applications such as bypass, coupling, and filtering circuits where reliable performance is required.</p><p>&nbsp;</p><p>The ECQ-E4103KF is packaged in a radial leaded case with dimensions of 10.30mm length, 4.30mm width, and 8.40mm height seated. The lead spacing is 7.50mm and termination is via PC pins, making it suitable for through-hole mounting on printed circuit boards.</p>

<p>The Panasonic ECQ-E4473KF is a metallized polyester film capacitor with a capacitance of 0.047 µF and a tolerance of ±10%. It is rated for 400V DC operation and is designed for general purpose applications.</p><p>&nbsp;</p><p>This capacitor features a radial through-hole package with PC pin terminations and a lead spacing of 10.00mm. The body measures 12.00mm in length, 5.00mm in width, and 9.30mm in height. It operates over a temperature range of -40°C to 105°C.</p><p>&nbsp;</p><p>The metallized polyester dielectric provides stable performance and self-healing properties, making it suitable for coupling, decoupling, and bypass circuits in various electronic equipment.</p>

<p>The ECQ-E1225KZ is a metallized polyester film capacitor from Panasonic Electronic Components. It offers a capacitance of 2.2 µF with a tolerance of ±10% and a rated voltage of 100V DC. The dielectric is metallized polyester, providing stable capacitance over a wide operating temperature range of -40°C to 85°C.</p><p>&nbsp;</p><p>This capacitor is housed in a radial through hole package with PC pin terminations and a lead spacing of 22.50mm (0.886 inches). Its dimensions are 25.50mm length, 9.50mm width, and 17.50mm height. It is designed for general purpose applications requiring reliable performance in DC circuits.</p><p>&nbsp;</p><p>The component is compliant with RoHS3 and REACH, and has a moisture sensitivity level of 1 (unlimited). No pricing or lead time data is available.</p>

<p>The Panasonic ECQ-E2334KF is a metallized polyester film capacitor with a capacitance of 0.33µF and a tolerance of ±10%.</p><p>&nbsp;</p><p>Rated for a DC voltage of 250V, this capacitor operates over a temperature range of -40°C to 105°C. The component features a radial through-hole package with a lead spacing of 10.00mm and PC pin termination.</p><p>&nbsp;</p><p>Mechanical dimensions: 12.00mm length, 6.50mm width, and 13.00mm height. This general-purpose film capacitor is suitable for coupling, decoupling, and filtering applications in low-frequency circuits.</p>

<p>The DME1W6P8K-F is a metallized polyester film capacitor from Cornell Dubilier's Type DME series. It has a capacitance of 6.8 µF with ±10% tolerance and a rated voltage of 100 VDC. The capacitor features a dissipation factor of 1% maximum at 1 kHz and 25°C, and a minimum insulation resistance of 3000 MΩ·µF or 9000 MΩ. It is designed for general purpose DC applications.</p><p>&nbsp;</p><p>The capacitor is housed in a radial through-hole package with PC pin terminals. Its dimensions are 26.0 mm length, 9.5 mm width, and 20.0 mm height, with a lead spacing of 22.5 mm. It operates over a temperature range of -55°C to +125°C. The dielectric strength is 150% of rated voltage for 1 minute, and the dV/dt rating is 6 V/µs.</p><p>&nbsp;</p><p>The metallized polyester construction provides self-healing properties and compact size. This component is suitable for DC filtering, bypass, coupling, and decoupling applications where stable performance over a wide temperature range is required.</p>

<p>The Panasonic ECQ-V1J224JM is a stacked metallized polyester film capacitor from the ECQV series. It offers a capacitance of 0.22 µF with a tolerance of ±5% and a DC voltage rating of 63 V. The dielectric material is polyester, metallized and stacked, providing excellent electrical characteristics in a non-inductive construction. This capacitor is designed for high density insertion applications and is RoHS compliant.</p><p>&nbsp;</p><p>It operates over a temperature range of -40°C to +105°C, with derating of rated voltage by 2.5% per °C above 85°C. The dissipation factor is limited to a maximum of 1.0% at 20°C, 1 kHz. Insulation resistance is a minimum of 3000 MΩ at 20°C, 50 VDC, 60 seconds for capacitance up to 0.33 µF. The withstand voltage is 150% of rated voltage for 60 seconds.</p><p>&nbsp;</p><p>The capacitor is packaged in a radial leaded case with dimensions of 10.20 mm length, 3.50 mm width, and 10.00 mm seated height. Lead spacing is 7.50 mm. Termination is PC pins. It is suitable for through-hole mounting and general purpose applications, including noise suppression for logic circuits.</p>

<p>The Panasonic ECQ-P1H103GZ3 is a polypropylene film capacitor with a capacitance of 10000pF (0.01µF) and a voltage rating of 50V DC. It features a ±2% tolerance and is designed for high frequency and switching applications. The capacitor uses a polypropylene dielectric, which provides excellent temperature and frequency characteristics, along with long-term stability. It is housed in a radial through-hole package with a lead spacing of 5.00mm, and dimensions of 12.00mm x 5.00mm x 13.50mm. The dissipation factor is 0.1% maximum at 20°C and 1kHz, and insulation resistance is 45000 MΩ minimum for capacitance ≤0.33µF. The operating temperature range is -40°C to +85°C. This component is RoHS3 compliant and REACH unaffected. It is suitable for Dolby circuits, oscillation circuits, and other applications requiring stable film capacitors.</p>

<p>The 158X473 is a metallized polyester film capacitor from the 158X series by Cornell Dubilier Electronics (CDE). It is rated as an X2 class capacitor for EMI and RFI suppression across the AC line. The capacitor offers a capacitance of 0.047µF with a tolerance of ±20% and a rated voltage of 275VAC at 60Hz.</p><p>&nbsp;</p><p>This component features a radial leaded through-hole package with PC pin terminations. The lead spacing is 15.00mm (0.591 inches) and the lead diameter is 0.8mm. The case dimensions are 17.00mm in length, 5.50mm in width, and 12.5mm in height. The operating temperature range is -40°C to 100°C.</p><p>&nbsp;</p><p>The dielectric material is metallized polyester, and the capacitor is designed with a flame retardant case meeting UL94V-0 flammability rating. It holds safety approvals from UL and CSA. The dissipation factor is 0.01 max at 1kHz.</p>

<p>The Panasonic ECW-U1H123JB5 is a surface-mount film chip capacitor from the ECW-U(B) series. It features a capacitance of 0.012 µF with a tolerance of ±5% and a DC voltage rating of 50V. The dielectric material is metallized stacked polyester and polyethylene naphthalate (PEN).</p><p>&nbsp;</p><p>This capacitor offers a maximum dissipation factor of 1.0% at 20°C and 1 kHz, and a minimum insulation resistance of 3000 MΩ at 20°C and 50 VDC for 60 seconds. It can withstand 175% of rated voltage between terminals for 1 to 5 seconds.</p><p>&nbsp;</p><p>Designed for reflow soldering, the component has a maximum soldering temperature of 240°C at the cap surface for up to 30 seconds above 210°C. It is housed in a 1210 (3225 Metric) package with solder pad terminations, measuring 3.20 mm x 2.50 mm x 1.20 mm. The operating temperature range is -55°C to 105°C. This part is suitable for general purpose applications such as coupling and by-pass circuits.</p>

<p>The ECW-U4183V17 is a stacked metallized PEN film capacitor from Panasonic's ECWU series. It offers a capacitance of 0.018 µF with a voltage rating of 400 VDC and a tolerance of ±5%. The capacitor is designed for surface mount assembly in a 2416 (6041 Metric) package with solder pad terminations.</p><p>&nbsp;</p><p>This component features a dissipation factor of ≤1.0% at 20°C and 1 kHz, and a minimum insulation resistance of 3000 MΩ at 20°C and 100 VDC for 60 seconds. The withstand voltage is 600 VDC for 60 seconds. It operates over a temperature range of -55°C to +85°C.</p><p>&nbsp;</p><p>Typical applications include DC link and DC filtering circuits. The capacitor is suitable for reflow soldering with a maximum temperature of 240°C for up to 60 seconds at the capacitor surface.</p>

<p>The DPM2S33K is a metallized polypropylene film capacitor from Cornell Dubilier Electronics (CDE), part of the Type DPM series. It offers a capacitance of 0.033 µF with ±10% tolerance and is rated for 250 VDC (160 VAC). The capacitor uses a metallized polypropylene dielectric, providing low ESR and low ESL for efficient operation in high frequency circuits.</p><p>&nbsp;</p><p>Typical applications include DC link and DC filtering in power supplies, as well as high frequency switching power supply designs. The component is rated for a dV/dt of 34 V/µs and has a maximum dissipation factor of 10% at 1 kHz. Insulation resistance product is 10000 MΩ·µF minimum, and dielectric strength is 175% for 1 minute.</p><p>&nbsp;</p><p>The capacitor is housed in a radial leaded, through-hole package with PC pin terminations. Lead spacing is 10.00 mm, and lead diameter is 0.6 mm. Case dimensions are 13.00 mm length, 7.00 mm width, and 11.00 mm maximum height (per datasheet). Operating temperature range is -55°C to +105°C, with derating above 85°C. The part is RoHS3 compliant (unverified).</p>