Film Capacitors

<p>The Panasonic ECH-U1H104GX9 is a surface mount film capacitor with a capacitance of 0.1 µF and a voltage rating of 50V DC. It features a tight ±2% tolerance and uses a Polyphenylene Sulfide (PPS) metallized-stacked dielectric for stable electrical performance over a wide operating temperature range of -55°C to 125°C. The capacitor is housed in a 1913 (4833 Metric) package with solder pad terminations, measuring 4.80mm in length, 3.30mm in width, and 2.30mm in height. Designed for general purpose applications, this component is RoHS3 compliant (unverified) and carries an MSL of 1 Unlimited (unverified). With no datasheet available due to manufacturer page access denial, all specifications are based on existing database records.</p>

<p>The Würth Elektronik 890334023028CS is a 220nF (0.22µF) X2 safety class film capacitor from the WCAP-FTXX series. It features a metallized polypropylene (MKP) dielectric and is designed for across-the-mains EMI/RFI suppression applications. The capacitor is rated for 310VAC and offers dual DC voltage ratings: 630VDC up to 85°C and 560VDC up to 105°C.</p><p>&nbsp;</p><p>Electrical characteristics include a dissipation factor of 0.1% maximum at 1kHz, insulation resistance of 30GΩ minimum, and a maximum dV/dt of 300V/µs. The component is housed in a radial leaded package with 10.0mm lead spacing and PC pin terminations, measuring 13.0mm x 8.0mm x 14.0mm.</p><p>&nbsp;</p><p>This capacitor is designed for general electronic equipment and is not authorized for safety-critical or life-support applications. It is rated for an operating temperature range of -40°C to +105°C and has a Moisture Sensitivity Level (MSL) of 1, indicating unlimited floor life.</p>

<p>The Panasonic ECW-FE2J155QD is a metallized polypropylene film capacitor with a capacitance of 1.5 μF and a rated DC voltage of 630 V. It features a ±10% tolerance and is housed in a through hole radial package with PC pin termination and a 27.5 mm lead spacing. The capacitor has a dissipation factor of 0.1% at 20°C and 1 kHz, and a minimum insulation resistance of 10000 MΩ·µF at 20°C, 100V DC for 60 seconds. It is designed for applications requiring EMI and RFI suppression, high frequency and switching circuits, as well as high pulse and DV/DT conditions.</p><p>&nbsp;</p><p>The dielectric material is metallized polypropylene (PP) with a flame retardant plastic case, ensuring high safety and low loss characteristics. The operating temperature range is -40°C to +105°C, with derating of rated voltage by 1.0% per °C above 85°C. The capacitor is RoHS3 compliant and has an MSL of 1 (Unlimited).</p><p>&nbsp;</p><p>This capacitor is suitable for active filter circuits and high frequency circuits. The part number suffix D indicates a cut lead form, offering a compact mechanical configuration for PCB mounting.</p>

<p>The Panasonic ECQ-B2333JF is a polyester film capacitor from the ECQ-B series, designed for general purpose applications. It offers a capacitance of 0.033 µF with a ±5% tolerance and a rated voltage of 200V DC.</p><p>&nbsp;</p><p>This capacitor features a non-inductive construction, small size, and excellent electrical characteristics. The dissipation factor is ≤0.8% at 20°C, 1 kHz, and the withstand voltage is 250% of rated voltage for 1-5 seconds.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to +105°C, with derating of 2.5%/°C above 85°C. It is mounted in a radial through-hole package with PC pin terminations and a lead spacing of 7.5 mm.</p><p>&nbsp;</p><p>The capacitor is RoHS compliant and suitable for general purpose applications. The dimensions are 11.00 mm length, 7.00 mm width, and 13.00 mm height.</p>

<p>The B32620A6472K289 is a metallized polypropylene film capacitor (MKP) from TDK Electronics, part of the B32620 series. It features a capacitance of 4700 pF with a voltage rating of 630 VDC and ±10% tolerance. The capacitor uses stacked-film technology with a polypropylene dielectric enclosed in a plastic case (UL 94 V-0) and epoxy resin sealing, providing very high pulse strength and excellent self-healing properties.</p><p>&nbsp;</p><p>Designed for high pulse and high DV/DT applications, this component is well-suited for use in SMPS (switch-mode power supplies) and compact fluorescent lamps. The radial through-hole package with 7.50 mm lead spacing and PC pin terminations allows for reliable soldered connections in PCB assemblies.</p><p>&nbsp;</p><p>The operating temperature range is -55°C to 105°C, with climatic category 55/100/56 per IEC 60068-1. The capacitor is RoHS-compatible and delivered in ammo pack packaging. Its compact dimensions of 10.00 mm x 4.00 mm x 8.50 mm enable space-efficient designs.</p>

<p>The 168223J100A-F is a metallized polyester film capacitor from Cornell Dubilier Electronics (CDE), part of the Type 168/185 series. It offers a capacitance of 0.022 µF with a ±5% tolerance and a rated voltage of 100 VDC. The capacitor is constructed with a non-inductively wound, non-polar design and features tinned copper wire leads.</p><p>&nbsp;</p><p>This component is housed in a rugged rectangular plastic case with a radial box package and 5.0 mm lead spacing. It is designed for through-hole mounting and is suitable for general purpose applications such as bypass, decoupling, energy storage/discharge, and arc suppression. The operating temperature range is -55°C to +125°C, with derating above 85°C.</p><p>&nbsp;</p><p>Key electrical characteristics include a dissipation factor of ≤100 x 10⁻⁴ at 1 kHz, total self-inductance of approximately 7 nH, and a maximum pulse rise time (dv/dt) of 10 V/µs at rated voltage. The dielectric withstand voltage is 1.6 times the rated voltage for 2 seconds. Long-term stability is ±3% after two years under standard conditions.</p>

<p>The DME6S68K is a Type DME radial-leaded, mini-dipped polyester film capacitor from Cornell Dubilier Electronics (CDE). It offers a capacitance of 0.068µF with ±10% tolerance and a DC voltage rating of 630V. The capacitor uses a metallized polyester dielectric and features PC pin terminations with a lead spacing of 15.00mm.</p><p>&nbsp;</p><p>This through-hole device is housed in a radial package measuring 18.50mm length, 6.00mm width, and 11.50mm height. The operating temperature range is -55°C to +125°C. Key electrical characteristics include a dissipation factor of 1% maximum at 25°C and 1kHz, a minimum insulation resistance of 3000 MΩ·µF, and a dielectric strength of 150% of rated voltage for 1 minute.</p><p>&nbsp;</p><p>It is intended for DC applications where miniature size and reliable performance are required. The DME series capacitors deliver performance comparable to physically larger capacitors due to improvements in film technology. The part RoHS3 compliant and REACH unaffected.</p><p>&nbsp;</p><p>The Digi-Key cross-reference part number is DME6S68K-ND. For design guidance, refer to the CDE Application Guide for test conditions.</p>

<p>This is a surface mount film capacitor from Panasonic's ECWU(B) series. It has a capacitance of 0.47 µF with ±5% tolerance and a rated voltage of 16 VDC. The dielectric is a stacked metallized polyester/PEN film.</p><p>&nbsp;</p><p>Electrical characteristics include a dissipation factor of 1.0% maximum at 1 kHz, insulation resistance of 470 MΩ minimum (for this capacitance value), and a withstand voltage of 28 V. The operating temperature range is -55°C to +105°C.</p><p>&nbsp;</p><p>The capacitor is housed in a 2416 (6041 Metric) package with solder pad termination. Dimensions are 6.00 mm x 4.10 mm x 3.00 mm (height). It is designed for reflow soldering with a maximum temperature of 240°C for 30 seconds above 210°C.</p><p>&nbsp;</p><p>Typical applications include coupling, bypass, and general purpose circuits. The component is RoHS and REACH compliant.</p>

<p>The ECW-UC2J273JV is a stacked metallized PEN (Polyethylene Naphthalate) film chip capacitor from Panasonic Electronic Components, part of the ECWU(C) series. It features a capacitance of 0.027 µF with a tolerance of ±5% and a rated DC voltage of 630V. The capacitor is designed for general purpose applications such as coupling and by-pass circuits.</p><p>&nbsp;</p><p>This capacitor utilizes a stacked metallized PEN film dielectric, which provides small size and stable performance. It is suitable for reflow soldering with a maximum temperature of 250°C. The operating temperature range is -55°C to +125°C, including temperature rise on the unit surface.</p><p>&nbsp;</p><p>The component is housed in a 2825 (7163 Metric) surface mount package with solder pad terminations. Dimensions are 7.10 mm length, 6.30 mm width, and 4.10 mm height. The dissipation factor is limited to 1.0% at 20°C and 1 kHz. Insulation resistance is a minimum of 3000 MΩ at 20°C, 100V, 60 seconds for capacitances ≤ 0.33 µF. The withstand voltage is 945V for 60 seconds (150% of rated voltage).</p><p>&nbsp;</p><p>This part is RoHS3 compliant and REACH unaffected.</p>

<p>The KEMET C276CC24400AA0J is a polypropylene film capacitor designed for motor run and motor start applications. It offers a capacitance of 4 µF and a voltage rating of 470VAC, with a tolerance of ±5%. The capacitor uses polypropylene dielectric material, which provides stable performance and low losses.</p><p>&nbsp;</p><p>This capacitor is housed in a radial, can package with a diameter of 25.00mm and a height of 60.00mm. It is designed for chassis or stud mounting, and features quick connect terminals of 0.250" (6.3mm). The lead spacing is 10.00mm. The operating temperature range is -25°C to 85°C, making it suitable for a variety of industrial and commercial environments.</p><p>&nbsp;</p><p>As a motor run capacitor, it is typically used in AC motor circuits to improve efficiency and power factor. The robust construction ensures reliable operation under continuous duty conditions.</p>

<p>The KEMET AFCL060130NJT2T is a small signal feed-through filter from the AFCL 060 series, designed for military, industrial, and medical applications. It is rated for 150 VAC at 400 Hz and 630 VDC, with a rated current of 10 A and a low resistance of 6 mOhms. The filter operates over a temperature range of -55 °C to +125 °C and has a climate category of 55/125/56. It features tag terminals and is supplied in bulk packaging. The component is RoHS compliant and includes a SCIP number for EU regulatory tracking.</p>

<p>This Panasonic ECW-F4204HL is a metallized polypropylene film capacitor rated at 0.2 µF with a ±3% tolerance and a voltage rating of 400V DC. Designed for high frequency and switching applications, it offers stable performance over a wide temperature range of -40°C to 105°C. The capacitor is housed in a radial through-hole package with 12.50mm lead spacing and measures 15.50mm x 8.60mm x 14.80mm. Termination is via PC pins. It is RoHS3 and REACH compliant, with an MSL of 1 (unlimited). Polypropylene film capacitors are known for their low dielectric absorption and high insulation resistance, making them suitable for high-frequency circuits and power electronics applications.</p>