Film Capacitors

<p>The Panasonic ECQ-U2A472MV is a metallized polyester film capacitor designed for X2 class interference suppression across AC lines. It features a capacitance of 4700 pF with ±20% tolerance and a rated voltage of 250V AC. The capacitor is housed in a flame-retardant plastic case with radial leads for through-hole mounting, with a lead spacing of 15.00 mm. It operates over a temperature range of -40°C to +85°C. The dissipation factor is limited to 1.0% maximum at 20°C and 1 kHz, and insulation resistance is at least 15000 MΩ at 20°C and 100 VDC for 60 seconds (applicable when capacitance ≤ 0.33 µF). This capacitor is suitable for across-the-line, antenna coupling, and line bypass applications in EMI/RFI suppression circuits. Its dimensions are 17.50 mm length, 4.00 mm width, and 11.00 mm height.</p>

<p>The KEMET C9TS6MD6105AA0X is a cylindrical aluminum can power film capacitor from the C9T series. It offers a nominal capacitance of 1 µF with a tolerance of -5% +10% and is rated for 440 VAC operation. The dielectric is polypropylene film, and the internal connection is delta, making it suited for three-phase power factor correction applications. The capacitor features screw clamp terminals for secure electrical connections and is designed for chassis mounting with a mounting stud. It operates over a temperature range of -25°C to +70°C and has a life expectancy of 100,000 hours at rated voltage and hot spot temperature. The package is an aluminum can with resin fill, complying with RoHS3 requirements.</p>

<p>The Panasonic ECQ-V1H154JL3 is a stacked metallized polyester film capacitor from the ECQV series. It offers a capacitance of 0.15 µF with a tolerance of ±5% and a rated DC voltage of 50 V. The capacitor features a dissipation factor of ≤1.0% at 20 °C and 1 kHz, and an insulation resistance of ≥3000 MΩ at 20 °C and 50 VDC for 60 seconds. It can withstand 75 VDC for 60 seconds between terminals.</p><p>&nbsp;</p><p>The component is housed in a radial package with crimped leads and a lead spacing of 5.00 mm. Its dimensions are 7.30 mm length, 4.40 mm width, and 6.50 mm height. The operating temperature range is -40 °C to +105 °C, with derating of rated voltage by 2.5 %/°C above 85 °C.</p><p>&nbsp;</p><p>This capacitor is designed for general purpose applications and noise suppression in logic circuits. It is suitable for high-density automatic insertion and is RoHS compliant.</p>

<p>The Panasonic ECW-H10563HV is a metallized polypropylene (PP) film capacitor designed for high frequency and switching applications. It offers a capacitance of 0.056µF with a tight ±3% tolerance and a high voltage rating of 1000V DC (1kV).</p><p>&nbsp;</p><p>The capacitor features a radial through-hole package with PC pin terminations and a lead spacing of 20.00mm. Its mechanical dimensions are 23.00mm length, 9.50mm width, and 19.00mm height. The operating temperature range spans from -40°C to 105°C, making it suitable for a variety of environments.</p><p>&nbsp;</p><p>Polypropylene dielectric provides stable electrical characteristics and low losses, ideal for high-frequency circuits. The metallized construction offers self-healing properties, enhancing reliability in demanding applications.</p>

<p>The ECQ-V1334JM is a stacked metallized polyester film capacitor from Panasonic, part of the ECQV series. It offers a capacitance of 0.33 µF with a tolerance of ±5% and a DC voltage rating of 100 V. The capacitor features a radial through-hole package with PC pin terminations and a lead spacing of 7.50 mm. Its dimensions are 10.20 mm x 4.80 mm x 11.00 mm. The operating temperature range is -40°C to +105°C. Key electrical characteristics include a dissipation factor of ≤1.0% at 20°C, 1 kHz, and an insulation resistance of ≥1000 MΩ at 20°C, 100 VDC, 60 s. The capacitor also withstands 150% of rated voltage for 60 seconds. This film capacitor is suitable for general purpose applications, including noise suppression in logic circuits, as noted in the datasheet. It is RoHS compliant and has a MSL of 1 (unlimited).</p>

<p>The 940C30P15K-F is a Type 940 polypropylene film capacitor from Cornell Dubilier Electronics, designed for high pulse and snubber applications. It features a capacitance of 0.15 µF with ±10% tolerance and a DC voltage rating of 3000 V. The capacitor uses metallized polypropylene dielectric, providing self-healing properties and high peak current capability (dV/dt).</p><p>&nbsp;</p><p>Key electrical characteristics include a low equivalent series resistance (ESR) of 8 mΩ, which supports excellent high-frequency performance. The operating temperature range is -55°C to 105°C, with linear derating above 85°C. The capacitor is housed in an axial through-hole package with tin-plated copper PC pins, measuring 27.00 mm diameter by 46.00 mm length.</p><p>&nbsp;</p><p>This series is optimized for snubber circuits, high-voltage DC-DC converters, and other applications requiring high pulse current and low inductance. The dual metallized electrode construction ensures robust self-healing and reliability under stress. The case is UL510 polyester tape wrap with UL94V-0 epoxy fill, and terminals are tin-plated copper.</p>

<p>This metallized polyester film capacitor from Panasonic Electronic Components is designed for general purpose applications. It offers a capacitance of 0.068 µF with a ±10% tolerance and a voltage rating of 630 VDC. The dielectric material is metallized polyester, providing self-healing properties and reliable performance.</p><p>&nbsp;</p><p>The capacitor operates over a temperature range of -40°C to 105°C and features a radial through-hole package with PC pin terminations. Dimensions are 18.5 mm length, 5.8 mm width, and 12 mm height, with a lead spacing of 15 mm. Suitable for DC filtering, coupling, and bypass circuits where high voltage and moderate capacitance are required.</p>

<p>The Panasonic ECQ-B1H332JF is a polyester film capacitor with a capacitance of 3300 pF and a tolerance of ±5%. It is rated for 50 V DC operation and features a dissipation factor of 0.8% maximum at 20°C and 1 kHz. The insulation resistance is at least 30000 MΩ at 20°C, 50 VDC for 60 seconds. Withstand voltage is 125 V for 1 to 5 seconds between terminals.</p><p>&nbsp;</p><p>This capacitor is constructed with a non-inductive design for excellent electrical characteristics. It operates over a temperature range of -40°C to +105°C, with derating of 2.5% per °C above 85°C. The category temperature range includes the temperature rise on the unit surface.</p><p>&nbsp;</p><p>The component is housed in a radial through-hole package with PC pin termination and a lead spacing of 5.00 mm. Dimensions are 7.00 mm length, 3.00 mm width, and 7.00 mm height. It is designed for high-density insertion applications and is suitable for general purpose use.</p><p>&nbsp;</p><p>Compliance information indicates RoHS3 compliance, REACH unaffected, and MSL 1 unlimited, though these have not been independently verified with certificates. The part is cross-referenced as DigiKey P4557-ND.</p>

<p>This is a 15 µF metallized polypropylene film capacitor rated at 250 VDC with ±10% tolerance. It features a low equivalent series resistance (ESR) of 2.7 mΩ and a dissipation factor of 0.1% maximum at 1 kHz.</p><p>&nbsp;</p><p>Designed for high frequency applications such as DC link, DC filtering, and switching power supplies. It offers a dv/dt rating of 25 V/µs and can handle up to 14 A RMS ripple current at 100 kHz and 70°C.</p><p>&nbsp;</p><p>The capacitor is housed in an axial through-hole package measuring 1.004" diameter by 1.811" length (25.5 mm x 46.0 mm). Terminations are lead-free tinned copper PC pins. Operating temperature range is -40°C to +100°C with voltage derating above 85°C.</p>

<p>The ECW-U1H124JC9 is a film capacitor manufactured by Panasonic Electronic Components. It features a capacitance of 0.12 µF with a tolerance of ±5% and a rated voltage of 50V DC. The capacitor uses a stacked metallized Polyethylene Naphthalate (PEN) film dielectric, which provides small size and reliable performance.</p><p>&nbsp;</p><p>This surface mount capacitor is packaged in a 2416 (6041 Metric) case with solder pad terminations, measuring 6.00mm x 4.10mm x 2.00mm. It is designed for reflow soldering and has an operating temperature range of -55°C to +105°C. The dissipation factor is ≤1.0% at 20°C, 1kHz for capacitance ≤0.33 µF, and insulation resistance is ≥3000 MΩ at 20°C, 50VDC, 60s.</p><p>&nbsp;</p><p>Recommended applications include coupling, bypass, and general purpose circuits. The part is RoHS3 compliant and REACH unaffected, with MSL 1 unlimited. Note: The manufacturer page was not available for verification, but specifications are derived from the datasheet.</p>

<p>The B32594C6225J008 is a metallized polyester film capacitor (MKT) from TDK Electronics, part of the B32594 series. It offers a capacitance of 2.2 µF with a tolerance of ±5% and a DC voltage rating of 400V (200V AC). The capacitor uses a polyethylene terephthalate (PET) dielectric with stacked construction, providing high pulse strength and high contact reliability.</p><p>&nbsp;</p><p>This component is designed for general purpose applications such as blocking, coupling, decoupling, and bypassing. It is suitable for use in compact fluorescent lamps (CFL) and other electronic circuits requiring stable capacitance over a wide temperature range of -55°C to 125°C.</p><p>&nbsp;</p><p>The capacitor is housed in a radial package with straight wire leads (lead-free tinned) and a lead spacing of 27.5mm. The dimensions are 31.5mm length, 13.5mm width, and 22.0mm height. It is RoHS-compatible and has an MSL rating of 1 (unlimited).</p>

<p>The Panasonic ECQ-E2475JF is a metallized polyester film capacitor designed for general-purpose applications. It offers a capacitance of 4.7 µF with a tolerance of ±5% and a DC voltage rating of 250 V.</p><p>&nbsp;</p><p>This capacitor features a radial through-hole package with PC pin terminations and a lead spacing of 22.50 mm. The body dimensions are 26.00 mm in length, 12.00 mm in width, and a seated height of 23.00 mm. It operates over a temperature range of -40°C to 105°C.</p><p>&nbsp;</p><p>The metallized polyester dielectric provides self-healing properties and stable performance over time. This component is suitable for use in power supplies, filtering circuits, and other general-purpose electronic applications where reliable film capacitor performance is required.</p>

<p>The ECQ-E2105JF is a metallized polyester film capacitor from Panasonic Electronic Components. It offers a capacitance of 1 µF with a tolerance of ±5% and a DC voltage rating of 250V. This capacitor is designed for general purpose applications, providing reliable performance in a compact radial package. The through-hole mounting with PC pin terminations and a lead spacing of 15.00mm facilitates easy integration into printed circuit boards. Operating temperature range is -40°C to 105°C, suitable for a wide range of environments. The dimensions are 18.50mm length, 7.40mm width, and 16.00mm height.</p>

<p>The 930C4W1K-F is a Type 930 metallized polypropylene film capacitor from Cornell Dubilier Electronics (CDE). It offers a capacitance of 1 µF with ±10% tolerance and a DC voltage rating of 400 V (250 VAC). The metallized polypropylene dielectric provides self-healing properties and low dissipation factor, making it suitable for general purpose filtering, blocking, bypassing, coupling, and decoupling applications.</p><p>&nbsp;</p><p>Key electrical characteristics include an ESR of 27 mΩ at 20-100 kHz, a dV/dt of 18 V/µs, and a minimum insulation resistance of 200,000 MΩ. The operating temperature range is -55°C to 105°C, with full rated voltage at 85°C and linear derating to 50% at 105°C. The capacitor is UL recognized for construction.</p><p>&nbsp;</p><p>The component is housed in an axial through-hole package with tin-plated copper leads. Body dimensions are 12.3 mm diameter and 31.7 mm length per the datasheet. It is designed for high voltage DC filtering in power supplies and other general purpose applications.</p>

<p>The Panasonic ECQ-P6102JU is a polypropylene film capacitor from the ECQ-P(U) series. It features a nominal capacitance of 1000 pF with ±5% tolerance and a DC voltage rating of 630 V. The capacitor uses a polypropylene dielectric with non-inductive construction and is encapsulated in a flame retardant epoxy resin coating.</p><p>&nbsp;</p><p>Key electrical characteristics include a maximum dissipation factor of 0.1% at 20 °C and 1 kHz, minimum insulation resistance of 45000 MΩ at 20 °C and 100 VDC for 60 seconds, and a withstand voltage of 1575 VDC between terminals for 1 to 5 seconds. The operating temperature range is -40 °C to 105 °C, with voltage derating above 85 °C.</p><p>&nbsp;</p><p>The capacitor is supplied in a radial through-hole package with crimped leads and a lead spacing of 10.00 mm. The body dimensions are 14.50 mm length, 5.00 mm width, and 10.50 mm height. It is suitable for high frequency, switching, and high pulse/dV/dt applications.</p>