Film Capacitors

<p>The KEMET AFCC160250MMW1N is a small signal feed-through film capacitor from the AFCC 160 series. It offers a nominal capacitance of 50 nF with a rated DC voltage of 250 V and a rated current of 16 A at 40°C. The component is designed for through hole mounting with axial terminations.</p><p>&nbsp;</p><p>This capacitor is built to provide consistent high frequency performance while maintaining a compact mechanical enclosure. It is fully encapsulated in a UL-94 V0 polyurethane resin system for enhanced durability. The dielectric design promotes high voltage withstand capability and handling of rapid transients.</p><p>&nbsp;</p><p>Typical applications include industrial DC-power systems, telecommunications equipment, and medical devices where reliable EMI filtering is required. The part is rated for operation at 40°C and belongs to climate category 25/085/21.</p>

<p>The 105PPB102K is a metallized polypropylene film capacitor from Cornell Dubilier Electronics (CDE), designed for high pulse current and high voltage applications such as commutation, snubber, and DV/DT circuits.</p><p>&nbsp;</p><p>Key electrical specifications include a capacitance of 1 µF, a voltage rating of 1000V DC, and a tolerance of ±10%. The capacitor features a self inductance of less than 1 nH per mm of lead spacing and a capacitance drift factor of less than 0.5% after 2 years at 40°C. It is rated for a load life of 2000 hours at 85°C with 125% of rated voltage.</p><p>&nbsp;</p><p>The component is housed in a radial package with a lead spacing of 37.50 mm and measures 42.50 mm in length, 28.00 mm in width, and 37.00 mm in height. It is designed for through-hole mounting with PC pin terminations and operates over a temperature range of -55°C to +105°C. The plastic case and epoxy resin are flame retardant with a UL 94V-0 rating.</p>

<p>This Panasonic ECQ-B1H473JF is a polyester film capacitor with a capacitance of 0.047 µF and a tolerance of ±5%. It is rated for 50 VDC operation and features a radial leaded through-hole package with 5.00 mm lead spacing. The capacitor uses a polyester dielectric and is designed for general purpose applications. It offers excellent electrical characteristics due to non-inductive construction, including a dissipation factor of ≤0.8% at 20°C and 1 kHz, and insulation resistance of ≥30000 MΩ. The operating temperature range is -40°C to 105°C, with derating of 2.5%/°C above 85°C. The withstand voltage is 125 VDC between terminals for 1-5 seconds. This capacitor is RoHS compliant as per the datasheet.</p>

<p>The ECQ-U2A472ML is a metallized polyester film capacitor from Panasonic, designed for EMI and RFI suppression applications. It offers a capacitance of 4700 pF with a tolerance of ±20% and a voltage rating of 275VAC. The X2 safety classification makes it suitable for across-the-line use in AC mains filtering circuits.</p><p>&nbsp;</p><p>This capacitor features a radial, through-hole package with dimensions of 15.00mm x 5.00mm x 12.00mm and a lead spacing of 12.50mm. The operating temperature range is -40°C to 100°C, ensuring reliable performance in a variety of environments. The metallized polyester dielectric provides self-healing properties, enhancing long-term reliability.</p><p>&nbsp;</p><p>Applications include power supply noise filtering, motor control circuits, and general-purpose AC line EMI suppression. The part is RoHS compliant and REACH unaffected, meeting current environmental standards.</p>

<p>The KEMET C4AQIBU5125A12J is a metallized polypropylene film capacitor designed for DC link and DC filtering applications in automotive and industrial power electronics. It offers a capacitance of 12.5 µF with a tolerance of ±5% and a rated voltage of 800 VDC. The capacitor features a low equivalent series resistance (ESR) of 5.5 mΩ, enabling efficient high-frequency operation. It is self-healing and has low loss characteristics. The component is housed in a radial box plastic case with PC pin terminations, with a lead spacing of 27.5 mm. It measures 31.5 mm in length, 22.0 mm in width, and 37.2 mm in height. The operating temperature range is -40°C to 105°C. This capacitor is AEC-Q200 qualified, making it suitable for automotive environments. Typical applications include DC link circuits in inverters, motor drives, and power supplies.</p>

<p>The Panasonic ECQ-V1H563JL is a stacked metallized polyester film capacitor from the ECQV series, designed for high-density insertion applications. It offers a capacitance of 0.056µF with a ±5% tolerance and a rated voltage of 50VDC. The capacitor features a non-inductive construction for excellent electrical characteristics and is housed in a compact radial package with a 5.00mm lead spacing.</p><p>&nbsp;</p><p>This component is suitable for general-purpose applications including noise suppression in logic circuits. It operates over a temperature range of -40°C to +105°C, with voltage derating of 2.5%/°C above 85°C. The dissipation factor is ≤1.0% at 20°C and 1kHz, and insulation resistance is ≥3000 MΩ at 20°C and 50VDC for 60 seconds.</p><p>&nbsp;</p><p>The capacitor is RoHS compliant and has a Moisture Sensitivity Level of 1 (unlimited). It is terminated with PC pins for through-hole mounting, making it suitable for automatic insertion processes.</p>

<p>This is a stacked metallized polyester film capacitor from Panasonic, part number ECQ-V1H334JL. It has a capacitance of 0.33 µF with ±5% tolerance and a rated DC voltage of 50 V. The dielectric is polyester, metallized and stacked, providing non-inductive construction for excellent electrical characteristics.</p><p>&nbsp;</p><p>The capacitor is designed for general purpose applications and noise suppression in logic circuits. It is suitable for high density insertion applications. The dissipation factor is 1.0% maximum at 20°C and 1 kHz. Insulation resistance is at least 1000 MΩ for capacitance values above 0.33 µF (measured at 20°C, 100 VDC, 60 seconds). The withstand voltage is 150% of rated voltage for 60 seconds between terminals.</p><p>&nbsp;</p><p>The component is packaged in a radial leaded through-hole package with a lead spacing of 5.00 mm. Dimensions are 7.30 mm length, 5.20 mm width, and 8.00 mm height. Operating temperature range is -40°C to 105°C. The part is supplied in bulk packaging with 100 pieces per bag. It is RoHS3 compliant.</p><p>&nbsp;</p><p>Note: The rated voltage should be derated by 2.5% per degree Celsius when operating above 85°C.</p>

<p>The Panasonic ECQ-E2683KS is a metallized polyester film capacitor with a capacitance of 0.068 µF and a tolerance of ±10%. It is rated for 250V DC operation, making it suitable for general-purpose applications in DC circuits. The capacitor features a radial leaded package with a lead spacing of 10.00 mm and PC pin termination, allowing for easy through-hole mounting on printed circuit boards.</p><p>&nbsp;</p><p>The dielectric material is polyester, metallized for self-healing properties. The operating temperature range is -40°C to +85°C, suitable for a wide range of environments. The component dimensions are 12.50 mm length, 5.00 mm width, and 9.00 mm seated height.</p><p>&nbsp;</p><p>This capacitor is RoHS3 compliant and REACH unaffected, with an MSL of 1, indicating unlimited floor life. Typical applications include general-purpose filtering, coupling, decoupling, and bypassing in electronic circuits. The ECQ-E series is known for its reliability and stable performance.</p>

<p>The Panasonic ECQ-B1H154JF is a polyester film capacitor with a capacitance of 0.15 µF and a tolerance of ±5%. It is rated for 50 VDC operation and has an operating temperature range of -40°C to +105°C.</p><p>&nbsp;</p><p>The capacitor comes in a radial through-hole package with PC pin terminations and a lead spacing of 7.5 mm. Its dimensions are 11.00 mm x 5.00 mm x 11.00 mm, making it suitable for high-density insertion applications.</p><p>&nbsp;</p><p>Key electrical characteristics include a maximum dissipation factor of 0.8% at 20°C and 1 kHz, and a minimum insulation resistance of 30000 MΩ. It is compliant with the RoHS directive and is designed for general purpose use.</p>

<p>The Panasonic ECQ-E1334KF is a metallized polyester film capacitor designed for general purpose applications. It offers a capacitance of 0.33 µF with a tolerance of ±10% and a voltage rating of 100V DC.</p><p>&nbsp;</p><p>This capacitor features a radial through-hole package with a lead spacing of 7.50 mm. The dimensions are 10.30 mm in length, 6.00 mm in width, and 11.70 mm in height. Termination is via PC pins.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 105°C, making it suitable for a wide range of environments. The metallized polyester dielectric provides self-healing properties and stable performance over time.</p>

<p>The Panasonic ECQ-E2104KF is a metallized polyester film capacitor designed for general purpose applications. It offers a capacitance of 0.1 µF with a tolerance of ±10% and a DC voltage rating of 250V. The capacitor uses a metallized polyester dielectric, providing stable performance across a wide range of conditions.</p><p>&nbsp;</p><p>This through-hole component features a radial package with PC pin terminations. The lead spacing is 7.50mm (0.295 inches), and the overall dimensions are 10.30mm length, 5.80mm width, and 9.40mm height. The operating temperature range is -40°C to 105°C, making it suitable for many industrial and consumer environments.</p><p>&nbsp;</p><p>The compact radial form factor allows for easy insertion on printed circuit boards. The metallized polyester construction offers self-healing properties and good capacitance stability over temperature and frequency. This capacitor is commonly used for coupling, decoupling, bypass, and snubber circuits in low to moderate voltage DC applications.</p>

<p>The KEMET C4GADUC4500AA0J is a metallized polypropylene film capacitor designed for high frequency and switching applications. It offers a capacitance of 5 µF with a voltage rating of 250 VDC and a tolerance of ±5%. The equivalent series resistance (ESR) is 5.4 mΩ, contributing to low losses in high-frequency circuits.</p><p>&nbsp;</p><p>The capacitor utilizes a polypropylene dielectric with metallized electrodes, providing stable performance over an operating temperature range of -40°C to 85°C. The axial package with PC pin termination allows for through-hole mounting, and the dimensions are 0.669 inches diameter by 1.299 inches length (17.00 mm x 33.00 mm).</p><p>&nbsp;</p><p>This component is suitable for applications that require low ESR and high frequency handling, such as switching power supplies, DC link circuits, and snubber circuits. The polypropylene dielectric ensures good capacitance stability and low dissipation factor at higher frequencies.</p>