Amphenol Sine Systems

<p>The Amphenol Sine Systems AHDP06-24-21SR-SRA is a 21-position circular connector plug housing from the DuraMate AHDP series. It features a thermoplastic black housing with a bayonet lock fastening system and a keyed orientation for secure mating. The housing is designed for free hanging (in-line) mounting and accepts size 12 (4 positions) and size 16 (17 positions) socket contacts with crimp termination. Wire ranges are 10-14 AWG for size 12 contacts and 14-20 AWG for size 16 contacts. The connector is rated for 250V and carries 25A per size 12 contact and 13A per size 16 contact. It offers IP67 and IP69K ingress protection when mated, and operates from -55°C to +125°C. The seal is made of silicone rubber with a reduced diameter design. The part includes a coupling nut and a smooth ring adapter (SRA).</p>

<p>The AT14-001-2486 is a lockwasher accessory designed for use with Amphenol Sine Systems AHDP series size 24 receptacles. It is constructed from 0.52 mm thick steel with a nickel plated finish, providing corrosion resistance and reliable mechanical retention.</p><p>&nbsp;</p><p>This lockwasher is intended to secure the receptacle in place, preventing loosening due to vibration or thermal cycling. The nickel plating offers a silver appearance and enhances durability in demanding environments.</p><p>&nbsp;</p><p>As a mechanical accessory, it does not carry electrical current but is essential for maintaining the integrity of circular connector assemblies. It is RoHS compliant and suitable for use in automotive, industrial, and other harsh environment applications.</p>

<p>The Amphenol Sine Systems AHDPBS-010-2405 is a size 24 backshell designed for use with the AHDP series of circular connectors. It is constructed from black thermoplastic material and offers an IP67 rating for dust tight and waterproof protection. The backshell features a 180° cable exit and is designed for use with corrugated tube sizes NW 17, 19, and 26. It is unshielded and utilizes a snap-on attachment mechanism. This backshell is RoHS compliant.</p>

<p>The Amphenol Sine Systems AHDPBS-011-2405 is a backshell and cover designed for use with AHDP series circular connectors. This component provides a 90° cable exit angle, facilitating right-angle cable routing in tight spaces. It is manufactured from black thermoplastic, offering light weight and durability.</p><p>&nbsp;</p><p>This backshell accommodates corrugated tube nominal widths of NW 17, 19, and 26. It features a snap-on attachment mechanism for secure fitting to the connector. The unshielded design is suitable for applications where electromagnetic shielding is not required.</p><p>&nbsp;</p><p>The AHDPBS-011-2405 carries an IP67 ingress protection rating, making it dust tight and waterproof for use in harsh environments. It is RoHS compliant for environmental regulatory adherence. All dimensions are for reference only per the manufacturer drawing.</p>

<p>The ACJC6H BULK is a phone jack connector designed for audio applications. It is a dual female stereo jack with a 6.35mm (1/4") mating diameter, supporting 3 conductors (TRS) and 7 contacts. The connector does not contain any internal switches. It is unshielded and features a board guide for alignment. The mounting type is panel mount, through hole, right angle, with kinked pin solder termination. The operating temperature range is -25°C to 70°C. This connector is suitable for audio equipment, studio gear, and musical instruments. It is packaged in bulk.</p>

<p>The Amphenol Sine Systems AT62-201-16141 is a machined socket contact designed for use with 16-20 AWG wire. It features a copper alloy base material with a nickel plating finish, providing reliable conductivity and corrosion resistance. The contact is size 16 and uses a crimp termination method, making it suitable for field-installable connections.</p><p>&nbsp;</p><p>Electrical specifications include a current rating of 13 A and a maximum contact millivolt drop of 60 mV when tested at 13 A. The recommended wire range is 16-20 AWG, and the available hand crimper is model CA-5D12. This contact is RoHS compliant.</p><p>&nbsp;</p><p>This socket contact is part of the AT and AHD-9 series from Amphenol Sine Systems, designed for multi-purpose interconnect applications. Its machined construction ensures consistent performance and durability in demanding environments.</p>

<p>The Amphenol Sine Systems AHDP04-24-21PR-SRA is a 21-position circular connector receptacle housing from the Duramate AHDP series. It features a thermoplastic shell in black with a silicone rubber seal, providing IP67 and IP69K ingress protection when mated. The housing is designed for panel mounting with a bulkhead front side nut and uses a bayonet lock fastening system for secure mating.</p><p>&nbsp;</p><p>This receptacle housing accommodates size 12 (4 positions) and size 16 (17 positions) crimp contacts, supporting wire ranges of 10-14 AWG and 14-20 AWG respectively. It is rated for operating temperatures from -55°C to +125°C and offers a dielectric withstanding voltage of 1500 VAC with less than 2 mA leakage. Insulation resistance is a minimum of 1000 MOhm at 25°C.</p><p>&nbsp;</p><p>The housing is unshielded and keyed for orientation. It is designed for 100 mating cycles and is RoHS compliant. The mating part is the AHDP06-24-21S* female housing.</p>

<p>The AT60-16-0622 is a stamped pin contact from Amphenol Sine Systems, part of the A Series. It is designed for use with 16-20 AWG wires and features a crimp termination style. The contact is made of copper alloy with a nickel plating, providing good conductivity and corrosion resistance. It has a contact size of 16 and is rated for a current of 13 A with a maximum millivolt drop of 100 mV at 13 A test current. The recommended insulation diameter is 1.40 to 2.54 mm. This contact is supplied in tape and reel packaging with 4000 pieces per reel. It is RoHS compliant. The contact is suitable for use in various connector applications requiring reliable signal or power connections.</p>

<p>The AHDP24-PN01 is a hex nut accessory from Amphenol Sine Systems, designed for use with AHDP series size 24 receptacles. It is manufactured from black thermoplastic material, providing a durable and lightweight fastening solution.</p><p>&nbsp;</p><p>The nut features a 1 11/16-18 UNEF thread and has a nominal body diameter of 47.7 mm with a height of 6.4 mm. The specified mounting torque range is 7.4 to 8.4 N.m to ensure proper installation.</p><p>&nbsp;</p><p>This component is RoHS compliant, supporting environmental and safety standards. It is suitable for various applications requiring a reliable circular connector accessory.</p>

<p>The AW2S is a 2-position wedge lock designed for use with Amphenol Sine Systems AT Series socket connectors. This accessory provides secure wire retention within the connector housing. It is manufactured from green thermoplastic and is RoHS compliant.</p><p>&nbsp;</p><p>The wedge lock features 2 cavities and is not keyed, allowing universal orientation. Reference dimensions are 19.3 mm length, 14.9 mm width, 11.6 mm height, and 1.3 mm thickness. All dimensions are for reference only per the manufacturer.</p><p>&nbsp;</p><p>This component is intended for use with AT06-2S* series connectors. No operating temperature range or flammability rating is specified in available documentation.</p>

<p>The AT04-12PA-PM01 is a rectangular connector housing from Amphenol Sine Systems, part of the AT Series. It is a 12-position receptacle housing, configured with 2 rows, designed for panel mount applications. The housing features a latch holder fastening mechanism to ensure secure mating with compatible plug connectors. Its sealed design provides protection against moisture and dust, making it suitable for use in harsh environments. The operating temperature range spans from -55°C to 125°C, accommodating extreme conditions. The housing is gray and accepts crimp contacts (not included) for wire sizes 14-20 AWG. The contacts used are male pins (sold separately). This housing is RoHS3 compliant and REACH unaffected (unverified). The part is commonly used in automotive, industrial, and marine applications where reliable, sealed connections are required.</p>

<p>The Amphenol Sine Systems AHDP06-24-31SR-WTA is a circular connector plug housing designed for use with size 16 female socket contacts. This housing accommodates 31 positions (Radsok) and is part of the A Series family, compatible with AT, ATV, AHD-9, ARC, DuraMate, and PanelMate series.</p><p>&nbsp;</p><p>The housing is constructed from black thermoplastic and features a bayonet lock fastening system for secure mating. It is designed for free hanging (in-line) mounting and is keyed for proper orientation. The shell size is 24-31, and the housing includes a coupling nut.</p><p>&nbsp;</p><p>This plug housing provides IP67 and IP69K ingress protection, making it suitable for demanding environments where dust tightness and water resistance are required. Contacts are terminated via crimp and are ordered separately.</p>

<p>The Amphenol Sine Systems AT06-4S is a 4-position rectangular plug housing from the AT series. It is designed for free hanging (in-line) mounting and uses crimp termination with female socket contacts. The housing is made of gray thermoplastic and includes a silicone rubber seal, providing IP68 (1m, 24h) and IP69K protection when mated.</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 13 A, dielectric withstanding voltage of 1500 V AC with less than 2 mA leakage, and minimum insulation resistance of 1000 MΩ at 25°C. The operating temperature range is -55°C to +125°C. The connector accepts 14-20 AWG wire and uses contact size 16.</p><p>&nbsp;</p><p>The housing features a latch lock fastening system and is rated for 100 mating cycles. It is RoHS3 compliant. The mating part is the AT04-4P* receptacle series.</p>

<p>The AWM-12P is a 12-position wedge lock accessory designed for use with Amphenol Sine Systems ATM series connectors. It is used to secure pins within the connector housing.</p><p>&nbsp;</p><p>This wedge lock is made of orange thermoplastic and features 12 cavities. It is not keyed and is compatible with the ATM04-12P connector housing.</p><p>&nbsp;</p><p>The AWM-12P is RoHS compliant and REACH unaffected. Moisture sensitivity level is rated as 1 (unlimited), though this is unverified.</p>

<p>The Amphenol Sine Systems ATM04-2P is a 2-position rectangular connector housing designed for the ATM series. It is a receptacle type housing with male pin contacts and uses a latch holder for secure mating. The housing is free hanging (in-line) mount and terminates via crimp contacts.</p><p>&nbsp;</p><p>This housing is rated for a current of 7.5 A per contact (contact size 20, wire range 16-22 AWG) and features a dielectric withstanding voltage of 1500 VAC with less than 2 mA leakage, and a minimum insulation resistance of 1000 MΩ at 25°C. It operates over a temperature range of -55°C to +125°C and is sealed to IP68 when mated (1 meter of water for 24 hours). The housing is molded in gray thermoplastic with a silicone rubber seal, and a contact retention wedge (AWM-2P) is required.</p><p>&nbsp;</p><p>The ATM04-2P is intended for use with mating plug ATM06-2S* (where * denotes modifications and colors). It supports 100 mating cycles.</p>

<p>The ATM06-3S is a 3-position plug housing from the ATM Series by Amphenol Sine Systems. It is a free hanging (in-line) rectangular connector housing designed for use with female socket contacts. The housing is gray thermoplastic with silicone rubber seals, providing IP68 ingress protection when mated.</p><p>&nbsp;</p><p>It supports 16-22 AWG wire and is rated for 7.5 A per contact. Operating temperature range is -55°C to +125°C. The housing features a latch lock fastening system and has a mating cycle durability of 100 cycles. Insulation resistance is 1000 MΩ minimum at 25°C.</p><p>&nbsp;</p><p>This connector is commonly used in automotive, industrial, and harsh environment applications where a sealed connection is required. The crimp termination allows for reliable wire connections. The mating part is the ATM04-3P receptacle.</p>

<p>The Amphenol Sine Systems AHDP04-24-31PR-SRA is a 31-position male pin receptacle housing from the DuraMate AHDP series. This housing is designed for panel mount applications using a bulkhead front side nut and features a bayonet locking mechanism for secure mating.</p><p>&nbsp;</p><p>The housing is constructed from a black thermoplastic shell with silicone rubber seals, providing IP67 and IP69K ingress protection when mated. It operates over a temperature range of -55°C to +125°C. The receptacle is supplied with a dust cap and includes a smooth ring adapter (SRA) and a reduced diameter wire seal.</p><p>&nbsp;</p><p>Electrical specifications include a dielectric withstanding voltage of 1500 VAC with less than 2 mA leakage, a minimum insulation resistance of 1000 MΩ at 25°C, and a current rating of 13 A for size 16 contacts with 14-20 AWG wire. The mating part is the AHDP06-24-31S* series (seal type varies).</p>

<p>The Amphenol Sine Systems AT06-12SA-RD01 is a 12-position plug housing from the AT Series, designed for use with female socket contacts (14-20 AWG wire) and crimp termination. The housing is free hanging (in-line) with a latch lock fastening system, making it suitable for quick and reliable connections in sealed environments.</p><p>&nbsp;</p><p>Key specifications include a current rating of 13 A, operating temperature range from -55°C to +125°C, dielectric withstanding voltage of 1500 V AC, and insulation resistance of 1000 MΩ minimum at 25°C. The connector is IP67 rated when mated and RoHS3 compliant.</p><p>&nbsp;</p><p>The housing is made of thermoplastic with silicone rubber seals, supporting up to 100 mating cycles and accepting wire sizes from 14 to 20 AWG. The mating part is the AT04-12PX* receptacle series.</p>

<p>The AT04-4P-BM04 is a 4-position, 2-row shrouded receptacle header from Amphenol Sine Systems, part of the A Series. It features male pins with circular copper alloy contacts finished in nickel. The housing is black thermoplastic with a 4-wall shrouded design and a latch holder fastening system. Mounting is through hole with solder termination. The connector is rated for 13A continuous current and has a dielectric withstanding voltage of 1500V AC with less than 2mA leakage. Insulation resistance is 1000 MΩ minimum at 25°C. It operates over a temperature range of -55°C to +125°C and achieves IP67 protection when mated. Mating cycle durability is rated at 100 cycles. The design includes board lock and potting wall features, though this variant (AT04-4P-BM04) has no potting reservoir. The mating plug is the AT06-4S* series. This connector is intended for board-to-cable/wire applications in harsh environments.</p>

<p>The AT04-4P-RD01 is a rectangular connector housing from Amphenol Sine Systems' AT series. It is a 4-position receptacle with 2 rows of male pin contacts, designed for free hanging (in-line) mounting and crimp termination. The housing is made of gray thermoplastic with a silicone rubber seal, providing ingress protection ratings of IP68 (1m water for 24 hours when mated) and IP69K (high-pressure washdown when mated).</p><p>&nbsp;</p><p>Key electrical specifications include a current rating of 13 A per contact and an operating temperature range of -55°C to +125°C. The housing supports 14-20 AWG wires and uses contact size 16. It features a latch holder fastening type for secure mating with the AT06-4S* plug series. The insulation resistance is a minimum of 1000 MΩ at 25°C, and the dielectric withstanding voltage is 1500 V AC with leakage less than 2 mA.</p><p>&nbsp;</p><p>This connector housing is suitable for applications requiring reliable and sealed connections in harsh environments. The 100 mating cycle durability ensures long-term performance. The housing is RoHS compliant.</p>

<p>The Amphenol Sine Systems AT04-08PB-BM04 is an 8 position board-to-cable/wire receptacle from the A Series. It features a through hole solder termination and a shrouded 4-wall design with latch holder fastening for secure mating.</p><p>&nbsp;</p><p>This connector is rated for 13A current and can operate over a temperature range of -55°C to +125°C. It provides IP67 protection when mated and includes a board lock and potting wall for robust mounting and sealing. The housing is made of black thermoplastic and the contacts are copper alloy with a nickel finish.</p><p>&nbsp;</p><p>The dielectric withstand voltage is 1500 VAC with less than 2 mA leakage, and minimum insulation resistance is 1000 MΩ at 25°C. It is rated for at least 100 mating cycles.</p>

<p>The Amphenol Sine Systems AT06-2S is a 2-position rectangular plug housing from the AT series. It is designed for free hanging (in-line) mounting and accepts female socket contacts with crimp termination for wire sizes 14-20 AWG (contact size 16). The housing is molded in gray thermoplastic with silicone rubber seals, providing IP68 (1m water, 24h, mated) and IP69K (mated) environmental protection.</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 13 A, dielectric withstanding voltage of 1500 VAC (max leakage &lt;2 mA), and minimum insulation resistance of 1000 MΩ at 25°C. The operating temperature range is -55°C to +125°C. The latch lock fastening ensures secure mating with the corresponding AT04-2P* receptacle.</p><p>&nbsp;</p><p>This plug housing is suitable for harsh environment applications requiring sealed connections. The crimp termination allows for field-installable wiring. The part is RoHS3 compliant.</p>

<p>The AW3P-1939 is a wedge lock accessory from Amphenol Sine Systems, designed for use with AT series 3-position connectors. It is made of blue thermoplastic and features a 1939 key code to ensure proper alignment and polarization. The wedge lock secures the connector pins in place, preventing accidental disconnection. RoHS compliant, this component is suitable for automotive and industrial applications where reliable connector locking is required. The part is designed for use with connectors such as the AT04-3P series. All dimensions are for reference only as per the manufacturer's drawing.</p>

<p>The ATM04-08PA is an 8 position receptacle housing from the ATM series by Amphenol Sine Systems. It is designed for use with male pin contacts and utilizes crimp termination. The housing is free hanging (in-line) and features a latch holder fastening type for secure mating.</p><p>&nbsp;</p><p>This housing is rated for a current of 7.5 A and an operating temperature range of -55°C to 125°C. It has a dielectric withstanding voltage of 1500 VAC and a minimum insulation resistance of 1000 MΩ at 25°C. The housing is sealed to IP67 when mated, providing protection against dust and water ingress.</p><p>&nbsp;</p><p>Constructed from thermoplastic housing material with silicone rubber seals, the ATM04-08PA is suitable for demanding environments. It has a mating cycle durability of 100 cycles and accepts 20 AWG contacts. The housing includes 3 keyway places for alignment.</p><p>&nbsp;</p><p>This component is RoHS compliant and is commonly used in automotive, industrial, and other applications requiring a reliable, sealed rectangular connector interface.</p>

<p>The AWM-8P is a wedge lock accessory designed for use with Amphenol Sine Systems ATM series connectors. It provides secure pin retention with 8 positions, ensuring reliable connections in demanding environments. The wedge lock is made of orange thermoplastic for easy identification and is RoHS compliant. It is compatible with ATM04-08P* connectors and features a non-keyed design for universal application. The orange color aids in visual wire management and assembly verification.</p>