TE Connectivity

<p>The 5552744-1 is a 64-position, 2-row Centronics receptacle featuring outer shroud contacts. It offers a right angle solder termination for through-hole PCB mounting and includes tapped threaded flanges (4-40) to enable secure panel mount attachment. Contact finish is gold with 30µin thickness (0.76µm) ensuring reliable signal transmission. The connector is wave solder capable to 265°C, supporting standard high-temperature assembly processes.</p><p>&nbsp;</p><p>Compliance has been verified from TE Connectivity's statement: RoHS Compliant (2011/65/EU), ELV Compliant, REACH SVHC Free, and China RoHS compliant. Note that this component is not low halogen (contains Br or Cl &gt; 900 ppm). The part is rated MSL 1 (unlimited floor life) according to available data.</p><p>&nbsp;</p><p>Designed for dense parallel interface applications, the 5552744-1 fits within the Centronics connector category commonly used in computer peripheral and office equipment interconnects. The right angle profile saves board space when mounting near edge of PCB.</p>

<p>The TE Connectivity 87179-1 is a polarizing device used as a keying plug for 0.025" (0.64mm) square post contacts in AMP MODU rectangular connector systems. This accessory ensures correct mating orientation and prevents mismating of connector pairs.</p><p>&nbsp;</p><p>Designed for use with AMP MODU square post contacts, the 87179-1 provides reliable polarization in connector assemblies. It is classified as a rectangular connector accessory and is suitable for applications requiring secure and accurate connector alignment.</p><p>&nbsp;</p><p>The part is declared RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited floor life). It is manufactured by TE Connectivity, a leading supplier of connectivity and sensor solutions.</p>

<p>The TE Connectivity 925712-1 is a stamped socket contact designed for rectangular connector systems. It accommodates wire gauges from 10 to 14 AWG and uses a crimp termination method for secure wire attachment. The contact features a tin finish, providing good solderability and corrosion resistance.</p><p>&nbsp;</p><p>This contact is suitable for power and signal applications within rectangular connector housings. Its stamped construction offers a cost-effective solution for high-volume production. The crimp termination ensures reliable mechanical and electrical connections when used with appropriate crimping tools.</p><p>&nbsp;</p><p>Designed for use in industrial, automotive, and general-purpose interconnect systems, the 925712-1 socket contact is RoHS3 compliant and REACH unaffected. It has an MSL rating of 1 (unlimited), indicating no moisture sensitivity restrictions for storage and handling.</p>

<p>The TE Connectivity 350591-1 is a keying plug designed as a polarizing device for the MR (Miniature Rectangular) series of connectors. This accessory ensures correct mating alignment and prevents mismating of connector pairs in multi-position applications.</p><p>&nbsp;</p><p>This keying plug is compliant with EU RoHS Directive 2011/65/EU, EU ELV Directive 2000/53/EC, and China RoHS 2. It does not contain REACH SVHC and is low halogen with Br, Cl, F, I below 900 ppm per homogenous material, and is BFR/CFR/PVC free.</p><p>&nbsp;</p><p>As a mechanical accessory, it is not applicable for solder process capability. The part is identified by TE part number 350591-1 and is also listed under DigiKey part number A14195-ND.</p>

<p>The TE Connectivity 1-215570-2 is a Micro-MaTch series paddle board connector designed for direct wire-to-board termination. This DIP header features 12 positions arranged in 2 rows with a standard 2.54 mm pitch, and accepts 28 AWG stranded or solid wire via insulation displacement contacts (IDC). The connector uses a feed-through design, allowing daisy-chaining in ribbon cable applications.</p><p>&nbsp;</p><p>The housing is molded from red glass-filled polyester (G.F. Polyester), which provides mechanical strength and electrical insulation. Contacts are made of phosphor bronze with a tin over nickel plating for reliable conductivity and corrosion resistance. The row spacing matches 0.100 inches (2.54 mm), and the cable pitch is 0.050 inches (1.27 mm), consistent with standard IDC ribbon cable.</p><p>&nbsp;</p><p>Mounting is achieved through a through hole, press-fit interface. The connector is available in both box packaging (250 pieces) and tape and reel (2500 pieces) for automated assembly. This component is suitable for board-in applications where a compact, reliable connection to flat ribbon cable is required.</p>

<p>The TE Connectivity 205089-2 is a signal machined crimp pin contact designed for reliable wire connections. It accepts 20-24 AWG wire and features a gold finish over a copper alloy contact material, ensuring good conductivity and corrosion resistance. The crimp termination provides a secure mechanical and electrical bond.</p><p>&nbsp;</p><p>This contact is part of TE's multi-purpose connector family, suitable for a variety of signal and power applications. The machined construction offers consistent performance and durability. While specific current and voltage ratings are not provided, the gold finish is ideal for low-level signal applications where oxidation resistance is critical.</p><p>&nbsp;</p><p>The 205089-2 is RoHS3 compliant, meeting environmental standards. It is commonly used in wire-to-board and wire-to-wire connector systems, particularly in industrial, automotive, and consumer electronics.</p>

<p>The TE Connectivity 2-320569-3 is a circular ring terminal designed for reliable wire termination in electrical systems. It accepts 10-12 AWG wire and fits a 1/4 stud, making it suitable for a variety of power and signal connections.</p><p>&nbsp;</p><p>The terminal is insulated for electrical safety and uses a crimp termination method for secure attachment. The contact is made of tin-plated copper, providing good conductivity and corrosion resistance. A serrated termination feature enhances grip on the wire.</p><p>&nbsp;</p><p>This free-hanging (in-line) ring connector measures 33.58 mm in length, 13.49 mm in width, and 1.02 mm in thickness. Its yellow color indicates the wire gauge range per industry convention.</p>

<p>The TE Connectivity MTA-100 series header 640454-6 is a 6-position, single-row, partially shrouded PCB mount header designed for wire-to-board connectivity. It features a 2.54mm (0.100 inch) pitch and a vertical PCB mount orientation, making it suitable for compact board designs.</p><p>&nbsp;</p><p>This header uses tin-plated copper alloy square pins with a mating area plating thickness of 3.81 µm over a nickel underplating. It is rated for 5A maximum contact current with a voltage rating of 250VAC. The operating temperature range spans -55°C to +105°C.</p><p>&nbsp;</p><p>The insulator is molded from UL94 V-0 rated thermoplastic material in a natural color. The components are delivered in through-hole solder termination format. This part is RoHS and REACH compliant (unverified).</p>

<p>The TE Connectivity 5-146285-2 is a 2-position single row unshrouded header from the AMPMODU MOD II series. It features a 2.54mm (0.100") pitch and square male pin contacts made of copper alloy with a 30.0µin (0.76µm) tin finish. The overall contact length is 0.410" (10.41mm) with a contact length of 5.84mm (0.230"). The header uses a push-pull fastening type and is designed for board-to-board or cable applications.</p><p>&nbsp;</p><p>This through hole header is housed in a black liquid crystal polymer (LCP) insulator with an insulation height of 2.29mm (0.090"). It is rated for 3A current and operates over a temperature range of -65°C to 105°C. The material flammability rating is UL94 V-0. It is pin-in-paste capable to 260°C, supporting lead-free soldering processes.</p>

<p>The TE Connectivity 1055687-1 is a coaxial connector (RF) assembly, specifically an OSMT receptacle with a male pin contact. It is designed for 50 Ohm impedance and supports frequencies up to 6 GHz. The connector is a single-port device with a snap-on fastening type for secure mating. This connector is surface mountable with solder termination for both the center contact and shield. The center contact is made of copper alloy. It is compliant with RoHS3 and REACH unaffected, with an MSL level of 1 (unlimited). This part is commonly used in RF applications requiring a compact, low-profile interconnect. The surface mount package allows for automated assembly, making it suitable for high-volume production. The 6 GHz frequency range makes it appropriate for various wireless communication systems, test equipment, and other RF modules. This connector is part of TE Connectivity's OSMT series, offering a reliable solution for RF signal transmission. The gold-plated copper alloy center contact ensures good conductivity and corrosion resistance. The surface mount design with microstrip contact termination is ideal for PCB integration. The snap-on mating mechanism provides quick and secure connections while maintaining consistent electrical performance.</p>

<p>The TE Connectivity 174051-2 is a rectangular connector header designed for board-to-cable/wire applications. It features 12 positions arranged in 2 rows with a 2.5mm pitch and 5.2mm row spacing. The contacts are rectangular tabs made of brass with a tin finish, and the header is shrouded with a 4-wall design for robust mating.</p><p>&nbsp;</p><p>This header is mounted through a right-angle orientation and soldered to the PCB. The insulation is made of polybutylene terephthalate (PBT) in black, with an insulation height of 16.71mm. A locking ramp fastening type ensures secure connection, and a mounting flange provides additional mechanical stability.</p><p>&nbsp;</p><p>The contacts have a length of 7.00mm, and the operating temperature range is -30°C to 105°C. The current rating varies depending on the wire gauge used. This connector is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 206512-6 is a backshell with cable clamp designed for circular connectors. It features a 1 3/8-18 UNEF thread for shell connection, shell size 23, and a 180° cable exit. The cable opening is 1.125" (28.58mm) with an outside diameter of 1.600" (40.64mm). Made of thermoplastic material, it is black in color and includes clamp screws for secure cable attachment. This unshielded backshell is part of the CPC series and is RoHS3 compliant. It is suitable for use in various interconnect applications requiring strain relief and cable management.</p>

<p>The TE Connectivity 204370-2 is a machined male pin contact designed for use in D-Sub, D-shaped connector systems. This contact accepts wire gauges from 22 to 28 AWG and features a gold finish over a copper alloy base material, ensuring reliable conductivity and corrosion resistance. The crimp termination method provides a secure mechanical and electrical connection without soldering. As a size 22D contact, it is suitable for standard D-Sub connector layouts. The part is RoHS3 compliant and REACH unaffected, meeting current environmental regulations. This contact is intended for signal-level applications where consistent performance and durability are required.</p>

<p>The TE Connectivity 6-104363-1 is a 12 position single row shrouded header designed for board-to-board or cable applications. The header uses a 2.54mm (0.100") pitch and all 12 positions are loaded with male square pins made of brass with a tin contact finish (15.0µin).</p><p>&nbsp;</p><p>It features a through hole mounting with solder termination and a 4-wall shrouded design with a latch holder for secure mating. The insulation is black thermoplastic rated UL94 V-0, with an insulation height of 13.60mm (0.535") and overall contact length of 0.550" (13.97mm).</p><p>&nbsp;</p><p>Rated at 3A current with an operating temperature range of -65°C to 105°C, this header includes a keying slot for correct orientation. It is suitable for general purpose interconnects in various electronic assemblies.</p>

<p>The TE Connectivity 926474-1 is a 2 position female quick connect housing designed for reliable wire termination. This housing accommodates 0.250" (6.35mm) quick disconnect terminals, providing a secure connection for a variety of applications.</p><p>&nbsp;</p><p>This housing features a free hanging (in-line) mounting style, allowing for flexible placement within an assembly. The natural color housing is a standard offering for many connector systems. The perpendicular stacking direction aids in organized wire routing and space-saving designs.</p><p>&nbsp;</p><p>As a female, receptacle-style housing, it is intended to mate with matching male quick connect terminals. This product is a connector housing only and does not include terminals. Compatible terminals must be purchased separately to complete the connection.</p>

<p>The TE Connectivity 1-2834016-2 is a 2 position wire to board terminal block designed for through hole mounting. It features a 2.54mm (0.100") pitch and a mating orientation that is horizontal with the board.</p><p>&nbsp;</p><p>This terminal block utilizes a screwless leg spring, push-in spring wire termination, accommodating wire gauges from 20 to 26 AWG. It is rated for 6A current and 150V voltage. The housing is green.</p><p>&nbsp;</p><p>Ideal for space-constrained PCB applications requiring a reliable wire to board connection with a low-profile side entry design.</p>

<p>The TE Connectivity 6469048-1 is a high speed header connector designed for daughtercard applications in backplane systems. It features 120 positions arranged in 8 rows with a 2.50mm pitch, providing 80 single signal contacts and 40 ground contacts for signal integrity.</p><p>&nbsp;</p><p>The connector uses a press-fit termination for reliable solderless connections and is mounted at the board edge with a right angle orientation. Gold contact finish with 30.0µin thickness ensures corrosion resistance and reliable mating cycles.</p><p>&nbsp;</p><p>This connector is suitable for high speed data transmission applications where signal integrity and density are critical. The 8-row configuration with dedicated ground contacts helps manage impedance and reduce crosstalk.</p>

<p>The TE Connectivity 1658621-4 is a 20-position rectangular connector receptacle designed for IDC (Insulation Displacement Connection) termination to 26-28 AWG ribbon cable. It features two rows with a standard 2.54mm (0.100-inch) pitch and row spacing, and forked gold-plated contacts with a 15.0 microinch (0.38 micrometer) thickness for reliable signal integrity.</p><p>&nbsp;</p><p>This free-hanging (in-line) connector includes feed-through design and a polarizing key for correct orientation during mating. The black housing supports efficient cable assembly without the need for additional crimping or soldering, making it ideal for high-density cable-to-board interfaces.</p><p>&nbsp;</p><p>Typical applications include internal wiring in computer peripherals, industrial equipment, and data communication systems where secure, mass-terminated ribbon cable connections are required. Its compact design and low-profile support streamlined cable management.</p>

<p>This IC socket from TE Connectivity is a DIP type with 18 positions arranged in a 2x9 grid, 2.54mm pitch, and 0.3 inch (7.62mm) row spacing. It features through hole mounting with solder termination, making it suitable for standard PCB assembly.</p><p>&nbsp;</p><p>The contacts are made of beryllium copper with a gold flash finish for reliable electrical performance and corrosion resistance. The housing is constructed from polycyclohexylenedimethylene terephthalate (PCT) and polyester, providing good mechanical strength and thermal stability. The open frame design allows airflow and facilitates inspection of solder joints.</p><p>&nbsp;</p><p>The socket operates across a wide temperature range of -55°C to 105°C, accommodating harsh environments. It is RoHS3 compliant and REACH unaffected, though these compliance claims are unverified. This component is ideal for prototyping, production, and testing applications where a reliable connection to an 18-pin DIP IC is required.</p>

<p>The TE Connectivity 7-1437539-0 is a 24-position dual in-line package (DIP) socket designed for reliable IC-to-PCB connections. It features a through hole mounting style with solder termination and an open frame housing made of polyester. The precision four-finger inner contacts are made of copper alloy with a gold plating thickness of 5.00 µinch (0.127 µm), ensuring low and stable contact resistance of 10 mΩ maximum. The pitch is 2.54 mm (0.100 inch), compatible with standard DIP ICs.</p><p>&nbsp;</p><p>The socket is rated for a contact current of 3 A per pin and can withstand a dielectric withstanding voltage of 1000 V RMS. It operates over a temperature range of -55°C to +105°C. The open frame design allows for easy cleaning and inspection after soldering. Insertion force is 300 g maximum and withdrawal force is 63 g minimum, typical for four-fingered contacts. This socket is suitable for industrial controls, medical devices, military equipment, and other embedded systems requiring dependable IC socketing.</p>

<p>The TE Connectivity 1-1658622-0 is a 50 position IDC receptacle connector designed for use with 26-28 AWG ribbon cable. It features a 2.54mm (0.100") pitch and 2 rows with a row spacing of 0.100" (2.54mm). The connector uses forked contacts with a gold or gold-palladium finish (30.0µin / 0.76µm thickness) for reliable signal integrity.</p><p>&nbsp;</p><p>This connector is a free hanging (in-line) IDC termination type, making it suitable for cable-to-board or cable-to-cable applications where a compact, reliable connection is needed. The black housing includes feed through and polarizing key features for correct alignment and secure mating.</p><p>&nbsp;</p><p>The 1-1658622-0 is designed for 26-28 AWG ribbon cable and is RoHS3 compliant and REACH unaffected. It is part of TE Connectivity's broad range of rectangular connectors for industrial and commercial interconnect applications.</p>

<p>The TE Connectivity 63969-1 is a standard female quick connect receptacle designed for through hole mounting. It accepts tab widths of 0.205" (5.21mm) and 0.250" (6.35mm) with a tab thickness of 0.032" (0.81mm). The terminal is non-insulated with a brass contact material and tin finish. Termination is via solder, and the overall length is 12.19mm (0.480"). This part is RoHS3 compliant and has an MSL of Level 1.</p><p>&nbsp;</p><p>Typical applications include wire-to-board or wire-to-wire connections in power distribution, automotive, and industrial equipment where a reliable quick disconnect is required. The through hole design provides mechanical stability, and the tin finish ensures good solderability and corrosion resistance.</p>

<p>The TE Connectivity 1-2040537-1 is an Industrial Mini Type II header connector designed for high-density industrial I/O applications. It features 8 positions with a 1.27mm pitch, enabling compact PCB layouts. The connector uses a through hole right angle mounting style, making it suitable for board-to-board or wire-to-board connections where space is limited. Contacts are made of copper alloy with a gold finish on the contact area (0.5µm minimum) and tin plating on the solder tails, ensuring reliable conductivity and corrosion resistance. The housing is molded from thermoplastic with UL94V-0 flammability rating, providing durability in demanding environments. Additional features include board guide and board lock for secure alignment and retention. The connector is part of the Industrial Mini I/O series, supporting Type II configuration. It is RoHS compliant and REACH unaffected, meeting environmental standards. The 1.27mm pitch and DIP lead style make it compatible with standard PCB layouts. Typical applications include industrial automation, control systems, and data communication equipment. The connector is designed for a solder termination process and can withstand multiple mating cycles.</p>

<p>The TE Connectivity 5-5530843-4 is a dual female edgeboard connector designed for reliable card edge connections. It accommodates PCBs with a thickness range of 0.054" to 0.070" (1.37mm to 1.78mm) and offers 40 positions arranged on a standard 0.100" (2.54mm) pitch in a dual readout configuration. The connector uses through-hole mounting with solder termination for secure attachment to the motherboard.</p><p>&nbsp;</p><p>Contacts are made from phosphor bronze with a 30µin (0.76µm) gold plating, ensuring excellent conductivity and corrosion resistance. The operating temperature range spans -55°C to 85°C, suitable for a wide range of environments. The black insulator is rated for wave soldering up to 265°C.</p><p>&nbsp;</p><p>This part is EU RoHS compliant (Directive 2011/65/EU including Delegated Directive 2015/863/EU) and does not contain REACH SVHC as of the January 2023 ECHA candidate list. It is not halogen-free, containing bromine or chlorine above 900 ppm.</p>