Solid State Devices Inc (SSDI)

<p>The 1N2974B is a 10W Zener diode with a nominal Zener voltage of 10V. It is housed in a hermetically sealed DO-203AA (DO-4) stud mount package, designed for robust power regulation applications.</p><p>&nbsp;</p><p>Key electrical characteristics include a Zener impedance of 3 Ω, a reverse leakage current of 10 µA at 7.6V, and a forward voltage of 1.5V at 2A. The device operates over a junction temperature range of -65°C to +175°C and has a thermal resistance of 12°C/W junction-to-case.</p><p>&nbsp;</p><p>The stud mount configuration with solder tab termination allows efficient heat sinking, making it suitable for high-reliability power supply and voltage reference circuits. The part is inherently radiation hard and nonsensitive to ESD per MIL-STD-750.</p>

<p>The 1N6051A is a bidirectional transient voltage suppressor (TVS) diode from the 1N6036A-1N6072A series. It is designed for through-hole mounting in a hermetic DO-13 (DO-202AA) metal package. The device provides 1500 W peak pulse power capability at 10/1000 µs waveform with a clamping response time of less than 100 ps.</p><p>&nbsp;</p><p>Key electrical specifications include a reverse standoff voltage (VRWM) of 45.7 V, a peak pulse current (I_PP) of 33 A, and an average power dissipation of 1 W at +125 °C lead temperature. The junction and storage temperature range extends from -55 to +175 °C. The part is suitable for general-purpose transient protection applications.</p><p>&nbsp;</p><p>The DO-13 package features axial leads for through-hole assembly. The device is not rated for power line protection. It is most often used for protecting against transients from inductive switching, induced RF effects, or secondary lightning effects per IEC61000-4-5.</p>

<p>The 1N6070A is a high-power bidirectional transient voltage suppression (TVS) diode manufactured by Solid State Devices Inc. Designed to protect sensitive electronic circuits from voltage transients, it offers a peak pulse power rating of 1500W (1.5kW) and a peak pulse current of 5.4A. The reverse standoff voltage is 278V, making it suitable for applications requiring robust overvoltage protection at elevated voltages.</p><p>&nbsp;</p><p>This TVS diode features a single bidirectional channel, allowing it to clamp both positive and negative transients symmetrically. It is not designed for power line protection and is intended for general-purpose circuit protection. The device is mounted using through-hole technology and comes in a DO-13 package, with the DO-13 also serving as the supplier device package.</p><p>&nbsp;</p><p>Typical applications include transient suppression in industrial, telecommunications, and consumer electronics where high-energy surges may occur. The DO-13 package provides reliable mechanical support and thermal performance for through-hole PCB mounting.</p>

<p>The 1N6068A is a Zener-type transient voltage suppression (TVS) diode designed for general-purpose circuit protection. It features a reverse standoff voltage of 245V and can handle peak pulse power up to 1500W (1.5kW). The device is unidirectional with a single protection channel and does not include power line protection.</p><p>&nbsp;</p><p>This TVS diode is mounted using through-hole technology and comes in a DO-13 package (also known as DO-13). It is suitable for applications requiring robust transient suppression in a compact, industry-standard package. The part is RoHS3 compliant and has an MSL (Moisture Sensitivity Level) of Level 1 (unlimited), with REACH unaffected status.</p><p>&nbsp;</p><p>Designed for general-purpose use, the 1N6068A provides reliable clamping of voltage transients. Its peak pulse current rating is 6.1A, and the clamping voltage is approximately 246V (inferred from power and current). The device is intended for use in environments where through-hole mounting is preferred.</p>

<p>The 1N3340B is a 50W Zener diode with a nominal Zener voltage of 100V and ±5% tolerance. It is designed for voltage regulation in high-power applications and is housed in a DO-203AB (DO-5) stud mount package with standard anode-to-case polarity.</p><p>&nbsp;</p><p>Electrical characteristics include a forward voltage of 1.5V at 10A, a Zener impedance of 20Ω, and a leakage current of 5µA at 76V reverse voltage. The device can operate over a junction temperature range of -65°C to +175°C and has a thermal resistance of 2.0°C/W from junction to case.</p><p>&nbsp;</p><p>The stud mount design allows for efficient heat sinking, making it suitable for power supply and industrial control circuits. The hermetic seal provides robust environmental protection.</p>