Schurter Inc.

<p>The Schurter 7043.8230 is a 20A, 250VAC ceramic cartridge fuse designed for overcurrent protection. It features a slow blow (time-lag) characteristic, making it suitable for circuits with inrush currents. The fuse has a breaking capacity of 1.5kA at rated voltage. It comes in a 3AB/3AG package (0.250" x 1.252") and requires a holder for mounting. It is UR approved. Operating temperature range is -40°C to 70°C. Melting I²t is 1300 A²s. This fuse is commonly used in power supplies, industrial equipment, and appliances.</p>

<p>The Schurter Inc. 0034.5218 is a cartridge glass fuse designed for overcurrent protection in AC circuits. It is rated for 400mA continuous current at 250VAC and features a slow blow (time-lag) response characteristic, making it suitable for circuits with inrush currents.</p><p>&nbsp;</p><p>Electrical specifications include a breaking capacity of 35A at rated voltage, ensuring safe interruption of fault currents. The fuse operates over a wide temperature range from -55°C to 125°C, accommodating harsh environments.</p><p>&nbsp;</p><p>The fuse is housed in the standard 3AB, 3AG package (0.250" diameter x 1.250" length, 6.35mm x 31.75mm) and requires a holder for mounting. It is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>This Schurter FAB series fuse holder is a shock-safe, horizontal-mount accessory designed for 5x20mm cartridge fuses. The slotted cap allows easy fuse replacement without tools while maintaining IP40 protection. Intended for PCB through-hole soldering with straight tin-plated copper alloy terminals.</p><p>&nbsp;</p><p>Rated at 250VAC, the holder accommodates up to 10A continuous current per VDE standards and 12A per UL standards, with a rated power acceptance of 2.5W. Key electrical ratings include a contact resistance of ≤10mΩ, dielectric strength greater than 3kV, impulse withstand voltage greater than 4kV, and insulation resistance of at least 10MΩ.</p><p>&nbsp;</p><p>The housing is constructed from thermoplastic rated UL 94V-0, making it suitable for applications requiring protection class I or II per IEC 61140. It operates across an ambient temperature range of -40°C to 85°C and is classified under climatic category 40/085/21 per IEC 60068-1. The single unit weight is 5.4g, and it is supplied in bulk packaging of 100 pieces.</p>

<p>The Schurter 3404.0020.22 is a member of the OMF 125 series of surface mount fuses. It is rated for 8A continuous current at 125VAC or 125VDC and provides fast blow (quick-acting) overcurrent protection. The fuse has a breaking capacity of 100A at rated voltage and a melting I²t of 20 A²s.</p><p>&nbsp;</p><p>This component is housed in a compact 2-SMD, J-Lead package measuring 7.40mm x 3.10mm x 2.60mm and weighs only 0.08 g. It is designed for direct soldering onto printed circuit boards using reflow or wave soldering methods. The housing is made of thermoplastic rated UL 94V-0, and the terminals are tin-plated copper alloy.</p><p>&nbsp;</p><p>The fuse operates over an admissible ambient temperature range of -40°C to 125°C and is classified as MSL 1 for moisture sensitivity, allowing unlimited floor life. It complies with RoHS, REACH, China RoHS, and CE/UKCA directives, and carries UL (UR) and CSA approvals.</p>

<p>The Schurter 3404.0007.11 is a surface mount fast blow fuse from the OMF 125 series, designed for overcurrent protection in electronic circuits. It is rated at 400 mA continuous current with a voltage rating of 125 VAC and 125 VDC. The fuse offers a breaking capacity of 100 A at rated voltage, suitable for protecting sensitive components.</p><p>&nbsp;</p><p>The operating temperature range is -55°C to 125°C, with an admissible ambient temperature of -40°C to 125°C. The melting I²t is 0.016 A²s, indicating a quick response to overcurrent events. The fuse is housed in a compact 2-SMD J-Lead package measuring 7.40 mm x 3.10 mm x 2.60 mm, weighing just 0.08 g.</p><p>&nbsp;</p><p>This component is designed for surface mount assembly and supports reflow and wave soldering methods. It is manufactured with a thermoplastic housing (UL 94V-0) and tin-plated copper alloy terminals. The fuse is cURus approved and complies with RoHS3 and REACH regulations, with an MSL 1 moisture sensitivity level.</p>

<p>The Schurter 0034.4242 is a subminiature board mount fuse from the MSF 125 series, rated for 200mA at 125VAC/VDC. It features a fast blow (quick-acting) characteristic and a breaking capacity of 100A at rated voltage. The fuse is housed in a radial, can package with a thermoplastic UL 94V-0 housing and tin-plated copper terminals, designed for through-hole mounting and wave soldering.</p><p>&nbsp;</p><p>This fuse is suitable for overcurrent protection in a variety of electronic circuits where a quick response to fault currents is required. Its compact size (0.252" diameter x 0.346" height) allows for dense PCB layouts. The operating temperature range is -25°C to 85°C, and it is rated for 125VAC and 125VDC operation.</p><p>&nbsp;</p><p>The MSF 125 series fuse carries cURus approval and is designed for use in industrial environments. The housing material is thermoplastic with UL 94V-0 flammability rating, and the terminals are tin-plated copper for reliable solderability. The unit weight is 0.34 grams.</p>

<p>The Schurter 8020.5069 is a ceramic cartridge fuse designed for primary protection in high-voltage applications. Rated at 1.25A with a voltage rating of 500VAC and 500VDC, it offers a fast blow (quick-acting) characteristic suitable for sensitive circuit protection. The fuse has a breaking capacity of 1.5kA at rated voltage, ensuring reliable fault interruption.</p><p>&nbsp;</p><p>This fuse belongs to the SHF 6.3x32 series and is housed in a standard 3AB/3AG package (0.250" x 1.252" / 6.35mm x 31.80mm). It requires a holder or clip for mounting, making it suitable for use in fuse holders within power supplies, frequency converters, and power electronics. The ceramic tube with nickel-plated copper alloy end caps provides robust mechanical and thermal performance.</p><p>&nbsp;</p><p>Operating temperature range is -40°C to 85°C, with a climatic category of 40/085/21 per IEC 60068-1. The melting I²t is 2.9 A²s, aiding in coordination with other protective devices. The fuse is cURus approved and complies with RoHS and REACH.</p><p>&nbsp;</p><p>Applications include 3-phase systems, DC circuits, and general power electronics where high voltage and fast overcurrent protection are required.</p>

<p>The Schurter 4700.0003 is a retainer clip accessory intended for use with power entry inlets and outlets. This component is designed to secure mating connectors, ensuring reliable mechanical retention in power entry applications.</p><p>&nbsp;</p><p>The retainer clip is RoHS3 compliant and REACH unaffected, meeting current environmental standards. It is classified with an MSL of 1 (unlimited floor life), simplifying handling and storage requirements.</p><p>&nbsp;</p><p>As a mechanical accessory, the 4700.0003 provides a straightforward solution for enhancing connection integrity in AC power systems. It is suitable for use with compatible Schurter power entry connectors.</p>

<p>The Schurter 7010.2410 is a glass cartridge fuse rated for 1.5A at 125VAC. It features a fast blow response time, making it suitable for protecting sensitive electronic circuits where rapid overcurrent interruption is required. The fuse has a breaking capacity of 35A at rated voltage, ensuring reliable operation under fault conditions.</p><p>&nbsp;</p><p>This fuse is designed for use with a holder, requiring a separate mounting solution. The package is a non-standard cartridge size with dimensions of 0.185" diameter by 0.630" length (4.70mm x 16.00mm). The operating temperature range is -40°C to 70°C, allowing use in a variety of environments.</p><p>&nbsp;</p><p>Applications include general overcurrent protection in consumer electronics, power supplies, and industrial control circuits. The glass construction provides visual indication of fuse status. The melting I²t rating of 0.63 A²s indicates the energy required to blow the fuse, useful for coordination with upstream components.</p>

<p>The Schurter 0034.5624.11 is a 5A 250VAC time-lag T cartridge glass fuse in a 5x20mm package. It features a breaking capacity of 50A at rated voltage and a melting I²t of 102 A²s. The fuse is approved by cURus and VDE, and is RoHS3 compliant. Designed for primary protection on SMD PCBs, it can be directly soldered onto printed circuit boards. The housing is glass with gold-plated copper alloy terminals. Operating temperature range is -55°C to 125°C. This fuse requires a holder for mounting.</p>

<p>The Schurter Inc. 0034.4248 is a subminiature board mount fuse designed for overcurrent protection. It is rated for 710 mA at both 125 VAC and 125 VDC with a fast blow (quick-acting) response. The fuse has a breaking capacity of 100 A at the rated voltage, ensuring reliable interruption of fault currents.</p><p>&nbsp;</p><p>The fuse features a through-hole mounting style in a radial can package, with dimensions of 0.252" diameter by 0.346" height (6.40 mm x 8.80 mm). The housing is made of thermoplastic with UL 94V-0 flammability rating, and the terminals are tin-plated copper for good solderability.</p><p>&nbsp;</p><p>The operating temperature range is -25°C to 85°C, and it can withstand storage conditions of 0°C to 40°C with up to 70% relative humidity. It is approved by cURus, UL, and CSA, making it suitable for various industrial and commercial applications.</p>

<p>The Schurter OMK 63 series fuse (part number 3422.0012.11) is a 2A rated, fast blow (Quick-Acting F) surface mount fuse designed for overcurrent protection in electronic circuits. It is rated for 63VAC and 63VDC operation with a breaking capacity of 50A at rated voltage.</p><p>&nbsp;</p><p>This fuse features a compact 2-SMD square end block package with holder, measuring 12.00mm x 5.20mm x 6.00mm. It is directly solderable on printed circuit boards and supports reflow soldering profiles. The housing is made of thermoplastic UL 94V-0 material with tin-plated copper terminals.</p><p>&nbsp;</p><p>The OMK 63 fuse is designed according to UL 248-14 and CSA22.2 No. 248.14 standards. It is RoHS3 compliant, REACH unaffected, and carries CE and UKCA markings. The operating temperature range is -40°C to 85°C with a climatic category of 40/085/21 per IEC 60068-1.</p>

<p>The 7181.3036 is a 30A fuse manufactured by Schurter Inc. It is designed for overcurrent protection in electrical circuits. The fuse is rated for a continuous current of 30 amperes, making it suitable for applications requiring reliable current limiting. This component is part of the circuit protection category and is commonly used in industrial and commercial power systems.</p>

<p>The Schurter 3403.0171.11 is a surface mount fuse from the UMT 250 series, designed for overcurrent protection in compact SMD applications. It is rated for 3.15A continuous current with a slow blow (time-lag) response, suitable for circuits with inrush currents.</p><p>&nbsp;</p><p>Electrical ratings include 250VAC and 250VDC voltage capability, with a high breaking capacity of 200A at 250VAC (IEC) and 35A at 125VDC. The fuse meets IEC 60127-4, UL 248-14, and CSA 22.2 No. 248.14 standards, with approvals from VDE, UL, CQC, KC, and PSE/JET.</p><p>&nbsp;</p><p>The ceramic housing with tin-plated copper alloy terminals ensures durability and reliable soldering. It is MSL 1 compliant and can withstand reflow and wave soldering profiles. Operating temperature range is -55°C to 125°C.</p><p>&nbsp;</p><p>Typical applications include primary protection on SMD PCBs, medical equipment, and battery protection circuits. The fuse is impermeable to potting compounds, making it suitable for intrinsically safe applications per ATEX/IECEx.</p>

<p>This is a cartridge ceramic fuse from Schurter Inc., part number 0001.2704.11. It is rated for 1A current with a voltage rating of 250VAC and 300VDC. The fuse has a slow blow (time-lag) characteristic, making it suitable for applications with inrush currents.</p><p>&nbsp;</p><p>The breaking capacity is 1.5kA at rated voltage. The fuse measures 5.20mm x 20.00mm and requires a holder for mounting. The operating temperature range is -55°C to 125°C. The housing is made of ceramics.</p><p>&nbsp;</p><p>This fuse is approved by CCC, cURus, and VDE. It is RoHS3 compliant and REACH unaffected (unverified). Moisture sensitivity level is MSL 1. The melting I²t is 1.1 A²s.</p>

<p>The Schurter Inc. 0034.1515 is a fast blow glass cartridge fuse rated for 800 mA at 250 VAC. It features a breaking capacity of 35A at rated voltage, suitable for overcurrent protection in various electronic circuits.</p><p>&nbsp;</p><p>The fuse is housed in a standard 5mm x 20mm glass tube package and requires a holder for installation. It operates over a wide temperature range from -55°C to 125°C. The melting I²t is 0.508 A²s, indicating the energy required to blow the fuse.</p><p>&nbsp;</p><p>This component is approved by CCC, cURus, and VDE agencies, ensuring compliance with international safety standards. It is designed for general-purpose overcurrent protection in power supplies, appliances, and industrial equipment.</p>

<p>The Schurter 0034.6011 is a subminiature board mount fuse from the MSF 250 series. It is rated for 500mA at 250VAC with a fast blow response time. The fuse has a breaking capacity of 35A and a melting I²t of 0.09 A²s. It is designed for through hole mounting in a radial, can, vertical package measuring 8.5mm x 8.5mm.</p><p>&nbsp;</p><p>This fuse operates over a temperature range of -40°C to 85°C and is approved by CCC, cURus, and VDE. The housing is made of thermoplastic with UL 94V-0 flammability rating, and terminals are tin-plated copper. It is suitable for direct soldering on printed circuit boards and complies with IEC 60127-3.</p><p>&nbsp;</p><p>Applications include overcurrent protection in power supplies, industrial controls, and consumer electronics where fast acting protection is required.</p>

<p>The Schurter 4303.2014.05 is a fuse drawer accessory designed for power entry modules in the CD, KD, KEC, and KFC series. It combines a fuse holder for 5x20 mm or 6.3x32 mm fuse links with a voltage selector insert, enabling easy configuration of input voltage.</p><p>&nbsp;</p><p>This component uses a snap-in rear mounting method and is approved for use in equipment compliant with IEC/UL 62368-1, IEC 60601-1, and IEC 60335-1 safety standards. The fuse drawer is not enclosed and must be ordered separately from the power entry module.</p><p>&nbsp;</p><p>Typical applications include audio/video, information and communication technology equipment, medical electrical equipment, and household appliances where a reliable fuse and voltage selection interface is required.</p>

<p>The Schurter 4301.5204 is a compact power entry module (PEM) integrating an IEC 320-C14 inlet, an EMI filter, and a fuseholder for 5x20mm fuses (1- or 2-pole) in a panel-mount package. It supports two mounting styles: screw-on (front or rear side) and snap-in (front side). An optional voltage selector (step switch, 3 positions) is available for multi-voltage applications.</p><p>&nbsp;</p><p>Electrical ratings are 2A at 250VAC (IEC/UL). The integrated EMI filter includes a 100 nF across-line capacitor (CX) and provides leakage current as low as &lt;0.5 mA (standard) or &lt;5 µA (medical version). Dielectric strength exceeds 1.7 kVDC (L-N) and 2.7 kVDC (L/N-PE). Operating temperature range is -25°C to 85°C, with a climatic category of 25/085/21 per IEC 60068-1. Front side ingress protection is IP40.</p><p>&nbsp;</p><p>Termination is via quick connect 0.250" (6.3mm) tabs; flexible wire AWG18 options are available. The module features a V-Lock notch for cord retention and complies with protection class I (IEC 61140). The medical version is suitable for use in medical equipment per IEC/UL 60601-1 (1 MOOP, 1 MOPP). For applications per IEC/UL 62368-1, variants with a bleed resistor are recommended. The fuseholder drawer is sold separately.</p>

<p>The Schurter 0031.3573 is a shock-safe fuseholder from the FAU series, designed for use with 5x20mm and 6.3x32mm (3AG) cartridge fuse-links. It features a horizontal PCB mounting orientation with through-hole solder terminals (PC pins). The fuseholder accepts both standard fuse sizes, offering flexibility in applications.</p><p>&nbsp;</p><p>Electrically, the fuseholder is rated for 16 A current under UL/CSA conditions and 10 A under VDE conditions. The voltage rating is 250 VAC (VDE) and 600 VAC/VDC (UL/CSA). It meets shock-safe category PC2 and has a degree of protection IP40. The rated power acceptance is 3.2 W at 10 A for 6.3x32mm fuse-links, with derating curves available for 5x20mm links.</p><p>&nbsp;</p><p>Mechanically, the unit weighs approximately 5.1 g and is constructed with a thermoplastic black socket (UL 94V-0) and copper alloy tin-plated terminals. It can operate over an ambient temperature range of -40°C to 85°C and is suitable for appliances with protection class I or II according to IEC 61140. The fuseholder has a contact resistance of ≤10 mOhm and dielectric strength &gt;3 kV.</p>

<p>The Schurter OMF 125 series surface mount fuse (part number 3404.0003.11) is a fast-acting (quick-acting F) fuse designed for overcurrent protection in electronic circuits. It is rated for 63 mA at 125 VAC and 125 VDC, with a breaking capacity of 100 A at rated voltage. The fuse features a melting I²t of 0.00011, suitable for sensitive circuit protection.</p><p>&nbsp;</p><p>This fuse is housed in a compact 2-SMD J-Lead package measuring 7.40 mm x 3.10 mm x 2.60 mm, making it ideal for space-constrained PCB designs. It is constructed with a thermoplastic housing (UL 94V-0) and tin-plated copper alloy terminals, ensuring reliable solderability and environmental resistance. The operating temperature range is -40°C to 125°C, with a climatic category of 40/85/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The OMF 125 series is cURus approved and compliant with RoHS and REACH directives. It is suitable for reflow and wave soldering processes, with an MSL 1 moisture sensitivity level. This fuse is designed for direct soldering onto printed circuit boards in industrial and commercial applications.</p>

<p>The Schurter 7010.9830.63 is a surface mount fuse from series 172876, designed for high breaking capacity overcurrent protection. Rated at 2A and 125VAC/VDC, it offers a quick-acting (Fast Blow) characteristic with a breaking capacity of 300A.</p><p>&nbsp;</p><p>This fuse is directly solderable onto printed circuit boards using reflow or wave soldering methods. It features a ceramic tube with tin-plated copper alloy endcaps, measuring 2.00mm x 7.00mm. Operating temperature range is -55°C to 125°C.</p><p>&nbsp;</p><p>Applications include telecom equipment and household appliances. The fuse carries cURus and UL approvals per UL 248-14 and CSA22.2 No. 248.14, and is compliant with RoHS, REACH, CE, UKCA, and China RoHS directives.</p>

<p>The Schurter 4301.0521 is a KEA series IEC 320-C14 appliance inlet module designed for panel mount applications. It combines three functions: an IEC C14 inlet, a fuseholder for 5x20mm fuses (1- or 2-pole), and an optional voltage selector. The module is rated for 10A at 250VAC (IEC and UL/CSA) and features quick connect terminals (4.8 x 0.8mm).</p><p>&nbsp;</p><p>The housing is made of black thermoplastic with a UL94 V-0 flammability rating and offers IP40 front-side protection. The module supports screw-on mounting (front or rear) or snap-in mounting, with panel thickness up to 8mm for screw mount or 1.5/2/2.5mm for snap-in. It is suitable for protection class I equipment and meets IEC/UL 62368-1 requirements.</p><p>&nbsp;</p><p>This unfiltered version is ideal for applications where line filtering is not required, and the integrated fuseholder provides overcurrent protection. The V-Lock notch ensures secure cord retention.</p>

<p>The Schurter 4797.0015 is an IEC 320-2-2/J appliance outlet receptacle designed for panel mount snap-in installation. It features 3 female socket positions and quick connect 0.250" (6.3mm) terminals. The housing is made of black thermoplastic rated UL94 V-0. This unfiltered commercial-grade outlet is rated for 16A at 250VAC per IEC and 20A at 250VAC per UL/CSA. Dielectric strength is 2.5 kVAC between line and neutral and 3 kVAC between line/neutral and protective earth. The operating temperature range is -25°C to 70°C. It is suitable for protection class I equipment and is compatible with V-Lock, P-Lock, and Twylock locking systems. Approvals include CCC, cURus, and ENEC.</p>

<p>The Schurter 3101.7521 is a fuse carrier designed for use with 5x20mm fuse links. It is part of the FPG1/2/6 series of shock-safe fuseholders. The carrier features panel mount installation from the front side with a fixing nut. Termination options include solder lug and quick-connect tabs (4.8 x 0.5 mm).</p><p>&nbsp;</p><p>Electrical ratings: 250 VAC (VDE) / 500 V (UL/CSA) and 10 A (VDE) / 16 A (UL/CSA). The maximum power acceptance is 2.5 W at 10 A and 23 °C ambient temperature, with derating at higher temperatures. The carrier provides IP40 protection in normal use and IP67 when fully assembled, making it suitable for environments requiring dust and water ingress protection.</p><p>&nbsp;</p><p>The housing is made of thermoplastic with UL 94V-0 flammability rating, and terminals are tin-plated copper alloy. The carrier meets protection class I per IEC 61140. It has a contact resistance of ≤10 mΩ at 100 mA, dielectric strength &gt;3 kV, and insulation resistance ≥10 MΩ at 500 VDC. Operating temperature range is -40°C to 85°C. Typical applications include household appliances and medical equipment.</p>

<p>This is a retainer clip accessory manufactured by Schurter Inc. for use with power entry inlets and outlets. It is designed to secure cord connections in power entry plug kits. The component is RoHS3 compliant, meeting current environmental standards. No other specifications are available from the provided data.</p>

<p>The Schurter 4301.1405 is a 1-pole fuse drawer accessory designed for use with power entry modules. It accommodates standard 5x20mm fuse links and features a Fingergrip design for easy fuse replacement. The drawer is panel mounted and is compatible with Schurter power entry modules including DD11, DD12, DD21, DD22, KEA-Print, KFA, and KMF series.</p><p>&nbsp;</p><p>This fuse drawer is suitable for applications requiring overcurrent protection in accordance with IEC/UL 62368-1 safety standards for audio/video, information, and communication technology equipment. It is also suitable for medical electrical equipment per IEC 60601-1.</p><p>&nbsp;</p><p>The 4301.1405 is RoHS3 compliant and REACH unaffected, meeting environmental compliance requirements for global markets.</p>

<p>The Schurter 4301.2022 is an IEC 320-C14 appliance inlet from the KEA series, designed as a compact, unfiltered power entry module.</p><p>&nbsp;</p><p>This component integrates three functions: a Class I appliance inlet per IEC 60320-1, a fuseholder for 5x20mm fuses (1- or 2-pole, fuses not included), and optional voltage selector capability. It uses quick connect terminals (4.8 x 0.8 mm) and mounts via snap-in to a rectangular panel cutout of 27.50mm x 31.50mm (1.50mm panel thickness). The housing is black thermoplastic with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Rated at 10A / 250VAC (both IEC and UL/CSA), the module maintains IP40 front-side protection and is suitable for use in equipment per IEC/UL 62368-1 and IEC 60335-1 for unattended appliances. It accepts V-Lock cord retention and operates from -25°C to 70°C.</p>

<p>The Schurter 0853.9561 is a cap cover accessory designed for use with 5x20mm fuseholders. This cover provides protection and enclosure for the fuseholder, ensuring safe operation in circuit protection applications.</p><p>&nbsp;</p><p>The accessory is RoHS3 compliant and has a Moisture Sensitivity Level (MSL) of 1 (unlimited), indicating no special handling requirements for moisture. It is also REACH unaffected, meeting current European chemical regulations.</p><p>&nbsp;</p><p>As a simple mechanical accessory, the 0853.9561 does not have electrical ratings but is engineered to fit standard 5x20mm fuseholder form factors. It is suitable for use in a wide range of electronic and electrical equipment where fuseholder protection is needed.</p>

<p>The Schurter 0034.5138 is a glass tube cartridge fuse designed for overcurrent protection. It is rated for 4A continuous current at 250VAC with a fast blow (quick-acting) characteristic. The fuse has a breaking capacity of 200A at rated voltage.</p><p>&nbsp;</p><p>This fuse conforms to the 3AB/3AG industry standard package measuring 0.250" diameter by 1.252" length (6.35mm x 31.80mm). It requires a compatible fuse holder or clip for mounting. The glass tube is fitted with nickel-plated copper alloy endcaps.</p><p>&nbsp;</p><p>The fuse is approved by UL and CSA, and is compliant with RoHS, REACH, CE, and UKCA regulations. It operates over a temperature range of -55°C to 125°C and has a climatic category of 55/125/21 per IEC 60068-1. Typical applications include general purpose overcurrent protection in industrial and consumer electronics.</p>

<p>The Schurter 8020.5080 is a ceramic cartridge fuse from the SHF series, designed for primary protection in industrial applications. Rated at 16A with a voltage rating of 500VAC and 400VDC, it offers a fast blow response time.</p><p>&nbsp;</p><p>With a high breaking capacity of 1.5kA at rated voltage, this fuse is suitable for 3-phase and DC applications, power supplies, frequency converters, and power electronics. The melting I²t is 760 A²s, providing reliable overcurrent protection.</p><p>&nbsp;</p><p>The fuse measures 0.250" diameter by 1.252" length (6.35mm x 31.80mm) and requires a fuse holder or clip for mounting. It is constructed with a ceramic tube, nickel-plated copper endcaps, and tin-plated copper axial leads. The operating temperature range is -40°C to 85°C, with storage conditions of 0°C to 60°C at max 70% relative humidity.</p>