Schurter Inc.

<p>The Schurter 4301.3211 is a KEA-Print series IEC appliance inlet C14 with an integrated fuseholder, designed for PCB mounting. It combines two functions: a protection class I appliance inlet and a fuseholder for 5x20mm fuse-links (1- or 2-pole). The module is unfiltered and intended for commercial applications.</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC (IEC and UL/CSA). Dielectric strength exceeds 3kVAC between L-N and 4kVAC between L/N-PE. Operating temperature range is -25°C to 70°C. The front side offers IP40 protection.</p><p>&nbsp;</p><p>Mounting is panel mount with flange or snap-in, and through-hole right-angle solder terminals for a 1.6mm PCB. Panel cutout is rectangular 27.60mm x 31.60mm, accepting panel thickness up to 8mm. The housing is thermoplastic, UL94 V-0 rated.</p>

<p>The Schurter 7010.9968.63 is a surface mount fuse from the MSB series, designed for direct soldering onto printed circuit boards. It features a time-lag T characteristic, making it suitable for applications with inrush currents. The fuse is rated for 5A at 125VAC and 125VDC, with a breaking capacity of 50A at rated voltage.</p><p>&nbsp;</p><p>This fuse has a compact 2.00mm x 7.00mm cartridge package and supports both reflow and wave soldering methods. It is MSL 1 compliant per J-STD-020 and operates over an ambient temperature range of -55°C to 85°C. The ceramic tube construction with tin-plated copper alloy endcaps ensures reliable performance.</p><p>&nbsp;</p><p>Typical applications include telecom equipment and household appliances. The fuse is designed in accordance with IEC 60127-4 and UL 248-14 standards, and is RoHS3, REACH, and China RoHS compliant.</p>

<p>The Schurter UMF 250 series 3405.0173.24 is a surface mount fast blow fuse designed for primary and secondary protection on SMD PCBs. With a current rating of 5A and voltage rating of 250VAC / 125VDC, it offers a breaking capacity range of 100A to 500A. The fast-acting characteristic ensures rapid interruption in overcurrent conditions, with a low melting I²t value of 13.57 A²s for sensitive circuit protection.</p><p>&nbsp;</p><p>This fuse is housed in a ceramic 2-SMD square end block package measuring 10.10mm x 3.00mm x 3.00mm. It is suitable for reflow and wave soldering, with solderability tested at 245°C for 3 seconds and resistance to soldering heat at 260°C for 10 seconds per IEC 60068-2-58. The operating temperature range spans -55°C to 125°C, and it meets Moisture Sensitivity Level 1 (MSL 1) per J-STD-020.</p><p>&nbsp;</p><p>The UMF 250 is impermeable to potting compounds, enabling hermetic seals for intrinsically safe applications per ATEX and IECEx. Applications include battery management systems, medical equipment, power supplies, and illumination. Approvals include cURus and VDE, with UL UR file number E41599.</p>

<p>The Schurter 0031.1001 is a single-circuit cartridge fuseholder designed for panel mount installation. It is rated for 6.3A continuous current at 500V, making it suitable for a variety of circuit protection applications.</p><p>&nbsp;</p><p>The fuseholder accepts standard 5mm x 20mm cartridge fuses and provides a secure holder-style interface. Termination is via solder lugs, and the contact finish is tin. The mounting type is panel mount, allowing for straightforward integration into equipment enclosures.</p><p>&nbsp;</p><p>This component is part of Schurter's FEF series and is intended for use with 5mm x 20mm fuses. It is a basic, reliable fuseholder for overcurrent protection in industrial, commercial, or consumer electronic equipment.</p>

<p>The Schurter 0001.2523 is an 800 mA time-lag T (slow-blow) glass cartridge fuse rated at 250 VAC and 63 VDC. It is part of the SPT 6.3x32 series, designed for overcurrent protection in a variety of electronic circuits.</p><p>&nbsp;</p><p>Electrical characteristics include a breaking capacity of 1.5 kA at 250 VAC and 20 kA at 63 VDC, with a melting I²t of 0.5 A²s. The fuse operates over an ambient temperature range of -40°C to 85°C and is constructed with a glass tube and sand filling, with nickel-plated copper alloy endcaps.</p><p>&nbsp;</p><p>The component uses the industry-standard 3AB / 3AG package (¼" x 1-¼") and requires a fuse holder for mounting. It carries cURus approval and is stored under conditions of 0°C to 60°C with max 70% relative humidity.</p>

<p>The Schurter Inc. 0034.3112 is a time-lag (slow blow) glass cartridge fuse designed for overcurrent protection. It is rated for 315mA at 250VAC and has a breaking capacity of 35A at 250VAC. The fuse features a melting I²t of 0.544 A²s, making it suitable for applications with inrush currents.</p><p>&nbsp;</p><p>The fuse is housed in a standard 5x20mm glass tube with nickel-plated copper alloy endcaps. It requires a holder for mounting and operates over a temperature range of -55°C to 125°C. The component is compliant with IEC 60127-2/3 and UL 248-14 standards.</p><p>&nbsp;</p><p>Typical applications include primary protection in equipment such as power supplies, audio/video devices, and industrial controls. The slow blow characteristic allows the fuse to withstand temporary surge currents without nuisance opening.</p>

<p>The Schurter 8020.5067 is a 0.8A fast blow (quick-acting) ceramic cartridge fuse from the SHF 6.3x32 series. It is rated for 500VAC and 500VDC with a breaking capacity of at least 1.5kA (up to 50kA depending on conditions). Designed for use with a fuseholder or clip, the fuse operates over a -40°C to +85°C temperature range.</p><p>&nbsp;</p><p>The 3AB/3AG (0.250" dia x 1.252" L) size is standard for industrial and electronic applications. Optional axial pigtail leads are tin-plated copper. The fuse carries cURus approval and is RoHS3 compliant, making it suitable for designs requiring recognized safety components.</p><p>&nbsp;</p><p>Typical applications include 3-phase systems, DC circuits, power supplies, frequency converters, and power electronics where high voltage ratings and reliable overcurrent protection are needed.</p>

<p>The Schurter 0034.6713 is a subminiature time-lag T fuse from the MST 250 series designed for direct soldering onto printed circuit boards. It is rated for 630 mA at 250 VAC and 63 VDC, with a breaking capacity of 35 A AC and 50 A DC. The fuse features a time-lag T (slow blow) characteristic, with a melting I²t of 4 A²s. The housing is made of thermoplastic UL 94V-0 rated material with tin-plated copper terminals. The package is a radial can, vertical through-hole with 8.5 mm diameter and height. The operating temperature range is -55°C to 125°C, with a climatic category of 55/125/21 per IEC 60068-1. Storage conditions are 0°C to 40°C at max 70% relative humidity. Typical applications include primary protection on PCBs, power supply adapters for laptops, and SMPS for TVs and DVDs. The fuse carries approvals from CCC, cURus, KC, and VDE.</p>

<p>The Schurter 4832.2300 is a 3.5mm stereo phone jack (female) designed for panel mount applications. It features a 3-pole (TRS) configuration with solder terminals and a screw-on mounting system accommodating wall thickness up to 2.7 mm. The connector is shielded with a screened housing and gold-plated solder terminals for reliable signal transfer.</p><p>&nbsp;</p><p>Electrical ratings include 0.5 A at 30 VAC or 30 VDC, with a dielectric strength of 500 VDC and insulation resistance greater than 100 MΩ at 500 VDC. The operating temperature range is -20°C to 70°C, and the connector is rated for 5000 insertion cycles.</p><p>&nbsp;</p><p>This connector is suitable for audio signal and data transfer applications requiring a secure panel-mounted 3.5 mm jack. It is RoHS, China RoHS, and REACH compliant.</p>

<p>Schurter 0031.3804 is a shock-safe fuseholder designed for printed circuit board mounting. It accepts both 5x20mm and 1/4" x 1-1/4" (6.3x32mm) cartridge fuses, making it versatile for various overcurrent protection applications. The vertical orientation and PC pin termination allow for efficient PCB layout and wave soldering.</p><p>&nbsp;</p><p>The fuseholder is rated for 16A at 400V (UL/CSA) and 10A at 250V (VDE), with a power acceptance of 3.2W at 10A. It features a thermoplastic socket with UL 94V-0 flammability rating and tin-plated copper alloy terminals for reliable electrical contact. The contact resistance is ≤10 mΩ, and dielectric strength exceeds 3 kV.</p><p>&nbsp;</p><p>Designed for protection class I or II applications, the fuseholder offers an IP40 degree of protection and operates over a temperature range of -40°C to 85°C. It meets climatic category 40/085/21 per IEC 60068-1 and is suitable for wave soldering with a solderability of 235°C/2 sec and resistance to soldering heat of 260°C/10 sec.</p><p>&nbsp;</p><p>This fuseholder is ideal for use in industrial controls, power supplies, and consumer electronics where reliable circuit protection is required. Its shock-safe design ensures safe fuse replacement under load conditions.</p>

<p>The Schurter 0034.3122 is a miniature glass tube fuse from the FST 5x20 series, designed for primary protection in equipment. It features a time-lag (slow-blow) characteristic, rated at 3.15 A and 250 VAC, with a breaking capacity of 35 A at rated voltage. The fuse is housed in a 5 mm x 20 mm glass tube with nickel-plated copper alloy endcaps, requiring a holder for mounting. It operates over a temperature range of -55°C to 125°C and is classified under climatic category 55/125/21 per IEC 60068-1. The part carries approvals from CCC, cURus, PSE/JET, and VDE, and is RoHS3 compliant.</p>

<p>The Schurter 7010.6400.13 is a subminiature, quick-acting fuse from the 172321 series, designed for through-hole board mounting with axial leads. It is rated for 3A at 125VAC and 125VDC, with a breaking capacity of 300A at rated voltage. The fuse features a fast blow response time, making it suitable for protecting sensitive circuits where rapid overcurrent interruption is required.</p><p>&nbsp;</p><p>The fuse is housed in a ceramic tube with tin-plated copper axial leads, providing robust mechanical and thermal performance. It operates over a wide temperature range of -55°C to 85°C and meets climatic category 55/085/56 per IEC 60068-1. The component has a melting I²t of 2.4 A²s and is designed for wave soldering with a solderability rating of 235°C for 2 seconds and resistance to soldering heat up to 260°C for 5 seconds.</p><p>&nbsp;</p><p>This fuse is suitable for use in industrial electronics, power supplies, and other applications requiring reliable overcurrent protection in a compact axial-leaded package. Note that this product is in phase-out with last order date 30.03.2025 and last delivery 30.06.2025.</p>

<p>The Schurter 0034.4216 is a subminiature board mount fuse from the MSF 125 series. It is rated for 500 mA at 125 VAC and 125 VDC with a breaking capacity of 100 A. The fuse features a quick-acting (fast blow) characteristic, making it suitable for protecting sensitive circuits where rapid response to overcurrent is required.</p><p>&nbsp;</p><p>The fuse is housed in a radial can package with tin-plated copper terminals for through hole mounting. It operates over a temperature range of -25°C to 85°C and has a melting I²t of 0.02 A²s. The housing is made of thermoplastic with UL 94V-0 flammability rating.</p><p>&nbsp;</p><p>Design considerations include wave soldering compatibility with a solderability of 235°C for 2 seconds and resistance to soldering heat of 260°C for 10 seconds. The fuse meets MIL-STD-202 vibration and mechanical shock requirements. It is cURus approved under UL 248-14.</p>

<p>The Schurter 3404.0021.11 is a surface mount fuse from the OMF 125 series, designed for overcurrent protection in compact electronic assemblies. It is rated for 10 A continuous current at 125 VAC and 125 VDC, with a fast blow (quick-acting) response characteristic. The fuse offers a breaking capacity of 100 A at rated voltage, suitable for secondary circuit protection in power supplies, industrial controls, and consumer electronics.</p><p>&nbsp;</p><p>This fuse is housed in a 2-SMD J-Lead package measuring 7.4 mm x 3.1 mm x 2.6 mm, with a weight of 0.08 g. The housing is made of thermoplastic rated UL 94V-0, and the terminals are copper alloy with tin plating. It is designed for reflow or wave soldering and has a moisture sensitivity level of MSL 1 per J-STD-020.</p><p>&nbsp;</p><p>The operating temperature range is -40°C to 125°C. The fuse carries cURus, UL, and CSA approvals, and is compliant with RoHS and REACH regulations.</p>

<p>The Schurter 5120.1003.0 is a power entry module with integrated EMI/RFI line filter. It features an IEC 320-C14 receptacle with male blades, panel mount with flange, and quick connect 0.250" (6.3mm) terminals. The shielded design provides effective noise suppression for commercial applications.</p><p>&nbsp;</p><p>The module is rated for 4A at 250VAC (IEC 1-10A, UL 1-15A) and offers low leakage current: less than 0.5mA in standard versions and less than 5µA in medical versions. Dielectric strength is greater than 1.7kVDC between L-N and greater than 2.7kVDC between L/N-PE. Operating temperature range is -25°C to 85°C with IP40 protection on the front side.</p><p>&nbsp;</p><p>Mounting options include snap-in for panel thickness 0.8-2mm or screw mounting with plastic flange up to 8mm panel thickness. The module is suitable for protection class I or II installations. Material flammability rating is UL94 V-0. Approvals include CCC, cULus, and ENEC. The design meets medical equipment standards IEC/UL 60601-1 (1 MOOP, 1 MOPP) and is compatible with IEC/UL 62368-1 applications when using bleed resistor variants.</p>

<p>The Schurter 3404.0048.11 is a surface mount fuse from the OMF 125 series, designed for overcurrent protection in compact electronic assemblies. It is rated for 3.15A continuous current at 125VAC or 125VDC, with a breaking capacity of 100A at rated voltage. The fast blow (quick-acting F) characteristic ensures rapid response to overcurrent conditions, making it suitable for protecting sensitive circuits.</p><p>&nbsp;</p><p>This fuse is housed in a 2-SMD J-Lead package measuring 7.40mm x 3.10mm x 2.60mm, compatible with reflow and wave soldering processes. The housing is made of thermoplastic with UL 94V-0 flammability rating, and the terminals are copper alloy with tin plating. It operates over a temperature range of -40°C to 125°C and has a moisture sensitivity level of MSL 1.</p><p>&nbsp;</p><p>The OMF 125 series meets UL 248-14 and CSA 22.2 No. 248.14 standards, with cURus approval. It is RoHS and REACH compliant, suitable for use in industrial and consumer electronics requiring reliable circuit protection.</p>

<p>The Schurter 0034.4227 is a subminiature board mount fuse rated for 4A at 125VAC and 125VDC. It features a fast blow (quick-acting) characteristic with a breaking capacity of 100A at rated voltage. The fuse is designed for direct soldering on printed circuit boards.</p><p>&nbsp;</p><p>Electrical specifications include a melting I²t of 1.9 A²s and case resistance greater than 100 MΩ between leads and body. The operating temperature range is -25°C to 85°C with storage conditions of 0°C to 40°C and max 70% relative humidity. The fuse meets climatic category 25/085/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The fuse is housed in a thermoplastic UL 94V-0 rated body with tin-plated copper terminals. It has a radial lead style and through-hole termination. Dimensions are 0.252" diameter by 0.346" height (6.40mm x 8.80mm) with a unit weight of 0.34g. Terminal strength is minimum 9N tensile load.</p><p>&nbsp;</p><p>The fuse is approved under cURus, UL 248-14, and CSA22.2 No. 248.14. It complies with application standard IEC/UL 62368-1. The part is suitable for use in industrial environments and is designed for wave soldering with solderability at 235°C/2 sec and resistance to soldering heat at 260°C/10 sec.</p>

<p>The Schurter Inc. 0034.1520 is a miniature glass cartridge fuse designed for primary protection in equipment. It is rated for 2.5A at 250VAC with a fast blow (quick-acting) response time. The fuse has a breaking capacity of 35A at rated voltage, suitable for low-breaking capacity applications.</p><p>&nbsp;</p><p>This fuse conforms to IEC 60127-2 standard and is approved by CCC, cURus, PSE/JET, and VDE. The glass tube with nickel-plated copper alloy endcaps ensures reliable performance. The operating temperature range is -55°C to 125°C, with storage conditions of 0°C to 60°C and max 70% relative humidity.</p><p>&nbsp;</p><p>The 5x20mm cartridge package requires a holder for mounting. The melting I²t is 9.19 A²s. This component is RoHS3 compliant, REACH unaffected, and has MSL level 1 (unlimited).</p>

<p>The Schurter 7010.3510 is a D1 series miniature glass cartridge fuse rated at 6.3A and 125VAC. It features a fast blow (quick-acting F) response characteristic and a breaking capacity of 300A at rated voltage. The fuse is housed in a standard 5mm x 20mm glass tube with nickel-plated copper alloy endcaps, requiring a fuseholder or clip for mounting.</p><p>&nbsp;</p><p>This fuse is designed for low breaking capacity applications and is suitable for use in audio/video, information, and communication technology equipment per IEC/UL 62368-1. It operates over an ambient temperature range of -40°C to 70°C and has a climatic category of 40/070/56 per IEC 60068-1. The product is RoHS3 compliant and REACH unaffected.</p>