Schurter Inc.

<p>The Schurter 3101.0050 is a shock-safe fuseholder designed for 5mm x 20mm cartridge fuses. It features a horizontal orientation and is intended for through-hole PCB mounting with solder terminals. The fuseholder is rated for 10 A at 250 VAC (VDE) and 16 A at 500 V (UL/CSA), making it suitable for various applications including household appliances and medical equipment. The housing is made of black thermoplastic with UL 94V-0 flammability rating, and the terminals are copper alloy with tin plating. The unit weight is 4.31 g. The fuseholder has an IP40 degree of protection and is suitable for protection class I appliances. It meets various safety standards including IEC 60335-1. Operating temperature range is -40°C to 85°C. The contact resistance is ≤10 mΩ, dielectric strength &gt;3 kV, and impulse withstand voltage &gt;4 kV. Solderability is 235°C for 2 seconds, with resistance to soldering heat up to 260°C for 10 seconds. Common applications include household appliances and medical equipment due to its shock-safe design and robust electrical ratings.</p>

<p>The Schurter 3404.0020.11 is a surface mount fuse from the OMF 125 series, designed for overcurrent protection in compact electronic circuits. It is rated for 8A continuous current at 125VAC or 125VDC, with a fast-acting (Fast Blow) response characteristic. The fuse offers a breaking capacity of 100A at rated voltage, providing reliable protection under fault conditions. The component is housed in a 2-SMD J-Lead package measuring 7.40mm x 3.10mm x 2.60mm, suitable for automated assembly processes including reflow and wave soldering. It is approved by cURus and UL, and complies with RoHS and REACH requirements. The operating temperature range is -55°C to 125°C, with a melting I²t of 20 A²s. Typical applications include power supplies, industrial controls, and other equipment requiring compact overcurrent protection.</p>

<p>The Schurter 0031.5101 is a single-circuit fuseholder block from the UHB series, designed for 5x20mm cartridge fuses. It is rated for 250VAC and 6.3A, making it suitable for general-purpose circuit protection in industrial equipment.</p><p>&nbsp;</p><p>The fuseholder features a chassis mount design with solder lug terminals. The socket is made of thermoplastic rated UL 94V-1, and the transparent cover is thermoplastic rated UL 94V-0. Contacts are copper alloy with tin plating. The unit weight is 1.5 g.</p><p>&nbsp;</p><p>Electrical characteristics include contact resistance below 10 mΩ at 100 mA, dielectric strength above 3 kV (50 Hz, 1 min), impulse withstand voltage above 4 kV between L-N, and insulation resistance above 10 MΩ at 500 VDC. The admissible ambient temperature range is -40 °C to 85 °C.</p><p>&nbsp;</p><p>The fuseholder is RoHS3, REACH, and China RoHS compliant. It is rated for iron soldering with a solderability profile of 350 °C / 2 sec and resistance to soldering heat of 350 °C / 10 sec per IEC 60068-2-20.</p>

<p>The Schurter DF11.2078.0010.01 is a power entry module from the DF11 series, combining an IEC 320-C14 appliance inlet with a 2-pole circuit breaker and a rocker switch in a single assembly. It is designed for panel mount installation with screw or snap-in fixing options. The module accepts quick connect terminals (6.3x0.8mm) and provides a 3-position (line, neutral, ground) connection.</p><p>&nbsp;</p><p>Electrical ratings are 10A at 250VAC per IEC and 15A at 250VAC per UL/CSA, with dielectric strength exceeding 2.5kVAC between L-N and 3kVAC between L/N-PE. The operating temperature range is -10°C to 55°C, and the front side offers IP40 protection. The housing is made of black thermoplastic rated UL94 V-0, and the pin temperature is rated for 70°C.</p><p>&nbsp;</p><p>This module is suitable for appliances with protection class I or II according to IEC 61140 and carries cULus and ENEC approvals. The panel cutout is rectangular 29.00mm x 73.50mm, with panel thickness up to 8mm for screw mounting or 1-3mm for snap-in mounting. The module is unfiltered, making it ideal for applications where external filtering is required or noise is not a concern.</p>

<p>The Schurter 0034.1523 is a miniature fuse from the FSF 5x20 series, designed for primary protection in equipment. It is a non-resettable, quick-acting (F) fuse with a glass tube construction and nickel-plated copper alloy endcaps. Rated at 5A and 250VAC, it offers a breaking capacity of 100A at rated voltage, complying with IEC 60127-2/2, UL 248-14, and CSA C22.2 no. 248.14 standards.</p><p>&nbsp;</p><p>Electrical characteristics include a typical voltage drop of 80 mV at 1.0 In and maximum of 130 mV, with power dissipation of 1300 mW typical and 2500 mW maximum at 1.5 In. The melting I²t is 33.8 A²s. The fuse operates over a temperature range of -55°C to 125°C and has a climatic category of 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The 5.20mm x 20.00mm (0.205" x 0.787") cartridge requires a holder for mounting. It is approved by CCC, cURus, PSE/JET, and VDE, and is RoHS3 compliant (unverified). The fuse is suitable for overcurrent protection in a wide range of electronic equipment.</p>

<p>The Schurter FUP series shock-safe fuseholder (part number 0031.2510) accepts 5x20mm and 6.3x32mm cartridge fuses. It is rated 30A at 600V (UL/CSA) and 16A at 250/500V (VDE), with a power acceptance of 4W at 16A and 23°C ambient. The holder features a horizontal orientation for through-hole PCB mounting with tin-plated copper alloy PC pin terminals.</p><p>&nbsp;</p><p>Electrical characteristics include contact resistance ≤10 mΩ, dielectric strength &gt;3 kV, impulse withstand voltage &gt;4 kV, and insulation resistance ≥10 MΩ. The housing is made of black thermoplastic rated UL 94V-0, and the unit weighs 13 g. The design meets IP40 protection degree and is suitable for protection class I or II appliances.</p><p>&nbsp;</p><p>This fuseholder is designed for equipment with three-phase supply (400 VAC) and applications up to 16 A (VDE). It accepts both 5x20mm and 6.3x32mm fuse sizes, providing flexibility in fuse selection. The operating temperature range is -40°C to 85°C.</p>

<p>The 7010.1800.12 is a board mount fuse from Schurter Inc. rated for 500 mA at 125 V AC and 125 V DC. It has a fast blow response time and a breaking capacity of 300 A at rated voltage. The fuse is designed for through-hole mounting on printed circuit boards and operates over a temperature range of -55°C to 85°C. It is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). This fuse is suitable for overcurrent protection in a variety of electronic circuits and equipment.</p>

<p>The Schurter 0031.1371 is a fuse holder accessory designed for use with Shock-Safe fuseholders. It serves as a carrier for FIO/FIN type fuses, featuring a screw type mechanism for secure installation. This accessory is part of Schurter's circuit protection product line and is categorized under circuit protection accessories. It is suitable for applications requiring reliable fuse mounting in Shock-Safe holders.</p>

<p>The Schurter 0034.4225 is a subminiature board mount fuse from the MSF 125 series. It is designed for direct soldering onto printed circuit boards, providing overcurrent protection in a compact radial can package. The fuse is rated at 2.5A with a fast blow (quick-acting) response characteristic, suitable for protecting sensitive circuits. Its voltage rating is 125VAC and 125VDC, with a breaking capacity of 100A.</p><p>&nbsp;</p><p>This fuse features a thermoplastic housing rated UL 94V-0 and tin-plated copper terminals. It operates over an ambient temperature range of -25°C to 85°C and can be stored at 0°C to 40°C. The unit weight is 0.34g. It is cURus approved and complies with UL 248-14. The melting I²t is 0.6 A²s, and the climatic category is 25/085/21 per IEC 60068-1.</p><p>&nbsp;</p><p>Typical applications include overcurrent protection in industrial controls, power supplies, and consumer electronics. The through-hole mounting with radial leads facilitates easy PCB assembly. For use with corresponding fuseholders FME, FMR, or FMS.</p>

<p>The Schurter 3403.0272.23 is a 630 mA surface mount fuse from the UMT-H series. It features time-lag (T) characteristic and is rated for 277 VAC and 250 VDC with a breaking capacity of 1500 A.</p><p>&nbsp;</p><p>Designed for primary protection on SMD PCBs, this fuse is suitable for applications such as sensors, power supplies, intrinsically safe illumination, and battery protection. The ceramic housing and Ni/Sn-plated copper alloy terminals ensure reliability.</p><p>&nbsp;</p><p>Packaged in a 2-SMD square end block case measuring 15.40 mm x 5.35 mm x 5.35 mm, it supports reflow soldering. The operating temperature range is -55°C to 125°C. This fuse is approved by CQC, cURus, and VDE and is RoHS3 compliant.</p>

<p>The Schurter Inc. 4303.1212 is a KEC series IEC 320-C14 appliance inlet power entry module. It is a 3-position receptacle with male blades, rated for 10A at 250VAC under both IEC and UL standards (50/60 Hz). This module integrates a 1- or 2-pole fuse holder for 5x20mm or 6.3x32mm fuses (drawer sold separately) and a voltage selector step switch (2-4 digits).</p><p>&nbsp;</p><p>Designed for panel mount snap-in installation, it features quick connect terminals (0.189" / 4.8mm). The thermoplastic housing is rated UL94 V-0 and offers IP40 protection from the front side. Operating temperature range is -25°C to 70°C. It meets glow wire requirements per IEC 60695-2-12/13 and is suitable for use in equipment per IEC/UL 62368-1.</p><p>&nbsp;</p><p>This unfiltered module is ideal for industrial power supplies, medical equipment, and appliances requiring fuse protection and voltage selection. It carries approvals from CCC, CSA, ENEC, and UL. Fuse fuse drawer is not included and must be ordered separately.</p>

<p>The Schurter 0034.2526 is a ceramic cartridge fuse rated at 10 A with a medium blow response time. It is designed for overcurrent protection in circuits up to 250 VAC and 125 VDC. The fuse measures 5 mm in diameter by 20 mm in length, making it compatible with standard 5x20 mm fuseholders. The ceramic tube construction provides enhanced durability, while the nickel-plated copper alloy endcaps ensure reliable electrical contact. The fuse operates over a temperature range of -40°C to 85°C and meets RoHS3, REACH, and China RoHS compliance requirements. Typical applications include power supplies, industrial equipment, and consumer electronics where moderate inrush current tolerance is needed.</p>

<p>The Schurter 7010.3530 is a 10A, 32VAC fast blow (quick-acting) glass cartridge fuse designed for overcurrent protection in low-voltage circuits. Housed in a standard 5x20mm glass tube with nickel-plated copper alloy endcaps, it requires a fuse holder for installation.</p><p>&nbsp;</p><p>This fuse offers a breaking capacity of 300A at 32VAC, suitable for applications where low breaking capacity is acceptable. It operates over an ambient temperature range of -40°C to 70°C and is classified under climatic category 40/070/56 per IEC 60068-1.</p><p>&nbsp;</p><p>The 7010.3530 is RoHS3 compliant and REACH unaffected, making it suitable for use in audio/video, information, and communication technology equipment per IEC/UL 62368-1 safety standards.</p>

<p>The Schurter 0034.3105 is a miniature glass tube fuse from the FST 5x20 series, designed for primary protection in equipment. It is rated for 63 mA at 250 VAC and features a time-lag (slow-blow) characteristic, making it suitable for circuits with inrush currents.</p><p>&nbsp;</p><p>This fuse has a breaking capacity of 35 A at 250 VAC and a melting I²t of 0.0401 A²s. It operates over a temperature range of -55°C to 125°C and is classified under climatic category 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The fuse is housed in a 5mm x 20mm glass tube with nickel-plated copper alloy endcaps. It requires a holder for mounting and uses clip termination. Approvals include CCC, cURus, and VDE.</p>

<p>The Schurter 0034.1507 is a miniature glass tube fuse from the FSF 5x20 series, designed for primary circuit protection in electronic equipment. It is rated for 125 mA at 250 VAC with a fast-acting (quick-acting F) response time, ensuring rapid disconnection under overcurrent conditions.</p><p>&nbsp;</p><p>This fuse offers a breaking capacity of 35 A at rated voltage, suitable for low-breaking-capacity applications. The glass tube construction with nickel-plated copper alloy endcaps provides reliable performance and durability. The operating temperature range spans -55°C to 125°C, with a climatic category of 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The 5mm x 20mm cartridge form factor requires a holder for mounting, making it compatible with standard 5x20mm fuse holders. It carries approvals from CCC, cURus, and VDE, confirming compliance with international safety standards.</p>

<p>The Schurter 0034.1751 is a 3.15A, 250VAC fast blow glass cartridge fuse designed for overcurrent protection in a variety of electronic circuits. Housed in the industry-standard 3AB 3AG package (0.250" diameter x 1.252" length), this fuse provides reliable performance with a breaking capacity of 35A at rated voltage.</p><p>&nbsp;</p><p>With a fast blow response time, the 0034.1751 is suitable for applications where quick interruption of overcurrents is required to protect sensitive components. The fuse operates over a wide temperature range of -40°C to 85°C, making it versatile for different environmental conditions.</p><p>&nbsp;</p><p>This fuse requires a holder for mounting, ensuring secure installation and easy replacement. It is CSA approved and carries RoHS3, REACH, and MSL Level 1 compliance statuses, though these compliance claims are unverified.</p>

<p>The Schurter Inc. 7023.0320 is a ceramic cartridge fuse designed for overcurrent protection in AC circuits. It is rated for 16A continuous current at 250VAC and features a fast blow (quick-acting) response characteristic.</p><p>&nbsp;</p><p>Electrical specifications include a breaking capacity of 10kA at 250VAC, ensuring safe interruption of high fault currents. The fuse has a typical voltage drop of 115 mV at rated current and power dissipation of 2.30 W at 1.1 times rated current. The melting I²t value is 92 A²s at 10 times rated current.</p><p>&nbsp;</p><p>The fuse is housed in a standard 3AB/3AG package (1/4" x 1-1/4") with dimensions 0.250" diameter by 1.260" length (6.35mm x 32.00mm). It requires a holder for mounting. Operating temperature range is -40°C to 85°C. The fuse weighs 2.8 grams.</p><p>&nbsp;</p><p>This component complies with UL 248-14 and CSA C22.2 No. 248.14 standards. It is suitable for use in various electronic and electrical equipment requiring reliable overcurrent protection.</p>

<p>The Schurter 0034.1514 is a 630mA fast blow glass cartridge fuse designed for overcurrent protection in a variety of electronic applications. It is rated for 250VAC and has a breaking capacity of 35A at rated voltage.</p><p>&nbsp;</p><p>This fuse features a melting I²t of 0.303 A²s and operates over a temperature range of -55°C to 125°C. It is housed in a standard 5mm x 20mm glass tube package and requires a holder for mounting.</p><p>&nbsp;</p><p>The component carries approvals from CCC, cURus, and VDE, ensuring compliance with international safety standards. It is also reported as RoHS3 compliant, REACH unaffected, and has an MSL of Level 1 Unlimited, though these compliance claims are unverified.</p>

<p>The Schurter 0001.1012 is a 5x20mm ceramic tube fuse rated at 6.3A and 250VAC. It features a quick-acting (fast blow) characteristic and a high breaking capacity of 1.5kA, making it suitable for primary protection in equipment where overcurrent conditions must be cleared rapidly.</p><p>&nbsp;</p><p>The fuse is constructed with a ceramic tube and nickel-plated copper alloy endcaps. It operates over an ambient temperature range of -55°C to 125°C and is classified under climatic category 55/125/21 per IEC 60068-1. The unit weight is 1.18g.</p><p>&nbsp;</p><p>This fuse requires a holder for mounting and is available in a pigtail lead style. It carries approvals from CCC, cURus, KC, PSE/JET, and VDE, and is CE marked.</p>

<p>The Schurter 0034.3104 is a miniature glass tube fuse from the FST 5x20 series, designed for primary protection in equipment. It is rated at 50 mA and 250 VAC with a time-lag (slow-blow) characteristic, making it suitable for circuits with moderate inrush currents.</p><p>&nbsp;</p><p>This fuse has a breaking capacity of 35 A at 250 VAC and a melting I²t of 0.0363 A²s. It operates over an ambient temperature range of -55°C to 125°C and is classified under climatic category 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The fuse is housed in a 5mm x 20mm glass tube with nickel-plated copper alloy endcaps. It requires a holder for mounting and weighs approximately 1 g. Storage conditions are 0°C to 60°C with maximum 70% relative humidity.</p><p>&nbsp;</p><p>Approvals include CCC, cURus, and VDE, indicating compliance with international safety standards for primary protection in equipment.</p>

<p>The Schurter Inc. 0034.1511 is a 5x20mm glass cartridge fuse designed for overcurrent protection. It is rated for 315mA at 250VAC and features a fast blow (quick-acting) characteristic. The fuse has a breaking capacity of 35A at rated voltage and a melting I²t of 0.0367. It operates over a temperature range of -55°C to 125°C and is suitable for use in equipment requiring primary protection. The fuse requires a holder for mounting and is approved by CCC, cURus, and VDE. It complies with RoHS, REACH, CE, UKCA, and China RoHS directives.</p>

<p>The Schurter 0034.2519 is a 5x20mm ceramic cartridge fuse with a medium-time-lag characteristic. It is rated for 2A at 250VAC and 125VDC, with a breaking capacity of 1kA. The fuse features a ceramic tube with nickel-plated copper alloy endcaps and weighs 0.92g. It operates over a temperature range of -40°C to 85°C and is suitable for applications adhering to IEC/UL 62368-1. The part requires a fuseholder for mounting and is available in a 5mm x 20mm package. Compliance includes RoHS3, REACH, CE, UKCA, and China RoHS.</p>

<p>The Schurter 3404.2328.11 is a surface mount board mount fuse from the OMZ 125 series, designed for direct soldering on printed circuit boards. It offers a rated current of 3 A and a voltage rating of 125 VAC and 125 VDC, with a time-lag T (slow blow) response time suitable for applications with inrush currents.</p><p>&nbsp;</p><p>The fuse provides a breaking capacity of 100 A at rated voltage. It comes in a 2-SMD, square end block with holder package measuring 12.00 mm x 5.20 mm x 6.00 mm and weighs 0.47 g. The housing is made of thermoplastic rated UL 94V-0, and the terminals are tin-plated copper.</p><p>&nbsp;</p><p>The device operates over an ambient temperature range of -40 °C to 85 °C and has a climatic category of 40/085/21 per IEC 60068-1. It is designed and suitable for applications in accordance with UL 248-14 and CSA22.2 No. 248.14, and can be used in equipment compliant with IEC/UL 62368-1.</p>

<p>The Schurter 0034.3101 is a miniature glass tube fuse from the FST 5x20 series, designed for primary protection in equipment. It is rated for 20 mA at 250 VAC and features a time-lag T (slow-blow) characteristic, making it suitable for applications with inrush currents.</p><p>&nbsp;</p><p>The fuse has a breaking capacity of 35 A at rated voltage and a melting I²t of 0.0012 A²s. It operates over a temperature range of -55°C to 125°C and is classified under climatic category 55/125/21 per IEC 60068-1.</p><p>&nbsp;</p><p>The 5x20 mm glass body has nickel-plated copper alloy endcaps and requires a holder for mounting. The unit weight is 1 g. Storage conditions are 0°C to 60°C with a maximum relative humidity of 70%.</p>

<p>The Schurter 0001.1014 is a 5x20mm ceramic cartridge fuse rated for 10A at 250VAC. It features a fast blow (quick-acting) characteristic and a breaking capacity of 1.5kA. The fuse is designed for primary protection in equipment per IEC 60127-2. It has an operating temperature range of -55°C to 125°C and a melting I²t of 141 A²s. The ceramic tube with nickel-plated copper alloy endcaps ensures high breaking capacity. The fuse requires a holder for mounting and measures 5.20mm diameter by 20.00mm length. It is approved by cURus, KC, PSE/JET, and VDE. The unit weight is 1.18g.</p>