On Semiconductor

<p>The 1N5248B is a Zener diode from On Semiconductor with a nominal Zener voltage of 18V (typical, range 17.1V to 18.9V) and ±5% tolerance. It offers a power dissipation of 500mW with a derating of 4mW/°C above 50°C. The Zener impedance is 21Ω at the 7mA test current and 600Ω at 0.25mA. The reverse leakage current is 100nA at 14V reverse voltage.</p><p>&nbsp;</p><p>The device is housed in a DO-35 (DO-204AH) axial lead through-hole package and supports an operating junction temperature range of -65°C to 200°C. The temperature coefficient is 0.085%/°C. Forward voltage is 1.2V at 200mA forward current.</p><p>&nbsp;</p><p>The 1N5248B is marked as RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified. The part is suitable for voltage regulation, overvoltage protection, and reference voltage applications in low-power circuits.</p>

<p>The BAW56 is a dual common anode small signal switching diode designed for high-speed signal processing and rectifying applications. It is rated for a maximum repetitive peak reverse voltage of 85V and an average forward current of 215mA per diode (125mA when both diodes are loaded). The forward voltage is 1.25V at 150mA, with lower drops at lower currents (1.0V at 50mA, 855mV at 10mA, 715mV at 1mA). Reverse recovery time is 4ns, enabling fast switching. Peak forward surge current reaches 2A for 1µs pulses. Leakage current is limited to 1µA at 75V and 25°C. Junction capacitance is typically 2pF at 0V.</p><p>&nbsp;</p><p>The device is housed in a surface-mount SOT-23 package (TO-236, SC-59) and weighs approximately 0.01g. It is rated for operation up to 150°C junction temperature and has a power dissipation of 350mW when mounted on 3mm² copper pads. Moisture sensitivity level is MSL 1 (unlimited). The part is RoHS compliant, lead-free, and halogen-free. It is classified as industrial grade per the datasheet.</p>

<p>The ESD10201MUT5G is a transient voltage suppressor (TVS) diode manufactured by On Semiconductor. This component is designed to protect sensitive electronic circuits from voltage transients and electrostatic discharge events.</p><p>&nbsp;</p><p>This TVS diode is RoHS3 compliant and REACH unaffected, meeting current environmental standards. It has a moisture sensitivity level (MSL) of 1, indicating unlimited floor life before soldering.</p><p>&nbsp;</p><p>As a TVS diode, it is suitable for use in circuit protection applications where overvoltage protection is required. The specific electrical characteristics such as standoff voltage, breakdown voltage, and clamping voltage are not provided in the available data.</p>

<p>The 1N4740ATR is a Zener diode from On Semiconductor designed for voltage regulation and clamping applications. It provides a nominal Zener voltage of 10V with a tolerance of ±5%, ensuring consistent performance within specified limits. The device is rated for a maximum power dissipation of 1W, making it suitable for low-power circuits.</p><p>&nbsp;</p><p>Electrical characteristics include a maximum impedance (Zzt) of 7Ω and a reverse leakage current of 10µA at 7.6V. The operating temperature range spans from -65°C to 200°C, allowing use in harsh environments. The diode is packaged in a through-hole DO-41 (DO-204AL) axial leaded package, which facilitates easy insertion into printed circuit boards and prototyping.</p><p>&nbsp;</p><p>Typical applications include voltage regulation, overvoltage protection, and reference voltage generation in analog and digital circuits. The robust construction and wide temperature range make it a reliable choice for industrial and consumer electronics.</p>