Cosel

<p>The Cosel PBA30F-24-N is an AC/DC converter with a power rating of 30W and an output voltage of 24V. This component is part of the PBA30F series, designed for efficient and reliable power conversion.</p><p>&nbsp;</p><p>As an AC/DC converter, it transforms alternating current input into direct current output, making it suitable for a wide range of electronic devices and systems that require a stable DC power source. The 30W power capacity and 24V output voltage are key specifications for applications needing moderate power levels.</p><p>&nbsp;</p><p>This converter is suitable for integration into various industrial and commercial applications where a dependable power supply is critical. Its design focuses on performance and reliability, ensuring consistent operation.</p><p>&nbsp;</p><p>Further details regarding package type, mounting options, and specific environmental ratings would typically be found in the product datasheet.</p>

<p>The Cosel PBA15F-24-N is an enclosed AC-DC converter designed for chassis mounting. It provides a single 24V output rated at 0.7A (15W) and accepts a universal input voltage range of 85 to 264 VAC at 50/60 Hz, with DC input capability. Efficiency reaches up to 78% under typical conditions.</p><p>&nbsp;</p><p>Built-in protections include overcurrent protection (105% rated current, auto recovery) and overvoltage protection (30.0-37.0V). The converter offers high isolation: 3000 VAC input-to-output, 2000 VAC input-to-FG, and 500 VAC output-to-FG. Leakage current is low at 0.15/0.30 mA (100V/240V AC).</p><p>&nbsp;</p><p>The PBA15F-24-N is approved to CE, cURus, and TUV standards, and is intended for commercial ITE (Information Technology Equipment) applications. It complies with RoHS3 and REACH regulations (unverified).</p>

<p>The Cosel LFA100F-12 is an AC/DC converter designed for commercial ITE applications. It provides a single 12V output with a current rating of 8.5A. The converter achieves an efficiency of 84.5% and offers 3kV input-to-output isolation for safety. It is approved to standards 60950-1 and 62368-1, with certifications from CE, CSA, cURus, TUV, and UL. The open frame design allows for chassis mounting, with dimensions of 154.9mm x 62.0mm x 33.5mm. The operating temperature range is -10°C to 70°C. This converter is suitable for a variety of commercial power supply applications requiring a regulated 12V output.</p>

<p>The Cosel PBA300F-24 is an enclosed AC/DC converter from the PBA series, designed for commercial ITE applications. It delivers a single output of 24V at 14A, providing 300W of continuous power. The converter accepts a universal input voltage range of 85 to 264 VAC and is also DC input capable, offering flexibility for various power sources.</p><p>&nbsp;</p><p>With an efficiency rating of 82%, the PBA300F-24 is suitable for space-constrained installations requiring reliable power conversion. The chassis mount form factor simplifies integration into equipment enclosures. Safety and compliance approvals include CE, cURus, and TUV, ensuring adherence to international standards.</p><p>&nbsp;</p><p>This model features universal input capability and is designed for commercial (ITE) environments. The enclosed construction provides protection and durability for industrial and commercial power systems.</p>

<p>The Cosel LEA75F-48 is an AC/DC converter designed for reliable power conversion. This unit provides a stable output voltage of 48V with a maximum output current of 1.1A, resulting in a maximum output wattage of 52.8W.</p><p>&nbsp;</p><p>This converter is suitable for various applications requiring a specific DC voltage from an AC input. Its specifications indicate a focus on efficiency and stable power delivery, making it a dependable component for electronic designs.</p><p>&nbsp;</p><p>Further details regarding operating temperature, package type, and specific application suitability would typically be found in the manufacturer's datasheet. However, the core electrical specifications provide a clear understanding of its capabilities for power supply applications.</p>

<p>The Cosel CBS504812 is a 50W isolated DC-DC converter from the CBS series, designed for telecommunications and industrial applications. It accepts a wide input voltage range of 36-76V DC and provides a regulated 12V output at up to 4.2A.</p><p>&nbsp;</p><p>Key electrical characteristics include a typical efficiency of 88% at nominal input and full load, line regulation of 24mV max, load regulation of 24mV max, and ripple and noise of 150mVp-p max over the -20 to +100°C temperature range. The converter also features overcurrent protection (105% of rating, auto recovery), overvoltage protection (13.80-16.80V), and remote on/off with negative logic.</p><p>&nbsp;</p><p>The CBS504812 is packaged in a half brick (61.0mm x 57.9mm x 12.7mm) with through-hole mounting and M3 tapped mounting holes. Operating temperature range is -40°C to +100°C with derating. Safety agency approvals include UL60950-1, C-UL, and TUV.</p>

<p>The Cosel CBS504824 is an isolated DC-DC converter module from the CBS series. It accepts an input voltage range of 36-76V (nominal 48V) and provides a regulated 24V output at up to 2.1A with 88% typical efficiency. The module features remote on/off control, overcurrent protection (OCP), overvoltage protection (OVP), and over temperature protection (OTP).</p><p>&nbsp;</p><p>Designed for ITE (commercial) applications, the CBS504824 operates over a temperature range of -40°C to 100°C with derating. The converter is mounted in a 13-DIP through hole package with dimensions 61.0mm x 57.9mm x 12.7mm (half brick form factor). Line and load regulation are 48mV max, and ripple is 120mVp-p max over the operating temperature range.</p><p>&nbsp;</p><p>The module carries CE marking and is claimed to be RoHS3 compliant (unverified). It is suitable for bus converter applications in telecommunications and industrial equipment.</p>

<p>The Cosel LDC15F-2-SN is a compact AC/DC power supply designed for various applications requiring stable voltage conversion. It features a universal input voltage range of 85-264 VAC, making it suitable for global use. This model delivers a total power of 10W, with specific output voltages of +5V and +/-15V.</p><p>&nbsp;</p><p>Key electrical specifications include an efficiency of 72% and an inrush current of 50A. The power supply is designed with built-in protection circuits for inrush current, overcurrent, and overvoltage. It also meets stringent safety agency approvals, including UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, and EN50178, and complies with DEN-AN standards.</p><p>&nbsp;</p><p>Designed with a PCB construction, the LDC15F-2-SN is intended for integration into electronic systems. It adheres to EMI standards such as FCC-B, VCCI-B, CISPR22-B, and EN55022-B, ensuring minimal electromagnetic interference. The product comes with a 2-year warranty and is RoHS compliant.</p><p>&nbsp;</p><p>This AC/DC converter is suitable for applications requiring multiple voltage rails from a single input source. Its robust design and comprehensive safety certifications make it a reliable choice for industrial and commercial electronic equipment.</p>

<p>The Cosel CBS1004824 is a high-efficiency isolated DC-DC converter from the CBS100 series, designed for board-mount applications requiring a regulated 24V output. It accepts a wide input voltage range of 36V to 76V, making it suitable for 48V telecom and industrial bus systems.</p><p>&nbsp;</p><p>With a rated output power of 100W at 4.2A, this converter achieves up to 88% efficiency. It features built-in protection circuits including overcurrent protection (OCP), overvoltage protection (OVP), and overtemperature protection (OTP), along with remote on/off control. The operating temperature range spans from -40°C to 100°C with derating.</p><p>&nbsp;</p><p>The module is housed in a 9-DIP through-hole package with dimensions of 61.0mm x 57.9mm x 12.7mm, suitable for automated assembly.</p>

<p>The Cosel BRFS50L is a non-isolated point-of-load (PoL) DC DC converter module designed for commercial ITE applications. It delivers a maximum output current of 50A with an adjustable output voltage range of 0.7V to 2V. The module achieves 88% efficiency and includes protection features such as remote on/off, overcurrent protection (OCP), and overtemperature protection (OTP).</p><p>&nbsp;</p><p>Housed in a compact 14-SMD surface-mount package measuring 33.0mm x 22.9mm x 7.0mm, the BRFS50L operates over a temperature range of -40°C to 85°C with derating. It is approved by CE, cURus, and TUV agencies.</p><p>&nbsp;</p><p>This module is suitable for powering low-voltage, high-current loads in commercial electronics where board space is limited and high efficiency is required.</p>

<p>The Cosel LGA50A-12 is an open frame AC/DC power supply converter designed for ITE (Commercial) applications. It delivers a stable 12V DC output with a maximum current of 4.3A, resulting in a total output power of 51.6W.</p><p>&nbsp;</p><p>This converter accepts a wide input voltage range of 85-264 VAC and operates at frequencies between 47-440 Hz. It boasts an efficiency of 82% and includes built-in protection circuits for inrush current, overcurrent, and overvoltage.</p><p>&nbsp;</p><p>Key electrical specifications include line regulation of 48mV, load regulation of 100mV, and ripple noise of 150mVp-p. The operating temperature range is -10°C to 60°C. The unit features a compact mechanical design with dimensions of 132.1mm in length, 50.0mm in width, and 28.4mm in height.</p><p>&nbsp;</p><p>Safety features include an isolation voltage of 2000 VAC. The LGA50A-12 is compliant with RoHS directives and carries CE, Low Voltage Directive, and UKCA markings, indicating adherence to relevant safety and environmental standards for commercial electronic equipment.</p>

<p>The Cosel CBS2004815 is an isolated DC-DC converter module from the CBS series. It delivers a single regulated 15V output at 13.4A, with an input voltage range of 36-76V (typical for 48V input systems). The module achieves 88% efficiency and includes built-in protection features: overcurrent (OCP), overtemperature (OTP), and overvoltage (OVP) protection, as well as remote on/off control.</p><p>&nbsp;</p><p>Designed for commercial ITE applications, it operates over a temperature range of -40°C to 100°C with derating. The converter is housed in a 9-DIP through-hole package measuring 61.0mm x 57.9mm x 12.7mm, suitable for board mounting. It is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited).</p>

<p>The Cosel DHS100A05 is a 100W isolated DC-DC converter designed for distributed power systems. It provides a single 5V output at 20A with an efficiency of 85% typical. The input voltage range is 60-160V DC, making it suitable for a variety of industrial and commercial power architectures.</p><p>&nbsp;</p><p>This converter features overcurrent, overvoltage, and thermal protection circuits, along with remote ON/OFF capability. The output voltage can be adjusted via external resistor or voltage, offering flexibility in system design. The module is housed in a compact 6-DIP through-hole package measuring 58.4mm x 37.3mm x 12.7mm, ideal for space-constrained board layouts.</p><p>&nbsp;</p><p>With an operating temperature range of -40°C to 100°C (with derating), the DHS100A05 can withstand harsh environments. It is certified to UL60950-1, C-UL, and EN62368-1 safety standards, and complies with RoHS and REACH regulations. The module is intended for ITE (commercial) applications and carries a 5-year warranty.</p>

<p>The Cosel PMA100F-24 is an AC DC converter from the PMA series, offering a single output of 24V DC at 4.5A, delivering 100W of power. It operates from a universal AC input of 85-264 VAC at 50/60 Hz and provides 2 kV input-to-output isolation. With an efficiency of 86%, it is designed for medical electric equipment and complies with safety standards UL60601-1, CSA-C22.2 No.601.1, and EN60601-1, as well as EMI standards including FCC-B and CISPR11-B.</p><p>&nbsp;</p><p>The converter features an open frame, chassis mount design, with dimensions of 167.9 mm x 34.0 mm x 93.0 mm. It includes internal dual fuses and a harmonic attenuator meeting IEC61000-3-2. The operating temperature range is -10°C to 70°C, and it carries CE, cURus, and TUV approvals.</p><p>&nbsp;</p><p>This power supply is suitable for medical and other applications requiring a reliable, isolated 24V source. The PMA series offers a 5-year warranty as per the instruction manual.</p>

<p>The Cosel LFA30F-24-Y is an AC-DC power supply designed for various applications requiring a stable 24V DC output. This open-frame unit features a universal input voltage range of AC85-264V, making it suitable for global use.</p><p>&nbsp;</p><p>Key electrical specifications include an output current of 0.5A and an output voltage of 24V. The device offers efficiencies ranging from 68.5% to 83.0% depending on the input voltage and load conditions. It also incorporates built-in protection circuits for inrush current, overcurrent, and overvoltage, enhancing reliability and safety.</p><p>&nbsp;</p><p>Designed with a compact PCB construction, the LFA30F-24-Y is suitable for integration into space-constrained systems. It complies with relevant safety and EMI standards, including UL60950-1, C-UL(CSA60950-1), EN62368-1, and FCC-B, CISPR22-B. The power supply also features harmonic attenuation compliant with IEC61000-3-2.</p>

<p>The Cosel ADA600F-24-F is an enclosed AC-DC converter from the ADA series, designed for commercial ITE applications. It delivers a nominal 24V output with a convection rating of 360W (15A at AC200V) and up to 600W (25A at AC200V) with forced air cooling. The unit accepts a wide input range of AC85-264V or DC120-350V, making it suitable for global use.</p><p>&nbsp;</p><p>Key electrical specifications include typical efficiency of 84% at AC100V and 86% at AC200V, power factor correction (0.99 typ at AC100V), and compliance with harmonic attenuation (IEC61000-3-2). The converter features overcurrent and overvoltage protection, adjustable output voltage (21.6-27.0V), and low ripple noise (150 mVp-p max). Optional features include remote ON/OFF, alarms, and current monitoring.</p><p>&nbsp;</p><p>The unit is chassis mountable with dimensions of 195.0 x 127.0 x 65.0 mm. It is approved to UL60950-1, C-UL(CSA60950-1), and EN62368-1, and meets EMI standards FCC-B, CISPR22-B, EN55022-B, and VCCI-B. The ADA600F-24-F comes with a 5-year warranty.</p>

<p>The Cosel LFA15F-24-SNY is an enclosed AC-DC power supply designed for ITE (Commercial) applications. It features a universal input voltage range of 85-264 VAC, providing flexibility for global use.</p><p>&nbsp;</p><p>The converter delivers a stable 24VDC output with a maximum current of 0.7A, resulting in a maximum output wattage of 16.8W. Key electrical specifications include an efficiency of 81.5%, line regulation of 96mV, load regulation of 150mV, and ripple noise of 120mVp-p. It also provides an isolation voltage of 3kV.</p><p>&nbsp;</p><p>Designed for reliability, the LFA15F-24-SNY operates within a temperature range of -10°C to 70°C. The series is known for its small PCB construction, built-in protection circuits for inrush current, overcurrent, and overvoltage, and compliance with harmonic attenuator standards (IEC61000-3-2). Some models in the LFA series also include power factor correction and reduced standby power circuits.</p><p>&nbsp;</p><p>This model is part of the LFA series, which offers safety agency approvals including UL60950-1, C-UL(CSA60950-1), and EN62368-1, along with EMI compliance to FCC-B, CISPR22-B, and EN55011-B standards. It comes with a 5-year warranty.</p>