TE Connectivity

<p>The TE Connectivity AMP Ultra-Fast 2-520128-2 is a fully insulated flag-style quick disconnect receptacle designed for 18-22 AWG wire. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, making it compatible with standard 0.250" series male tabs.</p><p>&nbsp;</p><p>This receptacle uses a crimp termination method and is made from tin-plated brass for good conductivity and corrosion resistance. The housing is rated UL 94V-2 for flammability, and the part is RoHS/ELV compliant.</p><p>&nbsp;</p><p>The flag receptacle style allows for right-angle wire exit, enabling space-saving connections in tight areas. The fully insulated design provides protection against short circuits. Supplied in strip packaging for automated or manual crimping.</p>

<p>This SMA connector from TE Connectivity is a 50 Ohm right angle jack with a female socket. Designed for through-hole PCB mounting, it features a threaded fastening mechanism and solder contacts. The center contact is made of beryllium copper, and the housing is gold plated. With a maximum frequency of 3 GHz, it is suitable for RF applications requiring reliable signal integrity. The connector has a single port and uses solder for both contact and shield termination.</p>

<p>The TE Connectivity 826629-3 is an AMPMODU II breakaway pin header designed for board-to-board or cable-to-board connections. It features 3 positions in a single row with a standard 2.54mm (0.100") pitch. The connector is unshrouded with a push-pull fastening type and uses square male pins made of brass with a tin contact finish.</p><p>&nbsp;</p><p>This through-hole header has a green PBT insulator rated UL94 V-0 for flammability. The overall contact length is 0.500" (12.70mm) with a mating pin length of 6.70mm (0.264"). It is rated for 5A current and operates over a temperature range of -65°C to 105°C.</p><p>&nbsp;</p><p>The breakaway design allows the header to be cut to the desired number of positions, offering flexibility in prototyping and production. It is suitable for a wide range of general-purpose interconnection applications.</p>

<p>This rectangular connector housing from TE Connectivity is a 2-position receptacle designed for wire-to-wire or wire-to-board applications. The housing accommodates female socket contacts and features a 3.96mm (0.156") contact pitch for reliable spacing. It is configured for free hanging (in-line) mounting and uses crimp termination for secure wire attachment. The housing body is green, providing easy visual identification during assembly. As a housing only, it requires the appropriate crimp contacts and insertion tooling for complete connector assembly.</p><p>&nbsp;</p><p>This component is part of a family of rectangular connectors commonly used in power and signal applications. The single-row design with 2 positions is suited for low-density connections where space allows a larger pitch. The 3.96mm pitch provides robust current handling capability when paired with suitable contacts.</p><p>&nbsp;</p><p>The housing is RoHS3 compliant and has an MSL rating of 1 (unlimited floor life) for moisture sensitivity. REACH status is unaffected, making this part suitable for use in products sold globally,</p>

<p>The TE Connectivity 280371-1 is a 4-position, single-row, through-hole header with a 2.54mm pitch. It features male pin contacts made of brass with a tin finish (3.00µm thickness). The header is shrouded with a 3-wall design and includes a detent lock fastening type for secure mating. It is rated for 3A current and 40V voltage, with an operating temperature range of -40°C to 80°C. The insulation is black thermoplastic rated UL94 V-0. This header is suitable for board-to-board or cable applications. It is packaged in bags of 1000 pieces.</p>

<p>The TE Connectivity 1-338068-2 is a 12-position female receptacle connector designed for board-to-board or cable-to-board applications. It features a 2-row (2.54mm row spacing) layout with all positions loaded, employing forked tin contacts for reliable electrical connections.</p><p>&nbsp;</p><p>Key specifications include a 2.54mm contact pitch, 100VDC voltage rating, and an operating temperature range of -40°C to 105°C. The connector uses a friction lock mechanism to secure mating, and the housing is a red PBT polyester with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This component is provided in tape &amp; reel packaging with a standard quantity of 2500 per reel, suitable for automated assembly. The contact length is 3.10mm and insulation height is 4.00mm. The connector supports solder termination with kinked pins for improved retention.</p>

<p>The TE Connectivity 1-794606-1 is a stamped socket contact designed for use in rectangular connector systems. It accommodates 20-24 AWG wire and features a crimp termination for secure, reliable connections. The contact is finished with 15.0µin (0.38µm) of gold plating, providing excellent corrosion resistance and low contact resistance.</p><p>&nbsp;</p><p>This socket contact is suitable for a wide range of interconnect applications where a durable, high-performance connection is required. The stamped construction ensures consistent quality and cost-effectiveness for volume production. The part is RoHS3 compliant and REACH unaffected, meeting current environmental standards.</p>

<p>The TE Connectivity 1-1734839-0 is a 10-position FPC (Flexible Printed Circuit) connector designed for reliable high-density interconnections. It features a 0.50mm pitch and uses a top contact configuration, making it suitable for applications requiring a low-profile, right-angle connection on the PCB.</p><p>&nbsp;</p><p>The connector employs a Zero Insertion Force (ZIF) mechanism with a slide lock, simplifying cable insertion and ensuring secure retention. Contacts are made of phosphor bronze with a gold finish, providing excellent conductivity and durability. The housing and actuator are constructed from thermoplastic material with a UL94 V-0 flammability rating, supporting safety in a variety of environments.</p><p>&nbsp;</p><p>This component is rated for 250V and an operating temperature range of -20°C to 85°C. It is designed for surface mount assembly in a right-angle orientation and includes a solder retention feature for improved reliability during soldering and use. The recommended FPC thickness is 0.30mm with a tapered cable end.</p>

<p>The TE Connectivity 170362-1 is a stamped brass socket contact designed for multi-purpose connector applications. It accommodates 18 to 22 AWG wire and features a tin-plated finish for corrosion resistance and reliable conductivity. The contact uses a crimp termination method, ensuring a secure mechanical and electrical connection when used with compatible crimping tools.</p><p>&nbsp;</p><p>This socket contact is intended for use in a wide range of connector housings and systems, particularly those requiring a rugged and repeatable interconnect solution. The stamped construction provides cost-effective performance for volume production. The tin plating is suitable for many environments and is compliant with RoHS and REACH regulations (unverified).</p><p>&nbsp;</p><p>With an MSL rating of 1 (unlimited floor life), the part is moisture-insensitive and easy to handle during assembly. The contact is available in tape and reel packaging, as indicated by associated DigiKey part numbers A100475TR-ND and A100475CT-ND, supporting automated placement.</p>

<p>TE Connectivity 142270-3 is a 2 position (1x2) open top shunt with a 2.54mm (0.100") pitch, rated for 3A continuous current. The female sockets accept standard 0.025" square pins. The shunt is designed for through hole mounting with solder termination, providing reliable mechanical and electrical connection. The housing is made of black polybutylene terephthalate (PBT) glass filled material, offering high mechanical strength and a UL94 V-0 flammability rating. Contact finish is Tin with a thickness of 3.00µm (118.1µin). This shunt is suitable for jumper configuration applications in rectangular connector systems. It is listed as RoHS3 compliant and REACH unaffected (unverified).</p>

<p>The 826629-2 is a 2-position, single-row, unshrouded breakaway pin header from TE Connectivity's AMPMODU II series. It features a 2.54mm (0.100") pitch and male square pins with brass contacts. The contact finish is tin per existing database records, though a product change notification (PCN E-14-002835) indicates a change to palladium nickel plus gold flash for certain date codes.</p><p>&nbsp;</p><p>This header is designed for through-hole soldering with a push-pull fastening type. The green PBT insulator has a UL94 V-0 flammability rating. The mating contact length is 6.70mm (0.264") and the overall contact length is 0.500" (12.70mm). It is rated for 5A current and operates from -65°C to 105°C.</p><p>&nbsp;</p><p>Typical applications include board-to-board and cable-to-board connections where a low-profile, unshrouded header is required. The breakaway design allows the header to be cut to the desired number of positions.</p>

<p>The TE Connectivity 926884-3 is a socket contact designed for rectangular connectors. It accepts wire gauges from 18 to 24 AWG and is terminated by crimping. The contact has a tin finish with a thickness of 2.00 µm (78.7 µin).</p><p>&nbsp;</p><p>This contact is suitable for use in a variety of applications requiring reliable connections within rectangular connector housings. The crimp termination ensures a secure mechanical and electrical connection. The tin finish provides corrosion resistance and good solderability.</p><p>&nbsp;</p><p>The contact is available in loose piece form or on tape and reel for automated assembly. Cross-referenced part numbers include A122185TR-ND (tape and reel) and A122185CT-ND (cut tape).</p><p>&nbsp;</p><p>According to the manufacturer's datasheet, this part number is obsolete and has been superseded by 350851-7.</p>

<p>The TE Connectivity 1909763-1 is a UMCC (U.FL) standard coaxial connector designed for RF applications. It features a jack, male pin interface with a snap-on fastening mechanism, ensuring secure mating. The connector offers a characteristic impedance of 50 Ohms and supports frequencies up to 6 GHz, making it suitable for various wireless communication modules.</p><p>&nbsp;</p><p>This connector is surface mountable (SMD) with solder termination for both the center contact and shield. The center contact is made of copper alloy, and the housing is colored ivory. It is designed for single-port configurations.</p><p>&nbsp;</p><p>The 1909763-1 is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited) for moisture sensitivity. It is intended for use in compact RF assemblies such as Wi-Fi, Bluetooth, and GPS modules.</p><p>&nbsp;</p><p>Packaging is typically in tape and reel for automated assembly. Cross-reference part numbers include A118077TR-ND, A118077CT-ND, and A118077DKR-ND from Digi-Key.</p>

<p>The TE Connectivity 282104-1 is a 2-position receptacle housing from the AMP SUPERSEAL 1.5 series, designed for automotive and industrial applications requiring reliable connections in harsh environments. This free hanging (in-line) housing accepts tab contacts with crimp termination and features a locking ramp fastening system for secure mating.</p><p>&nbsp;</p><p>Key specifications include a 6.00mm pitch, single row configuration, and an operating temperature range of -40°C to 125°C. The housing is molded from black PA66-GF material with a UL94 V-2 flammability rating and complies with IEC 60335-1. The part weighs 3.72g and is designed for use with TE Connectivity AMP SUPERSEAL 1.5 contacts.</p><p>&nbsp;</p><p>This housing is part of a family that includes alternate color variants (282104-2 gray, 282104-3 green) and is commonly used in automotive wiring harnesses, engine control units, and other demanding applications where vibration resistance and environmental sealing are required.</p>

<p>The TE Connectivity 3-520132-2 is an Ultra-Fast 250 series flag receptacle designed for quick disconnect applications. It accepts 14-16 AWG stranded wire with a maximum insulation diameter of 4.7 mm. The terminal features a 0.250" (6.35 mm) mating tab width and 0.032" (0.81 mm) thickness, with a tin plated brass contact for reliable conductivity.</p><p>&nbsp;</p><p>This fully insulated receptacle is rated for 600V maximum and operates up to 105°C. It is UL listed (E66717) and CSA certified (LR7189), with UL 94V-2 flammability rating. The right-angle flag orientation allows for space-saving in-line mounting.</p><p>&nbsp;</p><p>Packaged in reels of 2100 pieces, this terminal is suitable for power distribution, appliance wiring, and automotive harnesses. The crimp termination ensures secure wire attachment.</p>

<p>The 163087-9 is a stamped socket contact manufactured by TE Connectivity. It is designed for wire gauges 20-24 AWG and features a crimp termination style. The contact is made of brass with a tin plating finish of 78.7µin (2.00µm). This socket contact is suitable for use in multipurpose connector systems requiring reliable electrical connections. The tin finish provides good corrosion resistance and solderability. The crimp termination ensures a secure mechanical and electrical connection when used with the appropriate crimping tool. This component is classified as RoHS3 compliant and REACH unaffected, though these statuses are unverified.</p>

<p>The TE Connectivity 163083-8 is a stamped brass socket contact for 16-18 AWG wires. It features a tin-plated finish (2.00 µm) for corrosion resistance and uses a crimp termination style. This contact is suitable for multi-purpose connector systems, often used in wire-to-wire and wire-to-board applications. Its stamped construction provides a cost-effective and reliable interconnect solution.</p><p>&nbsp;</p><p>Mating with corresponding pin contacts is required to form a complete connection. The brass material ensures good conductivity, while the tin finish facilitates soldering if needed. For best results, use a properly calibrated crimp tool according to the wire gauge to achieve a gas-tight connection. This design is common in industrial and automotive wiring harnesses where consistent performance is required.</p>

<p>The TE Connectivity 60573-1 is a standard female quick connect receptacle designed for 20-24 AWG wire. It is non-insulated and features a 0.187" (4.75mm) tab width with a tab length of 0.250" (6.35mm) and tab thickness of 0.020" (0.51mm). The overall length is 14.99mm.</p><p>&nbsp;</p><p>The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. Termination is via crimp, suitable for automated or manual crimping processes. The free hanging (in-line) mounting allows for flexible wiring harness assembly.</p><p>&nbsp;</p><p>This connector is commonly used in automotive, appliance, and industrial applications where reliable quick disconnect connections are required. The 20-24 AWG wire range accommodates a variety of signal and low-power circuits.</p>

<p>The TE Connectivity 163300-6 is a socket contact designed for use in rectangular connector housings. It accommodates wire gauges from 17 to 20 AWG, providing a secure crimp termination. The contact features a tin finish for reliable conductivity and corrosion resistance. This socket contact is suitable for various wire-to-wire and wire-to-board applications in industrial and automotive environments.</p>

<p>The TE Connectivity 40811 is a non-insulated ring terminal designed for 16-20 AWG wire with a #6 stud size. It uses a crimp termination for secure connections and features a brass contact with tin plating for corrosion resistance. The terminal measures 0.51mm in thickness, 6.60mm in width, and 10.16mm in length. It is free hanging (in-line) mounting, suitable for use in confined spaces. This terminal is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is commonly used in wire harnesses, power distribution, and general electrical applications.</p>

<p>The TE Connectivity 163081-8 is a signal stamped crimp pin contact designed for use with 16-18 AWG wire. The contact is made of brass with a tin finish, providing reliable conductivity and corrosion resistance. The contact termination is crimp style, ensuring a secure mechanical and electrical connection.</p><p>&nbsp;</p><p>This pin contact is part of TE Connectivity's multi-purpose contact family, suitable for a wide range of connector applications. The tin plating thickness is 5.00 µm (196.9 µin), offering good solderability and durability. The contact is rated for signal-level applications and is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The TE Connectivity AMPLIVAR 62295-1 is an uninsulated pigtail splice designed for terminating magnet wire. It accommodates wire sizes from 12 to 10 AWG (3.46 to 6 mm², 7000 to 12000 CMA) and can splice up to three wires simultaneously. The open barrel design features a serrated mating area with 7 serrations for secure crimp termination.</p><p>&nbsp;</p><p>Constructed from brass with a tin plating, this splice offers reliable electrical performance and corrosion resistance. It is rated for an operating voltage of 250 V and can withstand temperatures from -65 to 150 °C. The splice has an overall length of 5.72 mm and a crimp width of 6.35 mm.</p><p>&nbsp;</p><p>This component is supplied in strip packaging with 20,000 pieces per reel, suitable for automated crimping processes. It is EU RoHS compliant and does not contain REACH SVHC substances. The 62295-1 is a non-sealable, non-heavy-duty splice without wire insulation support.</p>

<p>This TE Connectivity FASTIN-FASTON 250 quick disconnect receptacle (part number 5-160526-7) is a non-insulated female terminal designed for 15.5-20 AWG wire. It features a 0.250" (6.35mm) mating tab width and 0.032" (0.81mm) tab thickness, making it compatible with standard 0.250" male tabs. The terminal uses an F-crimp barrel type with wire insulation support, and is made from tin-plated brass for reliable conductivity and corrosion resistance. The product is packaged in strip/reel format with a quantity of 5000 pieces. Operating temperature range is -40 to 110 °C. It is RoHS and REACH compliant. Ideal for power and signal connections in automotive, industrial, and appliance applications where a dependable quick-disconnect interface is required.</p>

<p>The TE Connectivity 66507-3 is a stamped pin contact from the AMPLIMITE HDP-20 (Crimp Snap) series, designed for reliable wire-to-connector termination in signal applications.</p><p>&nbsp;</p><p>This contact accommodates wire gauges from 24 to 28 AWG (0.08-0.20 mm²) with an insulation diameter range of 0.76 to 1.02 mm. It features a brass base material with a mating area plating of gold flash over palladium nickel or gold (30) over nickel, providing a robust and corrosion-resistant connection.</p><p>&nbsp;</p><p>The crimp termination method ensures secure mechanical and electrical bonding, and the contact includes insulation support. Contact retention is achieved via a crimp snap-in mechanism, allowing for easy insertion and removal from the housing.</p>

<p>The TE Connectivity 280384-2 is an 8-position shrouded header from the AMPMODU MOD II series. It features 2 rows of male pin contacts with a 2.54mm pitch and 2.54mm row spacing. The header is shrouded on three sides with a detent lock fastening system, ensuring secure mating. The contacts are made of brass with a 15µin tin finish, rated for 3A current and 40V voltage. The through hole mounting with solder termination makes it suitable for board-to-board or cable connections. The insulation is black thermoplastic with a UL94 V-0 flammability rating, and the operating temperature range is -40°C to 80°C. Overall contact length is 14.30mm with an insulation height of 12.60mm.</p>

<p>The TE Connectivity 316292-1 is a cluster pin receptacle designed for magnetic wire connections. It uses a crimp termination style and accepts 13-18 AWG wire gauge. The terminal features serrated termination to enhance grip and electrical contact. This component is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited). It is suitable for use in various electrical interconnection applications where reliable crimp connections are required.</p>

<p>The TE Connectivity 2-100103-0 is a strain relief accessory for the AMP-LATCH series of rectangular connectors. It is designed for use with connectors having 20 positions, providing cable strain relief to protect the connector and wiring. This accessory is typically installed onto the connector housing to secure the cable and reduce stress on the termination points. It is suitable for various applications requiring reliable cable management in electronic assemblies.</p>

<p>The TE Connectivity AMPMODU HE14 281695-4 is a 4-position, single row, shrouded header designed for wire-to-board interconnections. It features a 2.54mm (0.100") pitch, through hole mounting, and solder termination. The header is shrouded with 2 walls for contact protection and includes a friction lock fastening mechanism for secure mating.</p><p>&nbsp;</p><p>The contacts are made of phosphor bronze with tin plating on the mating area and tin-lead plating on the solder tails. The contact post size is 0.64mm (0.025") square, with a mating post length of 6.75mm (0.266") and a termination post length of 2.9mm (0.114"). The overall contact length is 12.50mm (0.492"). The insulation is blue high-temperature thermoplastic, rated UL94 V-0, with an insulation height of 11.40mm (0.449").</p><p>&nbsp;</p><p>This header is rated for 3A continuous current and operates over a temperature range of -55°C to 105°C. It is approved to CSA LR7189 and UL E28476 standards. The part is packaged in bags of 2000 pieces. The series is part of the AMPMODU HE14 family, commonly used in industrial and consumer electronics applications.</p>

<p>The TE Connectivity 3-794037-1 is a wire to board terminal designed for use with 10-12 AWG wire. It features a through board mounting style and a phosphor bronze contact material with a tin finish. The terminal has an overall length of 7.49 mm (0.295 inches), an insulation diameter of 5.08 mm (0.200 inches), and accepts hole diameters of 3.18 mm (0.125 inches) and 3.76 mm (0.148 inches). This terminal is suitable for applications requiring reliable wire to board connections in industrial, automotive, or consumer electronics. Its tin finish provides good solderability and corrosion resistance. The through board design allows for stable mounting on PCBs. The part is RoHS compliant and has an MSL of Level 1, indicating unlimited floor life.</p>

<p>The TE Connectivity 925324-2 is a connector housing designed for use with 0.250" (6.35mm) quick disconnect terminals. It is a single-position female receptacle with a natural color, typically made of nylon or similar insulating material. The housing features a free hanging (in-line) mounting style, allowing for easy installation in wire harnesses without panel mounting.</p><p>&nbsp;</p><p>This housing is specifically intended for 0.250" quick connect terminals, providing a secure enclosure for the terminal and wire connection. The 1-position design is suitable for single-wire applications where a quick disconnect interface is required. The natural color is standard for unmodified housing materials.</p><p>&nbsp;</p><p>No additional electrical ratings or specifications are provided. The housing is RoHS3 compliant (unverified) and REACH unaffected (unverified). For detailed mechanical and thermal properties, refer to the manufacturer's documentation.</p>

<p>The TE Connectivity 163088-1 is a crimp socket contact for 20-24 AWG wire. It is manufactured from stamped brass and plated with tin to a thickness of 78.7µin (2.00µm). The socket contact is terminated via crimping, making it suitable for use in a variety of connector housings. The component is classified as RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). This contact is part of TE Connectivity's multi-purpose contact line, often used in wire-to-wire or wire-to-board connector systems. The crimp termination ensures reliable connections in demanding environments.</p>

<p>The TE Connectivity 280372-1 is a rectangular connector header designed for board-to-board or cable applications. It features 6 positions in a single row with a 2.54mm pitch, making it suitable for compact designs. The connector is shrouded with a 3-wall design and uses a detent lock fastening type for secure mating. Contacts are made of brass with a tin finish (3.00µm thickness) and are male pin type. The header is rated for 3A current and 40V voltage, with an operating temperature range of -40°C to 80°C. It is through hole mounted with solder termination. The insulation is black thermoplastic with UL94 V-0 flammability rating. This connector is commonly used in various electronic assemblies requiring reliable interconnections.</p>