Harting

<p>The Harting 09670155601 is a D-Sub connector housing designed for use with male crimp contacts. It has 15 positions arranged in 2 rows and uses shell size 2 (DA, A). The housing is constructed with a steel shell that has a tin-plated finish and includes grounding indents for improved electrical performance.</p><p>&nbsp;</p><p>This connector housing is designed for panel mount installation. The panel cut out dimensions are 39.2 mm in length and 33.3 mm in width. The flange feature is housing/shell unthreaded. The housing accepts crimp-style contacts which are ordered separately.</p><p>&nbsp;</p><p>This part is RoHS3 compliant and has an MSL of 1 (unlimited). It is also REACH unaffected. The housing is suitable for applications requiring a reliable D-Sub connection in a panel-mount configuration.</p>

<p>The Harting 09195506323 is a low-profile male header from the SEK series, designed for board-to-cable/wire applications. It provides 50 positions arranged in 2 rows with a standard 2.54mm pitch and 2.54mm row spacing. The connector features a shrouded 4-wall design with a latch holder fastening system, ensuring secure mating with compatible female connectors. Contact pins are square-shaped male pins made from copper alloy with a mating pin length of 6.10mm and a solder pin length of 2.9mm for through-hole right-angle mounting. The insulation body is beige, molded from glass-filled PCT material rated UL94 V-0 for flammability. The header includes a keying slot feature for polarization. Operating temperature range is -55°C to +125°C.</p>

<p>The Harting 09032967824 is a DIN 41612 Type C female receptacle connector designed for motherboard to daughtercard mezzanine connections. It features 96 contacts arranged in 3 rows (a, b, c) with a 2.54mm pitch on both mating and termination sides. The connector is rated for 2A continuous current (measured at 20°C, with derating curve applicable), with a contact resistance of ≤20 mΩ and insulation resistance &gt;10^12 Ω. It can withstand a test voltage of 1 kV and operates over a temperature range of -55 to +125°C.</p><p>&nbsp;</p><p>Mechanically, the connector has an insertion force of ≤90 N and withdrawal force ≤60 N, supporting at least 50 mating cycles. The housing is made of glass-fibre filled thermoplastic with a pebble grey color (RAL 7032), and contacts are copper alloy with noble metal plating on the mating side and tin over nickel on the termination side. The connector is through-hole mounted with wave soldering termination and has a termination length of 2.9 mm. It includes a fixing flange for secure PCB attachment and coding with loss of contacts.</p><p>&nbsp;</p><p>This connector meets IEC 60603-2 standards with performance level 3 and has a flammability rating of V-0. It is also compliant with EN 45545-2 R26 fire protection standard. RoHS and REACH compliant.</p>

<p>The Harting 09185266813 is a SEK-18 series female receptacle connector designed for IDC termination to 26-28 AWG ribbon cable. It features 26 positions in 2 rows with a 2.54mm pitch and row spacing. The connector is free hanging (in-line) and includes a strain relief clamp, polarizing key, and feed-through design. Electrical ratings include 2.5A current, 20 mΩ contact resistance, and &gt;10^9 Ω insulation resistance. The operating temperature range is -55 to +125 °C. Contacts are copper alloy with gold over nickel plating on the mating side and tin over nickel on the termination side. The housing is gray PBT thermoplastic with UL 94 V-0 flammability rating. This connector meets performance level 2 per IEC 60603-13 and is RoHS and REACH compliant.</p>

<p>The Harting 09140009901 is a coding pin accessory for the Han-Modular connector series. It features an M3 thread and is constructed from steel with a zinc plated finish for durability and corrosion resistance.</p><p>&nbsp;</p><p>This coding pin is used to ensure correct mating of Han-Modular modules, preventing mismating in heavy-duty connector applications. It is a key component for configuring connector layouts in industrial environments.</p><p>&nbsp;</p><p>The part has a net weight of 4.116 g and is supplied in a packaging size of 50 pieces. It is manufactured in Germany and complies with RoHS with exemption, REACH, ELV, and China RoHS regulations.</p>

<p>The Harting 09140010421 is a Han-Modular ECO hood designed for heavy duty connector applications. It features a top entry configuration with an integrated cable gland for cable diameters from 6 to 13 mm. The housing is made of polycarbonate (PC) in RAL 7032 pebble grey, with a polyamide cable gland and NBR seal. It provides IP65 ingress protection against dust and water jets. The locking mechanism uses snap-in latches with a side latch lock on the hood. The operating temperature range is -40°C to +85°C, and it is rated for at least 500 mating cycles. The hood meets UL94 V-0 flammability class and is compliant with RoHS, REACH, and California Proposition 65. It is suitable for industrial environments requiring reliable and durable connector housings.</p>

<p>The Harting 09031326921 is a DIN 41612 Type C male header connector designed for backplane and motherboard-to-daughtercard applications. It offers 96 positions with 32 positions loaded across 3 rows, using a standard 2.54mm pitch. The connector features a through hole right angle mounting style with solder termination, making it suitable for PCB applications where space is constrained.</p><p>&nbsp;</p><p>This connector is rated for a performance level of 2 per IEC 60603-2. Electrical specifications from related datasheets indicate a rated current of 2A, insulation resistance greater than 10^12 ohms, and contact resistance of 20 milliohms or less. The operating temperature range is -55°C to +125°C, with a minimum of 500 mating cycles.</p><p>&nbsp;</p><p>The connector is RoHS compliant and REACH unaffected. It is constructed with a thermoplastic resin insulator and meets UL 94 V-0 flammability rating. The part is designed for reliable signal transmission in industrial and commercial electronic systems.</p>

<p>The Harting 09300240381 is a Han B base panel designed for central lever locking systems. It is a bulkhead mounted housing with bottom entry style, suitable for industrial connector applications. The housing is made of aluminum die-cast with a powder-coated finish in RAL 7037 (dust grey). It provides IP65 protection against dust and water ingress, making it suitable for harsh environments.</p><p>&nbsp;</p><p>The base panel is size 24B and has dimensions of 140.00mm length, 43.40mm width, and 28.90mm height. It can withstand operating temperatures from -40°C to 125°C and is rated for at least 500 mating cycles. The seal material is NBR. The product is RoHS compliant, REACH unaffected, and meets ELV and China RoHS requirements. It also carries CE and DNV GL approvals and complies with railway fire protection standard EN 45545-2 (R1 and R7, hazard levels 1-3).</p><p>&nbsp;</p><p>This base panel is intended for use with Han B hoods and connectors. It is a passive component that provides mechanical mounting and environmental sealing. No electrical ratings are specified as it is a housing only. The product weighs 107.5g and is manufactured in Germany.</p>

<p>The 20820000005 is a HA-VIS PRELINK IDC terminal module manufactured by Harting. This component is classified as a terminal block and falls under the keystone connector accessories category.</p><p>&nbsp;</p><p>As a terminal block, it provides a secure and reliable connection point for wiring within keystone connector systems. The IDC (Insulation Displacement Connector) design allows for quick wire termination without stripping.</p><p>&nbsp;</p><p>This module is designed for use in structured cabling and industrial networking applications where robust and repeatable connections are required. It is part of the HA-VIS PRELINK series, known for its ease of installation and high reliability.</p>

<p>The Harting 09683535613 is a D-Sub receptacle connector with 25 female socket contacts arranged in 2 rows. It features a shell size of 3 (DB, B) and a steel shell. The connector is designed for through-hole, right angle mounting with solder termination, making it suitable for PCB applications where space constraints require a right angle orientation.</p><p>&nbsp;</p><p>Electrical specifications include a current rating of 6.5 A per contact. The contacts are signal type with a gold or gold-palladium finish of 0.76 µm thickness. The connector includes a board lock feature for secure attachment to the PCB and a flange feature with mating side female screwlock (4-40) for reliable mating.</p><p>&nbsp;</p><p>The insulator material has a flammability rating of UL94 V-0. The backset spacing is 8.08 mm. This connector is part of Harting's D-Sub series designed for industrial and commercial applications requiring robust and reliable interconnections.</p>

<p>The Harting 09030006225 is a turned female contact designed for DIN 41612 Type M-flat and har-modular® M-flat modules. It is rated for a current of ≤40 A and supports ≥500 mating cycles with an insertion force of ≤10 N and withdrawal force of ≥1.6 N. The contact is made of copper alloy with a noble metal over nickel plating on the mating side. Termination is via solder. This contact is suitable for motherboard-to-daughtercard, mezzanine, and PCB-to-cable connections. It is RoHS compliant with exemption 6(c) and contains lead as an SVHC under REACH. The part is manufactured in Hungary and packaged in quantities of 100 pieces.</p>

<p>This Harting D-Sub connector (part number 09 65 261 7712) is a straight-through, male-pin plug with 15 contacts arranged in two rows on a 2.84 mm row spacing. It is designed for through-hole wave soldering termination into a PCB with a minimum thickness of 1.6 mm. The connector carries a rated current of 6.5 A and features a copper alloy contact material with a noble metal surface over nickel for reliable signal integrity. The plated steel shell provides EMI shielding and mechanical strength, while integrated board locks secure the connector to the PCB. The flange uses 4-40 UNC threads for mating with a female screw lock; tightening torque for the screw lock is limited to 0.6 Nm. The connector is rated for performance level 3 and can withstand at least 50 mating cycles. The insert is black thermoplastic resin, glass-fibre filled (PBTP), rated UL94 V-0. The operating temperature range is -55 to +125 °C. Clearance and creepage distances are both ≥1 mm, and the insulation resistance exceeds 10¹⁰ Ω with a contact resistance of ≤10 mΩ. The connector supports mezzanine (motherboard-to-daughtercard) connections and is not hot-pluggable.</p>

<p>The Harting 19200030420 is a Han A series hood designed for heavy-duty connector applications. It features a top entry configuration with a single M20 cable entry and a single locking lever for secure closure. The housing is made of polycarbonate (PC) in RAL 7032 pebble grey, providing a robust and lightweight enclosure.</p><p>&nbsp;</p><p>This hood is rated IP44 for protection against solid objects and splashing water, and can achieve IP65/IP67 when used with a seal screw. It operates over a temperature range of -40°C to +125°C and meets UL94 V-0 flammability requirements. The component is RoHS compliant and free of REACH Annex XVII, Annex XIV, and SVHC substances, as well as California Proposition 65 substances.</p><p>&nbsp;</p><p>Designed for industrial applications, this hood is part of the Han A series and is suitable for use in standard environments. It is approved to UL 1977, CSA C22.2 No. 182.3, CE, and DNV GL standards, and also meets EN 45545-2 fire protection requirements for railway vehicles. The packaging quantity is 10 pieces.</p>

<p>This is a HARTING Han 3A hood top entry connector housing with M20 cable entry. It is part of the Han A series and designed for heavy-duty industrial applications. The housing is made of polycarbonate (PC) in gray RAL 7032 color.</p><p>&nbsp;</p><p>Key specifications include IP44 protection, upgradable to IP65/IP67 with a seal screw, operating temperature range -40°C to 125°C, and UL 94 V-0 flammability rating. The seal is NBR, and locking is via a single locking lever.</p><p>&nbsp;</p><p>The hood accepts a single M20 cable entry and is intended for use with Han-Brid inserts. It is RoHS, REACH, and ELV compliant. Weight 12g, dimensions 26.5x26.5x60mm. Packaged in quantities of 10.</p>

<p>The HARTING 09300160441 is a Han B series hood designed for heavy-duty industrial connectors. It features a top entry configuration with a single PG29 cable entry, suitable for size 16B housings. The hood is constructed from aluminum die-cast with a powder-coated finish in RAL 7037 gray. It offers ingress protection ratings of IP65, IP66, and IP67, making it suitable for demanding environments. The operating temperature range is -40°C to 125°C, with a minimum of 500 mating cycles. Compliance includes UL 1977, CSA C22.2 No. 182.3, and EN 45545-2 for railway fire protection. The hood is RoHS, REACH, and ELV compliant. It weighs 196 g and is manufactured in Germany.</p>