ERP Power, LLC

<p>The ESS010W-0500-12 is a constant current LED driver from ERP Power, LLC, part of the ESS series. It delivers 500mA output current with an output voltage range of 6 to 12 Vdc, providing up to 6W of power. The driver accepts a wide input voltage range of 120 to 277 Vac.</p><p>&nbsp;</p><p>This driver features Tri-Mode Dimming™, supporting TRIAC (forward-phase), ELV (reverse-phase), and 0-10V analog dimming methods, with a dimming range of 1-100%. It achieves up to 87% typical efficiency and has a power factor greater than 0.9 with total harmonic distortion less than 20%. Protections include over-current, over-temperature, and short-circuit with auto recovery.</p><p>&nbsp;</p><p>The driver is housed in a compact plastic case measuring 83.8 x 39.9 x 25.1 mm (3.30 x 1.57 x 0.99 inches) with wire leads termination. It is IP64 rated for protection against dust and water splashes. The maximum case hot spot temperature is 90°C, and the rated lifetime is 50,000 hours at 70°C case temperature. It is a Class 2 power supply with worldwide safety approvals including UL, CSA, ENEC, CE, and others.</p>

<p>The ESS010W-0350-24 is a constant current LED driver from ERP Power, LLC, part of the ESS series. It delivers a 350mA output current over a 14-24V voltage range, with a maximum output power of 40W. The driver operates from a 120VAC input and achieves up to 87% efficiency.</p><p>&nbsp;</p><p>This driver supports Tri-Mode Dimming including TRIAC (forward-phase), ELV (reverse-phase), and 0-10V analog dimming, with a dimming range of 1-100%. It includes protections for over-current (OCP), over-temperature (OTP), and short-circuit (SCP) with auto recovery.</p><p>&nbsp;</p><p>The unit is housed in an ESS plastic case measuring 83.8mm x 39.9mm x 25.1mm and features wire leads for termination. It is rated IP64 for environmental protection and carries approvals including cUL, UL, cRUcs, FC, CE, and CB.</p>

<p>The ESPT050W-1200-42-Z1 is a constant current LED driver manufactured by ERP Power, LLC. It operates as an AC DC converter with a nominal input voltage of 120 VAC and delivers a constant output current of 1.2 A over a voltage range of 28 V to 42 V, providing up to 50 W of power. The driver achieves an efficiency of 87% and supports dimming via analog, ELV, and Triac methods.</p><p>&nbsp;</p><p>The unit is protected against overcurrent (OCP), overtemperature (OTP), and short circuits (SCP). It is rated IP64 for ingress protection, making it suitable for indoor or outdoor use in appropriate enclosures. The driver has a single output and is terminated with wire leads.</p><p>&nbsp;</p><p>Mechanically, the driver measures 84.8 mm in length, 59.9 mm in width, and 30.0 mm in height. It carries multiple safety approvals including cRUcs, SA, ENEC, FC, CE, CCC, CB, KC, NEMKO, UL, and CSA. The product is listed as RoHS3 compliant and REACH unaffected, with an MSL classification of 1 (unlimited).</p><p>&nbsp;</p><p>This LED driver is designed for constant current LED applications requiring a 50 W power level and flexible dimming control.</p>

<p>This is a constant current LED driver from ERP Power's DAL series. It features DALI dimming with a 1-100% range and is designed for indoor LED lighting applications. The driver accepts a universal input voltage of 90-305 VAC and provides a programmable output current adjustable from 425 to 850 mA.</p><p>&nbsp;</p><p>Electrical specifications include a typical efficiency of 90%, power factor &gt;0.9, and total harmonic distortion &lt;20%. The output voltage range is 38-56 Vdc with a maximum open circuit voltage of 60 Vdc. The driver has a startup time of 300 ms typical and operates over a temperature range of -10°C to 40°C with a maximum case temperature of 90°C.</p><p>&nbsp;</p><p>The driver is housed in an aluminum case with terminal block connections and is rated IP20 for indoor use. It measures 132.2mm x 30.6mm x 20.7mm. Safety approvals include CB, CE, cULus, ENEC, and FCC. It is Class II reinforced/double insulation with a Class 2 output.</p><p>&nbsp;</p><p>This driver is suitable for commercial and residential LED lighting fixtures requiring DALI control. The programmable output allows flexibility for different LED loads within the specified current and voltage ranges.</p>

<p>The ERP Power ESSV040W-0900-42 is a constant current LED driver from the ESSV series, designed for a wide range of commercial and residential lighting applications. It accepts a universal input voltage range of 120 to 277 VAC and delivers a regulated 900mA output current with a power rating of 38W (37.8W per datasheet). The output voltage range is 20 to 42 VDC, making it suitable for various LED loads.</p><p>&nbsp;</p><p>The driver features Tri-Mode Dimming, supporting 0-10V analog, TRIAC (forward-phase), and ELV (reverse-phase) dimming methods, with a dimming range from 1% to 100% of output current. It achieves up to 87% typical efficiency and maintains a power factor greater than 0.9 with total harmonic distortion less than 20%. Protection features include overcurrent protection (OCP), over-temperature protection (OTP) with auto recovery, and short-circuit protection (SCP).</p><p>&nbsp;</p><p>Packaged in a plastic case with dimensions 83.8mm x 39.9mm x 27.2mm, the driver is IP66 rated for outdoor and damp locations. It has wire leads for termination and is chassis mountable. The driver is UL Class P and Class 2 certified, with a 5VA flammability rating and compliance to FCC Part 15 (Class B at 120 VAC, Class A at 277 VAC) and EN55015. The minimum lifetime is 50,000 hours at 70°C case temperature.</p>

<p>The ERP Power ESPV050W-1200-42-Z1 is a 50W constant current LED driver designed for commercial and residential lighting applications. It accepts an input voltage range of 120 to 277 Vac and provides a constant current output of 1.2A with an output voltage range of 24 to 42 Vdc. The driver achieves up to 87% typical efficiency and features a power factor greater than 0.9 with total harmonic distortion less than 20%.</p><p>&nbsp;</p><p>The driver supports Tri-Mode dimming, compatible with 0-10V analog, TRIAC (forward-phase), and ELV (reverse-phase) dimmers, with a dimming range of 1% to 100%. It includes protections such as over-current, over-temperature, short-circuit, and output open load with auto recovery. The startup time is 300 ms typical.</p><p>&nbsp;</p><p>The ESPV050W-1200-42-Z1 is housed in an IP66-rated plastic case with dimensions 89.0 mm x 60.0 mm x 30.1 mm and features wire leads for termination. It is chassis mountable and has a 5VA flame rating. The maximum case temperature is 90°C, and the driver has a minimum lifetime of 50,000 hours at 70°C case temperature. It complies with FCC Part 15 Class B (120 Vac)/Class A (277 Vac) and EN55015 for EMI, and meets ENERGY STAR, DLC, and CA Title 24 requirements.</p>

<p>The EBR010E-0250-42-CE is a constant current LED driver manufactured by ERP Power, LLC. It operates as an AC-DC converter with a nominal input voltage of 220 VAC and delivers a nominal output current of 250 mA. The driver provides 8 W of output power with an efficiency of 87%.</p><p>&nbsp;</p><p>This driver supports dimming via ELV and Triac controls, making it suitable for a variety of lighting applications. Protection features include overcurrent protection (OCP), overtemperature protection (OTP), and short-circuit protection (SCP). The operating temperature range is -30°C to 90°C.</p><p>&nbsp;</p><p>The unit has an IP20 ingress protection rating and features wire lead terminations. Its dimensions are 2.28 inches in diameter by 1.25 inches in height (57.9 mm x 31.8 mm). The driver is approved by CE and cURus agencies.</p>

<p>The ESPT040E-0900-42 is a constant current LED driver manufactured by ERP Power, LLC. It features an AC-DC converter topology with a single output rated at 900mA. The output voltage range is 28 to 42V, delivering up to 38W of power. Input voltage is 220VAC. Efficiency is rated at 87%. The driver supports analog, ELV, and Triac dimming methods. Protection features include overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection. The unit is enclosed in an IP64-rated housing, suitable for damp environments. Termination is via wire leads. Dimensions are 84.8mm x 59.9mm x 30.0mm. The driver holds multiple safety approvals including cRUcs, SA, ENEC, FC, CE, CCC, CB, KC, NEMKO, UL, and CSA. It is RoHS3 compliant and REACH unaffected. This driver is designed for LED lighting applications requiring constant current regulation.</p>

<p>The ERP Power ESM030W-0900-26 is a constant current LED driver with an AC DC converter topology. It operates from a 120VAC input and delivers a regulated output of 900mA over a 19-26V range, providing up to 23W of power. The driver achieves 87% efficiency and supports dimming via ELV and Triac controls.</p><p>&nbsp;</p><p>Protection features include overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection. The device is rated IP20 and complies with NEMA 410, making it suitable for indoor use. It is approved by cUL, UL, cRUcs, FC, CE, and CB.</p><p>&nbsp;</p><p>Mechanical dimensions are 106.7mm x 60.3mm x 25.2mm (4.20" x 2.37" x 0.99") with wire leads termination. The operating temperature range is -30°C to 90°C. Environmental compliance includes RoHS3, REACH unaffected, and MSL 1.</p>

<p>The EVM090W-2000-42 is a constant current LED driver from ERP Power, LLC. It delivers a regulated output current of 2A with an output voltage range of 30-42V, providing up to 84W of power. The driver accepts a 120VAC input and features an AC-DC converter topology with 89% typical efficiency.</p><p>&nbsp;</p><p>This driver supports both ELV and Triac dimming, making it compatible with a variety of dimmer types. It is designed for reliable operation in harsh environments, with an operating temperature range of -30°C to 90°C. The unit is rated IP20 for indoor use and complies with NEMA 410.</p><p>&nbsp;</p><p>Protection features include overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection. The driver is housed in a compact enclosure measuring 144.0mm x 70.0mm x 40.0mm and terminates with wire leads for easy installation.</p>

<p>This is a constant current LED driver from the ESSV series by ERP Power, delivering 500mA output current with 21W power. It accepts a wide input voltage range of 120 to 277VAC.</p><p>&nbsp;</p><p>Key electrical specs include 87% typical efficiency, power factor &gt;0.9, THD &lt;20%, and startup time 300ms. It supports Tri-Mode dimming: 0-10V analog, reverse-phase (ELV), and forward-phase (TRIAC) with 1-100% dimming range.</p><p>&nbsp;</p><p>The driver is housed in an IP66-rated plastic case with wire leads, dimensions 83.8mm x 39.9mm x 27.2mm. It features protections: OCP, OTP, SCP. UL Class P and 5VA flammability rating. Lifetime 50,000 hours at 70°C case temperature.</p><p>&nbsp;</p><p>Suitable for commercial, residential, and architectural lighting applications. Compliant with FCC, EN55015, ENERGY STAR, DLC, and CA Title 24.</p>

<p>The ESS010W-0500-18 from ERP Power, LLC is a 9W constant current LED driver designed for commercial and residential lighting applications. It operates from a universal input of 120 to 277 VAC and delivers a constant current of 500mA with an output voltage range of 6 to 18 Vdc. The driver achieves up to 87% typical efficiency and features Tri-Mode Dimming, supporting TRIAC (forward-phase), ELV (reverse-phase), and 0-10V analog dimming methods with a dimming range of 1 to 100%.</p><p>&nbsp;</p><p>This LED driver is housed in an IP64-rated ESS plastic case (83.8mm x 39.9mm x 25.1mm) with wire leads for termination, suitable for chassis mounting. It includes built-in protections: over-current (OCP), over-temperature (OTP), and short-circuit (SCP) with auto recovery. The driver complies with FCC Part 15 Class B (120 Vac) and Class A (277 Vac), EN55015, and meets ENERGY STAR, DLC, and CA Title 24 requirements. Rated for 50,000 hours lifetime at 70°C case temperature, with a maximum case hot spot of 90°C.</p>

<p>The ERP Power ESM020W-0440-25-SS-F1B is a constant current LED driver designed for indoor and outdoor lighting applications. It operates from a 120VAC input and delivers a nominal output current of 440mA across a voltage range of 19V to 25V, providing up to 11W of power.</p><p>&nbsp;</p><p>This driver features an AC-DC converter topology with a single output and supports ELV and Triac dimming for versatile lighting control. It includes built-in protection features such as overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection, ensuring reliable operation.</p><p>&nbsp;</p><p>The unit is housed in a compact enclosure measuring 106.7mm x 60.3mm x 25.2mm with wire lead terminations. It is rated IP64 and IP20, making it suitable for damp locations, and complies with NEMA 410. Operating temperature range is -30°C to 90°C.</p>

<p>The ERP Power ESP040W-0900-42 is an AC-DC constant current LED driver designed for commercial, residential, and architectural lighting applications. It delivers a 900mA constant current drive with an output voltage range of 24 to 42 VDC and a maximum output power of 38 W. The driver accepts a universal input voltage of 120 to 277 VAC and achieves up to 87% efficiency with power factor greater than 0.9 and total harmonic distortion less than 20%.</p><p>&nbsp;</p><p>This driver supports tri-mode dimming: analog 0-10V, TRIAC (forward-phase), and ELV (reverse-phase) dimming with a dimming range of 1% to 100% of output current. It features a fast startup time of 300 ms typical. Protections include output open load, over-current, short-circuit (hiccup mode), and over-temperature with auto recovery.</p><p>&nbsp;</p><p>The ESP040W-0900-42 is housed in an IP64-rated case with silicone-based potting, with wire lead terminations. Dimensions are 87.0 mm x 59.9 mm x 27.2 mm. Operating temperature range is -30°C to 90°C case temperature, with a minimum lifetime of 50,000 hours at 70°C case temperature. This part is not recommended for new designs; ERP recommends the ESPT series as a replacement.</p>

<p>The ERP Power ESS040W-0800-42 is a constant current LED driver designed for indoor and outdoor lighting applications. It provides 800mA output current over a voltage range of 28-42V, delivering up to 34W of power. The driver accepts universal input voltage from 120 to 277 VAC and features Tri-Mode Dimming™ compatibility with TRIAC (forward-phase), ELV (reverse-phase), and 0-10V dimmers. It offers high efficiency up to 87% typical, with a power factor &gt;0.9 and THD &lt;20%. The driver is housed in a compact plastic case measuring 83.8 x 39.9 x 25.1 mm with wire leads termination. It is IP64 rated for protection against dust and water splashes, and features silicone-based potting for thermal management. Protections include output open load, over-current, short-circuit (hiccup), and over-temperature with auto recovery. The driver complies with FCC Part 15 Class B (120 Vac) and Class A (277 Vac), EN55015, and has worldwide safety approvals including cUL, UL, cRUcs, FC, CE, CB. It is RoHS3 compliant and REACH unaffected.</p>

<p>The ERP Power ESSV020W-0400-42 is a constant current LED driver from the ESSV series, designed for commercial and residential lighting applications. It accepts a universal input voltage range of 120 to 277 VAC and delivers a regulated 400 mA output current with a voltage range of 24 to 42 VDC, providing up to 16.8 W of power.</p><p>&nbsp;</p><p>The driver features Tri-Mode Dimming, supporting TRIAC (forward-phase), ELV (reverse-phase), and 0-10V analog dimming from 1% to 100% of output current. It achieves typical efficiency of 87% and a power factor greater than 0.9. Protections include open load, over-current, short-circuit, and over-temperature with auto recovery. The unit is housed in an IP66-rated, silicone-potted plastic case measuring 83.8 x 39.9 x 27.2 mm with wire lead terminations. It carries UL Class P and 5VA flammability ratings, and meets Class 2 power supply requirements. The driver is certified to CE, cULus, and cURus standards.</p>

<p>The ERP Power ESST040W-0800-42 is a constant current LED driver from the ESS/ESST series, designed for indoor and outdoor LED lighting applications. It accepts 120 VAC input and delivers a constant current output of 800mA with a voltage range of 28-42V, providing up to 34W of power.</p><p>&nbsp;</p><p>This driver features Tri-Mode Dimming™, supporting TRIAC (forward-phase), ELV (reverse-phase), and 0-10V analog dimming methods, with a dimming range of 1-100%. It achieves up to 87% efficiency and a power factor greater than 0.9, with total harmonic distortion less than 20%.</p><p>&nbsp;</p><p>The driver is IP64 rated with a silicone-based potting compound, making it suitable for damp and outdoor environments. It measures 83.8mm x 39.9mm x 25.1mm and has wire lead terminations. Protections include over-current, over-temperature, and short-circuit protection with auto recovery.</p><p>&nbsp;</p><p>The ESST040W-0800-42 complies with ENERGY STAR, DLC, and CA Title 24 requirements, and carries worldwide safety approvals including cRUcs, SA, ENEC, FC, CE, CCC, CB, KC, NEMKO, UL, CSA. EMI compliance meets FCC Part 15 Class B and EN55015.</p>

<p>The ESP040W-0800-42 is a 34W constant current LED driver from ERP Power, LLC, part of the ESP series. It is designed for indoor and outdoor commercial, architectural, and residential lighting applications. This AC-DC converter accepts 120 to 277 VAC input and delivers a regulated 800mA constant current output with a compliance voltage range of 24 to 42 VDC.</p><p>&nbsp;</p><p>Key electrical specifications include 87% typical efficiency, power factor &gt;0.9, and total harmonic distortion &lt;20%. The driver features Tri-Mode dimming™ supporting 0-10V, TRIAC (forward phase), and ELV (reverse phase) dimmers with a 1% to 100% dimming range. Startup time is 300ms typical. Protections include over-current, over-temperature, and short-circuit with auto recovery.</p><p>&nbsp;</p><p>The unit is housed in an IP64-rated case with silicone-based potting, making it suitable for damp locations. Dimensions are 87.0 x 59.9 x 27.2 mm with wire lead terminations. Operating temperature range is -30°C to 90°C with a maximum case temperature of 90°C. Lifetime is rated at 50,000 hours minimum at 70°C case temperature. Compliance includes cUL, UL, cRUcs, FCC, CE, CB, RoHS3, and REACH. Note: This part is not recommended for new designs; the manufacturer recommends using the ESPT series for new designs.</p>

<p>The CDB260W-1300-280-R from ERP Power is a 260 watt programmable constant current LED driver from the CDB260 series. It accepts nominal 120/277 VAC input and delivers an output voltage range of 114 to 400 Vdc with a programmable output current from 325 mA to 1700 mA. Efficiency reaches up to 93% typical with total harmonic distortion below 20% and power factor greater than 0.90.</p><p>&nbsp;</p><p>The driver features a non-linear 0-10V dimming profile with dim-to-off capability and a dimming range of 1 to 100%. Integrated Bluetooth Mesh enables wireless lighting controls, grouping, and scheduling without a central gateway. An auxiliary output of 12 V / 100 mA is provided for powering sensors or control modules.</p><p>&nbsp;</p><p>Housed in an aluminum case with IP66 ingress protection and silicone-based potting, the driver is suitable for outdoor and indoor environments. Surge protection includes 4 kV line to line and line to earth, plus 2.5 kV ring wave per ANSI/IEEE standards. EMI compliance meets FCC CFR Title 47 Part 15 Class A. The driver is UL Class P rated with a lifetime of 50,000 hours at 70°C case temperature.</p>

<p>The ERP Power, LLC ERM050W-1800-28 is a 50W constant current LED driver with an AC-DC converter topology. It provides a single output of 1.8A over a voltage range of 21 to 28V, suitable for high-current COB LEDs and various commercial lighting fixtures.</p><p>&nbsp;</p><p>Key electrical specifications include nominal input voltages of 120 and 277 VAC, a typical efficiency of 90%, and analog dimming capability from 10% to 100% of output current. The driver integrates protection features: over-current (OCP), over-temperature (OTP), and short-circuit (SCP) with auto recovery.</p><p>&nbsp;</p><p>The driver is housed in an IP64-rated metal case with silicone-based potting for environmental protection. Mechanical dimensions are 81.5 mm x 56.1 mm x 32.5 mm, with wire lead termination. It operates over a case temperature range of -30°C to 90°C (90°C maximum hot spot).</p><p>&nbsp;</p><p>Typical applications include high bay lights, troffers, outdoor LED lighting, office and industrial LED lighting. The driver complies with FCC Part 15 (Class B at 120 Vac, Class A at 277 Vac) and ENERGY STAR / DLC requirements.</p>

<p>The ERP Power ESPT060W-1400-42-Z1 is a constant current LED driver designed for indoor and outdoor lighting applications. It operates from a 120VAC input and delivers a nominal output current of 1.4A over a voltage range of 28V to 42V, providing up to 59W of power with 87% efficiency.</p><p>&nbsp;</p><p>This AC-DC converter supports multiple dimming methods including analog, ELV, and Triac, making it suitable for a variety of dimmable LED fixtures. The driver includes protection features such as overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection for reliable operation.</p><p>&nbsp;</p><p>The driver is housed in a compact enclosure measuring 84.8mm x 59.9mm x 30.0mm with wire lead terminations. It carries an IP64 ingress protection rating, indicating protection against dust and splashing water. The driver is approved by multiple agencies including UL, CSA, ENEC, CE, and CCC.</p>

<p>The CDB260W-0860-400-R is a 260W programmable constant current LED driver from ERP Power's CDB260 series. It operates as an AC-DC converter with a nominal input voltage of 120/277 Vac and delivers a programmable output voltage range of 114 to 400 Vdc at selectable output currents of 650 mA or 860 mA. The driver achieves up to 93% typical efficiency and features both analog (0-10V) and Bluetooth Mesh dimming with a dimming range of 1-100%.</p><p>&nbsp;</p><p>The driver is housed in an IP66-rated aluminum case with silicone-based potting, making it suitable for outdoor and indoor applications such as street lights, area lights, horticulture grow lights, and industrial high-bay lights. It includes protection features: overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP). Surge protection is rated at 4 kV line-to-line and line-to-earth per IEC61000-4-5, plus 2.5 kV ring wave per ANSI/IEEE c62.41. The driver also provides an auxiliary output of 12 V / 100 mA.</p><p>&nbsp;</p><p>Compliance includes CB, CE, and cULus approvals. The driver is RoHS3 compliant and REACH unaffected. Lifetime is rated at 50,000 hours at a case hot spot temperature of 70°C. Total harmonic distortion is less than 20% and power factor is greater than 0.9. Termination is via wire leads.</p>

<p>The ERP Power ESSV010W-0250-42 is a constant current LED driver designed for commercial, residential, and architectural lighting applications. It accepts a wide input voltage range of 120 to 277 VAC and delivers a maximum output power of 10.5W at 250mA constant current, with an output voltage range of 24 to 42 VDC. The driver achieves up to 87% typical efficiency and maintains a total harmonic distortion (THD) of less than 20% with a power factor greater than 0.9.</p><p>&nbsp;</p><p>This driver supports Tri-Mode dimming, compatible with 0-10V analog, TRIAC (forward-phase), and ELV (reverse-phase) dimmers, offering a dimming range from 1% to 100%. It includes comprehensive protections such as over-current, over-temperature, short-circuit, and output open load, with auto-recovery on over-temperature. The driver has a minimum lifetime of 50,000 hours at 70°C case temperature.</p><p>&nbsp;</p><p>Encased in an IP66-rated plastic housing with silicone-based potting, the ESSV010W-0250-42 is suitable for indoor and outdoor use. It is UL Class P rated with a 5VA flammability rating and meets Class 2 power supply requirements. The driver complies with FCC Part 15 Class B (120V) / Class A (277V), EN55015, ENERGY STAR, DLC, and CA Title 24 standards. Dimensions are 84.7 x 40.7 x 27.3 mm with wire lead termination.</p>

<p>The CDB260W-0860-400-W is a 260W constant current LED driver from ERP Power, part of the CDB260 series. It is an AC-DC converter with a nominal input voltage of 120/277 Vac and provides a programmable output voltage range of 114 to 400 Vdc and output current range of 325 to 1700 mA, with specific currents of 650 mA and 860 mA selectable. The driver achieves up to 93% typical efficiency with total harmonic distortion less than 20% and power factor greater than 0.90.</p><p>&nbsp;</p><p>Dimming is supported via analog 0-10V and Bluetooth Mesh wireless communication, with a dimming range of 1 to 100%. The driver includes protection features such as overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection, plus surge protection up to 4 kV. An auxiliary output of 12V/100 mA is also provided.</p><p>&nbsp;</p><p>The case is IP66-rated with silicone-based potting for outdoor use, and the dimensions are 216.9 mm x 50.8 mm x 38.6 mm. Termination is via wire leads, and the antenna is a wire whip with an external removable option. Compliance includes CB, CE, cULus approvals, FCC Part 15 Class A EMI, and RoHS3.</p>

<p>The ESS030E-0500-42 is a constant current LED driver part of the ESS series from ERP Power, LLC. It is designed to power LED lighting fixtures with a nominal output of 21W at 500mA constant current. The driver accepts a 220-240 VAC input and provides a regulated output voltage range of 28-42V. With a typical efficiency of 87%, it minimizes power loss.</p><p>&nbsp;</p><p>Dimming is supported via analog (0-10V) and ELV (reverse-phase) methods, offering a dimming range from 1% to 100% of output current. The driver includes built-in protections: over-current, over-temperature, and short circuit with auto recovery. Power factor is greater than 0.9 and total harmonic distortion is less than 20%, ensuring compliance with energy standards.</p><p>&nbsp;</p><p>The driver is housed in a plastic case with IP64 ingress protection, making it suitable for both indoor and outdoor applications. Dimensions are 83.8mm x 39.9mm x 25.1mm with wire lead terminations. Maximum case hot spot temperature is 90°C, and the lifetime is rated at 50,000 hours at 70°C case temperature. Safety approvals include cRUcs, SA, ENEC, FC, CE, CCC, CB, KC, NEMKO, UL, and CSA.</p>

<p>The ERP Power CDB260W-1300-280-W is a 260W programmable constant current LED driver from the CDB260 series. It features an AC-DC converter topology with a nominal input voltage of 120/277 Vac and a programmable output voltage range of 114 Vdc to 400 Vdc. The output current is programmable from 325 mA to 1700 mA, with a typical efficiency of 93%.</p><p>&nbsp;</p><p>This driver supports both analog 0-10V dimming and Bluetooth Mesh wireless communication, enabling flexible lighting control without additional wiring. It includes an auxiliary output of 12V/100 mA for powering sensors or control modules. Protection features include overcurrent (OCP), overtemperature (OTP), and short-circuit (SCP) protection.</p><p>&nbsp;</p><p>The driver is housed in an IP66-rated aluminum case with wire leads for termination. Dimensions are 216.9 mm length, 50.8 mm width, and 38.6 mm height. It is approved to CB, CE, and cULus standards and is RoHS3 compliant.</p>

<p>The CDB260W-1700-210-W is a 260W programmable constant current LED driver from ERP Power, LLC, part of the CDB260 series. It accepts a nominal input voltage of 120/277 Vac and provides a constant current output programmable from 325 mA to 1700 mA, with output voltage ranging from 114 to 400 Vdc. The driver achieves up to 93% typical efficiency and features a power factor greater than 0.90 with total harmonic distortion less than 20%.\n\nDimming is supported via analog 0-10V control and integrated Bluetooth Mesh, enabling wireless lighting controls without a central gateway. An auxiliary output of 12 V/100 mA is available for powering sensors or other low-power devices. The driver includes surge protection up to 4 kV line-to-line and line-to-earth per IEC 61000-4-5, and 2.5 kV ring wave per ANSI/IEEE C62.41.\n\nThe driver is housed in an aluminum case measuring 216.9 mm x 50.8 mm x 38.6 mm with wire leads for termination. It is rated IP66 for outdoor and indoor use, with silicone-based potting for environmental protection. The maximum case temperature is 90°C, and the typical lifetime is 50,000 hours at a case temperature of 70°C. EMI compliance is to FCC CFR Title 47 Part 15 Class A.</p>

<p>The ERP Power, LLC NFC_WAND is a specialized programming cable designed to interface with specific ERP Power LED drivers. This accessory is essential for programming the CNB, VZM, and DAL series of drivers using Near Field Communication (NFC) technology.</p><p>&nbsp;</p><p>The cable enables engineers and technicians to configure the parameters of compatible ERP drivers, ensuring optimal performance and integration into various lighting applications. Its primary function is to facilitate the NFC programming process, allowing for efficient setup and adjustment of driver settings.</p><p>&nbsp;</p><p>This programming cable is a key component for users of the ERP Power CNB, VZM, and DAL series drivers. It ensures that the drivers can be accurately programmed to meet the specific requirements of a lighting design. The part number for this NFC wand is NFC_WAND.</p>

<p>The ESPT-CLIPS-1K is a mounting clip accessory from ERP Power, LLC, specifically designed for use with ESPT series power supplies. It provides a mechanical solution for securing or mounting the power supply unit in various applications.</p><p>&nbsp;</p><p>This clip is classified under power supply accessories and is intended for use with ESPT power supplies. Compliance data indicates RoHS3 and REACH unaffected status, though this information is unverified at low confidence.</p><p>&nbsp;</p><p>The clip does not have a specific datasheet linked, and physical dimensions, material composition, and packaging details are not available from the source data. It is recommended to verify compatibility and mechanical specifications with the manufacturer for precise application requirements.</p>