TE Connectivity

<p>The TE Connectivity 160759-1 is a female quick disconnect receptacle designed for reliable wire-to-tab connections. It accepts 16-20 AWG wire and features a 0.250" (6.35mm) tab width with a 0.032" (0.81mm) tab thickness.</p><p>&nbsp;</p><p>This non-insulated terminal uses a crimp termination method and is made from brass for good conductivity. It is a free hanging (in-line) mount type, suitable for applications where a quick, secure connection is needed.</p><p>&nbsp;</p><p>The overall length of the terminal is 22.30mm (0.878"). It is a standard terminal type, designed for use with matching 0.250" quick disconnect tabs.</p>

<p>The TE Connectivity 776163-4 is a 35-position header with 3 rows and a 4.00mm pitch, featuring a right-angle, panel mount with through-hole solder termination. The shrouded 4-wall design includes a locking ramp for secure mating and strain relief. Contacts are made of brass with a tin finish, providing reliable conductivity and corrosion resistance. The housing is gray glass-filled PBT insulation.</p><p>&nbsp;</p><p>Rated for 250VAC, the current rating varies by wire gauge. The connector is designed for board-to-cable/wire applications and includes a board guide. It is sealed for use in harsh environments.</p><p>&nbsp;</p><p>Operating temperature range is -40°C to 105°C. The part is RoHS3 compliant and has MSL 1 unlimited. Compliance data is unverified and should be confirmed from the datasheet.</p>

<p>The TE Connectivity 216843-1 is a non-insulated male quick disconnect tab designed for through-hole press-fit mounting. This terminal features a tab width of 0.250" (6.35mm) and a tab length of 0.374" (9.50mm) with a tab thickness of 0.032" (0.81mm). The contact is made from phosphor bronze and finished with tin plating for reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This quick disconnect connector is suitable for applications requiring a secure, easily detachable electrical connection. The press-fit termination allows for mechanical retention without soldering, simplifying assembly processes. The non-insulated design makes it appropriate for use where insulation is not required or where additional insulation can be applied separately.</p><p>&nbsp;</p><p>Total length of the terminal is 18.50mm (0.728"). As a standard terminal type, it is compatible with common 0.250" quick disconnect receptacles and mate with corresponding female quick disconnect connectors.</p>

<p>The TE Connectivity 1-1563878-1 is a 15-position receptacle connector housing from the AMP MCP 2.8/1.5K series. Designed for free hanging (in-line) mounting, this housing uses a slide-on fastening mechanism and crimp termination for secure wire connections. It is sealed, providing protection against moisture and contaminants. The housing has 2 rows with a row spacing of 6.00mm (0.236 inches). It operates over a wide temperature range from -40°C to 140°C. The component is black and weighs 32.4 grams. This housing is intended for use with corresponding headers from the same series, forming a mated pair assembly. The part is available in multiple color options; this variant is black. It is suitable for applications requiring reliable, sealed interconnections in demanding environments.</p>

<p>The 5787956-1 is a 6-contact IEEE 1394 (Firewire) receptacle connector from TE Connectivity. It features through hole vertical mounting with solder termination and an integrated board lock for secure attachment to the PCB. The connector is rated for 1.5A current and 40VAC voltage, with an operating temperature range of -55°C to 85°C. It is designed for 1500 mating cycles and is wave solder capable up to 265°C. The part is RoHS, REACH, and China RoHS compliant, with low halogen content (Br/Cl &lt;900ppm) and free of BFR/CFR/PVC. This connector is suitable for high-speed data transfer applications in consumer electronics, computer peripherals, digital video equipment, and industrial automation systems.</p>

<p>The TE Connectivity 3-1564516-1 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. This plug-style housing accommodates 10 positions arranged in 2 rows with a row spacing of 6.00 mm.</p><p>&nbsp;</p><p>It features a free hanging (in-line) mounting style with a slide-on fastening mechanism for secure mating. Contact termination is via crimp, allowing for custom wire assembly. The green housing is sealed, providing protection against moisture and contaminants in demanding environments.</p><p>&nbsp;</p><p>Operating temperature range spans from -40°C to 140°C, suitable for automotive, industrial, and outdoor applications. The housing is designed for use with compatible tab contacts (not included).</p>

<p>The TE Connectivity 776087-5 is a rectangular connector header designed for board-to-cable/wire applications. It has 23 positions arranged in 3 rows with a 4.00mm pitch and 4.00mm row spacing. The connector features a right angle orientation and is panel mount with through hole solder termination. The contacts are male pins made of brass with tin plating. The housing is made of glass-filled polybutylene terephthalate (PBT) in blue color and is fully shrouded with 4 walls. The shrouding includes a locking ramp for secure mating. Additional features include a board guide and sealed construction. The operating temperature range is -40°C to 105°C. The voltage rating is 250VAC, and current rating varies by wire gauge.</p>

<p>The TE Connectivity 9-1393644-4 is a DIN 41612 Style C plug connector designed for high-density backplane and rack systems. It has 96 total positions with 64 loaded, arranged in 3 rows at a 2.54mm (0.100 inch) pitch. The connector uses through hole right angle mounting with solder termination, ideal for compact PCB layouts. Contacts are finished with gold or gold-palladium for reliable conductivity and corrosion resistance. It meets Level/Class 2 performance standards. This connector is suitable for applications requiring robust signal integrity in industrial and telecom environments.</p>

<p>The TE Connectivity 776280-2 is a board-to-cable/wire header connector featuring 8 male pin contacts arranged in 3 rows with a 4.00mm pitch and row spacing of 4.00mm. It is designed for panel mount, through hole, right angle mounting with solder termination. The connector is fully shrouded with 4 walls and uses a locking ramp for secure fastening. Contacts are made of brass with a tin finish, and the insulator is glass-filled PBT in natural color. The operating temperature range is -40°C to 105°C. This header is suitable for applications requiring a robust, sealed connection.</p>

<p>This TE Connectivity 2-1658526-9 is a 16-position IDC receptacle connector designed for free hanging (in-line) mounting. It features a 2.54mm pitch and row spacing, with female socket contacts finished in 30µin gold for reliable conductivity and corrosion resistance. The connector uses IDC termination for 28-30 AWG ribbon cable, enabling quick assembly without wire stripping. A polarizing key ensures correct orientation during mating. The blue housing is suitable for internal wiring applications in electronics and signal connections. This connector is part of TE Connectivity's rectangular connector family, offering a standard 2.54mm pitch compatible with many ribbon cable systems.</p>

<p>The TE Connectivity 936294-2 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. It is a receptacle type housing with 6 positions arranged in 2 rows. The housing features a locking ramp fastening type that provides secure mating with compatible plug housings. It is designed for free hanging (in-line) mounting, making it suitable for applications where panel mounting is not required. The housing accepts tab contacts via crimp termination, allowing for reliable and repeatable connections. The housing is black in color and is RoHS3 compliant and REACH unaffected.</p>

<p>The TE Connectivity 641831-1 is a Universal MATE-N-LOK rectangular power connector header. It features 6 positions in a single row with a 6.35mm pitch, designed for wire-to-board applications. The header is shrouded with 4 walls and includes a locking ramp for secure mating. Contacts are male pins made of phosphor bronze with pre-tin plating, rated for 12A (max 19A per contact) at 600VAC. The housing is white nylon with a UL94 V-0 flammability rating. This through-hole component mounts vertically on the PCB and is solder terminated. Operating temperature range is -55°C to 105°C.</p>

<p>The TE Connectivity 9-160313-5 is a standard female quick disconnect receptacle designed for 13-17 AWG wire. It features a 0.250" (6.35mm) tab width and 0.032" (0.81mm) tab thickness, with a tab length of 0.303" (7.70mm). The overall length is 23.20mm (0.913").</p><p>&nbsp;</p><p>The contact is made of phosphor bronze with a tin finish, ensuring reliable electrical performance and corrosion resistance. The terminal is crimp-style and the non-mating end is insulated, with a blue color identifier. The mounting type is free hanging (in-line).</p><p>&nbsp;</p><p>This component is suitable for power and signal connections in a variety of applications where a quick and secure disconnect is required. The crimp termination provides a strong mechanical and electrical bond when used with the appropriate tooling.</p>

<p>The TE Connectivity 1318389-1 is a rectangular connector housing designed for free hanging (in-line) applications. It is a plug type housing with 40 positions arranged in 2 rows at a 2.20mm pitch, with a 3.00mm row spacing. The housing uses female socket contacts with crimp termination and features a locking ramp fastening type for secure mating. It is rated for an operating temperature range of -30°C to 105°C and comes in a natural color. This housing is designed for use with compatible rectangular connector headers and contacts to create a reliable wire-to-wire or wire-to-board connection system. Its compact design and standard pitch make it suitable for a wide range of electronic interconnect applications.</p>

<p>The 85011-1 is a sealing plug accessory manufactured by TE Connectivity. It is specifically designed for use with Econoseal III housings, providing a reliable seal to protect connections from environmental contaminants.</p><p>&nbsp;</p><p>This component is classified as a terminal accessory and is RoHS3 compliant, REACH unaffected, and has an MSL rating of 1 (unlimited). These compliance attributes support its use in a wide range of applications where environmental and safety standards are required.</p><p>&nbsp;</p><p>As a sealing plug, it is a passive mechanical component with no electrical rating. Its primary function is to seal unused cavities in Econoseal III connectors, maintaining the integrity of the connector system.</p>

<p>The TE Connectivity 1-776228-5 is a 23-position, 4mm pitch vertical header designed for board-to-cable/wire connections. It is part of the AMPSEAL series and features a blue glass-filled PBT housing with a silicone gasket for sealing. The header is shrouded with four walls and includes a locking ramp for secure mating. Contacts are made of brass with gold-palladium plating, offering reliable performance. This header is rated for 250VAC and has an operating temperature range of -40°C to 125°C. Current rating varies by wire gauge. The component is panel mount and through-hole solder termination. It includes mounting flanges with recommended M2.5 screws and a panel thickness of 4.75mm. The screw torque should be 0.6-0.8 N-m. The header mates with plug assembly 770680 and uses terminals 770520 or 770854. The housing is mechanically keyed by color; this part is blue. The part weighs approximately 22.68g.</p>

<p>This rectangular connector housing from TE Connectivity is a panel-mount plug with 8 positions arranged in 2 rows at a 4.00mm pitch and 6.00mm row spacing. The housing features a slide-on fastening type and supports crimp termination for reliable wire-to-wire connections. Its gray color and sealed design with mounting flanges make it suitable for demanding environments.</p><p>&nbsp;</p><p>Designed for applications requiring secure and durable interconnects, this housing accommodates tab contacts and operates across a wide temperature range from -40°C to 140°C. The panel-mount configuration allows for integration into enclosures or bulkheads where a robust interface is needed.</p><p>&nbsp;</p><p>This connector housing is part of TE Connectivity's rectangular connector family, providing a standardized interface for power and signal connections. The crimp termination allows flexible wire gauge selection and field servicing without specialized tooling beyond standard crimp tools.</p>

<p>The TE Connectivity 213893-2 is a circular connector receptacle housing designed for use with female crimp sockets. It features 10 positions arranged as 8 signal contacts (size 16) and 2 power contacts (size 8). The housing is constructed from black polyamide (nylon) with a UL94 V-0 flammability rating, ensuring robust performance in demanding environments.</p><p>&nbsp;</p><p>This housing is panel mounted using a flange and secured with a threaded coupling mechanism. It is keyed for proper orientation and offers IP65/IP67 ingress protection, making it dust-tight, water-resistant, and waterproof. The housing is unshielded and accepts crimp contacts.</p><p>&nbsp;</p><p>Ideal for applications requiring a reliable, environmentally sealed connection in industrial, automotive, or outdoor equipment. The housing is RoHS3 compliant and REACH unaffected, with an MSL of 1 (unlimited).</p>

<p>The TE Connectivity 6469028-1 is a Z-PACK HM-Zd high speed backplane receptacle designed for board-to-board applications. This daughtercard connector provides a total of 60 positions arranged in a 4-row by 10-column layout, comprising 40 signal positions and 20 ground positions for improved signal integrity. The connector features a 2.5 mm column pitch and 1.5 mm row-to-row spacing.</p><p>&nbsp;</p><p>Electrical performance supports operating voltages up to 250 VAC and a maximum data rate of 12 Gb/s per differential pair, with each contact rated at 0.7 A. Contacts are made of copper-nickel-silicon alloy with a 0.76 µm gold plating on the mating area. The housing is gray glass-filled polyester (UL 94V-0 rated) with a phosphor bronze shield.</p><p>&nbsp;</p><p>The connector mounts to the board edge using through-hole press-fit termination at a right angle orientation. It is fully shrouded with polarization keying for correct mating alignment. The operating temperature range spans -65°C to 105°C. Packaging is in tube format.</p>

<p>The TE Connectivity 1473413-1 is a rectangular connector housing designed for wire-to-board applications. It features a receptacle configuration with 24 positions arranged in 2 rows, and a contact pitch of 2.20mm with a row spacing of 3.00mm. The housing is panel mount and accepts tab-type contacts that are terminated via crimp. The natural color housing operates over a temperature range of -30°C to 105°C. This housing is suited for use in a variety of industrial and commercial electronic assemblies requiring a reliable, polarized connector interface.</p>

<p>The TE Connectivity 2-2834074-2 is a miniature waterproof plug housing designed for solid state lighting connector assemblies. It accommodates 2 positions and supports cable to wire to wiring style. The housing is constructed from black thermoplastic with a latch lock fastening mechanism for secure mating. This connector is intended for free hanging (in-line) mounting and uses crimp termination. The pitch between contacts is 2.50mm. The operating temperature range is -40 to 105 degrees Celsius.</p>

<p>The TE Connectivity 794939-1 is a 4-position rectangular connector housing from the Mini Universal MATE-N-LOK (UMNL) series. It is designed for use with male or female crimp contacts, providing a reliable connection in a compact form factor.</p><p>&nbsp;</p><p>Key specifications include 4 positions arranged in 2 rows with a 4.14mm pitch and row spacing. The housing features a locking ramp fastening type for secure mating and is natural in color. It accepts crimp contacts for field-installable terminations.</p><p>&nbsp;</p><p>The housing is designed for panel mount with snap-in installation, simplifying assembly. It operates over a temperature range of -20°C to 105°C. Compliance includes RoHS3, REACH unaffected, Halogen Free (low halogen), EU ELV, and China RoHS.</p><p>&nbsp;</p><p>This connector housing is part of TE's Mini UMNL system, suitable for wire-to-wire or wire-to-board applications in automotive, industrial, and consumer electronics where a reliable, space-saving interconnect is required.</p>

<p>The TE Connectivity 2-1703808-1 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. This plug housing features 4 positions arranged in 2 rows with a 6.00mm pitch and 6.00mm row spacing. It utilizes a slide-on fastening type and includes a mounting flange for secure panel mounting. The housing is gray in color and supports crimp contact termination with tab contacts. It is rated for an operating temperature range of -40°C to 140°C. The sealed design and mounting flange make it suitable for applications requiring environmental protection and secure attachment.</p>

<p>The TE Connectivity 2238200-3 is a FASTON 187 series flag quick disconnect terminal designed for reliable wire-to-tab connections. It features a 0.187" (4.75mm) tab width, 0.032" (0.81mm) thickness, and 0.250" (6.35mm) length. This female terminal accepts 16-20 AWG wire and uses a crimp termination method. The angled 90° flag design allows for right-angle mounting in free-hanging (in-line) applications. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. It is non-insulated, suitable for applications where insulation is not required. This terminal is part of TE's FASTON standard line, known for reduced insertion force and backward compatibility with existing FASTON housings.</p>