TE Connectivity

<p>The TE Connectivity 1-5499922-2 is a 64-position, 2-row shrouded header designed for board-to-cable/wire applications. It features a 2.54mm pitch and 0.100" row spacing, with all positions loaded. The header uses male pin contacts with a square contact shape and a tin finish of 15.0µin (0.38µm).</p><p>&nbsp;</p><p>This through-hole component has a solder termination and a black insulation body with a UL94 V-0 flammability rating. The shrouding is a 4-wall design with latch lock/eject hooks for secure mating. The insulation height is 13.94mm, and the overall contact length is 0.639" (16.23mm).</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 1A and a voltage rating of 250VAC. The operating temperature range is -65°C to 105°C. Additional features include a keying slot and mounting flange for alignment and secure attachment.</p>

<p>The TE Connectivity 213768-4 is a 23-position, 2-row male pin header connector designed for board-to-board or cable applications. It features a 6.35mm pitch and 5.08mm row spacing, with through hole right angle mounting for secure attachment. The shrouded 4-wall housing provides contact protection and alignment.</p><p>&nbsp;</p><p>Electrical ratings include 7.5A current capacity and 600V voltage rating, suitable for moderate power distribution. The operating temperature range extends from -55°C to 130°C, allowing use in varied environments. Contacts are made of brass with 30µin tin finish, offering good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>The insulation is molded from black polyamide (PA) nylon with a UL94 V-0 flammability rating, enhancing safety. A mounting flange is included for additional mechanical stability. The push-pull fastening type simplifies mating and unmating. This connector is RoHS3 compliant and rated MSL 1 (unlimited), though compliance data is unverified.</p>

<p>The TE Connectivity 1-794613-1 is a stamped crimp pin contact designed for use in rectangular connector systems. It accommodates wire gauges from 26 to 30 AWG and features a reliable crimp termination method.</p><p>&nbsp;</p><p>The contact is finished with gold plating of 15.0 microinches (0.38 micrometers), providing excellent corrosion resistance and reliable electrical performance over multiple mating cycles. The stamped construction ensures consistent dimensions and cost-effective high-volume production.</p><p>&nbsp;</p><p>This pin contact is suitable for a wide range of signal and low-power applications where secure, removable connections are required. It is commonly used in wire-to-board and wire-to-wire rectangular connector assemblies.</p>

<p>The TE Connectivity 103308-2 is a 14-position, 2-row shrouded header designed for board-to-cable/wire applications. It features a 2.54mm (0.100") pitch and a through-hole mounting style with solder termination. The header is fully shrouded with a 4-wall design, providing robust protection for the male pin contacts.</p><p>&nbsp;</p><p>Key specifications include a current rating of 1A per contact, an operating temperature range of -65°C to 105°C, and a UL94 V-0 flammability rating for the black insulation. The contacts are made of brass with a tin-lead finish (15.0µin thickness) and have a square contact shape. The header includes a keying slot feature for alignment.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring a reliable, polarized connection between a PCB and a cable or wire assembly. The push-pull fastening type allows for easy mating and unmating.</p>

<p>The TE Connectivity 173851-1 is a rectangular connector housing designed for wire-to-wire applications. It is a plug housing (female socket contacts) with 12 positions arranged in 2 rows, with a pitch of 3.50mm and a row spacing of 5.90mm. The housing is made of white thermoplastic material and features a latch holder fastening system for secure mating.</p><p>&nbsp;</p><p>This housing uses crimp-type contacts and is intended for free hanging (in-line) mounting, making it suitable for applications where a panel mount is not required. The operating temperature range is from -30°C to 105°C.</p><p>&nbsp;</p><p>The 173851-1 is part of TE Connectivity's rectangular connector housing family, commonly used in industrial, automotive, and consumer electronics applications requiring a reliable, multi-position interconnect.</p>

<p>The TE Connectivity 747275-2 is a strain relief accessory designed for use with AMPLIMITE Series HDF-20 ribbon cable connectors. It accommodates 25 positions, providing mechanical support and cable strain relief for D-sub connector assemblies. This component is compliant with EU RoHS, ELV, China RoHS, and REACH regulations, though it is not classified as low halogen. The strain relief is suitable for applications requiring secure cable retention in connector systems. As part of the AMPLIMITE family, this strain relief ensures reliable connection integrity in industrial and commercial electronic systems. The part is rated for unlimited moisture sensitivity level (MSL 1).</p>

<p>The TE Connectivity 323199 is a non-insulated circular ring terminal designed for reliable wire termination. It accommodates 16-22 AWG wire and features a #6 stud size for secure mounting. The terminal is made from copper with a nickel finish, offering good conductivity and corrosion resistance. The crimp termination style ensures a strong mechanical and electrical connection. With a length of 19.02mm and width of 7.14mm, this terminal is suitable for applications requiring a compact, durable connection. The serrated termination enhances grip on the wire, improving reliability. This component is RoHS3 compliant and REACH unaffected, supporting environmental standards.</p>

<p>The TE Connectivity 52962-2 is an insulated spade terminal designed for 10-12 AWG wire and a #8 stud size. The terminal is yellow, indicating its wire range and insulation type. It features a brass contact with a tin finish, providing good conductivity and corrosion resistance. The crimp termination ensures a reliable mechanical and electrical connection, while the serrated termination enhances grip on the wire strands.</p><p>&nbsp;</p><p>This terminal is free hanging (in-line) and does not require a specific mounting hole. It is suitable for power distribution, control circuits, and general wiring applications where a secure, insulated connection is needed. The overall length is 28.22 mm (1.111 inches) and width is 9.53 mm (0.375 inches).</p><p>&nbsp;</p><p>The part is RoHS3 compliant and has an MSL of 1 (unlimited). It is also REACH unaffected. Note that compliance data is unverified and should be confirmed with the manufacturer for critical applications.</p>

<p>This TE Connectivity 52962 is an insulated spade terminal designed for 10-12 AWG wire gauge. It accepts a #8 stud size and uses a crimp termination with a serrated feature for secure connections. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. The terminal is yellow, indicating an insulated type, and is rated for free hanging in-line mounting. Dimensions are 26.72mm length and 9.53mm width. It complies with RoHS, REACH, ELV, and China RoHS directives. The halogen content is not low halogen, containing bromine or chlorine above 900 ppm. This terminal is suitable for power distribution, automotive wiring, and industrial control applications where reliable wire termination is required.</p>

<p>The TE Connectivity 229969-1 is a dust cap designed for use with D-Sub female connectors. It features 50 positions and provides protection against dust and contaminants.</p><p>&nbsp;</p><p>This accessory is part of the D-Sub connector family and is intended for applications where connector protection is needed during storage or when not in use.</p><p>&nbsp;</p><p>The cap is RoHS3 compliant and REACH unaffected, meeting environmental standards.</p>

<p>The TE Connectivity 5-1437719-1 is a circular connector assembly designed for industrial and commercial applications requiring reliable connections in harsh environments. This plug features 5 male pin contacts arranged in a keyed orientation to prevent mismating. The connector is rated for 3A per contact with a maximum voltage of 60VAC, suitable for signal and low-power applications.</p><p>&nbsp;</p><p>The shell is constructed from brass with a Tribor finish, providing corrosion resistance and durability. The connector is shielded to protect against electromagnetic interference. Panel mounting is achieved through a bulkhead feature with a threaded coupling mechanism for secure mating. The right-angle through-hole solder termination allows for compact PCB positioning.</p><p>&nbsp;</p><p>Environmental protection meets IP65 standards, ensuring dust tightness and water resistance. The operating temperature range is -40°C to 85°C, accommodating a wide range of conditions. The material flammability rating is UL94 V-2, and the product is low halogen with Br, Cl, F, I &lt; 900 ppm. Additional features include a board lock for PCB retention and hand solderability with lead-free solder.</p>

<p>The TE Connectivity 130466 is a flat sided ring connector designed for reliable electrical connections. It accepts 10-12 AWG wire and fits M5 studs. The contact is made of copper with a tin finish for corrosion resistance. The connector is insulated with a yellow housing, providing identification and protection. It features a serrated termination that enhances grip and vibration resistance. Dimensions include a length of 32.10mm, width of 9.50mm, and thickness of 0.99mm. The crimp termination style ensures a secure, permanent connection. This connector is suitable for power distribution, automotive, and industrial applications where a robust ring terminal is required.</p>

<p>The TE Connectivity 280612-2 is a vertical, shrouded header designed for board-to-board or cable applications. It features 8 positions in a single row with a 3.96mm (0.156") pitch. The connector uses through-hole solder termination and has a detent lock fastening system for secure mating. The contacts are made of brass with a 15.0µin tin finish, and the green glass-filled polycarbonate insulator is rated UL94 V-0 for flammability. The insulation height is 23.20mm, overall contact length is 16.30mm, and contact length is 10.00mm. This header is suitable for power and signal interconnections in various electronic assemblies.</p>

<p>The TE Connectivity 7-1437719-8 is an 8-position circular connector receptacle featuring female socket contacts. It is designed for panel mount installation with a bulkhead mounting feature and uses threaded fastening for secure mating. The connector is keyed for proper orientation, preventing misalignment during insertion.</p><p>&nbsp;</p><p>This connector is rated for 60 VAC and 1 A per contact, and is shielded to reduce electromagnetic interference. The metal shell is made of brass with a Tribor finish, providing durability and corrosion resistance. The operating temperature range is -40°C to 85°C, with an IP65 ingress protection rating for dust-tight and water-resistant operation.</p><p>&nbsp;</p><p>Termination is via solder contacts, and the insulator material has a UL94 V-2 flammability rating. A board lock feature aids in secure mounting to printed circuit boards. The connector is shielded and constructed from primary metal materials.</p>

<p>The TE Connectivity 3-640440-8 is an 8 position IDC (Insulation Displacement Connector) receptacle designed for 22 AWG discrete or ribbon cable. It features a single row of female socket contacts with a 2.54mm (0.100") pitch, making it suitable for standard ribbon cable applications.</p><p>&nbsp;</p><p>The connector uses a free hanging (in-line), right angle mounting style with a locking ramp fastening type for secure mating. The contacts are finished with 80.0µin (2.03µm) of tin, providing reliable conductivity and corrosion resistance. The housing is red and features a closed end design.</p><p>&nbsp;</p><p>This connector is commonly used in internal wiring harnesses and cable assemblies where a compact, reliable IDC termination is required. The right angle cable exit allows for space-saving routing in tight enclosures.</p>

<p>The TE Connectivity 204978-3 is a crimp-type pin contact designed for use in backplane connector systems. It accepts wire gauges from 16 to 20 AWG and features a gold contact finish for reliable signal transmission.</p><p>&nbsp;</p><p>This contact is classified as a signal contact type and is terminated via crimping, a common method for secure and repeatable wire attachment in high-density connector assemblies. The gold finish provides corrosion resistance and maintains low contact resistance over multiple mating cycles.</p><p>&nbsp;</p><p>As a backplane connector contact, it is suitable for use in applications requiring robust and reliable interconnections within electronic systems, such as telecommunications, data communications, and industrial control equipment.</p>

<p>The TE Connectivity 338212-2 is a standard D-Sub receptacle (DB-25) designed for signal connections. It features 25 female sockets arranged in 2 rows, housed in a steel shell with tin plating for EMI shielding and durability. The connector uses press-fit termination, enabling a reliable solderless connection through the PCB.</p><p>&nbsp;</p><p>Gold-plated contacts ensure excellent corrosion resistance and signal integrity over repeated mating cycles. The insulator material is rated UL94 V-0 for flammability, making it suitable for use in environments requiring high safety standards. The unthreaded housing/shell flange feature provides a simple mounting option.</p><p>&nbsp;</p><p>Typical applications include computer serial ports, data communication interfaces, industrial control panels, and telecommunications equipment. The through-hole mounting style with press-fit pins is ideal for automated assembly processes, reducing soldering costs and improving reliability.</p>

<p>The TE Connectivity 7-530655-1 is a dual female card edge connector designed for board-to-board power applications. It features 6 positions arranged in 2 rows with a 3.96mm centerline pitch.</p><p>&nbsp;</p><p>This receptacle offers a current rating of 5A per contact, with gold-plated phosphor bronze contacts for reliable signal integrity. The connector is through hole mounted with solder eyelet termination for secure wire and cable connections.</p><p>&nbsp;</p><p>The green polyester GF housing provides durability, and the connector operates across a temperature range of -55°C to 105°C. It includes mounting ears for PCB retention and locking lance contact retention.</p>

<p>The 38941-22 is a Pin Male circular connector contact manufactured by TE Connectivity Deutsch Connectors. This contact is designed for use in circular connector systems, providing reliable electrical connections in demanding environments.</p><p>&nbsp;</p><p>The contact is RoHS3 compliant and REACH unaffected, meeting key environmental standards. It has a Moisture Sensitivity Level (MSL) of 1, indicating unlimited floor life before soldering.</p><p>&nbsp;</p><p>As a pin-type male contact, it is suitable for mating with corresponding socket contacts in circular connector assemblies. Typical applications include industrial, automotive, and aerospace interconnect systems where robust and secure connections are required.</p>

<p>The TE Connectivity AMP Connectors 7-530666-2 is a 20-position edgeboard connector featuring a dual readout configuration with 2 rows of 10 contacts each. The connector uses a Non Specified - Dual Edge card type design compatible with standard edge cards. It offers a 3.96mm (0.156") contact pitch and accepts card thicknesses from 0.055" to 0.070" (1.40mm to 1.78mm).</p><p>&nbsp;</p><p>The connector is through-hole mounted with solder terminals for reliable mechanical attachment. Contacts are made of phosphor bronze with a gold finish of 30µin (0.76µm), providing good electrical performance and corrosion resistance. The housing is colored green.</p><p>&nbsp;</p><p>This connector is designed for operating temperatures ranging from -55°C to 105°C, making it suitable for various industrial and commercial applications.</p>

<p>The TE Connectivity 1-178288-3 is a rectangular connector housing designed for use with female socket contacts. It accommodates 3 positions in a single row with a 3.81mm (0.150") pitch. The housing is black and includes a polarizing key for correct mating orientation.</p><p>&nbsp;</p><p>This housing supports crimp termination and is intended for free hanging (in-line) mounting, making it suitable for wire-to-wire or wire-to-board applications where a secure, removable connection is needed. The operating temperature range is -55°C to 105°C.</p><p>&nbsp;</p><p>As a receptacle housing, it is the female half of a connector pair and requires separately ordered crimp contacts. It is commonly used in industrial control, automotive, and consumer electronics applications where reliable signal or power connections are required.</p>

<p>The TE Connectivity 640583-1 is a 6 position single row header with male pin contacts arranged on a 6.35mm pitch. This connector features a right angle through hole mounting style with solder termination, making it suitable for board to cable or wire applications. The header is fully shrouded with a 4 wall design and includes a locking ramp fastening system for secure mating.</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 12A and a voltage rating of 600VAC. The operating temperature range is -40°C to 105°C. Contacts are made of phosphor bronze with a tin finish, and the insulator is white polyamide (nylon) with a UL94 V-0 flammability rating. A mounting flange is included for additional mechanical stability.</p><p>&nbsp;</p><p>This component is RoHS3 compliant and has an MSL rating of 1 (unlimited). It is designed for use in power distribution and wire to board interconnect applications where a robust, polarized connection is required.</p>

<p>The TE Connectivity 1565373-4 is a 28-position, 2-row header with a 2.20mm pitch and 3.00mm row spacing, designed for board-to-cable/wire applications. It features male square pins with tin contact finish and brass contact material. The connector is shrouded with a 4-wall design and includes a latch holder fastening type for secure mating.</p><p>&nbsp;</p><p>This header is rated for 12VDC and operates over a temperature range of -30°C to 105°C. The insulation is made of glass-filled syndiotactic polystyrene (SPS-GF17) in natural color, with an insulation height of 15.49mm. The mounting type is through hole, right angle, with solder termination.</p><p>&nbsp;</p><p>The part includes a mounting flange for additional mechanical stability. Packaging options include paper box and plastic tube. The contact mating length is 5.50mm. This connector is suitable for applications requiring a reliable, compact board-to-wire interface.</p>

<p>The TE Connectivity 66592-4 is a stamped socket contact designed for crimp termination. It accepts wire gauges from 18 to 22 AWG. The contact is made of brass with a gold finish, and the contact finish thickness is 30.0µin (0.76µm). This contact is suitable for use in multi-purpose connector applications. The part is RoHS3 compliant, REACH unaffected, and has a Moisture Sensitivity Level (MSL) of 1 (Unlimited).</p>

<p>The TE Connectivity 5-103635-2 is a 3-position single row header designed for board-to-board or cable connections. It features male pins with a square contact shape and a 2.54mm pitch. The connector is mounted through hole, right angle, and terminated by solder. The housing is shrouded with 4 walls and includes a latch holder for secure fastening. The insulation material is black thermoplastic with a UL94 V-0 flammability rating and an insulation height of 5.08mm. The contacts are made of brass with a tin finish of 15.0µin thickness. The contact length is 5.84mm. The operating temperature range is -65°C to 105°C, and the current rating is 3A. A keying slot feature is included for proper alignment. The packaging is suitable for through hole mounting.</p>