Linx Technologies Inc.

<p>The Linx Technologies CONUFL001-SMD-T is a U.FL (UMCC) series coaxial connector designed for surface mount applications. It features a jack, male pin configuration with a snap-on fastening mechanism for secure mating. The connector is rated for 50 Ohm impedance and supports frequencies up to 6 GHz, making it suitable for RF and wireless applications.</p><p>&nbsp;</p><p>The housing is made of LCP material rated UL94V-0 in white, with a brass center contact finished in gold plating and a phosphor bronze ground contact also gold plated. The connector operates over a temperature range of -40°C to +90°C. It is packaged in tape and reel for automated assembly.</p><p>&nbsp;</p><p>The connector is compatible with IPEX MHF, MHFII, and Hirose U.FL interfaces. It is compliant with EU RoHS Directive, REACH (no SVHC &gt;1000ppm), and uses DRC conflict-free sourced materials.</p>

<p>The Linx Technologies BAT-HLD-001 is a mechanical retainer designed to securely hold a single 20.0mm diameter coin cell battery on a printed circuit board. As a retainer-style holder, it provides a reliable mounting solution for coin cells used in compact electronic devices.</p><p>&nbsp;</p><p>The retainer supports battery series 2025 and 2032, making it suitable for a range of common battery chemistries. Its SMD (SMT) tab termination style enables direct surface mount soldering, streamlining the assembly process. The component has a low profile with a height above the board of just 0.165" (4.20mm), conserving space in dense PCB layouts.</p><p>&nbsp;</p><p>Designed for PCB surface mount applications, this retainer is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified. The part number BAT-HLD-001 is the manufacturer's designation from Linx Technologies Inc.</p>

<p>The CONMMCX001-SMD is an MMCX coaxial connector receptacle from Linx Technologies Inc. designed for surface mount applications. It features a female socket contact with beryllium copper center contact material and gold housing color. The connector offers 50 Ohm characteristic impedance and supports frequencies up to 6 GHz, making it suitable for RF signal interconnects in compact wireless devices.</p><p>&nbsp;</p><p>This receptacle uses a snap-on fastening mechanism for quick and secure mating with MMCX plugs. Both the contact and shield terminations are solder type, enabling reliable attachment to PCB pads. The single-port design is optimized for space-constrained layouts where low-profile RF connectivity is required.</p><p>&nbsp;</p><p>The connector is rated for surface mount assembly and is compatible with standard reflow soldering processes. Its gold-plated housing provides corrosion resistance and consistent electrical performance. The part is commonly used in applications such as GPS modules, cellular modems, and wireless IoT devices where a miniature coaxial interface is needed.</p>

<p>The CONREVSMA002-G is an RP-SMA coaxial connector receptacle featuring a male pin center contact. It is designed for 50 Ohm impedance systems and supports frequencies up to 12.4 GHz. The connector uses a threaded fastening mechanism for secure mating.</p><p>&nbsp;</p><p>This right angle through hole mount version allows for compact PCB layouts where space is limited. Both the center contact and shield are terminated via solder, providing reliable electrical connections. The center contact is made of beryllium copper for durability and consistent performance.</p><p>&nbsp;</p><p>The housing has a gold color finish. This connector is suitable for RF applications requiring a reverse polarity SMA interface. It is a single port device.</p>

<p>The CONREVSMA003.062-L is an RP-SMA reverse polarity straight edge mount receptacle from Linx Technologies. It features a male pin center contact and 50 Ohm impedance, supporting frequencies up to 12.4 GHz. This connector is designed for board edge mounting with end launch and panel mount capability. It includes a bulkhead front side nut mounting feature and threaded fastening. The board thickness is 0.062 in, and the part has an extended body for specific applications. Contact and shield termination are solder type. The center contact is beryllium copper, and the housing is silver with nickel body finish. The connector is RoHS3 compliant and has MSL 1 unlimited.</p>

<p>The CONSMA002-L is an SMA receptacle connector with a female socket contact, designed for 50 Ohm impedance systems. It supports frequencies up to 18 GHz, making it suitable for RF and microwave applications.</p><p>&nbsp;</p><p>The connector features a right angle orientation with panel mount and through hole solder termination. The threaded fastening type and bulkhead front side nut mounting feature provide secure panel attachment. The center contact is made of beryllium copper, and the housing is silver in color.</p>

<p>The CONSMA001 is an SMA straight through-hole receptacle from Linx Technologies Inc. It features a female socket contact with a threaded fastening mechanism for secure mating. The connector is designed for 50 Ohm impedance and supports frequencies up to 12.4 GHz, making it suitable for RF applications.</p><p>&nbsp;</p><p>The center contact is made of beryllium copper, and the body has a nickel finish. Both the contact and shield are terminated via solder, and the connector is mounted through-hole on a PCB. The housing color is silver.</p><p>&nbsp;</p><p>This connector is part of Linx's SMA connector family, which includes standard and reverse polarity variants in straight and right-angle orientations. The CONSMA001 is the standard polarity, straight, through-hole receptacle with nickel body finish.</p>