Cinch

<p>The 142-0711-201 is a 50 Ohm SMA straight jack receptacle from Cinch Connectivity Solutions. It features a female socket contact and is designed for surface mount soldering. The connector offers a frequency range from DC to 18 GHz, making it suitable for RF and microwave applications. The housing is gold plated with beryllium copper center contact. It is threaded for secure fastening. The part is supplied in tape and reel packaging with 425 pieces per reel. The working voltage is 335 V at sea level and dielectric withstanding voltage is 1000 V RMS minimum. This connector is RoHS3 compliant (unverified) and has MSL 1 unlimited. Note: VSWR is not applicable for uncabled receptacles.</p>

<p>The 131-3701-341 is an SMB right angle bulkhead jack receptacle from Cinch Connectivity Solutions. It features a 50 Ohm impedance and operates over a frequency range of 0-4 GHz. The connector uses a snap-on fastening type and provides solder termination for both the center contact and shield. The center contact is made of brass with gold plating over a nickel underplate barrier layer, and the body is nickel plated with a gold housing color.</p><p>&nbsp;</p><p>This connector is designed for panel mount, through hole, right angle installation with a bulkhead - front side nut mounting feature. It supports a working voltage of 335 Vrms at sea level and has a dielectric withstanding voltage of 1000 Vrms. The insulation resistance is 1000 MOhm minimum, with a center contact resistance of 6 mOhm maximum initial and outer contact resistance of 1 mOhm maximum initial for gold plated connectors. Insertion loss is 0.3 dB maximum at 1.5 GHz.</p><p>&nbsp;</p><p>Typical applications include RF signal connections in test and measurement equipment, telecommunications infrastructure, and other high-frequency systems requiring a reliable 50 Ohm interface. The right angle orientation allows for space-saving PCB layouts in compact enclosures.</p>

<p>The Cinch 128-0711-201 is an ultraminiature coaxial (UMC) jack connector featuring a male pin center contact and 50 Ohm impedance. This straight PCB surface mount connector is designed for applications requiring a compact RF interconnect up to 6 GHz.</p><p>&nbsp;</p><p>Key electrical specifications include a characteristic impedance of 50 Ohms and a maximum operating frequency of 6 GHz. The connector uses a snap-on fastening mechanism for secure mating and has a maximum mated height of 2.5 mm. The gold-plated housing provides corrosion resistance and reliable signal integrity.</p><p>&nbsp;</p><p>Packaged in tape and reel (2500 pieces per reel) for automated assembly, this RoHS3 compliant connector is suitable for high-volume PCB integration. The surface mount design allows for efficient soldering directly to the board without through-hole assembly steps.</p>

<p>The 142-0701-501 is an SMA coaxial connector from Cinch Connectivity Solutions. It is a right angle bulkhead jack receptacle with a female socket interface designed for 50 Ohm impedance systems. The connector supports frequencies up to 18 GHz and is suitable for uncabled receptacle applications.</p><p>&nbsp;</p><p>The connector features a panel mount with through hole termination and a right angle orientation. The contact is made of beryllium copper with gold plating, while the body has a nickel finish. Mounting is secured via a bulkhead front side nut. The housing is gold colored.</p><p>&nbsp;</p><p>This connector is RoHS, REACH, and MSL level 1 compliant (unverified). It is ideal for use in RF systems requiring a compact, right angle interface with reliable electrical performance up to 18 GHz.</p>

<p>The DA15P is a commercial D-Subminiature plug connector from Cinch Connectivity Solutions, designed for cable assembly or wire harness applications. It features 15 male pins arranged in 2 rows with a shell size of 2 (DA, A). The connector uses solder cup termination, making it suitable for hand-wired or field-installable connections.</p><p>&nbsp;</p><p>The contacts are signal type with gold flash finish, providing reliable conductivity and corrosion resistance. The shell is made of steel with yellow chromate plated zinc finish, offering durability and protection in various environments. The housing material has a UL94 V-0 flammability rating, ensuring safety in electronic assemblies.</p><p>&nbsp;</p><p>This connector is free hanging (in-line) with an unthreaded flange feature, allowing for straightforward mounting in cable assemblies. It is rated for 5 A current per contact. The DA15P is RoHS3 compliant and REACH unaffected, suitable for use in commercial, industrial, and telecommunications equipment.</p>