Artesyn Embedded Power

<p>The Artesyn Embedded Power AIH16C300N-L is a high-power isolated DC-DC converter module from the AIH Series, delivering 250 watts of continuous output power. This single-output converter provides a regulated 15V output at up to 16.6A with a typical efficiency of 90%.</p><p>&nbsp;</p><p>The converter accepts a wide input voltage range of 250 to 420 VDC, making it suitable for distributed power architectures in industrial and commercial ITE (Information Technology Equipment) applications. It features overvoltage protection, current limiting, and enables TTL-compatible positive or negative enable logic.</p><p>&nbsp;</p><p>Packaged in a compact through-hole module measuring 61.0mm x 58.4mm x 12.7mm, the AIH16C300N-L is designed for reliable operation in demanding environments with an operating temperature range of -20°C to 100°C. The module includes remote sense, output voltage adjustment, and current share capability for parallel operation.</p>

<p>The APA501-80-003 is a vertical fin heatsink designed for use with Artesyn AMPSS (Astec Modular Power Supply System) power modules. It measures 115mm wide, 59mm deep, and 22.5mm tall, providing a free air thermal resistance of 2.2°C/W. The vertical fin orientation optimizes natural convection cooling in many orientations.</p><p>&nbsp;</p><p>This heatsink is intended for through-hole mounting and is part of the AMPSS accessory family, which includes various sizes and fin styles to match different module configurations. The 80 size designation corresponds to the module width, ensuring proper thermal interface.</p><p>&nbsp;</p><p>For reliable thermal management, the baseplate and heatsink must be connected to protective earth. A mounting kit (sold separately) provides the most convenient way to attach the heatsink to the module and secure the assembly to the circuit board.</p>

<p>The EXB50-48S05J is a 50W isolated DC DC converter from Artesyn Embedded Power, part of the EXB50 series. It accepts a wide input voltage range of 36V to 75V DC and delivers a regulated 5V output at up to 10A. Typical efficiency is 91%, minimizing power loss. Output ripple and noise are 100 mV pk-pk (20 mV rms) measured from 5 Hz to 20 MHz. Line regulation is 0.1% maximum, and load regulation is 0.2% maximum. Transient response is 2.0% peak deviation with 200 µs recovery to within total error band. Switching frequency is 300 kHz. The converter provides 1500V input-to-output isolation. Operating temperature range is -40°C to 70°C with derating in natural convection. The device is housed in a half brick through-hole package measuring 60.9mm x 57.9mm x 10.9mm and weighs 50 g. Features include remote on/off, overvoltage protection (OVP), overtemperature protection (OTP), and undervoltage lockout (UVLO). It is designed for ITE (commercial) applications.</p>

<p>The Artesyn Embedded Power NFS110-7601P is an open frame AC/DC converter designed for ITE (Commercial) applications. It provides a power output of 80W, with a higher 110W capability under forced air conditions.</p><p>&nbsp;</p><p>This converter features adjustable output, DC input capability, and universal input voltage range. It has an efficiency rating of 70% and a chassis mount type for integration into systems. The unit has four outputs, including a specific voltage of -5V with a current rating of 500 mA.</p><p>&nbsp;</p><p>Mechanical dimensions are 177.8mm in length, 108.0mm in width, and 45.7mm in height. The operating temperature range is from 0°C to 70°C, with derating applicable. It also carries CE approval.</p><p>&nbsp;</p><p>Additional features include adjustable output, DC input capability, and universal input. The part is RoHS3 compliant, has an MSL rating of 1, and is REACH unaffected, though these compliance details are unverified.</p>

<p>The Artesyn Embedded Power NLP250N-99S24J is an open frame AC/DC converter designed for ITE (Commercial) and Medical applications. It offers a rated power of 175W, with the capability to reach 250W under forced air conditions, and boasts an efficiency of 86%.</p><p>&nbsp;</p><p>Key electrical features include a single output, universal input, and adjustable output functionality. It also incorporates Power Factor Correction (PFC), remote on/off control, and remote sense capabilities, along with a standby output. The converter operates within a temperature range of 0°C to 70°C, with derating applied above certain temperatures.</p><p>&nbsp;</p><p>Mechanically, this converter is designed for chassis mounting and has dimensions of 177.8mm in length, 101.6mm in width, and 38.1mm in height. It has undergone CB approval.</p><p>&nbsp;</p><p>Environmental compliance includes RoHS3 status, though this is noted as unverified. The Moisture Sensitivity Level (MSL) is rated as 1, also unverified. REACH status is listed as unaffected, also unverified.</p>

<p>The Artesyn AEE00CC18-LS is an isolated DC DC converter from the AEE series, delivering dual ±15V outputs at 500mA each for a total output power of 15W. It features a wide 4:1 input voltage range of 9 to 36Vdc and provides 1500Vdc input/output isolation. Key electrical specifications include a typical efficiency of 84%, a switching frequency of 300kHz, and output voltage tolerance of ±2.0%. The module includes short circuit protection with auto-restart.</p><p>&nbsp;</p><p>This converter is designed for through-hole mounting in a compact 5-DIP package measuring 50.8mm x 25.4mm x 11.3mm. It can operate over an ambient temperature range of -40°C to +71°C without derating. Typical applications include industrial automation, instrumentation, test and measurement, and telecommunications equipment.</p>

<p>The Artesyn Embedded Power LPX60 is an accessory component serving as an enclosure for the LP60 Series of power supplies. This enclosure is designed to house and protect the LP60 Series power modules, ensuring their integrity and potentially aiding in thermal management or physical security within an application.</p><p>&nbsp;</p><p>Key specifications indicate that this accessory is an enclosure, intended for use with the LP60 Series. Environmental compliance data suggests it is RoHS3 compliant and has a Moisture Sensitivity Level (MSL) of 1, though these statuses are unverified and should be treated with low confidence. The REACH status is listed as unaffected.</p><p>&nbsp;</p><p>This enclosure is a crucial component for integrating LP60 Series power supplies into various systems, offering a dedicated housing solution. Its design is specific to the form factor and requirements of the LP60 Series, facilitating a secure and organized installation.</p>

<p>The DS450-3 from Artesyn Embedded Power is a Front End AC/DC Converter designed for rack mount applications. It accepts a universal input range of 90~264 VAC and provides a regulated single output of 12V at 37A, delivering up to 450W. With an efficiency of 84%, it includes advanced features such as hot-swappable capability, I²C interface, load sharing, Power Factor Correction (PFC), PMBus communication, remote sense, and a standby output.</p><p>&nbsp;</p><p>This converter is rated for commercial ITE (Information Technology Equipment) applications and holds CB and CE approvals. The mechanical package measures 305.6mm in length, 78.0mm in width, and 40.0mm in height, and it is designed for rack mounting.</p><p>&nbsp;</p><p>The operating temperature range is -10°C to 50°C. The DS450-3 is listed as RoHS3 Compliant and REACH Unaffected, with an MSL rating of 1 (Unlimited).</p>

<p>The Artesyn HPS3000-9-001 is a bulk front-end AC/DC power supply designed for distributed power architectures. It accepts a universal input of 90 to 264 VAC and delivers a main output of 48V at up to 62A (3000W), along with a 5V standby output at 3A. The unit achieves 89% efficiency at full load (200 VAC). It features hot-swappable operation, I²C/PMBus interface for digital control, and active power factor correction (PFC) with a typical power factor of 0.97. The power supply is housed in a compact 1U x 3U rack-mount enclosure (327.7 x 106.7 x 39.9 mm) and uses a card-edge input/output connection. Up to four units can be paralleled to deliver 12 kW in a standard 19-inch rack shelf. Protection features include overvoltage, overcurrent, short circuit, and overtemperature protection. The HPS3000-9-001 is certified to UL/cUL 62368, CSA, Nemko TUV, UKCA, and is suitable for ITE (commercial) applications.</p>

<p>The Artesyn Embedded Power LPT41 is an open frame AC/DC converter delivering 25W of continuous power (41W with forced air cooling). It provides three regulated output voltages: 3.3V, 5V, and 12V, with a total output current of 500 mA. The converter features adjustable output, remote sense, and universal input capability, making it suitable for a variety of commercial ITE applications.</p><p>&nbsp;</p><p>With a chassis mount form factor measuring 127.0mm x 76.2mm x 29.0mm, the LPT41 offers a compact solution for embedded power needs. It operates over a temperature range of 0°C to 70°C with derating and achieves an efficiency of 70%. The unit is approved to CB and CE standards and is designed for reliable performance in commercial environments.</p>

<p>The Artesyn Embedded Power LPT102-M is a triple output open frame AC-DC converter from the LPT100-M series. It delivers 5V, 12V, and -12V outputs with a total continuous power of 80W, expandable to 130W with forced air cooling. The unit operates from a universal input range of 90-264 Vac and offers a typical efficiency of 82%.</p><p>&nbsp;</p><p>This converter includes active power factor correction, remote sense, and overload and overvoltage protection. It features a low profile 2" x 4" footprint with a height of 1.28 inches, enabling use in space-constrained applications. The LPT102-M is approved for both ITE (commercial) and medical applications, holding safety certifications from TUV, UL, CSA, NEMKO, and others.</p><p>&nbsp;</p><p>The power supply supports chassis mount installation and operates over a temperature range of 0°C to 70°C with derating. EMI/RFI emissions meet FCC Class B and CISPR22 Class B standards. Built-in protections include short circuit and thermal overload.</p>

<p>The AXA00H18-L is a low-input isolated DC-DC converter from the Artesyn AXA series, offering 20 watts of output power. It features an ultra-wide 4:1 input voltage range of 9 to 36 Vdc, making it suitable for use with nominal 12V or 24V supplies. The single output delivers 24V at 835mA with high efficiency of 88%.</p><p>&nbsp;</p><p>Key electrical specifications include tight voltage tolerance of ±1%, line and load regulation of ±0.2%, and a maximum noise/ripple of 150mV. Protection features include hiccup mode overload and short circuit protection, as well as remote On/Off control. The converter operates at a switching frequency of 330KHz and provides 1500Vdc input/output isolation.</p><p>&nbsp;</p><p>The converter is housed in a compact 6-DIP through-hole package measuring 1.00 x 1.00 x 0.40 inches (25.4 x 25.4 x 10.2 mm) with an isolated metal baseplate. It is rated for operation over a wide temperature range of -40°C to +85°C and is designed for ITE (commercial) applications.</p>

<p>The DA12-050AU-M is a wall mount AC/DC adapter from Artesyn Embedded Power, delivering 5V at 2A (10W) with Level V efficiency. It features a fixed Australia AS 3112 input blade and a barrel plug output (2.5mm I.D. x 5.5mm O.D.) with positive center polarity. The adapter is rated for ITE (commercial) and medical applications, with CB and CE approvals.</p><p>&nbsp;</p><p>This Class II adapter operates over 0°C to 40°C and measures 60.0mm x 28.0mm x 54.3mm with a 1.5m output cord. Its compact wall mount design makes it suitable for low-power devices requiring a regulated 5VDC source.</p>

<p>The DS1100PED-3 is an AC/DC Front End converter from Artesyn Embedded Power, delivering a single 12V output at up to 91.6A with 1100W of total power. It accepts a universal input range of 90-264 VAC and achieves high efficiency of 94%.</p><p>&nbsp;</p><p>This rack-mountable module features hot-swappable capability, I²C interface, PMBus™ for digital power management, load sharing, remote sense, and a standby output. It includes power factor correction (PFC) and is designed for ITE (commercial) applications.</p><p>&nbsp;</p><p>Operating temperature range is 0°C to 60°C with derating. The compact size is 196.5mm x 86.3mm x 38.5mm (7.74" x 3.40" x 1.52"). It is CE approved and RoHS3 compliant.</p>

<p>The Artesyn Embedded Power LCB100L is a single-output AC to DC power supply with a total power rating of 100 Watts. It provides a 12V output voltage and can deliver up to 8.5A of current. This converter boasts an efficiency of 86%, making it suitable for various power conversion needs.</p><p>&nbsp;</p><p>Designed for reliability, the LCB100L operates within a specified input voltage range and features essential protections. Its compact form factor and robust design make it a versatile component for integration into different systems. The 100W power capability and 12V output are well-suited for applications requiring a stable and efficient DC power source from an AC input.</p><p>&nbsp;</p><p>Key electrical specifications include a total power of 100W, a single output, 12V output voltage, and 8.5A output current. The efficiency rating of 86% indicates good power conversion performance. Further details on input voltage range, operating temperature, and other environmental specifications can be found in the product's datasheet.</p>

<p>The Artesyn Embedded Power LCB150W is a 150W enclosed AC/DC power supply designed for various applications. It features a single output of 48V with an output current of 3.3A. The unit operates with a universal input voltage range of 88-132 Vac and 176-264 Vac, and an input frequency of 47-63 Hz.</p><p>&nbsp;</p><p>Key electrical specifications include a high efficiency of 90% and a hold-up time of greater than 25 ms. It is equipped with protections for short circuit, overload (&gt;105%), and overvoltage (115% to 150%). The output voltage is adjustable by ±10%.</p><p>&nbsp;</p><p>Environmental considerations include an operating temperature range of -25°C to 70°C with derating and a storage temperature range of -40°C to +85°C. The humidity range is 20 to 90% non-condensing. The power supply has undergone vibration testing up to 5G.</p><p>&nbsp;</p><p>This power supply is chassis mountable and has dimensions of 179.0mm in length, 98.0mm in width, and 38.0mm in height. It is suitable for ITE (Commercial) applications and carries CE approval.</p>

<p>The Artesyn Embedded Power LCB100W is an enclosed AC/DC converter with a total power output of 100W and a single output voltage of 48V. It is designed for a wide input voltage range of 88 to 264 Vac and operates at frequencies between 47 and 63 Hz. This converter boasts a high efficiency of 89% at full load and a low no-load power consumption of 0.5W.</p><p>&nbsp;</p><p>Key electrical features include adjustable output voltage within ±10%, overvoltage protection (OVP) at 115% to 150%, and overload protection (OCP) exceeding 110% of rated output power. It also features short circuit protection and a hold-up time of over 32 ms at 230 Vac.</p><p>&nbsp;</p><p>Designed for environmental resilience, the LCB100W operates within a temperature range of -25°C to 70°C with derating and has a storage temperature range of -40°C to 85°C. It can withstand vibration up to 5G.</p><p>&nbsp;</p><p>This converter is chassis mounted and suitable for ITE (Commercial) applications. It holds CE, UL, cUL 60950-1, and TUV 60950-1 safety approvals and meets EMI Class B standards.</p>