What are Heat Shrink Boots, Caps ?
Heat Shrink Boots, Caps are protective coverings designed to insulate and secure electrical connections. They are widely used in applications such as board-to-board and cable interconnects, as well as in production electronics assembly. Important specifications for selection include Color, which aids in identification; Material, which affects durability and heat resistance; and Large Diameter Recovered, which ensures a proper fit over connectors. Procurement teams should validate lifecycle status and consider alternate-source options to mitigate sourcing risks.
Parts in this category
Tap rows to select parts
Compare stocked parts across manufacturers and distributors, then add lines to your RFQ.
| Part & Mfr | Total Stock | Pricing & RFQ | Automotive Grade | Color | Features | Large Diameter Recovered | Large Diameter Supplied | Large Recovered Length | Material | Shell Size | Small Diameter Recovered | Small Diameter Supplied | Small Recovered Length | Total Length Recovered | Total Length Supplied | Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TE Connectivity
|
8
|
Price on request
8
|
- | Black | - | 2.280" (57.91mm) | 1.480" (37.59mm) | 1.252" (31.80mm) | Polyolefin (PO), Semi-Rigid | 52 | 0.421" (10.69mm) | 1.480" (37.59mm) | - | 2.402" (61.01mm) | - | Boot, Rectangular | |
|
TE Connectivity
|
7
|
Price on request
7
|
- | Black | Adhesive Coating, Fluid Resistant | 0.382" (9.70mm) | 0.760" (19.30mm) | 1.421" (36.09mm) | Elastomer, Semi-Rigid | 22 | 0.209" (5.31mm) | 0.370" (9.40mm) | 1.260" (32.00mm) | - | - | Boot, Transition - Breakout, 4:1 | |
TE Connectivity
<p>The TE Connectivity 234A011-3-0 is a heat shrinkable rectangular boot with a 90° right angle design, intended for use with connectors of shell size 11. It is molded from semi-rigid black polyolefin, a material commonly chosen for its balance of flexibility and mechanical protection in wire harness and cable assembly applications.</p><p> </p><p>Key dimensional specifications: the large end has a supplied inner diameter of 0.800" (20.32mm) and recovers to the same 0.800" (20.32mm), indicating a non-recovering large end. The small end is supplied at 0.311" (7.90mm) and recovers to 0.161" (4.09mm), providing a tight seal around wires or cables passing through the boot.</p><p> </p><p>This boot is designed to provide strain relief, environmental sealing, and electrical insulation at the backshell of circular connectors. The right angle configuration helps route cables in tight spaces where straight boots would not fit. The black color is standard for many industrial and military applications.</p>
|
7
|
Price on request
7
|
- | Black | - | 0.800" (20.32mm) | 0.800" (20.32mm) | - | Polyolefin (PO), Semi-Rigid | 11 | 0.161" (4.09mm) | 0.311" (7.90mm) | - | - | - | Boot, Rectangular - Right Angle, 90° | |
TE Connectivity
|
6
|
Price on request
6
|
- | Black | - | 0.882" (22.40mm) | 1.420" (36.07mm) | 1.496" (38.00mm) | Polyolefin (PO), Semi-Rigid | 52 | 0.331" (8.41mm) | 1.420" (36.07mm) | 0.984" (24.99mm) | 1.810" (45.97mm) | - | Boot - 90° | |
TE Connectivity
|
6
|
Price on request
6
|
- | Black | - | 0.520" (13.21mm) | 1.060" (26.92mm) | 1.690" (42.93mm) | Polyolefin (PO), Semi-Rigid | 23 | 0.272" (6.91mm) | 0.520" (13.21mm) | 1.980" (50.29mm) | 3.669" (93.19mm) | - | Boot, Transition - Breakout, 3:1 | |
|
TE Connectivity
|
5
|
Price on request
5
|
- | Black | Shielded | 0.559" (14.20mm) | 0.941" (23.90mm) | 1.102" (27.99mm) | Elastomer/Copper Composite | 32 | 0.236" (5.99mm) | 0.591" (15.01mm) | 0.670" (17.02mm) | 2.362" (59.99mm) | 2.362" (59.99mm) | Boot | |
|
TE Connectivity
<p>This TE Connectivity heat shrink boot (shell size 63) is molded from a semi-flexible, halogen-free polyolefin material in black. The boot is supplied with a large diameter of 1.690" (42.93mm) and a small diameter of 0.984" (24.99mm). After recovery, the large diameter reduces to 1.110" (28.19mm) and the small diameter to 0.390" (9.91mm). The total recovered length is 3.898" (99.01mm), with a large end recovered length of 2.402" (61.01mm) and a small end recovered length of 1.180" (29.97mm).</p><p> </p><p>It includes an adhesive coating and a lip feature to enhance sealing and strain relief in cable termination and connector backshell applications. The halogen-free material offers improved environmental performance. This boot is designed to provide mechanical protection and environmental sealing for connectors and cables in demanding applications.</p>
|
5
|
Price on request
5
|
No | Black | Adhesive Coating, Lip | 1.110" (28.19mm) | 1.690" (42.93mm) | 2.402" (61.01mm) | Polyolefin (PO), Semi-Flexible, Halogen Free | 63 | 0.390" (9.91mm) | 0.984" (24.99mm) | 1.180" (29.97mm) | 3.898" (99.01mm) | - | Boot | |
|
TE Connectivity
|
5
|
Price on request
5
|
- | Black | - | 0.800" (20.32mm) | 0.800" (20.32mm) | 0.728" (18.49mm) | Elastomer, Semi-Rigid | 11 | 0.161" (4.09mm) | 0.311" (7.90mm) | - | - | - | Boot - 90° | |
TE Connectivity
|
5
|
Price on request
5
|
- | Black | Adhesive Coating | 0.539" (13.69mm) | 1.060" (26.92mm) | 2.752" (69.90mm) | Elastomer, Semi-Rigid | 34 | 0.240" (6.10mm) | 0.520" (13.21mm) | 2.110" (53.59mm) | 5.701" (144.81mm) | - | Boot, Transition - Side Breakout, 45° | |
TE Connectivity
|
5
|
Price on request
5
|
- | Black | - | 0.240" (6.10mm) | 0.520" (13.21mm) | 0.882" (22.40mm) | Elastomer, Semi-Rigid | 12 | 0.130" (3.30mm) | 0.260" (6.60mm) | 0.760" (19.30mm) | - | - | Boot, Transition - Breakout, 2:1 (Y) | |
TE Connectivity
|
5
|
Price on request
5
|
- | Black | Adhesive Coating, Fluid Resistant | 0.710" (18.03mm) | 1.220" (30.99mm) | 1.220" (30.99mm) | Elastomer, Semi-Rigid | 42 | 0.280" (7.11mm) | 1.220" (30.99mm) | 0.790" (20.07mm) | 1.540" (39.12mm) | - | Boot - 90° | |
|
TE Connectivity
|
4
|
Price on request
4
|
- | Black | - | 0.450" (11.43mm) | 1.350" (34.29mm) | 2.370" (60.20mm) | Fluoropolymer | 12 | 0.450" (11.43mm) | 0.900" (22.86mm) | 2.370" (60.20mm) | 4.740" (120.40mm) | - | Boot, Transition - Breakout, 2:1 (T) | |
TE Connectivity
|
4
|
Price on request
4
|
- | Black | Abrasion Resistant, Adhesive Coating, Corrosion Resistant, Flame Retardant, Weather Resistant | 0.984" (24.99mm) | 1.750" (44.45mm) | 2.300" (58.42mm) | Polyolefin (PO), Semi-Rigid | - | 0.260" (6.60mm) | 0.790" (20.07mm) | 1.181" (30.00mm) | - | - | Boot, Transition - Breakout, 4:1 | |
TE Connectivity
|
4
|
Price on request
4
|
- | Black | - | 0.272" (6.91mm) | 0.520" (13.21mm) | 0.902" (22.91mm) | Elastomer, Semi-Rigid | 12 | 0.142" (3.61mm) | 0.260" (6.60mm) | 0.921" (23.39mm) | 1.941" (49.30mm) | - | Boot, Transition - Side Breakout, 45° | |
TE Connectivity
|
4
|
Price on request
4
|
- | Black | Adhesive Coating | 0.260" (6.60mm) | 0.780" (19.81mm) | 1.600" (40.64mm) | Polyolefin (PO), Flexible | 1 | 0.260" (6.60mm) | 0.520" (13.21mm) | 1.600" (40.64mm) | - | - | Boot, Transition - Breakout, 2:1 (Y) | |
3M Electronic Solutions
|
3
|
Price on request
3
|
- | Black | Adhesive Coating, Flame Retardant | 0.370" (9.40mm) | 0.800" (20.32mm) | - | Polyolefin (PO), Semi-Rigid | - | 0.110" (2.79mm) | 0.330" (8.38mm) | 0.700" (17.78mm) | 2.700" (68.58mm) | - | Boot, Transition - Breakout, 2:1 | |
TE Connectivity
|
3
|
Price on request
3
|
- | Black | - | 0.260" (6.60mm) | 0.520" (13.21mm) | 0.819" (20.80mm) | Elastomer, Semi-Rigid | 11 | 0.142" (3.61mm) | 0.260" (6.60mm) | 1.000" (25.40mm) | 1.819" (46.20mm) | - | Boot, Transition - Breakout, 3:1 | |
TE Connectivity
|
3
|
Price on request
3
|
- | Black | - | 0.520" (13.21mm) | 1.060" (26.92mm) | 1.690" (42.93mm) | Elastomer, Semi-Rigid | 23 | 0.272" (6.91mm) | 0.520" (13.21mm) | 1.980" (50.29mm) | 3.669" (93.19mm) | - | Boot, Transition - Breakout, 3:1 | |
TE Connectivity
<p>The 202D921-25/225-0 is a heat shrink boot manufactured by TE Connectivity. It is designed for shell size 21 and comes in black. The boot is constructed from semi-rigid, irradiated elastomer, providing abrasion, chemical, fluid, and heat resistance, along with flame retardancy. It features an adhesive coating and a lip for strain relief.</p><p> </p><p>In its supplied state, the large diameter measures 0.760 in (19.30 mm) and recovers to 0.512 in (13.00 mm). The small diameter supplied is 0.250 in (6.35 mm) and recovers to 0.083 in (2.11 mm). The total recovered length is 2.370 in (60.20 mm), with a large recovered length of 0.618 in (15.70 mm) and a small recovered length of 1.480 in (37.59 mm).</p><p> </p><p>This boot is suitable for applications requiring environmental sealing and mechanical protection of cable assemblies and connectors. The adhesive coating ensures a secure bond upon heat recovery, while the semi-rigid material provides structural integrity.</p>
|
2
|
Price on request
2
|
- | Black | Abrasion Resistant, Adhesive Coating, Chemical Resistant, Flame Retardant, Fluid Resistant, Heat Resistant, Lip, Strain Resist | 0.512 in (13.00 mm) | 0.760 in (19.30 mm) | 0.618 in (15.70 mm) | Elastomer, Semi-Rigid, Irradiated | 21 | 0.083 in (2.11 mm) | 0.250 in (6.35 mm) | 1.480 in (37.59 mm) | 2.370 in (60.20 mm) | - | Boot | |
TE Connectivity
|
2
|
Price on request
2
|
- | Black | Abrasion Resistant, Chemical Resistant, Flame Retardant, Fluid Resistant, Heat Resistant, Strain Resistant | 0.531" (13.49mm) | 1.060" (26.92mm) | 2.370" (60.20mm) | Elastomer, Semi-Rigid, Irradiated | 34 | 0.531" (13.49mm) | 1.060" (26.92mm) | 2.362" (59.99mm) | 4.728" (120.09mm) | - | Boot, Transition - Breakout, 2:1 (T) | |
|
TE Connectivity
|
2
|
Price on request
2
|
- | Black | - | 0.260" (6.60mm) | 0.520" (13.21mm) | 0.819" (20.80mm) | Elastomer, Semi-Rigid | 11 | 0.142" (3.61mm) | 0.260" (6.60mm) | 1.000" (25.40mm) | 1.819" (46.20mm) | - | Boot, Transition - Breakout, 3:1 | |
TE Connectivity
|
2
|
Price on request
2
|
- | Black | - | 0.500" (12.70mm) | 1.060" (26.92mm) | 1.618" (41.10mm) | Elastomer, Semi-Rigid | 24 | 0.142" (3.61mm) | 0.260" (6.60mm) | 1.409" (35.79mm) | 3.642" (92.51mm) | - | Boot, Transition - Side Breakout, 45° | |
|
TE Connectivity
|
1
|
Price on request
1
|
- | - | - | - | - | - | - | - | - | - | - | - | - | - | |
TE Connectivity
<p>The TE Connectivity 202A132-3-0 is a heat shrink boot designed for cable and wire management applications. It is made from polyolefin (PO) semi-rigid material and is black in color. The boot is size 32 and features a flame retardant property. In its supplied state, the boot has a large and small diameter of 28.4mm. After recovery, the large diameter reduces to 14.2mm and the small diameter to 6.6mm. The total recovered length is 51.31mm, with a large recovered length of 27.89mm and a small recovered length of 16.0mm. This boot is suitable for providing strain relief and environmental sealing at cable terminations. It is RoHS3 compliant and has an MSL of 1 (unlimited). The semi-rigid polyolefin material provides good mechanical protection and resistance to abrasion. The boot's design allows for a transition from a larger cable diameter to a smaller one, making it ideal for connector backshells or cable entry points.</p>
|
1
|
Price on request
1
|
- | Black | Flame Retardant | 0.559" (14.20mm) | 1.118" (28.40mm) | 1.098" (27.89mm) | Polyolefin (PO), Semi-Rigid | 32 | 0.260" (6.60mm) | 1.118" (28.40mm) | 0.630" (16.00mm) | 2.020" (51.31mm) | - | Boot | |
TE Connectivity
|
1
|
Price on request
1
|
- | Black | Adhesive Coating | 0.402" (10.21mm) | 0.980" (24.89mm) | 0.890" (22.61mm) | Polyolefin (PO), Semi-Rigid | 21 | 0.209" (5.31mm) | 0.980" (24.89mm) | 0.579" (14.71mm) | - | - | Boot - 90° | |
TE Connectivity
<p>The TE Connectivity 202D142-3-0 is a heat shrink boot designed for cable and wire management applications. It is made from semi-rigid polyolefin (PO) material and comes in a black color. This boot is intended for shell size 42.</p><p> </p><p>Key mechanical specifications include a supplied large diameter of 30.99mm (1.220") which recovers to 17.81mm (0.701"). The supplied small diameter is also 30.99mm (1.220") and recovers to 7.19mm (0.283"). The total recovered length is 66.80mm (2.630"), with a large recovered length of 35.31mm (1.390") and a small recovered length of 24.51mm (0.965").</p><p> </p><p>This boot provides environmental sealing and strain relief for cable terminations and connectors. Its semi-rigid construction offers durability and shape retention after heat application. It is suitable for use in various industrial and commercial cable management systems.</p>
|
1
|
Price on request
1
|
- | Black | - | 0.701" (17.81mm) | 1.220" (30.99mm) | 1.390" (35.31mm) | Polyolefin (PO), Semi-Rigid | 42 | 0.283" (7.19mm) | 1.220" (30.99mm) | 0.965" (24.51mm) | 2.630" (66.80mm) | - | Boot | |
TE Connectivity
<p>This heat shrink boot by TE Connectivity is designed for shell size 42 applications. It is molded from a semi-rigid elastomer material in black and includes a lip feature for secure fitment.</p><p> </p><p>Key dimensions include a supplied large and small diameter of 1.220" (30.99mm), a recovered large diameter of 0.710" (18.03mm), and a recovered small diameter of 0.280" (7.11mm). Total recovered length is 1.850" (46.99mm), with a large recovered length of 0.591" (15.01mm) and a small recovered length of 0.670" (17.02mm).</p><p> </p><p>The boot is fluid resistant, making it suitable for environments where exposure to oils or solvents may occur. It provides mechanical protection and strain relief for cable and connector transitions.</p>
|
1
|
Price on request
1
|
Yes | Black | Fluid Resistant, Lip | 0.710" (18.03mm) | 1.220" (30.99mm) | 0.591" (15.01mm) | Elastomer, Semi-Rigid | 42 | 0.280" (7.11mm) | 1.220" (30.99mm) | 0.670" (17.02mm) | 1.850" (46.99mm) | - | Boot | |
TE Connectivity
|
1
|
Price on request
1
|
- | Black | Fluid Resistant, Lip | 0.710" (18.03mm) | 1.220" (30.99mm) | 1.380" (35.05mm) | Polyolefin (PO), Semi-Flexible, Halogen Free | 42 | 0.280" (7.11mm) | 0.710" (18.03mm) | 0.984" (24.99mm) | 2.640" (67.06mm) | - | Boot | |
TE Connectivity
|
1
|
Price on request
1
|
- | Black | Flame Retardant, Lip | 1.110" (28.19mm) | 1.690" (42.93mm) | 2.402" (61.01mm) | Polyolefin (PO), Semi-Rigid | 63 | 0.390" (9.91mm) | 1.690" (42.93mm) | 1.180" (29.97mm) | 3.898" (99.01mm) | - | Boot | |
|
TE Connectivity
|
1
|
Price on request
1
|
- | Black | - | 0.539" (13.69mm) | 1.060" (26.92mm) | 2.752" (69.90mm) | Elastomer, Semi-Rigid | 34 | 0.240" (6.10mm) | 0.520" (13.21mm) | 2.110" (53.59mm) | 5.701" (144.81mm) | - | Boot, Transition - Side Breakout, 45° | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.690" (17.53mm) | 1.340" (34.04mm) | - | EPB | 32 | 0.500" (12.70mm) | 1.060" (26.92mm) | 0.882" (22.40mm) | 5.752" (146.10mm) | - | Boot | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.488" (12.40mm) | 1.060" (26.92mm) | 1.500" (38.10mm) | Polyolefin (PO), Semi-Flexible | 23 | 0.240" (6.10mm) | 0.520" (13.21mm) | 1.700" (43.18mm) | - | - | Boot, Transition - Breakout, 2:1 (Y) | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Fluid Resistant | 0.311" (7.90mm) | 0.670" (17.02mm) | 0.551" (14.00mm) | Elastomer, Semi-Rigid | 11 | 0.090" (2.29mm) | 0.670" (17.02mm) | 0.236" (5.99mm) | 0.984" (24.99mm) | - | Boot | |
3M Electronic Solutions
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Adhesive Coating, Flame Retardant | 0.430" (10.92mm) | 0.900" (22.86mm) | - | Polyolefin (PO), Semi-Rigid | - | 0.110" (2.79mm) | 0.280" (7.11mm) | 0.750" (19.05mm) | 2.750" (69.85mm) | - | Boot, Transition - Breakout, 4:1 | |
|
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.260" (6.60mm) | 0.520" (13.21mm) | 0.819" (20.80mm) | Elastomer, Semi-Rigid | 11 | 0.142" (3.61mm) | 0.260" (6.60mm) | 1.000" (25.40mm) | 1.819" (46.20mm) | - | Boot, Transition - Breakout, 3:1 | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Adhesive Coating, Fluid Resistant | 0.311" (7.90mm) | 0.650" (16.51mm) | 0.559" (14.20mm) | Elastomer, Semi-Rigid | 11 | 0.150" (3.81mm) | 0.469" (11.91mm) | - | 1.000" (25.40mm) | - | Boot | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Abrasion Resistant, Adhesive Coating, Flame Retardant, Fluid Resistant, Moisture Resistant, Strain Resistant | 0.065" (1.65mm) | 0.293" (7.44mm) | - | Polyolefin (PO), Semi-Rigid | - | - | - | - | - | 1.180" (29.97mm) | Cap | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Adhesive Coating, Fluid Resistant | 0.559" (14.20mm) | 1.180" (29.97mm) | 1.060" (26.92mm) | Elastomer, Semi-Rigid | 32 | 0.232" (5.89mm) | 1.180" (29.97mm) | 0.790" (20.07mm) | 1.260" (32.00mm) | - | Boot - 90° | |
|
Parker Chomerics
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Lip | 0.560" (14.22mm) | 1.120" (28.45mm) | 1.070" (27.18mm) | Polyolefin (PO) | - | 0.260" (6.60mm) | 1.120" (28.45mm) | 0.650" (16.51mm) | 1.330" (33.78mm) | - | Boot - 90° | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.260" (6.60mm) | 0.520" (13.21mm) | 0.819" (20.80mm) | Polyolefin (PO), Flexible | 11 | 0.142" (3.61mm) | 0.260" (6.60mm) | 1.000" (25.40mm) | 1.819" (46.20mm) | - | Boot, Transition - Breakout, 3:1 | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.311" (7.90mm) | 0.701" (17.81mm) | 0.791" (20.10mm) | Elastomer, Semi-Rigid | 11 | 0.150" (3.81mm) | 0.701" (17.81mm) | 0.449" (11.40mm) | - | - | Boot - 90° | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Abrasion Resistant, Adhesive Coating, Flame Retardant, Fluid Resistant, Moisture Resistant, Strain Resistant | 0.050" (1.27mm) | 0.225" (5.72mm) | - | Polyolefin (PO), Semi-Rigid | - | - | - | - | - | 1.380" (35.05mm) | Cap | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.240" (6.10mm) | 0.520" (13.21mm) | 0.882" (22.40mm) | Polyolefin (PO), Semi-Rigid | 12 | 0.130" (3.30mm) | 0.260" (6.60mm) | 0.760" (19.30mm) | - | - | Boot, Transition - Breakout, 2:1 (Y) | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.240" (6.10mm) | 0.520" (13.21mm) | 0.882" (22.40mm) | Polyolefin (PO), Flexible | 12 | 0.130" (3.30mm) | 0.260" (6.60mm) | 0.760" (19.30mm) | - | - | Boot, Transition - Breakout, 2:1 (Y) | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Fluid Resistant, Lip | 0.272" (6.91mm) | 0.670" (17.02mm) | 0.941" (23.90mm) | Elastomer, Semi-Rigid | 11 | 0.118" (3.00mm) | 0.670" (17.02mm) | 0.425" (10.80mm) | 1.540" (39.12mm) | - | Boot | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.559" (14.20mm) | 1.180" (29.97mm) | 1.060" (26.92mm) | Elastomer, Semi-Rigid | 32 | 0.232" (5.89mm) | 1.180" (29.97mm) | 0.790" (20.07mm) | 1.260" (32.00mm) | - | Boot - 90° | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.402" (10.21mm) | 0.980" (24.89mm) | 0.890" (22.61mm) | Elastomer, Semi-Rigid | 21 | 0.209" (5.31mm) | 0.980" (24.89mm) | 0.579" (14.71mm) | - | - | Boot - 90° | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | - | 0.362" (9.19mm) | 0.941" (23.90mm) | 0.830" (21.08mm) | Elastomer, Semi-Rigid | 11 | 0.110" (2.79mm) | 0.630" (16.00mm) | 0.394" (10.01mm) | 1.496" (38.00mm) | - | Boot | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | - | - | 0.370" (9.40mm) | 0.800" (20.32mm) | 2.000" (50.80mm) | - | - | 0.118" (3.00mm) | 0.330" (8.38mm) | 0.700" (17.78mm) | - | - | Boot, Transition - Breakout, 2:1 | |
TE Connectivity
|
Send RFQ |
Price on request
Price and Stock
on Request Send RFQ |
- | Black | Adhesive Coating, Flame Retardant, Fluid Resistant, Heat Resistant, Strain Resistant | 0.142" (3.61mm) | 0.260" (6.60mm) | 0.594" (15.09mm) | Polyolefin (PO), Flexible, Irradiated | 11 | 0.142" (3.61mm) | 0.260" (6.60mm) | 0.579" (14.71mm) | 1.169" (29.69mm) | - | Boot, Transition - Breakout, 2:1 (T) |
Showing 51-100 of 5,500 products