Weidmüller

<p>The Weidmüller 1610220000 is a wire-to-board terminal block designed for through-hole PCB mounting. It features 4 positions with a single level and a pitch of 10.16mm (0.400 inches). The termination style is screw-clamping yoke with tension sleeve, suitable for wire gauges from 8 to 26 AWG.</p><p>&nbsp;</p><p>Rated for 40A continuous current and 300V voltage, this terminal block is suitable for high-power applications. The housing is gray and includes side interlocking for secure multi-pole assembly. The mating orientation is vertical with the board, allowing for top-entry wiring.</p><p>&nbsp;</p><p>This terminal block is listed as RoHS3 compliant, REACH unaffected, and has an MSL of 1, though these compliance values are unverified. Note: The datasheet and manufacturer page for this specific part number were not available, and the fetched datasheet corresponds to a different 3-position part.</p>

<p>The Weidmüller LU 10.16/3/90 2STI/4.5 (MPN 1648300000) is a 3-position, single-level PCB terminal block from the LU 10.16 series. It features a pitch of 10.16mm (0.400 inches) and a 90-degree wire entry orientation relative to the board.</p><p>&nbsp;</p><p>The terminal block uses a clamping yoke connection system rated for 65A continuous current at 300V, with an enhanced rated current of 72-76A at 20°C ambient. The wire range spans 6 to 26 AWG (0.14 to 16 mm²). The contact material is tinned electrolytic copper (E-Cu), and the solder pin length is 4.5mm for robust PCB attachment.</p><p>&nbsp;</p><p>Constructed with Wemid (PA) insulating material meeting UL 94 V-0 flammability class, the part offers a CTI of ≥600 and passes a 960°C glow-wire test. Side interlocking allows combining multiple blocks for higher pole counts. The unit is packaged in quantities of 20 pieces.</p>

<p>The Weidmüller 1876860000 is a 3-position terminal block header designed for reliable wire-to-board connections. It features a shrouded (4 side) male pin configuration with a 5.08mm pitch, making it suitable for industrial control and power distribution applications. The header is oriented at 90 degrees (right angle) and mounts under the board, with through hole solder termination for secure attachment. Electrical ratings include 18.5A current and 300V voltage, with an operating temperature range of -50°C to 100°C. The contact mating finish is tin, and the housing is black. Additional features include a mating flange for secure connector locking and solder retention for improved mechanical stability during assembly. This component is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The Weidmüller 1581340000 (SL 5.00/4/180 3.2SN OR) is a 4-position PCB plug-in connector header designed for through hole soldering. It features a 5.00mm pitch, vertical orientation, and a shrouded (2 side) design for secure mating. The header is rated for 300V and 15A, with tin-plated copper-tin contacts and a PBT insulating material rated UL 94 V-0.</p><p>&nbsp;</p><p>This connector is part of the SL 5.00/180 series and is suitable for use in industrial control, power distribution, and building automation applications. It supports a rated voltage of 300V (UL/CSA Use Group D) and a rated current of 10A under UL/CSA conditions. The operating temperature range is -25°C to 100°C, with a storage temperature range of -25°C to 55°C.</p><p>&nbsp;</p><p>The header is packaged in a box of 100 pieces. It is designed for solder connection to a PCB and can be coded for keyed mating. The insulating material is PBT with a flammability rating of UL 94 V-0.</p>

<p>This Weidmüller OMNIMATE Signal LMZF series terminal block is a 2-position wire-to-board connector with a 5.00mm pitch and 45° (135°) mating angle relative to the PCB. It utilizes a screwless spring cage (tension clamp) termination for fast and reliable wire connections without tools. The through-hole mounting ensures a secure solder connection on the PCB.</p><p>&nbsp;</p><p>Electrical ratings are 300V/15A per UL and 630V/24A per IEC, accepting wire sizes from 14 to 26 AWG (0.13-2.5 mm²). The housing is made of orange Wemid (PA) material with UL 94 V-0 flammability rating, offering long-term temperature resistance up to 120°C. The contacts are copper alloy with 5-8 µm matte tin plating.</p><p>&nbsp;</p><p>Mechanical dimensions: width 12.5mm, height 16.4mm, depth 14.5mm. Solder pins are 0.8x0.8mm square with a 3.5mm length. A side interlocking feature allows ganging multiple blocks for higher pole counts. Supplied in a box of 100 units.</p>

<p>The Weidmüller 1690310000 is a 14-position plug designed for use in terminal block systems. It features a 3.50mm pitch and a screwless tension clamp connection system, allowing for quick and tool-free wire termination. The plug accepts solid or stranded conductors from 0.13 to 1.5 mm² (28-16 AWG) with a stripping length of 10 mm.</p><p>&nbsp;</p><p>Electrically, the plug is rated for 10 A at 20°C and 300 V (rated voltage 320 V for overvoltage class II/pollution severity 2). Impulse withstand voltage is 2.5 kV. The operating temperature range is -50°C to 100°C. The plug is suitable for free hanging (in-line) mounting and features a 180° wire entry angle.</p><p>&nbsp;</p><p>Constructed with PBT insulating material rated UL 94 V-0, the plug offers good flammability resistance. Contacts are made of tinned copper alloy for reliable conductivity. The orange color (similar to RAL 2000) aids visual identification. Standard packaging is 50 pieces per box.</p>

<p>This Weidmüller 1594470000 is a 3 position wire to board terminal block featuring a single level with 7.62mm pitch. The mating orientation is horizontal with the board, and it uses side entry for wire insertion. The wire termination is via screw type with clamping yoke and tension sleeve, ensuring secure connections.</p><p>&nbsp;</p><p>Rated for 20A current and 300V voltage, this terminal block accepts wire gauges from 12 to 26 AWG. It includes a side interlocking feature for stacking multiple blocks. The body is orange in color.</p><p>&nbsp;</p><p>Mounting is through hole, making it suitable for PCB integration. It is compliant with RoHS3 and REACH, and has an MSL of 1 unlimited (all unverified). The part number is also available as DigiKey 281-5689-ND.</p>

<p>The Weidmüller 1524460000 is a 5-position terminal block header from the SL 5.08 series. It features a vertical orientation with shrouded male pins on a 5.08mm pitch. The header is rated for 15A current and 300V voltage, making it suitable for power distribution and signal interconnection in industrial control systems.</p><p>&nbsp;</p><p>The component uses through hole mounting with solder termination and has a solder pin length of 4.5mm. The orange housing provides visual identification. It operates over a temperature range of -20°C to 100°C. The tin-plated contacts ensure reliable electrical connections.</p>

<p>This Weidmüller DFFC series contact is a socket-style crimp terminal designed for use in PCB plug-in connector systems with a system pitch of 5.00/5.08mm (0.197/0.200 inch). The contact features a tin finish suitable for many general-purpose interconnection applications.</p><p>&nbsp;</p><p>The part designation DFFC 0.5-1.0 SN 3000 indicates a socket contact accommodating wire sizes in the 0.5-1.0mm² range, with tin plating. It is supplied in quantities of 3000 pieces per standard package, making it appropriate for medium to large production runs.</p><p>&nbsp;</p><p>Classified as EC001284 per ETIM 3.0, this component is listed as a terminal block contact accessory. No specific mounting or housing details are provided in the available data.</p>

<p>The Weidmüller 1812430000 is a 2-position shrouded header designed for terminal block applications. It features a 5.08mm pitch and right angle orientation, making it suitable for compact PCB layouts. The header uses through hole mounting with solder termination and tin-plated contacts for reliable connections. It is rated for 15A current and 300V voltage, with an operating temperature range of -50°C to 100°C. The side interlocking feature allows secure stacking of multiple headers. The black housing provides clear visual identification.</p>

<p>The Weidmüller 1753014001 is a 5-position terminal block header with male pins and a shrouded (4 side) design. It features a single level with 5 positions per level and a 3.50mm pitch. The header is oriented vertically and uses through hole mounting with solder termination. The contact mating finish is tin, providing reliable electrical connections. Electrical ratings include 10A current and 300V voltage, with an operating temperature range of -20°C to 100°C. The housing is black. This header is suitable for industrial control and PCB connection applications where a compact, robust interface is required.</p>

<p>The Weidmüller 1524810000 is a 9-position terminal block header designed for reliable wire-to-board connections. It features a shrouded (4-sided) design for enhanced protection and polarization. The header has a single level with 9 positions per level at a 5.08mm pitch, making it suitable for high-density applications. It is mounted through hole with solder termination, ensuring a secure mechanical and electrical connection. The vertical orientation allows for straightforward PCB layout. Rated for 300V and 15A, it operates over a temperature range of -20°C to 100°C. The contact mating finish is tin, providing good conductivity and corrosion resistance. The header is black in color and comes in a standard package quantity of 50.</p>

<p>The Weidmüller 1526460000 is a 2-position plug terminal block with female sockets, designed for reliable wire connections in industrial control systems. It features a 5.08mm pitch and accepts wire sizes from 0.2 to 2.5mm² using a screw-clamping yoke (tension sleeve) termination. The plug is rated for 15A and 300V, with an operating temperature range of -50°C to 100°C. It is orange in color with tin-plated contacts and includes retention latches on the non-wire side for secure mating. The free hanging (in-line) mounting style allows flexible installation without a mounting rail. This plug is suitable for use with corresponding headers in terminal block systems.</p>

<p>The Weidmüller 1752984002 is a 2-position terminal block header designed for reliable wire-to-board connections. It features a shrouded (4 side) male pin design with a 3.50mm pitch, making it suitable for compact PCB layouts.</p><p>&nbsp;</p><p>This header is rated for 10A current and 300V voltage, with an operating temperature range of -50°C to 100°C. The through hole mounting and solder termination ensure a robust mechanical and electrical connection.</p><p>&nbsp;</p><p>Contact mating finish is tin, providing good solderability and corrosion resistance. The black housing offers clear visual identification. This component is commonly used in industrial control, automation, and power distribution applications.</p>

<p>This Weidmüller 1426600000 is a gold-plated crimp pin contact designed for 16-18 AWG wire. The contact is made from copper alloy, ensuring good conductivity and reliability. The crimp termination provides a secure mechanical and electrical connection, suitable for automated assembly. The gold finish offers excellent corrosion resistance and high mating cycle durability. This contact is part of Weidmüller's connector system family, ideal for industrial applications where vibration resistance and high connection density are required.</p>

<p>The Weidmüller 1526960000 (BLZ 5.08/7 SN OR) is a 7-position PCB plug-in connector from the BLZ 5.08/180 series. It features female sockets with a clamping yoke (tension sleeve) termination system, designed for reliable conductor connection. The connector has a pitch of 5.08 mm and accepts wire gauges from 26 AWG to 12 AWG (0.13 mm² to 3.31 mm²).</p><p>&nbsp;</p><p>This plug connector is rated for 15 A current and 300 V voltage (UL/CSA use group D). It offers a rated impulse withstand voltage of 4 kV and is suitable for overvoltage class II/2 up to 400 V. The operating temperature range is -50°C to 100°C.</p><p>&nbsp;</p><p>The connector is housed in orange PBT insulating material with UL 94 V-0 flammability rating. Contacts are made of copper alloy with tin plating. It includes retention latches on the non-wire side for secure mating. The free hanging (in-line) mounting style and 180° wire entry simplify installation in various applications.</p>