TE Connectivity

<p>The TE Connectivity 745175-1 is a two piece D-Sub backshell designed for 50 position connectors. It features a 180° cable exit and is fully shielded with nickel over copper plating on a zinc alloy body. The backshell includes assembly hardware and strain relief, and comes with 4-40 mating screws for secure attachment. It accommodates round cables and has a silver color finish. This backshell provides mechanical protection and EMI/RFI shielding for D-Sub cable assemblies in industrial and data communication applications.</p>

<p>The TE Connectivity 2170806-6 is a QSFP28 cage assembly designed for high-speed data transmission. It features a ganged 1x2 configuration with an integrated heat sink for thermal management. The cage supports data rates up to 28 Gbps NRZ and 56 Gbps PAM-4, making it suitable for 100 Gigabit Ethernet and InfiniBand EDR applications. It is EMI shielded to ensure signal integrity. The connector is mounted through hole, right angle orientation, with press-fit termination for reliable PCB attachment. This cage is part of TE's QSFP28/56 and zQSFP+ interconnect portfolio, offering backward compatibility with QSFP+ cables and transceivers.</p>

<p>The TE Connectivity 2315050-1 is a ZQSFP+ cage assembly designed for high-density pluggable connector applications. It features a ganged 1x2 configuration, allowing two module positions in a single housing. The connector uses press-fit termination and is mounted through hole at a right angle orientation.</p><p>&nbsp;</p><p>This cage is EMI shielded to reduce electromagnetic interference in high-speed signal environments. An integrated light pipe provides visual status indication for each port. The right angle design supports a low-profile layout on the PCB.</p><p>&nbsp;</p><p>Typical applications include data center switches, routers, and high-performance computing equipment requiring ZQSFP+ form factor transceivers.</p>

<p>The TE Connectivity 206966-1 is a backshell with integrated cable clamp designed for use with circular connectors of shell size 13. It provides a 180° cable exit for straight cable routing and accommodates cables up to 0.453" (11.51mm) in diameter. The 3/4-20 UNEF thread ensures secure attachment to the connector body. Constructed from black thermoplastic, this backshell includes clamp screws for effective strain relief and cable retention. It is suitable for applications requiring reliable cable management and protection in industrial, commercial, and telecommunications environments. No electrical ratings apply as this is a mechanical accessory.</p>

<p>The B-058-01 from TE Connectivity is a wire-to-wire solder sleeve designed for reliable splicing and sealing of wire connections. It features a transparent-blue color, allowing for visual inspection of the solder joint. The sleeve comes with a pre-installed lead wire for easy and efficient installation. It is designed to accommodate wire diameters ranging from 0.175 to 0.195 inches (4.45 to 4.95 mm) and has a length of 16.51 mm (0.650 inches). This solder sleeve is suitable for various cable management applications, including wire harness assembly and telecommunications wiring. Its wire-to-wire configuration makes it ideal for connecting two wires end-to-end.</p>

<p>This heat shrink boot from TE Connectivity is designed for shell size 21 applications. It is constructed from semi-rigid polyolefin material in black, featuring an adhesive coating that provides a reliable environmental seal and flame retardant properties for enhanced safety.</p><p>&nbsp;</p><p>The boot has a supplied inner diameter of 24.61mm on both ends. After heat application, the large end recovers to 9.91mm and the small end to 5.31mm. The total recovered length is 38.10mm, with the large section recovering to 21.79mm. These dimensions make it suitable for sealing and strain relief on cables and connectors.</p><p>&nbsp;</p><p>Typical applications include military, aerospace, and industrial environments where protection against moisture, dust, and mechanical stress is required. The adhesive coating ensures a tight bond to cable jackets and connector backshells.</p>

<p>This TE Connectivity FASTON receptacle terminal is a non-insulated, female quick disconnect designed for 0.187" (4.75mm) male tabs. It accepts 15.5 to 20 AWG wire and is terminated using a standard crimp tool. The contact is made from brass with a tin finish, providing good conductivity and corrosion resistance. It is intended for free-hanging (in-line) applications and is supplied as loose pieces.</p><p>&nbsp;</p><p>This terminal is part of the industry-standard FASTON series and is suitable for a wide range of power and signal interconnection tasks where a reliable, disconnectable connection is needed. Its compact 16.00mm length makes it suitable for space-constrained wiring harnesses.</p>

<p>The TE Connectivity 1955491-1 is a modular connector jack for RJ45 Ethernet applications. It features 8 positions and 8 contacts (8P8C) in a single port with a right angle orientation. The surface mount package uses solder termination. Shielding with an EMI finger provides electromagnetic interference protection. The contacts are gold-plated phosphor bronze for durability. The board guide assists in proper alignment during assembly. This jack has no LED indicators and is suitable for use in networking equipment where reliable Ethernet connections are required. The right angle orientation allows side entry of the cable, making it ideal for space-constrained designs.</p>

<p>The TE Connectivity 5-103957-9 is a 10-position, single row IDC receptacle designed for use with discrete or ribbon cable. It features a female socket contact type with a gold finish of 15.0µin (0.38µm) for reliable signal integrity. The connector employs IDC (Insulation Displacement Connection) termination and accommodates wire gauges from 22 to 26 AWG.</p><p>&nbsp;</p><p>This free hanging (in-line) receptacle uses a latch lock fastening system for secure mating. The closed end design provides strain relief and prevents wire exposure. The connector body is black and is suitable for use with 2.54mm (0.100") pitch ribbon cable or discrete wires.</p><p>&nbsp;</p><p>Typical applications include internal wiring harnesses in industrial control, telecommunications, and computer equipment where compact, reliable interconnects are required. The RoHS3 compliant, REACH unaffected, and MSL 1 status make it suitable for lead-free assembly processes.</p>

<p>The TE Connectivity 1743218-5 is a rectangular connector header designed for board-to-cable/wire applications. It comes in a right-angle through-hole mounting configuration with solder termination. The connector has 4 positions arranged in a single row with a 2.54mm pitch, making it compatible with standard 0.100 inch spacing headers. The header features a male pin contact type with square-shaped contacts made from phosphor bronze and finished with tin for reliable conductivity. The insulation housing is made from glass-filled polybutylene terephthalate (PBT) in a yellow color, with a height of 10.80mm and includes a shrouded 4-wall design for improved mating alignment. A latch holder fastening type ensures secure connection with the mating cable assembly. Additionally, the header includes mounting flanges for mechanical stability on the PCB.</p>