TE Connectivity

<p>The TE Connectivity 350830-1 is a rectangular header connector featuring 15 positions in a 3-row configuration with a 6.35mm (0.250") pitch. It uses female socket contacts and is designed for board to cable/wire interconnection. The connector is through hole mounted with solder termination and includes a locking ramp fastening mechanism for secure mating.</p><p>&nbsp;</p><p>Contact finish is tin, with a contact length of 3.94mm (0.155"). The insulation is natural color with a height of 13.97mm (0.550") and a flammability rating of UL94 V-0. All 15 positions are loaded. The row spacing is also 6.35mm. This component is RoHS3 compliant, MSL 1 (unlimited), and REACH unaffected.</p>

<p>The TE Connectivity 1-2834075-2 is a 2 position receptacle housing designed for pin contacts in solid state lighting connector assemblies. It features a free hanging (in-line) mounting style and uses crimp termination for secure wire connections.</p><p>&nbsp;</p><p>The housing is made of white Polybutylene Terephthalate (PBT) material and has a 2.50mm pitch. It uses a latch holder fastening type for reliable mating. The operating temperature range is -40°C to 105°C, suitable for various lighting applications.</p><p>&nbsp;</p><p>This connector housing is part of TE Connectivity's miniature waterproof connector series, designed for cable/wire to cable/wire connections in solid state lighting systems.</p>

<p>The TE Connectivity 964285-2 is a power socket contact designed for rectangular connector systems, part of the JUN-POW-TIM series. It uses crimp termination for secure wire attachment, accommodating 17-20 AWG wire gauges. The contact material is tin-plated, providing good conductivity and corrosion resistance. This contact is suitable for power distribution applications within rectangular connector housings.</p><p>&nbsp;</p><p>The crimp-style termination offers reliable, gas-tight connections ideal for production environments. The tin finish ensures compatibility with a wide range of mating surfaces and environmental conditions. The part is marked as RoHS3 compliant and REACH unaffected, though these compliance statuses remain unverified.</p><p>&nbsp;</p><p>Designed for use in power and signal circuit applications, this contact is commonly employed in automotive, industrial, and consumer electronics where rectangular connectors are specified. For complete assembly, appropriate housing and insertion tooling are required.</p>

<p>The TE Connectivity 140805-2 is a female quick disconnect terminal from the PIDG FASTON series. Designed for free hanging (in-line) mounting, this terminal uses a reliable crimp termination method to secure 17-22 AWG wire. The tab dimensions are 0.197" (5.00mm) width, 0.031" (0.79mm) thickness, and 0.311" (7.90mm) length.</p><p>&nbsp;</p><p>The contact is made of brass with a silver finish, ensuring good electrical conductivity and resistance to corrosion. The terminal is color-coded red, indicating its wire size range. The non-mating end is insulated, which helps prevent short circuits and accidental contact with live conductors.</p><p>&nbsp;</p><p>This component is commonly used in power and signal connections where a secure, quick-disconnect interface is needed. The PIDG (Pre-Insulated Diamond Grip) design provides a firm crimp and strain relief for the wire insulation.</p>

<p>The TE Connectivity 280074-2 is a male quick connect tab terminal designed for wire sizes 7-10 AWG. It features a standard tab width of 0.375 inches (9.53 mm) with a tab thickness of 0.048 inches (1.22 mm) and a tab length of 0.843 inches (21.4 mm). The terminal is non-insulated and uses a crimp termination method for secure wire attachment. The contact is made of brass with a tin finish, providing good conductivity and corrosion resistance. The mounting type is free hanging (in-line), making it suitable for applications where a quick disconnect connection is needed. This terminal is commonly used in power distribution, automotive, and industrial equipment requiring reliable wire-to-wire connections.</p>

<p>The TE Connectivity 1734577-4 is a single-port modular jack designed for 8P8C (RJ45) connectors commonly used in Ethernet applications. It features a vertical orientation and through-hole mounting with solder termination for reliable PCB attachment.</p><p>&nbsp;</p><p>The connector is fully shielded to reduce electromagnetic interference and includes a board lock for secure mechanical retention. It is equipped with green and yellow LED indicators for status or link/activity signaling. The contacts are made of phosphor bronze with a gold finish, ensuring reliable electrical performance over repeated mating cycles.</p><p>&nbsp;</p><p>Rated for Category 3 (Cat3) applications, this jack is suitable for basic networking and telecommunication equipment. The user-selectable tab direction offers flexibility in cable routing and panel design.</p>

<p>The 2-5221128-3 is a BNC plug connector from TE Connectivity featuring a male pin contact. It is designed for 50 Ohm impedance and supports frequencies up to 4 GHz, making it suitable for RF applications. The connector uses crimp termination for both the center contact and shield, ensuring reliable connections. It has a free hanging (in-line) mounting style with a bayonet lock fastening mechanism for quick and secure mating. The center contact is made of brass, and the housing has a silver color. This connector is compatible with RG-179 and RG-187 coaxial cables.</p>

<p>The TE Connectivity 5749621-5 is a 50-position D-sub plug connector designed for signal applications. It uses a D-Type shell layout with 0.050 inch contact pitch and 0.100 inch row spacing, accommodating two rows of male pins with gold contact finish.</p><p>&nbsp;</p><p>This connector terminates to ribbon cable via an IDC (Insulation Displacement Connection) method, making it well-suited for mass-termination cable assemblies. It features a free hanging (in-line) mounting style and is shielded to provide electromagnetic interference protection.</p><p>&nbsp;</p><p>The shell is constructed from steel with a tin-nickel plated finish, and the insulator is rated UL94 V-0 for flammability. Each contact is rated for 1A current. This connector is commonly used in data and telecommunications equipment where reliable, shielded D-sub connections are required.</p>

<p>The TE Connectivity 747944-5 is a 9-position D-Sub plug connector kit from the AMPLIMITE HDE series. It is designed for cable-to-cable applications and features IDC (Insulation Displacement) termination for discrete wire or round jacketed cable with wire sizes 26-22 AWG. The connector is shielded with a steel shell and tin plating, providing EMI protection. The contacts are gold-plated phosphor bronze with a mating area plating thickness of 0.76 µm, ensuring reliable signal integrity. The connector is rated for a maximum current of 5A per contact and operates over a temperature range of -55°C to 105°C. The housing uses a thermoplastic insert with UL94 V-0 flammability rating. The kit includes a backshell, cover, mounting screws, and grounding indents. The connector is packaged as a single unit.</p>

<p>This hook-up wire, part number 55PC0211-22-9, is manufactured by TE Connectivity. It features a 22 AWG tinned copper conductor with 19/34 stranding, providing flexibility and corrosion resistance. The insulation is radiation-crosslinked, modified ETFE, rated for 600V RMS at sea level and a continuous conductor temperature of 150°C. The wire has a nominal conductor diameter of 0.0455 inches, a jacket diameter of 0.455 inches, and a jacket thickness of 0.008 inches. The maximum resistance at 20°C is 13.33 ohms per 1000 feet, and the weight is 2.90 pounds per 1000 feet. The wire is designed for general purpose light airframe applications and is available in a 10000-foot spool. Insulation is spark tested at 3.0 kVrms and impulse dielectric tested at 8.0 kV. The color is white, with crosslink verification performed at 300°C for 1 hour.</p>

<p>The TE Connectivity 174359-2 is a 3-position receptacle housing from the 070 Econoseal Mark II series. It is designed for use with 1.8mm x 0.64mm male pin contacts and uses a crimp termination method. The housing is sealed, making it suitable for applications where moisture and dust ingress must be minimized.</p><p>&nbsp;</p><p>Key specifications include a single row layout with 4.80mm pitch, and a free hanging (in-line) mounting style. The operating temperature range is -30°C to 105°C, and the current rating is 0 to 24 A (low power). The housing is black in color and is made for use in automotive, truck, bus, and off-road vehicle wiring systems.</p><p>&nbsp;</p><p>This connector housing is part of the Econoseal family, known for reliable performance in harsh environments. It is compatible with matching male pin terminals and is often used in engine control modules, sensor connections, and power distribution systems.</p>

<p>The TE Connectivity 164164-1 is a stamped pin contact designed for 16-18 AWG wire. It is constructed from copper alloy with a tin plating finish of 78.7µin (2.00µm) thickness. The contact uses a crimp termination style for secure wire attachment. This pin contact is suitable for use in multi-purpose connector systems requiring reliable signal or power connections. The part is listed as RoHS3 compliant, though this status is unverified.</p>

<p>The TE Connectivity 103309-8 is a 40-position, 2-row shrouded header designed for board-to-cable/wire applications. It features a 2.54mm (0.100") pitch and row spacing, with all positions loaded. The header is shrouded on all four walls and includes a keying slot for proper alignment. Contacts are made of brass with a tin-lead finish (30.0µin thickness) and have a square shape. The insulation is black UL94 V-0 rated material. This through-hole component is terminated by solder and uses a push-pull fastening type. It is rated for 1A per contact and operates over a temperature range of -65°C to 105°C.</p>

<p>The TE Connectivity 104666-6 is a 100-position, 2-row shrouded header designed for board-to-board or cable applications. It features a 1.27mm (0.050") pitch and a through hole mounting style with solder termination. The connector is shrouded with a 2-wall design and includes a latch holder fastening type for secure mating.</p><p>&nbsp;</p><p>The header uses male pin contacts made of copper alloy with a tin-lead plating (30.0µin / 0.76µm). The insulation is black thermoplastic rated UL94 V-0 for flammability. The insulation height is 9.91mm (0.390") and the row spacing is 2.54mm (0.100"). All 100 positions are loaded.</p><p>&nbsp;</p><p>This connector is rated for 30VAC and has an operating temperature range of -65°C to 105°C. It is suitable for a variety of interconnection needs where high pin count and compact pitch are required.</p>

<p>The TE Connectivity 6-1437719-0 is a 5-position circular connector receptacle with female socket contacts. It is designed for panel mount installation with through hole, right angle solder termination. The bulkhead mounting feature provides secure panel attachment.</p><p>&nbsp;</p><p>Electrical characteristics include a 3 A current rating and 60 VAC voltage rating. The connector is shielded for EMI protection and rated IP65 for dust tightness and water resistance. Operating temperature ranges from -40°C to 85°C, and the insert material has a UL94 V-2 flammability rating.</p><p>&nbsp;</p><p>Mechanical features include threaded fastening for secure mating, keyed orientation for proper alignment, and a board lock for PCB retention. The shell is made of brass with a Tribor finish, and contact material is metal.</p><p>&nbsp;</p><p>This connector is suitable for industrial, outdoor, and panel-mount applications requiring reliable, sealed connections in harsh environments.</p>

<p>The TE Connectivity 213899-1 is a wire entry seal kit designed for use with CPC (Circular Plastic Connector) plug and receptacle housings. It is intended for shell size 17-3. The seal kit is made of silicone material and comes in black color. It includes a pressure plate for secure installation. This accessory provides environmental sealing for wire entry points in circular connector assemblies. It is RoHS3 compliant and has an MSL of 1 (unlimited). The part is also REACH unaffected. Note: Compliance data is unverified. The kit is suitable for applications requiring reliable sealing in connector systems.</p>

<p>The TE Connectivity 5646445-1 is a Z-PACK 2mm HM hard metric backplane connector receptacle designed for board-to-board mezzanine applications. It offers 200 signal positions arranged in 8 rows and 25 columns with a 2.00mm pitch, providing high-density interconnection in backplane systems.</p><p>&nbsp;</p><p>Electrically, the connector supports data rates up to 1 Gb/s and a maximum current rating of 1.5 A per contact. It operates over a temperature range of -55°C to 125°C. Contacts are made of phosphor bronze with a gold mating area plating of 0.76µm thickness and tin termination plating.</p><p>&nbsp;</p><p>Mechanically, the receptacle is right angle mounted to the board using press-fit termination, suitable for board edge through-hole mounting. The gray polyester GF housing has a UL 94V-0 flammability rating. The shielded design is not provided, as this is a signal-only component.</p><p>&nbsp;</p><p>The connector is packaged in a tube of 10 units. It is compliant with RoHS, EU ELV, and China RoHS directives. This part is ideal for telecommunications, data communications, and industrial backplane systems requiring reliable hard metric interconnects.</p>

<p>This TE Connectivity 5-1532137-7 is a slotted jackscrew socket designed for D-Sub connectors. It features a 2-56 thread size and a length of 6.35mm (0.250 inches). The accessory includes retainer rings for secure mounting. It meets MIL-Spec M83513/05-05. The part is EU RoHS and EU ELV compliant, and does not contain restricted materials above threshold under China RoHS 2. However, it is not low halogen. REACH SVHC status is not yet reviewed. Moisture sensitivity level is 1 (unlimited).</p>

<p>This is a 10-position, single-row header from TE Connectivity with a 1.5mm pitch. It features male pins with square contacts made of brass with a tin finish (100µin). The connector is shrouded with a 4-wall design for robust mating.</p><p>&nbsp;</p><p>The header is surface mounted with a right-angle orientation, making it suitable for space-constrained designs. It is rated for 3A current and 250VAC voltage, with an operating temperature range of -55°C to 105°C. The insulation material is thermoplastic with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This connector is designed for board-to-cable/wire applications. The contact length is 2.70mm and insulation height is 4.45mm. The natural color insulation provides visual identification. It is RoHS3 compliant and has an MSL of 1 (unlimited).</p>